- 18 Aug, 2020 6 commits
-
-
Kalle Valo authored
This macro is evil as it's accesses ab variable in a hidden way. It's better for readibility to access ab->hw_params.ce_count directly. This is done in a separate patch to keep the patches simple. No functional changes. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-6-git-send-email-kvalo@codeaurora.org
-
Kalle Valo authored
This macro is evil as it's accesses ab variable in a hidden way. It's better for readibility to access ab->hw_params.host_ce_config directly. This is done in a separate patch to keep the patches simple. No functional changes. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
QCA6390 uses only 9 Copy Engines while IPQ8074 may use 12, make it possible to change CE configuration dynamically via hw_params. The defines for host_ce_config_wlan and CE_COUNT are temporary solutions, they will be removed in the following patches to keep things simple. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
Carl Huang <cjhuang@codeaurora.org> Signed-off-by:
-
Kalle Valo authored
Now some of the HAL register macros access ab variable in a hidden way, make ab variable visible in the macro by adding it as an argument. This is done in a separate patch to keep the patches simple. No functional changes. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
QCA6390 has different register offset compared to IPQ8074, so need to attach the register offset dynamically based on hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Kalle Valo authored
There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move it to ath10k_core_start() instead. This way it's possible to call ath10k_bmi_start() from sdio.c during firmware dump creation. And also the function call is more visible when it's in core.c. No functional changes, compile tested only. Signed-off-by:
-
- 17 Aug, 2020 34 commits
-
-
Bryan O'Donoghue authored
Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here. This patch fixes the data-rate declared in the 5GHz table. Fixes: 8e84c258 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Christophe JAILLET authored
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. Fixes: 18630083 ("ath10k: fix shadow register implementation for WCN3990") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks it as untrusted so we have to check it before using it as an array offset. This is similar to a bug that syzkaller found in commit e4ff08a4 ("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is probably a real issue. Fixes: fb9987d0 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Masashi Honma authored
kernel test robot says: drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: expected restricted __be16 [usertype] rs_datalen drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: got unsigned short [usertype] drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer Indeed rs_datalen has host byte order, so modify it's own type. Reported-by:
kernel test robot <lkp@intel.com> Fixes: cd486e62 ("ath9k_htc: Discard undersized packets") Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
-
Alexander Wetzel authored
The ath9k driver was so far only able to rekey PTK0 keys correctly due to the best effort queue flush added with commit 62872a9b ("mac80211: Fix PTK rekey freezes and clear text leak"). Add the needed queue flush and set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to tell mac80211 that the driver can now rekey PTK0 keys correctly and no longer needs the best effort flush. Effectively this prevents mac80211 to warn when rekeying a PTK0 key only. Signed-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by:
-
Dan Carpenter authored
The value for "aid" comes from skb->data so Smatch marks it as untrusted. If it's invalid then it can result in an out of bounds array access in ath6kl_add_new_sta(). Fixes: 572e27c0 ("ath6kl: Fix AP mode connect event parsing and TIM updates") Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in an ath6kl_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
-
Lee Jones authored
Kerneldoc expects attributes/parameters to be in '@*.: ' format and gets confused if the variable does not follow the type/attribute definitions. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath5k/base.c:1111: warning: Function parameter or member 'ah' not described in 'ath5k_drain_tx_buffs' Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@winlab.rutgers.edu> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
No effort has been made to document any of the function parameters here. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies_len' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie_len' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1_len' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2_len' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_ies' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_len' not described in '_wil_cfg80211_merge_extra_ies' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath5k/pcu.c:115: warning: Function parameter or member 'band' not described in 'ath5k_hw_get_frame_duration' drivers/net/wireless/ath/ath5k/pcu.c:955: warning: Excess function parameter 'mode' description in 'ath5k_hw_pcu_init' Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Reyk Floeter <reyk@openbsd.org> Cc: "W. S. Bell" <mentor@madwifi.org> Cc: Luis Rodriguez <mcgrof@winlab.rutgers.edu> Cc: Pavel Roskin <proski@gnu.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
-
Kalle Valo authored
On QCA6390 reg_start and reg_size values are different from IPQ8074 so we need to change the values runtime. As we can't modify a static const variable hw_srng_config directly, instead use it as a template, copy it and modify the copy with correct values. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
On x86 and other non-qcom platforms, host needs to explicitly tell the firmware to use the internal sleep clock. Some QCA6390 modules have OTP burnt with external sleep clock selected, and these modules can't work expectedly unless firmware selects internal sleep clock. Add a field to hw_params to support this difference. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
It's caused by reading memory out of boundary from target_ce_config_wlan. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
The decoded_size is wrongly assigned in ath11k_qmi_msg_handlers and it results in out of boundary access in qmi_decode. The correct decoded_size should be calculated from the related ind_msg structure. This issue is exposed with QCA6390 because it needs 11 small memory chunks which are stored in qmi_wlanfw_request_mem_ind_msg_v01 and hence the decoded_size exceeds the wrongly assigend decoded_size. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
On x86 it's sometimes difficult to allocate a large contigous DMA memory, so instead allocate blocks of small chunk memory. In ath11k_qmi_msg_mem_request_cb() the error handling was cleaned up to avoid an unused variable warning. Also changed the test from (ret < 0) to just (ret) as the functions don't return any positive values. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
CE srng is used for control path and CE srng processing is done using tasklet bottom half. Setup ce tasklet initialization and scheduling for control path. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
Govind Singh <govinds@codeaurora.org> Signed-off-by:
-
Govind Singh authored
Fill msi base address and msi data to be programmed in CE srang. This is used by the srng to generate the msi interrupt. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
Add support for bus read/write/window selection operations for reading hardware memory. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
QMI service instance id is used for qmi service lookup, IPQ8074 and QCA6390 uses different instance id for service lookup. Fill appropriate QMI service instance id for respective targets. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
PCI devices like QCA6390 load the board file differently, add support for that and the method is chosen using bus_params variables. Add support to create board name for different targets. This board name is used to parse the board data from board-2.bin for ahb/pci based targets. As struct target_mem_chunk::vaddr was changed from 'u32' to 'u32 *' in ath11k_qmi_assign_target_mem_chunk() vaddr assignments were changed to NULL to avoid a compilation warning. IPQ8074 does not use the vaddr field for anything so that change does not affect functionality. At the moment this only supports board files with BIN type. Support for ELF type, which seems to be more popular on QCA6390 devices, needs to be added later. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
PCI devices like QCA6390 have a separate firmware image for the m3 micro-controller. Add support to load the firmware using m3.bin file. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
QCA6390 and other PCI devices use MHI based firmware loading and do not use remoteproc, so enable it only for AHB devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
Define CE pipe/qmi config and setup pci irq for the same. Call ath11k_core_init(). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
Modem Host Interface (MHI) is a communication protocol to communicate with external Qualcomm modems and Wi-Fi chipsets over high speed peripheral buses. Even though MHI doesn’t dictate underlying physical layer, protocol and MHI stack is structured for PCI based devices. Register directly with MHI subsystem as a MHI device driver for firmware download to QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Kalle Valo authored
This is needed to initialise hw_params before MHI registration starts. MHI needs location of firmware directory and that's delivered via hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
QCA6390 uses PCI MSI for CE/MHI/DP interrupt. Add MSI vector mapping and MSI enable/disable operations. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
Add support for setting up pci region and dma mask. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Govind Singh authored
QCA6390 is a PCI based 11ax chipset, split AHB into own kernel module ath11k_ahb.ko and add ath11k_pci.ko for PCI devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Kalle Valo authored
This is needed for splitting ahb and pci modules as they have different ring mask settings. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
Define own firmware directory and settings for QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
Carl Huang authored
With only IPQ8074 supported ath11k was only usable on Qualcomm architectures. But now that we are adding QCA6390 PCI support to ath11k that's not the case anymore and it can be used on any architecture supporting PCI. So remove the dependency on ARCH_QCOM. After that there is also no need to depend on COMPILE_TEST. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by:
-
