From Tony Prisk:

Update arch-vt8500 and drivers to device tree and
remove existing non-dt code.

* tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code:
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

Resolved add/change conflict in drivers/clk/Makefile.
Signed-off-by: Olof Johansson <olof@lixom.net>

* 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ARM: ux500: Add nodes for the MSP into the HREF Device Tree
  ARM: ux500: Add all known I2C sub-device nodes to the HREF DT
  ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled
  ARM: ux500: Stop registering Audio devices for HREF when DT is enabled
  ARM: ux500: Add all encompassing sound node to the Snowball Device Tree
  ARM: ux500: Add nodes for the MSP into Device Tree
  ARM: ux500: Rename MSP board file to something more meaningful
  ARM: ux500: Remove platform registration of MSP devices
  ARM: ux500: Stop registering the MOP500 Audio driver from platform code
  ARM: ux500: Pass MSP DMA platform data though AUXDATA
  ARM: ux500: Fork MSP platform registration for step-by-step DT enablement
  ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree
  ARM: ux500: Clean-up MSP platform code
  ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
  ARM: ux500: Add UART support to the HREF Device Tree
  ARM: ux500: Add skeleton Device Tree for the HREF reference board
  ...
  + sync to v3.6-rc6

Merged existing board files to a single dt-capable file.
Converted irq and timer code to devicetree.
Removed existing device files that are no longer required with
devicetree support.
All existing platform devices are converted to devicetree nodes
except PWM.

Removed restart.c and moved code into vt8500.c to remove
duplicate PMC code.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Converted the existing arch-vt8500 gpio to a platform_device.
Added support for WM8505 and WM8650 GPIO controllers.
Replaced existing readl/writel calls with _relaxed variants.
Replaced existing unsigned variables with u32 to match register size.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Bindings for gpio, interrupt controller, power management controller,
timer, realtime clock, serial uart, ehci and uhci controllers and
framebuffer controllers used on the arch-vt8500 platform.

Framebuffer binding also specifies a 'display' node which is required
for determining the lcd panel data.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>

This patch adds common clock framework support for arch-vt8500.
Support for PLL and device clocks on VT8500, WM8505 and WM8650
are included.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>

Update vt8500-fb, wm8505-fb and wmt-ge-rops to support device
tree bindings.
Small change in wm8505-fb.c to support WM8650 framebuffer color
format.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>

Increase vt8500_max_ports to 6 as the WM8505 as 6 available uarts.
Use devicetree port id as primary addressing for ports but allow
auto-allocation if id not specified.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Alan Cox <alan@linux.intel.com>

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree files for VT8500, WM8505 and WM8650 SoC's and
reference boards.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>

From Shawn Guo:
This is the second round of imx-dt patches for 3.7.  It's based on
and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled.

* tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx6q-sabrelite: add usbmisc device

From Shawn Guo:
This is the second round of mxs-dt patches for 3.7.  It's based on
mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc.

* tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: m28evk: Disable OCOTP OUI loading
  ARM: dts: imx23-olinuxino: Add USB host support
  ARM: dts: mx23: Add USB resources
  ARM: dts: mxs: Add ethernetX to macX aliases

Merge tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt

ARM: tegra: second round of device tree changes

This branch includes some late device tree changes for Tegra:

A property is added to Whistler's device tree to enable the PMIC to
act as the pm_power_off() implementation.

A number of new device tree are added for boards from Avionic Design.

* tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: dt: tegra: whistler: configure power off

Merge branch 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:

Since there are many changes for gpio-samsung in my tree, this has been
included in my tree with Linus' agreement.

* 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  gpio: samsung: add devicetree init for s3c24xx arches

Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

The Tamonten Evaluation Carrier is an evaluation board for the Tamonten
SOM. More information is available here:

	http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.htmlSigned-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The Medcom is a 16:9 15" terminal that is used for patient infotainment
in hospitals.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The Plutux is a set-top box device based on the Tamonten SOM and can be
connected to a display via HDMI.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The Tamonten is an NVIDIA Tegra2 based system-on-module (SOM) that is
designed to cover a broad range of applications.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

PWM devices can be referenced in the DT by phandle and per-chip index.
In order for this to work properly, the PWM controller needs to have a
label attached to it.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

SSP won't probe unless the specified register address format
is correct i.e. we have to specify that the address is in hex.
After this patch has been applied, the SSP (SPI) driver probes
as expected.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch ensures the tc3589x and tc3598x-gpio devices are
rightfully given interrupt controller status. We also describe
the tc3598x-gpio GPIO expander in full and specify it as a GPIO
controller. Finally we reference that the external MMC slot's
Card Detection GPIO on the HREF is located on the tc3598x-gpio
expander.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This property has no place here as the populated node is not related
to a GPIO controller.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This is where we link together all of the SoC sound components for
a given platform. This all encompassing sound node is only found
in the very lowest hierarchical DTS file, since the component mix may
well change from board variant to board variant.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch enables the two important MSP devices for ST-Ericsson's
hardware reference development board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Here we add the skeleton nodes for each of the known I2C sub-devices
currently registered on ST-Ericsson's HREF Development Platform. We
will fill these nodes in turn as the drivers are enabled for Device
Tree.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Here we remove all calls to register I2C sub-devices from platform
code when Device Tree is enabled. Instead the I2C driver will parse
the Device Tree for them.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This is where we link together all of the SoC sound components for
a given platform. This all encompassing sound node is only found
in the very lowest hierarchical DTS file, since the component mix may
well change from board variant to board variant.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch inserts all known MSP devices into the DBx5x0 Device Tree
disabled and enables the two important ones for the Snowball low-cost
development board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The 'msp' board file does more than just register MSP devices. It
also registers some other components necessary to get audio working
on ux500 based platforms; such as the PCM and Machine Drivers. For
that reason we're changing the filename to be more encompassing -
'audio'.
Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch removes platform device registration of all 4 MSP
devices. It also takes care of all redundant infrastructure now
that each of the ux500 audio components have been Device Tree
enabled.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

In this patch we prevent MOP500 driver registration from platform
code and rely solely on Device Tree to do the probing for us.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

It isn't currently possible to pass all platform specific configuration
though Device Tree. Thinks like device names used in the clock
infrastructure, call-backs and DMA information have to be passed in via
AUXDATA structures and the MSP is no exception. Here we're passing DMA
settings.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

We've done this before and it worked well last time. Here we're
duplicating a complex registration function to ease the process
of enabling it for Device Tree. As there are quite a few steps
taken during the registration process, it makes sense to break
them up into more manageable chunks. This patch will aid us.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Ensure correct probing and pass though important configuration
options to the AB8500 CODEC driver when DT is enabled
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This patch contains a couple of general MSP clean-ups pertaining to
layout changes and changing functions to be void instead of int instead
of regardlessly returning '0'.
Acked-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

There are four SDIs on the HREF, as opposed to the original two
enabled on Snowball. To get them working we have to pass their DMA
information in the same was as we need with the other two.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Here we add three nodes enabling UART support on the HREF hardware
reference board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

First commit applying the new Device Tree for ST-Ericsson's u8500
based hardware reference board.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>