1. 13 Dec, 2015 3 commits
    • Filipe Manana's avatar
      Btrfs: fix file corruption and data loss after cloning inline extents · db45aeb4
      Filipe Manana authored
      commit 8039d87d upstream.
      
      Currently the clone ioctl allows to clone an inline extent from one file
      to another that already has other (non-inlined) extents. This is a problem
      because btrfs is not designed to deal with files having inline and regular
      extents, if a file has an inline extent then it must be the only extent
      in the file and must start at file offset 0. Having a file with an inline
      extent followed by regular extents results in EIO errors when doing reads
      or writes against the first 4K of the file.
      
      Also, the clone ioctl allows one to lose data if the source file consists
      of a single inline extent, with a size of N bytes, and the destination
      file consists of a single inline extent with a size of M bytes, where we
      have M > N. In this case the clone operation removes the inline extent
      from the destination file and then copies the inline extent from the
      source file into the destination file - we lose the M - N bytes from the
      destination file, a read operation will get the value 0x00 for any bytes
      in the the range [N, M] (the destination inode's i_size remained as M,
      that's why we can read past N bytes).
      
      So fix this by not allowing such destructive operations to happen and
      return errno EOPNOTSUPP to user space.
      
      Currently the fstest btrfs/035 tests the data loss case but it totally
      ignores this - i.e. expects the operation to succeed and does not check
      the we got data loss.
      
      The following test case for fstests exercises all these cases that result
      in file corruption and data loss:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
        tmp=/tmp/$$
        status=1	# failure is the default!
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        _cleanup()
        {
            rm -f $tmp.*
        }
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
      
        # real QA test starts here
        _need_to_be_root
        _supported_fs btrfs
        _supported_os Linux
        _require_scratch
        _require_cloner
        _require_btrfs_fs_feature "no_holes"
        _require_btrfs_mkfs_feature "no-holes"
      
        rm -f $seqres.full
      
        test_cloning_inline_extents()
        {
            local mkfs_opts=$1
            local mount_opts=$2
      
            _scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
            _scratch_mount $mount_opts
      
            # File bar, the source for all the following clone operations, consists
            # of a single inline extent (50 bytes).
            $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
                | _filter_xfs_io
      
            # Test cloning into a file with an extent (non-inlined) where the
            # destination offset overlaps that extent. It should not be possible to
            # clone the inline extent from file bar into this file.
            $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
                | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo
      
            # Doing IO against any range in the first 4K of the file should work.
            # Due to a past clone ioctl bug which allowed cloning the inline extent,
            # these operations resulted in EIO errors.
            echo "File foo data after clone operation:"
            # All bytes should have the value 0xaa (clone operation failed and did
            # not modify our file).
            od -t x1 $SCRATCH_MNT/foo
            $XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io
      
            # Test cloning the inline extent against a file which has a hole in its
            # first 4K followed by a non-inlined extent. It should not be possible
            # as well to clone the inline extent from file bar into this file.
            $XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
                | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2
      
            # Doing IO against any range in the first 4K of the file should work.
            # Due to a past clone ioctl bug which allowed cloning the inline extent,
            # these operations resulted in EIO errors.
            echo "File foo2 data after clone operation:"
            # All bytes should have the value 0x00 (clone operation failed and did
            # not modify our file).
            od -t x1 $SCRATCH_MNT/foo2
            $XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io
      
            # Test cloning the inline extent against a file which has a size of zero
            # but has a prealloc extent. It should not be possible as well to clone
            # the inline extent from file bar into this file.
            $XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3
      
            # Doing IO against any range in the first 4K of the file should work.
            # Due to a past clone ioctl bug which allowed cloning the inline extent,
            # these operations resulted in EIO errors.
            echo "First 50 bytes of foo3 after clone operation:"
            # Should not be able to read any bytes, file has 0 bytes i_size (the
            # clone operation failed and did not modify our file).
            od -t x1 $SCRATCH_MNT/foo3
            $XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io
      
            # Test cloning the inline extent against a file which consists of a
            # single inline extent that has a size not greater than the size of
            # bar's inline extent (40 < 50).
            # It should be possible to do the extent cloning from bar to this file.
            $XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
                | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4
      
            # Doing IO against any range in the first 4K of the file should work.
            echo "File foo4 data after clone operation:"
            # Must match file bar's content.
            od -t x1 $SCRATCH_MNT/foo4
            $XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io
      
            # Test cloning the inline extent against a file which consists of a
            # single inline extent that has a size greater than the size of bar's
            # inline extent (60 > 50).
            # It should not be possible to clone the inline extent from file bar
            # into this file.
            $XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
                | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5
      
            # Reading the file should not fail.
            echo "File foo5 data after clone operation:"
            # Must have a size of 60 bytes, with all bytes having a value of 0x03
            # (the clone operation failed and did not modify our file).
            od -t x1 $SCRATCH_MNT/foo5
      
            # Test cloning the inline extent against a file which has no extents but
            # has a size greater than bar's inline extent (16K > 50).
            # It should not be possible to clone the inline extent from file bar
            # into this file.
            $XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6
      
            # Reading the file should not fail.
            echo "File foo6 data after clone operation:"
            # Must have a size of 16K, with all bytes having a value of 0x00 (the
            # clone operation failed and did not modify our file).
            od -t x1 $SCRATCH_MNT/foo6
      
            # Test cloning the inline extent against a file which has no extents but
            # has a size not greater than bar's inline extent (30 < 50).
            # It should be possible to clone the inline extent from file bar into
            # this file.
            $XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7
      
            # Reading the file should not fail.
            echo "File foo7 data after clone operation:"
            # Must have a size of 50 bytes, with all bytes having a value of 0xbb.
            od -t x1 $SCRATCH_MNT/foo7
      
            # Test cloning the inline extent against a file which has a size not
            # greater than the size of bar's inline extent (20 < 50) but has
            # a prealloc extent that goes beyond the file's size. It should not be
            # possible to clone the inline extent from bar into this file.
            $XFS_IO_PROG -f -c "falloc -k 0 1M" \
                            -c "pwrite -S 0x88 0 20" \
                            $SCRATCH_MNT/foo8 | _filter_xfs_io
            $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8
      
            echo "File foo8 data after clone operation:"
            # Must have a size of 20 bytes, with all bytes having a value of 0x88
            # (the clone operation did not modify our file).
            od -t x1 $SCRATCH_MNT/foo8
      
            _scratch_unmount
        }
      
        echo -e "\nTesting without compression and without the no-holes feature...\n"
        test_cloning_inline_extents
      
        echo -e "\nTesting with compression and without the no-holes feature...\n"
        test_cloning_inline_extents "" "-o compress"
      
        echo -e "\nTesting without compression and with the no-holes feature...\n"
        test_cloning_inline_extents "-O no-holes" ""
      
        echo -e "\nTesting with compression and with the no-holes feature...\n"
        test_cloning_inline_extents "-O no-holes" "-o compress"
      
        status=0
        exit
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      db45aeb4
    • Andrey Ryabinin's avatar
      lockd: create NSM handles per net namespace · ec3b09d0
      Andrey Ryabinin authored
      commit 0ad95472 upstream.
      
      Commit cb7323ff ("lockd: create and use per-net NSM
       RPC clients on MON/UNMON requests") introduced per-net
      NSM RPC clients. Unfortunately this doesn't make any sense
      without per-net nsm_handle.
      
      E.g. the following scenario could happen
      Two hosts (X and Y) in different namespaces (A and B) share
      the same nsm struct.
      
      1. nsm_monitor(host_X) called => NSM rpc client created,
      	nsm->sm_monitored bit set.
      2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
      	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
      3. host X destroyed => nsm->sm_count decremented to 1
      4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
      	dereference of *ln->nsm_clnt
      
      So this could be fixed by making per-net nsm_handles list,
      instead of global. Thus different net namespaces will not be able
      share the same nsm_handle.
      Signed-off-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
      Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      ec3b09d0
    • Vignesh R's avatar
      spi: ti-qspi: Fix data corruption seen on r/w stress test · 6fcb802e
      Vignesh R authored
      commit bc27a539 upstream.
      
      Writing invalid command to QSPI_SPI_CMD_REG will terminate current
      transfer and de-assert the chip select. This has to be done before
      calling spi_finalize_current_message(). Because
      spi_finalize_current_message() will mark the end of current message
      transfer and schedule the next transfer. If the chipselect is not
      de-asserted before calling spi_finalize_current_message() then the next
      transfer will overlap with the previous transfer leading to data
      corruption.
      __spi_pump_message() can be called either from kthread worker context or
      directly from the calling process's context. It is possible that these
      two calls can race against each other. But race is serialized by
      checking whether master->cur_msg == NULL (pointer to msg being handled
      by transfer_one() at present). The master->cur_msg is set to NULL when
      spi_finalize_current_message() is called on that message, which means
      calling spi_finalize_current_message() allows __spi_sync() to pump next
      message in calling process context.
      Now if spi-ti-qspi calls spi_finalize_current_message() before we
      terminate transfer at hardware side, if __spi_pump_message() is called
      from process context then the successive transactions can overlap.
      
      Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to
      before calling spi_finalize_current_message() call.
      Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6fcb802e
  2. 09 Dec, 2015 18 commits
  3. 18 Nov, 2015 2 commits
  4. 16 Nov, 2015 17 commits