After commit 3226b158 ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.

This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.

To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.

Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f ("net: add napi_get_frags_check() helper").

Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.

Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), use unsafe_memcpy(), as the sizing,
bounds-checking, and allocation are all very tightly coupled here.
This silences the false-positive reported by syzbot:

  memcpy: detected field-spanning write (size 80) of single field "&n->sel" at net/sched/cls_u32.c:1043 (size 16)

[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot+a2c4601efc75848ba321@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a96c0b05e97f0444@google.com/Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220927153700.3071688-1-keescook@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The stmmac-axi-config subnode is present in multiple dwmac instance DTs,
document its content per snps,axi-config property description which is
a phandle to this subnode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927012449.698915-1-marex@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

nlmsg_flags are full of historical baggage, inconsistencies and
strangeness. Try to document it more thoroughly. Explain the meaning
of the ECHO flag (and while at it clarify the comment in the uAPI).
Handwave a little about the NEW request flags and how they make
sense on the surface but cater to really old paradigm before commands
were a thing.

I will add more notes on how to make use of ECHO and discouragement
for reuse of flags to the kernel-side documentation.

Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from wifi and can.

  Current release - regressions:

   - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()

   - wifi: fix locking in mac80211 mlme

   - eth:
      - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
      - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe

  Previous releases - regressions:

   - wifi: fix regression with non-QoS drivers

  Previous releases - always broken:

   - mptcp: fix unreleased socket in accept queue

   - wifi:
      - don't start TX with fq->lock to fix deadlock
      - fix memory corruption in minstrel_ht_update_rates()

   - eth:
      - macb: fix ZynqMP SGMII non-wakeup source resume failure
      - mt7531: only do PLL once after the reset
      - usbnet: fix memory leak in usbnet_disconnect()

  Misc:

   - usb: qmi_wwan: add new usb-id for Dell branded EM7455"

* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
  mptcp: fix unreleased socket in accept queue
  mptcp: factor out __mptcp_close() without socket lock
  net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
  net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
  can: c_can: don't cache TX messages for C_CAN cores
  ice: xsk: drop power of 2 ring size restriction for AF_XDP
  ice: xsk: change batched Tx descriptor cleaning
  net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
  selftests: Fix the if conditions of in test_extra_filter()
  net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
  net: stmmac: power up/down serdes in stmmac_open/release
  wifi: mac80211: mlme: Fix double unlock on assoc success handling
  wifi: mac80211: mlme: Fix missing unlock on beacon RX
  wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
  wifi: mac80211: fix regression with non-QoS drivers
  wifi: mac80211: ensure vif queues are operational after start
  wifi: mac80211: don't start TX with fq->lock to fix deadlock
  wifi: cfg80211: fix MCS divisor value
  net: hippi: Add missing pci_disable_device() in rr_init_one()
  net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
  ...

Pull input fixes from Dmitry Torokhov:

 - small fixes for iqs62x-keys and melfas_mip4 drivers

 - corrected register address in snvs_pwrkey driver

 - Synaptic driver will stop trying to use intertouch (native) mode on
   some Lenovo AMD devices

* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
  Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
  Input: iqs62x-keys - drop unused device node references
  Input: melfas_mip4 - fix return value check in mip4_probe()

Pull ATA fixes from Damien Le Moal:
 "Three late patches to fix problems discovered recently:

   - Add a horkage to disable link power management by default for the
     Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)

   - Two patches to fix setting the maximum queue depth of libsas owned
     ATA devices (from me)"

* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-sata: Fix device queue depth control
  ata: libata-scsi: Fix initialization of device queue depth
  libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205

Merge tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some trivial fixes and cleanup"

* tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Clean up loongson3_smp_ops declaration
  LoongArch: Fix and cleanup csr_era handling in do_ri()
  LoongArch: Align the address of kernel_entry to 4KB

Add __init/__exit annotations to module init/exit funcs
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220928031708.89120-1-ruanjinjie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The 'mem' returned by platform_get_resource() has been checked in probe
function, so it is no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927151406.797800-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Link: https://lore.kernel.org/r/20220927141835.19221-1-shangxiaojing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

After commit 6870957e("liquidio: make soft command calls synchronous"), no
one use struct lio_trusted_vf_ctx, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220927133940.104181-1-yuancan@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20220927111925.2424100-1-liushixin2@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927024511.14665-1-shangxiaojing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927023043.17769-1-shangxiaojing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use skb_put_data() instead of skb_put() and memcpy(), which is shorter
and clear. Drop the tmp variable that is not needed any more.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927022802.16050-1-shangxiaojing@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Saeed Mahameed says:

====================
mlx5-updates-2022-09-27

This is Part #1 of 4 parts series to align mlx5's implementation of
XSK (AF_XDP) RX-Qs indexing and management with other vendors:

Maxim Says:
===========

xsk: Bug fixes for frame mapping on striding RQ

Striding RQ relies on the driver mapping RX buffers into the NIC's
virtual memory space. Currently, regadless of the XSK frame size, mlx5e
maps them using MTT, and each mapping's length is PAGE_SIZE. As the
result, the stride size used by striding RQ is also equal to PAGE_SIZE.

This decision has the following issues:

1. In the XSK aligned mode with frame size smaller than PAGE_SIZE, it's
suboptimal. Using 2K strides and 2K pages allows to post twice as fewer
WQEs.

2. MTT is not suitable for unaligned frames, as it requires natural
alignment theoretically, in practice at least 8-byte alignment.

3. Using mapping and stride bigger than the frame has risk of writing
over the bounds of the XSK frame upon receiving packets bigger than MTU,
which is possible in some specific configurations.

This series addresses issues 1 and 2 and alleviates issue 3. Where
possible, page and stride size will match the XSK frame size (firmware
upgrade may be needed to have effect for 2K frames). Unaligned mode will
use KSM instead of MTT, which allows to drop the partial workaround [1].

[1]: https://lore.kernel.org/netdev/YufYFQ6JN91lQbso@boxer/T/
====================

Link: https://lore.kernel.org/r/20220927203611.244301-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some of the parameters of striding RQ are compile-time constants, but
they are going to become dynamically calculated at runtime in a
following commit. This commit prepares the datapath to take cached
runtime parameters, prefilled at queue creation.

New fields added to struct mlx5e_rq fit into an existing 7-byte hole.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This commit moves the dma_info array to the end of struct mlx5e_mpw_info
to make it a flexible array. It also removes the intermediate struct
mlx5e_umr_dma_info, which used to contain only this array. The
flexibility of dma_info will allow to choose its size dynamically in a
following commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Normally, the MTU change requires reopening the channels, but it can be
skipped if the new MTU doesn't change any of the queue parameters and if
MTU is not used in the data path.

The shortcut is applicable to the non-linear mode of striding RQ,
because the only thing affected by MTU is the queue length. As ethtool
sets the queue length in packets, but striding RQ length is defined in
strides or bytes, we estimate the RQ length to be at least as big as the
requested number of MTU-sized packets, that's why it depends on MTU.

Improve the shortcut by actually checking whether the RQ length stayed
the same, instead of an intermediate step in the calculation.

As MTU also affects the SHAMPO parameters, skip the shortcut if SHAMPO
is in use.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a typical scenario, if an XSK socket is opened first, then an XDP
program is attached, mlx5e_validate_xsk_param will be called twice:
first on XSK bind, second on channel restart caused by enabling XDP. The
validation includes a call to mlx5e_rx_is_linear_skb, which checks the
presence of the XDP program.

The above means that mlx5e_rx_is_linear_skb might return true the first
time, but false the second time, as mlx5e_rx_get_linear_sz_skb's return
value will increase, because of a different headroom used with XDP.

As XSK RQs never exist without XDP, it would make sense to trick
mlx5e_rx_get_linear_sz_skb into thinking XDP is enabled at the first
check as well. This way, if MTU is too big, it would be detected on XSK
bind, without giving false hope to the userspace application.

However, it turns out that this check is too restrictive in the first
place. SKBs created on XDP_PASS on XSK RQs don't have any headroom. That
means that big MTUs filtered out on the first and the second checks
might actually work.

So, address this issue in the proper way, but taking into account the
absence of the SKB headroom on XSK RQs, when calculating the buffer
size.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

One of the checks in mlx5e_rx_is_linear_skb verifies that the RX buffer
fits into the XSK frame size. Remove the duplicating check from
mlx5e_validate_xsk_param. It allows to make mlx5e_rx_get_min_frag_sz
static.

Remove mlx5e_rx_is_xdp altogether, as its only usage is located in a
branch where xsk == NULL.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Linear RX buffers must be big enough to fit the MTU-sized packet along
with the headroom. On the other hand, they must be small enough to fit
into a page (or into an XSK frame). A straightforward way to check
whether the linear mode is possible would be comparing the required
buffer size to PAGE_SIZE or XSK frame size.

Stride size in the linear mode is defined by the following constraints:

1. A stride is at least as big as the buffer size, and it's a power of
two.

2. If non-XSK XDP is enabled, the stride size is PAGE_SIZE, because
mlx5e requires each packet to be in its own page when XDP is in use. The
previous constraint is automatically fulfilled, because buffer size
can't be bigger than PAGE_SIZE.

3. XSK uses stride size equal to PAGE_SIZE, but the following commits
will allow it to use roundup_pow_of_two(XSK frame size), by allowing the
NIC's MMU to use page sizes not equal to the CPU page size.

This commit puts the above requirements and constraints straight to the
code in an attempt to simplify it and to prepare it for changes made in
the next patches.

For the reference, the old code uses an equivalent, but trickier
calculation (high-level simplified pseudocode):

    if XDP or XSK:
        mlx5e_rx_get_linear_frag_sz := max(buffer size, PAGE_SIZE)
    else:
        mlx5e_rx_get_linear_frag_sz := buffer size
    mlx5e_rx_is_linear_skb := mlx5e_rx_get_linear_frag_sz <= PAGE_SIZE
    stride size := roundup_pow_of_two(mlx5e_rx_get_linear_frag_sz)

The new code effectively removes mlx5e_rx_get_linear_frag_sz that used
to return either buffer size or stride size, depending on the situation,
making it hard to work with and to make changes:

    if XDP or XSK:
        mlx5e_rx_get_linear_stride_sz := PAGE_SIZE
    else
        mlx5e_rx_get_linear_stride_sz := roundup_pow_of_two(buffer size)
    mlx5e_rx_is_linear_skb := buffer size <= (PAGE_SIZE or XSK frame sz)
    stride size := mlx5e_rx_get_linear_stride_sz
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of WARNing in runtime when TLS offload WQEs posted to ICOSQ are
over the hardware limit, check their size before enabling TLS RX
offload, and block the offload if the condition fails. It also allows to
drop a u16 field from struct mlx5e_icosq.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

TX MPWQE size is limited to the cacheline-aligned maximum. Use the same
value for the stop room and the capability check.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a typo in the function name: mpqwe -> mpwqe (stands for multi-packet
work queue element).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5e_alloc_xdpsq calculates sq->stop_room internally, but there is
already a function for that: mlx5e_stop_room_for_max_wqe. This commit
makes use of this function.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To shorten and simplify code, let mlx5e_get_sw_max_sq_mpw_wqebbs accept
mdev and derive max SQ WQEBBs from it. Also rename the function to a
more generic name mlx5e_get_max_sq_aligned_wqebbs, because the following
patches will use it in non-MPWQE contexts.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the driver can silently fall back to legacy RQ after enabling
XDP, even if striding RQ was active before. It happens when PAGE_SIZE is
bigger than the maximum supported stride size. This commit changes this
behavior to more straightforward: if an operation (enabling XDP) doesn't
support the current parameters (striding RQ mode), it fails.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5e_verify_rx_mpwqe_strides is only used in en/params.c, so it can be
made static and removed from en/params.h.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No need to keep max_sq_wqebbs in mlx5e_txqsq and mlx5e_xdpsq, as it's
only used when allocating the queues. Removing an extra field reduces
the struct size.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The return value of mlx5e_get_max_sq_wqebbs is clamped down to
MLX5_SEND_WQE_MAX_WQEBBS = 16, which fits into u8. This commit changes
the return type of this function to u8 for stricter type safety.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add the capability that will allow the driver to determine the minimal
MTT page size to be able to map the smallest possible pages in XSK. The
older firmwares that don't have this capability default to 12 (i.e.
4096-byte pages).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
updates from mlx5-next 2022-09-24

Updates form mlx5-next including[1]:

1) HW definitions and support for NPPS clock settings.

2) various cleanups

3) Enable hash mode by default for all NICs

4) page tracker and advanced virtualization HW definitions for vfio

[1] https://lore.kernel.org/netdev/20220907233636.388475-1-saeed@kernel.org/

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Remove from FPGA IFC file not-needed definitions
  net/mlx5: Remove unused structs
  net/mlx5: Remove unused functions
  net/mlx5: detect and enable bypass port select flow table
  net/mlx5: Lag, enable hash mode by default for all NICs
  net/mlx5: Lag, set active ports if support bypass port select flow table
  RDMA/mlx5: Don't set tx affinity when lag is in hash mode
  net/mlx5: add IFC bits for bypassing port select flow table
  net/mlx5: Add support for NPPS with real time mode
  net/mlx5: Expose NPPS related registers
  net/mlx5: Query ADV_VIRTUALIZATION capabilities
  net/mlx5: Introduce ifc bits for page tracker
  RDMA/mlx5: Move function mlx5_core_query_ib_ppcnt() to mlx5_ib
====================

Link: https://lore.kernel.org/all/20220927201906.234015-1-saeed@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Just use kzalloc instead.

Fixes: d6f1e89b ("sunhme: Return an ERR_PTR from quattro_pci_find")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20220928004157.279731-1-seanga2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220927023254.30342-1-shangxiaojing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Rework resource allocation in Felix DSA driver

The Felix DSA driver controls NXP variations of Microchip switches.
Colin Foster is trying to add support in this driver for "genuine"
Microchip hardware, but some of the NXP-isms in this driver need to go
away before that happens cleanly.
https://patchwork.kernel.org/project/netdevbpf/cover/20220926002928.2744638-1-colin.foster@in-advantage.com/

The starting point was Colin's patch 08/14 "net: dsa: felix: update
init_regmap to be string-based", and this continues to be the central
theme here, but things are done differently.

In short (full explanations are in patches), the goal is for MFD-based
switches like Colin's SPI-controlled VSC7512 to be able to request a
regmap that was created 100% externally (by drivers/mfd/ocelot-core.c)
in a very simple way, that does not create dependencies on other
modules. That is dev_get_regmap(), and as input it wants a string, for
the resource name. So we rework the resource allocation in this driver
to be based on string names provided by the specific instantiation (in
Colin's case, ocelot_ext.c).

Patch set was boot-tested on NXP LS1028A.
====================

Link: https://lore.kernel.org/r/20220927191521.1578084-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Existing felix DSA drivers (vsc9959, vsc9953) are all switches that were
integrated in NXP SoCs, which makes them a bit unusual compared to the
usual Microchip branded Ocelot switches.

To be precise, looking at
Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml, one can
see 21 memory regions for the "switch" node, and these correspond to the
"targets" of the switch IP, which are spread throughout the guts of that
SoC's memory space.

In NXP integrations, those targets still exist, but they were condensed
within a single memory region, with no other peripheral in between them,
so it made more sense for the driver to ioremap the entire memory space
of the switch, and then find the targets within that memory space via
some offsets hardcoded in the driver.

The effect of this design decision is that now, the felix driver expects
hardware instantiations to provide their own resource definitions, which
is kind of odd when considering a typical device (those are retrieved
from 'reg' properties in the device tree, using platform_get_resource()
or similar).

Allow other hardware instantiations that share the felix driver to not
provide a hardcoded array of resources in the future. Instead, make the
common denominator based on which regmaps are created be just the
resource "names". Each instantiation comes with its own array of names
that are mandatory for it, and with an optional array of resources.

So we split the resources in 2 arrays, one is what's requested and the
other is what's provided. There is one pool of provided resources, in
felix->info->resources (of length felix->info->num_resources). There are
2 different ways of requesting a resource. One is by enum ocelot_target
(this handles the global regmaps), and one is by int port (this handles
the per-port ones).

For the existing vsc9959 and vsc9953, it would be a bit stupid to
request something that's not provided, given that the 2 arrays are both
defined in the same place.

The advantage is that we can now modify felix_request_regmap_by_name()
to make felix->info->resources[] optional, and if absent, the
implementation can call dev_get_regmap() and this is something that is
compatible with MFD.
Co-developed-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since loongson3_smp_ops is not used in LoongArch anymore, let's remove
it for cleanup.

Fixes: f2ac457a ("LoongArch: Add CPU definition headers")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>