- 21 May, 2022 5 commits
-
-
Jakub Kicinski authored
GCC array bounds checking complains that ulp_id is validated only against upper bound. Make it unsigned. Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220520061955.2312968-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Amit Cohen authored
Commit 49bb39bd ("selftests: fib_nexthops: Make the test more robust") increased the timeout of ping commands to 5 seconds, to make the test more robust. Make the timeout configurable using '-w' argument to allow user to change it depending on the system that runs the test. Some systems suffer from slow forwarding performance, so they may need to change the timeout. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220519070921.3559701-1-amcohen@nvidia.comSigned-off-by:
-
Yang Yingliang authored
Sometimes t7xx_cldma_gpd_set_next_ptr() is called under spin lock, so add 'gfp_mask' parameter in t7xx_cldma_gpd_set_next_ptr() to pass the flag. Fixes: 39d43904 ("net: wwan: t7xx: Add control DMA interface") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20220519032108.2996400-1-yangyingliang@huawei.comSigned-off-by:
-
Rolf Eike Beer authored
Fix typo which breaks build for parisc. Fixes: 3daebfbe ("net: tulip: convert to devres") Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYuCzU5VZ_nc+6NEdBXJdVCH=J2SB1Na1G_NS_0BNdGYtg@mail.gmail.com/Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/4719560.GXAFRqVoOG@eto.sf-tec.deSigned-off-by:
-
Jakub Kicinski authored
When user sets skb_defer_max to 1 the kick threshold is 0 (half of 1). If we increment queue length before the check the kick will never happen, and the skb may get stranded. This is likely harmless but can be avoided by moving the increment after the check. This way skb_defer_max == 1 will always kick. Still a silly config to have, but somehow that feels more correct. While at it drop a comment which seems to be outdated or confusing, and wrap the defer_count write with a WRITE_ONCE() since it's read on the fast path that avoids taking the lock. Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220518185522.2038683-1-kuba@kernel.orgSigned-off-by:
-
- 20 May, 2022 35 commits
-
-
Martin Habets authored
Siena only supports software TSO. This means more code can be deleted, as pointed out by the Smatch static checker warning: drivers/net/ethernet/sfc/siena/tx.c:184 __efx_siena_enqueue_skb() warn: duplicate check 'segments' (previous on line 158) Fixes: 956f2d86 ("sfc/siena: Remove build references to missing functionality") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/kernel-janitors/YoH5tJMnwuGTrn1Z@kili/Signed-off-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/165294463549.23865.4557617334650441347.stgit@palantir17.mph.netSigned-off-by:
-
Jakub Kicinski authored
Looks like the IPv6 version of the patch under Fixes was a copy/paste of the IPv4 but hit the wrong spot. It is tcp_v6_rcv() which uses drop_reason as a boolean, and needs to be protected against reason == 0 before calling free. tcp_v6_do_rcv() has a pretty straightforward flow. The resulting warning looks like this: WARNING: CPU: 1 PID: 0 at net/core/skbuff.c:775 Call Trace: tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1767) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438) ip6_input_finish (include/linux/rcupdate.h:726) ip6_input (include/linux/netfilter.h:307) Fixes: f8319dfd ("net: tcp: reset 'drop_reason' to NOT_SPCIFIED in tcp_v{4,6}_rcv()") Tested-by:Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20220520021347.2270207-1-kuba@kernel.orgSigned-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: a mix of patches This series includes a mix of things things that are generally minor. The first four are sort of unrelated fixes, and summarizing them here wouldn't be that helpful. The last three together make it so only the "configuration data" we need after initialization is saved for later use. Most such data is used only during driver initialization. But endpoint configuration is needed later, so the last patch saves a copy of that. Eventually we'll want to support reconfiguring endpoints at runtime as well, and this will facilitate that. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alex Elder authored
All elements of the default endpoint configuration are used in the code when programming an endpoint for use. But none of the other configuration data is ever needed once things are initialized. So rather than saving a pointer to *all* of the configuration data, save a copy of only the endpoint configuration portion. This will eventually allow endpoint configuration to be modifiable at runtime. But even before that it means we won't keep a pointer to configuration data after when no longer needed. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Rename the just-moved data structure types to drop the "_data" suffix, to make it more obvious they are no longer meant to be used just as read-only initialization data. Rename the fields and variables of these types to use "config" instead of "data" in the name. This is another small step meant to facilitate review. Signed-off-by:
-
Alex Elder authored
Move the definitions of the structures defining endpoint-specific configuration data out of "ipa_data.h" and into "ipa_endpoint.h". This is a trivial movement of code without any other change, to prepare for the next few patches. Signed-off-by:
-
Alex Elder authored
About half of the fields set by the call in ipa_modem_netdev_setup() are overwritten after the call. Instead, just skip the call, and open-code the (other) assignments it makes to the net_device structure fields. Signed-off-by:
-
Alex Elder authored
If we program an RX endpoint to have no header (header length is 0), header-related endpoint configuration values are meaningless and are ignored. The only case we support that defines a header is QMAP endpoints. In ipa_endpoint_init_hdr_ext() we set the endianness mask value unconditionally, but it should not be done if there is no header (meaning it is not configured for QMAP). Set the endianness conditionally, and rearrange the logic in that function slightly to avoid testing the qmap flag twice. Delete an incorrect comment in ipa_endpoint_init_aggr(). Signed-off-by:
-
Alex Elder authored
The CHANNEL_NOT_RUNNING error condition has been generalized, so rename it to be INCORRECT_CHANNEL_STATE. Signed-off-by:
-
Alex Elder authored
In gsi_channel_update(), a reference count is taken on the last completed transaction "to keep it from completing" before we give the event back to the hardware. Completion processing for that transaction (and any other "new" ones) will not occur until after this function returns, so there's no risk it completing early. So there's no need to take and drop the additional transaction reference. Use local variables in the call to gsi_evt_ring_doorbell(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, misc updates and fallout fixes from recent Florian's code rewritting (from last pull request): 1) Use new flowi4_l3mdev field in ip_route_me_harder(), from Martin Willi. 2) Avoid unnecessary GC with a timestamp in conncount, from William Tu and Yifeng Sun. 3) Remove TCP conntrack debugging, from Florian Westphal. 4) Fix compilation warning in ctnetlink, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: ctnetlink: fix up for "netfilter: conntrack: remove unconfirmed list" netfilter: conntrack: remove pr_debug callsites from tcp tracker netfilter: nf_conncount: reduce unnecessary GC netfilter: Use l3mdev flow key when re-routing mangled packets ==================== Link: https://lore.kernel.org/r/20220519220206.722153-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
I missed this in the barrage of GCC 12 warnings. Commit cf2df74e ("net: fix dev_fill_forward_path with pppoe + bridge") changed the pointer into an array. Fixes: d7e6f583 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Link: https://lore.kernel.org/r/20220520012555.2262461-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Miscellaneous fixes and a new test case Patches 1 and 3 remove helpers that were iterating over the subflow connection list without proper locking. Iteration was not needed in either case. Patch 2 fixes handling of MP_FAIL timeout, checking for orphaned subflows instead of using the MPTCP socket data lock and connection state. Patch 4 adds a test for MP_FAIL timeout using tc pedit to induce checksum failures. ==================== Link: https://lore.kernel.org/r/20220518220446.209750-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Geliang Tang authored
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL reset case. Use the test_linkfail value to make 1024KB test files. Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules to produce the bit flips to trigger the checksum failures on ns2eth2. Add delays on ns2eth1 to make sure more data can translate on ns2eth2. The check_invert flag is enabled in reset_with_fail(), so this test prints out the inverted bytes, instead of the file mismatch errors. Invoke pedit_action_pkts() to get the numbers of the packets edited by the tc pedit actions, and print this numbers to the output. Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Mat Martineau authored
The MPTCP socket's conn_list (list of subflows) requires the socket lock to access. The MP_FAIL timeout code added such an access, where it would check the list of subflows both in timer context and (later) in workqueue context where the socket lock is held. Rather than check the list twice, remove the check in the timeout handler and only depend on the check in the workqueue. Also remove the MPTCP_FAIL_NO_RESPONSE flag, since mptcp_mp_fail_no_response() has insignificant overhead and can be checked on each worker run. Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond") Reported-by:
-
Mat Martineau authored
MP_FAIL timeout (waiting for a peer to respond to an MP_FAIL with another MP_FAIL) is implemented using the MPTCP socket's sk_timer. That timer is also used at MPTCP socket close, so it's important to not have the two timer users interfere with each other. At MPTCP socket close, all subflows are orphaned before sk_timer is manipulated. By checking the SOCK_DEAD flag on the subflows, each subflow can determine if the timer is safe to alter without acquiring any MPTCP-level lock. This replaces code that was using the mptcp_data_lock and MPTCP-level socket state checks that did not correctly protect the timer. Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond") Reviewed-by:
-
Paolo Abeni authored
The mentioned helper requires the msk socket lock, and the current callers don't own it nor can't acquire it, so the access is racy. All the current callers are really checking for infinite mapping fallback, and the latter condition is explicitly tracked by the relevant msk variable: we can safely remove the caller usage - and the caller itself. The issue is present since MP_FAIL implementation, but the fix only applies since the infinite fallback support, ence the somewhat unexpected fixes tag. Fixes: 0530020a ("mptcp: track and update contiguous data status") Acked-and-tested-by:
-
Yuchung Cheng authored
This patch improves TCP PRR loss recovery behavior for a corner case. Previously during PRR conservation-bound mode, it strictly sends the amount equals to the amount newly acked or s/acked. The patch changes s.t. PRR may send additional amount that was banked previously (e.g. application-limited) in the conservation-bound mode, similar to the slow-start mode. This unifies and simplifies the algorithm further and may improve the recovery latency. This change still follow the general packet conservation design principle and always keep inflight/cwnd below the slow start threshold set by the congestion control module. PRR is described in RFC 6937. We'll include this change in the latest revision rfc6937-bis as well. Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jakub Kicinski authored
The current title of our section of the documentation is Linux Networking Documentation. Since we're describing a section of Linux Documentation repeating those two words seems redundant. Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
GCC 12 seems upset that we check ipa_irq against array bound but then proceed, anyway: drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’: drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds] 196 | interrupt->handler[ipa_irq] = handler; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~ drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’ 42 | ipa_irq_handler_t handler[IPA_IRQ_COUNT]; | ^~~~~~~ Reviewed-by: -
Jakub Kicinski authored
GCC 12 warns: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress] 406 | if (!IPC_CB(skb)) { | ^ Indeed the check seems entirely pointless. Hopefully the other validation checks will catch if the cb is bad, but it can't be NULL. Reviewed-by:M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Martin Blumenstingl says: ==================== lantiq_gswip: Two small fixes While updating the Lantiq target in OpenWrt to Linux 5.15 I came across an FDB related error message. While that still needs to be solved I found two other small issues on the way. This series fixes the two minor issues found while revisiting the FDB code in the lantiq_gswip driver: - The first patch fixes the start index used in gswip_port_fdb() to find the entry with the matching bridge. The updated logic is now consistent with the rest of the driver. - The second patch fixes a typo in a dev_err() message. [0] https://lore.kernel.org/netdev/20220517194015.1081632-1-martin.blumenstingl@googlemail.com/ ==================== Link: https://lore.kernel.org/r/20220518220051.1520023-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Martin Blumenstingl authored
gswip_port_fdb_dump() reads the MAC bridge entries. The error message should say "failed to read mac bridge entry". While here, also add the index to the error print so humans can get to the cause of the problem easier. Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
The first N entries in priv->vlans are reserved for managing ports which are not part of a bridge. Use priv->hw_info->max_ports to consistently access per-bridge entries at index 7. Starting at priv->hw_info->cpu_port (6) is harmless in this case because priv->vlan[6].bridge is always NULL so the comparison result is always false (which results in this entry being skipped). Acked-by:
-
Ricardo Martinez authored
t7xx_request_irq() error: uninitialized symbol 'ret'. t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'. If the condition to enter the loop that waits for the handshake event is false on the first iteration then the uninitialized 'event' will be dereferenced, fix this by initializing 'event' to NULL. t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'. No need to check skb at t7xx_port_proxy_recv_skb() since we know it is always called with a valid skb by t7xx_cldma_gpd_rx_from_q(). Reported-by:
Ricardo Martinez <ricardo.martinez@linux.intel.com> Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.comSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== mtk_eth_soc phylink updates This series ultimately updates mtk_eth_soc to use phylink_pcs, with some fixes along the way. Previous attempts to update this driver (which is now marked as legacy) have failed due to lack of testing. I am hoping that this time will be different; Marek can test RGMII modes, but not SGMII. So all that we know is that this patch series probably doesn't break RGMII. 1) remove unused mac_mode and sgmii flags members from structures. 2) remove unnecessary interpretation of speed when configuring 1000 and 2500 Base-X 3) move configuration of SGMII duplex setting from mac_config() to link_up() 4) only pass in interface mode to mtk_sgmii_setup_mode_force() 5) move decision about which mtk_sgmii_setup_mode_*() function to call into mtk_sgmii.c 6) add a fixme comment for RGMII explaning why the call to mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be addressed by someone who has the hardware and can test an appropriate fix. This fixme means that the driver still can't become non-legacy. 7) move gmac setup from mac_config() to mac_finish() - this preserves the order that we write to the hardware when we eventually convert to phylink_pcs() 8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish() for the same reasons as (7). 9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to suit conversion to phylink_pcs 10) finally convert to phylink_pcs As there has been no feedback from mtk_eth_soc maintainers to my RFC on April 6th, not my reminder on April 11th, so it's now time to merge this anyway. Mediatek code seems to be submitted to the kernel and then the maintainers scarper... ==================== Link: https://lore.kernel.org/r/YoUIX+BN/ZbyXzTT@shell.armlinux.org.ukTested-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
Russell King (Oracle) authored
Partially convert mtk_eth_soc to phylink_pcs, moving the configuration, link up and AN restart over. However, it seems mac_pcs_get_state() doesn't actually get the state from the PCS, so we can't convert that over without a better understanding of the hardware. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King (Oracle) authored
Provide a mtk_pcs structure which encapsulates everything that the PCS functions need (the regmap and ana_rgc3 offset), and use this in the PCS functions. Provide shim functions to convert from the existing "mtk_sgmii_*" interface to the converted PCS functions. Signed-off-by:
-
Russell King (Oracle) authored
The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a disabled state. In order to preserve this when we switch to phylink_pcs we need to move the restoration of this register to the mac_finish() callback. Signed-off-by:
-
Russell King (Oracle) authored
Move the setting of the MTK_MAC_MCR register from the end of mac_config into the phylink mac_finish() method, to keep it as the very last write that is done during configuration. Signed-off-by:
-
Russell King (Oracle) authored
Add a fixme comment for the last remaining incorrect usage of state->speed in the mac_config() method, which is strangely in a code path which is only run when the PHY interface mode changes. This means if we are in RGMII mode, changes in state->speed will not cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to be set according to the speed, nor will the TRGPLL clock be set to the correct value. Signed-off-by:
-
Russell King (Oracle) authored
Provide mtk_sgmii_config() to wrap up the decisions about which SGMII configuration will be called. Signed-off-by:
-
Russell King (Oracle) authored
Now that mtk_sgmii_setup_mode_force() only uses the interface mode from the phylink state, pass just the interface mode into this function. Signed-off-by:
-
Russell King authored
Phylink does not guarantee that state->duplex will be set correctly in the mac_config() call, so it's a bug that the driver makes use of it. Move the 802.3z PCS duplex configuration to mac_link_up(). Signed-off-by:
-
Russell King (Oracle) authored
Phylink does not guarantee that state->speed will be set correctly in the mac_config() call, so it's a bug that the driver makes use of it. Moreover, it is making use of it in a function that is only ever called for 1000BASE-X and 2500BASE-X which operate at a fixed speed which happens to be the same setting irrespective of the interface mode. We can simply remove the switch statement and just set the SGMII interface speed. Signed-off-by:
-
