- 15 Jun, 2015 9 commits
-
-
Florent Fourcot authored
[ Upstream commit 21858cd0 ] commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit ed2a80ab ] Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e56 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by:
Julien Meunier <julien.meunier@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7e140696 ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Alexei Starovoitov authored
[ Upstream commit 343f845b ] FROM_BE16: 'ror %reg, 8' doesn't clear upper bits of the register, so use additional 'movzwl' insn to zero extend 16 bits into 64 FROM_LE16: should zero extend lower 16 bits into 64 bit FROM_LE32: should zero extend lower 32 bits into 64 bit Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Andrew Morton authored
[ Upstream commit 073aba98 ] commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ard Biesheuvel authored
Two files that get included when building the multi_v7_defconfig target fail to build when selecting THUMB2_KERNEL for this configuration. In both cases, we can just build the file as ARM code, as none of its symbols are exported to modules, so there are no interworking concerns. In the iwmmxt.S case, add ENDPROC() declarations so the symbols are annotated as functions, resulting in the linker to emit the appropriate mode switches. Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit 13d1b957) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Sasha Levin authored
This reverts commit a821ac4c. That patch is not suitable for 3.18. Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
- 14 Jun, 2015 3 commits
-
-
Sasha Levin authored
Signed-off-by: -
Andrew Morton authored
[ Upstream commit 5ec45a19 ] Fix this compile issue with gcc-4.4.4: arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7d ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Eric Work authored
[ Upstream commit a8115776 ] The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979 restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by:
NeilBrown <neilb@suse.de> Fixes: 47d68979 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501Signed-off-by:
-
- 13 Jun, 2015 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 12 Jun, 2015 1 commit
-
-
Tony Lindgren authored
We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowtoReported-by:
Kevin Hilman <khilman@kernel.org> Tested-by:
Tony Lindgren <tony@atomide.com> (cherry picked from commit d8a50941) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
- 10 Jun, 2015 26 commits
-
-
huaibin Wang authored
[ Upstream commit ac37e251 ] dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee619("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit daaf40e5 ] Fixes: f7d11e93 locking,arch,arc: Fold atomic_ops Cc: <stable@kernel.vger.org> # 3.18 Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 932df430 ] In case of error, the function devm_ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecfe64d8 ("power: reset: Add AT91 reset driver") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 161f873b ] We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
-
Christian König authored
[ Upstream commit 7c0411d2 ] We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit a10f0df0 ] Enabling audio may enable different pll dividers. Don't share plls if the monitors differ in audio support. bug: https://bugzilla.kernel.org/show_bug.cgi?id=98751Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 0f28d128 ] Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530Signed-off-by:
-
Christian König authored
[ Upstream commit 607d4806 ] The mapping range is inclusive between starting and ending addresses. Signed-off-by:
-
Alex Deucher authored
[ Upstream commit fcf3b542 ] Signed-off-by:
-
Liad Kaufman authored
[ Upstream commit 553452e5 ] In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d20201 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit b9a5e5e1 ] Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mark Hounschell authored
[ Upstream commit 74856fbf ] 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
K. Y. Srinivasan authored
[ Upstream commit dc45708c ] Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@vger.kernel.org> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Larry Finger authored
[ Upstream commit 414b7e3b ] The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 6e9eac2d ] If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Cc: stable@vger.kernel.org (v2.6.17+) Signed-off-by:
-
Nadav Haklai authored
[ Upstream commit efa86858 ] Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> #v3.16 Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Jean Delvare authored
[ Upstream commit 5c1ac56b ] In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: stable@vger.kernel.org [v3.10+] Signed-off-by:
-
Scott Mayhew authored
[ Upstream commit 9507271d ] In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit ebe9cb3b ] If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Cc: stable@vger.kernel.org Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mel Gorman authored
[ Upstream commit b0dc2b9b ] NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by:
-
Andi Kleen authored
[ Upstream commit 4933f55f ] libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Helge Deller authored
[ Upstream commit d045c77c ] On architectures where the stack grows upwards (CONFIG_STACK_GROWSUP=y, currently parisc and metag only) stack randomization sometimes leads to crashes when the stack ulimit is set to lower values than STACK_RND_MASK (which is 8 MB by default if not defined in arch-specific headers). The problem is, that when the stack vm_area_struct is set up in fs/exec.c, the additional space needed for the stack randomization (as defined by the value of STACK_RND_MASK) was not taken into account yet and as such, when the stack randomization code added a random offset to the stack start, the stack effectively got smaller than what the user defined via rlimit_max(RLIMIT_STACK) which then sometimes leads to out-of-stack situations and crashes. This patch fixes it by adding the maximum possible amount of memory (based on STACK_RND_MASK) which theoretically could be added by the stack randomization code to the initial stack size. That way, the user-defined stack size is always guaranteed to be at minimum what is defined via rlimit_max(RLIMIT_STACK). This bug is currently not visible on the metag architecture, because on metag STACK_RND_MASK is defined to 0 which effectively disables stack randomization. The changes to fs/exec.c are inside an "#ifdef CONFIG_STACK_GROWSUP" section, so it does not affect other platformws beside those where the stack grows upwards (parisc and metag). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
-
Russell King authored
[ Upstream commit 1b979372 ] Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
-
Philippe Reynes authored
[ Upstream commit a29ef819 ] According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3 ("ARM i.MX27: Add devicetree support") Cc: <stable@vger.kernel.org> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 965278dc ] At boot time we round the memblock limit down to section size in an attempt to ensure that we will have mapped this RAM with section mappings prior to allocating from it. When mapping RAM we iterate over PMD-sized chunks, creating these section mappings. Section mappings are only created when the end of a chunk is aligned to section size. Unfortunately, with classic page tables (where PMD_SIZE is 2 * SECTION_SIZE) this means that if a chunk is between 1M and 2M in size the first 1M will not be mapped despite having been accounted for in the memblock limit. This has been observed to result in page tables being allocated from unmapped memory, causing boot-time hangs. This patch modifies the memblock limit rounding to always round down to PMD_SIZE instead of SECTION_SIZE. For classic MMU this means that we will round the memblock limit down to a 2M boundary, matching the limits on section mappings, and preventing allocations from unmapped memory. For LPAE there should be no change as PMD_SIZE == SECTION_SIZE. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Laura Abbott <labbott@redhat.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 0782e63b ] Ronny reported that the following scenario is not handled correctly: T1 (prio = 10) lock(rtmutex); T2 (prio = 20) lock(rtmutex) boost T1 T1 (prio = 20) sys_set_scheduler(prio = 30) T1 prio = 30 .... sys_set_scheduler(prio = 10) T1 prio = 30 The last step is wrong as T1 should now be back at prio 20. Commit c365c292 ("sched: Consider pi boosting in setscheduler()") only handles the case where a boosted tasks tries to lower its priority. Fix it by taking the new effective priority into account for the decision whether a change of the priority is required. Reported-by:
Ronny Meeus <ronny.meeus@gmail.com> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
