Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it

Pull arm64 fixes from Will Deacon:

 - Fix spurious CPU hotplug warning message from SETEND emulation code

 - Fix the build when GCC wasn't inlining our I/O accessor internals

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/io: add constant-argument check
  arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

Merge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Default silead touchscreen driver to 10 fingers and drop 10 finger
    setting from all DMI quirks. More of a cleanup then a pure fix, but
    since the DMI quirks always get updated through the fixes branch
    this avoids conflicts.

 -  Kconfig fix for randconfig builds

 -  dell-smbios: Fix wrong token data in sysfs

 -  amd-hsmp: Fix driver poking unsupported hw when loaded manually

* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
  platform/x86: dell-smbios: Simplify error handling
  platform/x86: dell-smbios: Fix wrong token data in sysfs
  platform/x86: yt2-1380: add CONFIG_EXTCON dependency
  platform/x86: touchscreen_dmi: Use 2-argument strscpy()
  platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
  Input: silead - Always support 10 fingers

Pull iommu fixes from Joerg Roedel:
 "Core:

   - Make iommu-dma code recognize 'force_aperture' again

   - Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
     return value

  AMD IOMMU fixes:

   - Fix lockdep splat for invalid wait context

   - Add feature bit check before enabling PPR

   - Make workqueue name fit into buffer

   - Fix memory leak in sysfs code"

* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix Invalid wait context issue
  iommu/amd: Check EFR[EPHSup] bit before enabling PPR
  iommu/amd: Fix workqueue name
  iommu: Return right value in iommu_sva_bind_device()
  iommu/dma: Fix domain init
  iommu/amd: Fix sysfs leak in iommu init

Pull ata fix from Niklas Cassel:

 - Fix a regression for the PATA MacIO driver were it would fail to
   probe because of the recent changes of initializing the limits in
   SCSI core

* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K

Pull drm fixes from Dave Airlie:
 "Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
  and amdgpu and a couple of other small fixes.

  Seems quiet enough.

  xe:
   - Update the LMTT when freeing VF GT config

  amdgpu:
   - Fix shutdown issues on some SMU 13.x platforms
   - Silence some UBSAN flexible array warnings

  panel:
   - sitronix-st7789v: handle of_drm_get_panel_orientation failing
     error

  vmwgfx:
   - filter modes greater than available graphics memory
   - fix 3D vs STDU enable
   - remove STDU logic from mode valid
   - logging fix
   - memcmp pointers fix
   - remove unused struct
   - screen target lifetime fix

  komeda:
   - unused struct removal"

* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
  drm/vmwgfx: Don't memcmp equivalent pointers
  drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
  drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
  drm/vmwgfx: Standardize use of kibibytes when logging
  drm/vmwgfx: Remove STDU logic from generic mode_valid function
  drm/vmwgfx: 3D disabled should not effect STDU memory limits
  drm/vmwgfx: Filter modes which exceed graphics memory
  drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
  drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
  drm/xe/pf: Update the LMTT when freeing VF GT config
  drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
  drm/komeda: remove unused struct 'gamma_curve_segment'

On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o

Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Merge tag 'drm-misc-next-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-next-fixes for v6.10-rc3:
- Single unused struct removal that should have been in -fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0251b6ae-bffa-44b2-b698-955712c25a27@linux.intel.com

Merge tag 'drm-misc-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.10-rc3:
- Robustness fixes for vmwgfx.
- Error check for of_drm_get_panel_orientation failing in
  sitronix-st7789v.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d5645d00-a8cf-47d9-a2a0-4ff55842fc7d@linux.intel.com

Merge tag 'amd-drm-fixes-6.10-2024-06-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-06-06:

amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606192348.3620805-1-alexander.deucher@amd.com

Pull SCSI fixes from James Bottomley:
 "The core change is to detect unusually large number of VPD pages
  (caused by device manufacturers having an endiannes issue) and reject
  them rather than trying to parse a huge non-existent array.

  The remaining fixes are in drivers the most user visible of which is
  the ALUA state transition recognition (leads to intermittent I/O
  errors in some situations otherwise)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
  scsi: core: Handle devices which return an unusually large VPD page count
  scsi: mpt3sas: Add missing kerneldoc parameter descriptions
  scsi: qedf: Set qed_slowpath_params to zero before use
  scsi: qedf: Wait for stag work during unload
  scsi: qedf: Don't process stag work during unload and recovery
  scsi: sr: Fix unintentional arithmetic wraparound
  scsi: core: alua: I/O errors for ALUA state transitions
  scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()

Pull pci fix from Bjorn Helgaas:

 - Revert lockdep checking on locking that protects device resets from
   user-space config accesses; it exposed issues for which fixes are in
   the works but are too risky for this cycle (Dan Williams)

* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Revert the cfg_access_lock lockdep mechanism

[BUG]
Since v6.8 there are rare kernel crashes reported by various people,
the common factor is bad page status error messages like this:

  BUG: Bad page state in process kswapd0  pfn:d6e840
  page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c
  pfn:0xd6e840
  aops:btree_aops ino:1
  flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff)
  page_type: 0xffffffff()
  raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0
  raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: non-NULL mapping

[CAUSE]
Commit 09e6cef1 ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") changes the sequence when allocating a new
extent buffer.

Previously we always called grab_extent_buffer() under
mapping->i_private_lock, to ensure the safety on modification on
folio::private (which is a pointer to extent buffer for regular
sectorsize).

This can lead to the following race:

Thread A is trying to allocate an extent buffer at bytenr X, with 4
4K pages, meanwhile thread B is trying to release the page at X + 4K
(the second page of the extent buffer at X).

           Thread A                |                 Thread B
-----------------------------------+-------------------------------------
                                   | btree_release_folio()
				   | | This is for the page at X + 4K,
				   | | Not page X.
				   | |
alloc_extent_buffer()              | |- release_extent_buffer()
|- filemap_add_folio() for the     | |  |- atomic_dec_and_test(eb->refs)
|  page at bytenr X (the first     | |  |
|  page).                          | |  |
|  Which returned -EEXIST.         | |  |
|                                  | |  |
|- filemap_lock_folio()            | |  |
|  Returned the first page locked. | |  |
|                                  | |  |
|- grab_extent_buffer()            | |  |
|  |- atomic_inc_not_zero()        | |  |
|  |  Returned false               | |  |
|  |- folio_detach_private()       | |  |- folio_detach_private() for X
|     |- folio_test_private()      | |     |- folio_test_private()
      |  Returned true             | |     |  Returned true
      |- folio_put()               |       |- folio_put()

Now there are two puts on the same folio at folio X, leading to refcount
underflow of the folio X, and eventually causing the BUG_ON() on the
page->mapping.

The condition is not that easy to hit:

- The release must be triggered for the middle page of an eb
  If the release is on the same first page of an eb, page lock would kick
  in and prevent the race.

- folio_detach_private() has a very small race window
  It's only between folio_test_private() and folio_clear_private().

That's exactly when mapping->i_private_lock is used to prevent such race,
and commit 09e6cef1 ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") screwed that up.

At that time, I thought the page lock would kick in as
filemap_release_folio() also requires the page to be locked, but forgot
the filemap_release_folio() only locks one page, not all pages of an
extent buffer.

[FIX]
Move all the code requiring i_private_lock into
attach_eb_folio_to_filemap(), so that everything is done with proper
lock protection.

Furthermore to prevent future problems, add an extra
lockdep_assert_locked() to ensure we're holding the proper lock.

To reproducer that is able to hit the race (takes a few minutes with
instrumented code inserting delays to alloc_extent_buffer()):

  #!/bin/sh
  drop_caches () {
	  while(true); do
		  echo 3 > /proc/sys/vm/drop_caches
		  echo 1 > /proc/sys/vm/compact_memory
	  done
  }

  run_tar () {
	  while(true); do
		  for x in `seq 1 80` ; do
			  tar cf /dev/zero /mnt > /dev/null &
		  done
		  wait
	  done
  }

  mkfs.btrfs -f -d single -m single /dev/vda
  mount -o noatime /dev/vda /mnt
  # create 200,000 files, 1K each
  ./simoop -n 200000 -E -f 1k /mnt
  drop_caches &
  (run_tar)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-btrfs/CAHk-=wgt362nGfScVOOii8cgKn2LVVHeOvOA7OBwg1OwbuJQcw@mail.gmail.com/Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/lkml/CABXGCsPktcHQOvKTbPaTwegMExije=Gpgci5NW=hqORo-s7diA@mail.gmail.com/Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/linux-btrfs/e8b3311c-9a75-4903-907f-fc0f7a3fe423@gmx.de/
Reported-by: syzbot+f80b066392366b4af85e@syzkaller.appspotmail.com
Fixes: 09e6cef1 ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method")
CC: stable@vger.kernel.org # 6.8+
CC: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from BPF and big collection of fixes for WiFi core and
  drivers.

  Current release - regressions:

   - vxlan: fix regression when dropping packets due to invalid src
     addresses

   - bpf: fix a potential use-after-free in bpf_link_free()

   - xdp: revert support for redirect to any xsk socket bound to the
     same UMEM as it can result in a corruption

   - virtio_net:
      - add missing lock protection when reading return code from
        control_buf
      - fix false-positive lockdep splat in DIM
      - Revert "wifi: wilc1000: convert list management to RCU"

   - wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config

  Previous releases - regressions:

   - rtnetlink: make the "split" NLM_DONE handling generic, restore the
     old behavior for two cases where we started coalescing those
     messages with normal messages, breaking sloppily-coded userspace

   - wifi:
      - cfg80211: validate HE operation element parsing
      - cfg80211: fix 6 GHz scan request building
      - mt76: mt7615: add missing chanctx ops
      - ath11k: move power type check to ASSOC stage, fix connecting to
        6 GHz AP
      - ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
      - rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
      - iwlwifi: mvm: fix a crash on 7265

  Previous releases - always broken:

   - ncsi: prevent multi-threaded channel probing, a spec violation

   - vmxnet3: disable rx data ring on dma allocation failure

   - ethtool: init tsinfo stats if requested, prevent unintentionally
     reporting all-zero stats on devices which don't implement any

   - dst_cache: fix possible races in less common IPv6 features

   - tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED

   - ax25: fix two refcounting bugs

   - eth: ionic: fix kernel panic in XDP_TX action

  Misc:

   - tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"

* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  selftests: net: lib: set 'i' as local
  selftests: net: lib: avoid error removing empty netns name
  selftests: net: lib: support errexit with busywait
  net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
  ipv6: fix possible race in __fib6_drop_pcpu_from()
  af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
  af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
  af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
  af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
  af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
  af_unix: Annotate data-races around sk->sk_sndbuf.
  af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
  af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
  af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
  af_unix: Annotate data-race of sk->sk_state in unix_accept().
  af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
  af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
  af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
  af_unix: Annodate data-races around sk->sk_state for writers.
  af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
  ...

Pull tomoyo fixlet from Tetsuo Handa:
 "Single patch to update project links, no behavior changes"

* tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo:
  tomoyo: update project links

Pull EFI fixes from Ard Biesheuvel:

 - Ensure that .discard sections are really discarded in the EFI zboot
   image build

 - Return proper error numbers from efi-pstore

 - Add __nocfi annotations to EFI runtime wrappers

* tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Add missing __nocfi annotations to runtime wrappers
  efi: pstore: Return proper errors on UEFI failures
  efi/libstub: zboot.lds: Discard .discard sections

Matthieu Baerts says:

====================
selftests: net: lib: small fixes

While looking at using 'lib.sh' for the MPTCP selftests [1], we found
some small issues with 'lib.sh'. Here they are:

- Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is
  supported in some functions, not all. A fix for v6.8+.

- Patch 2: avoid confusing error messages linked to the cleaning part
  when the netns setup fails. A fix for v6.8+.

- Patch 3: set a variable as local to avoid accidentally changing the
  value of a another one with the same name on the caller side. A fix
  for v6.10-rc1+.

Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.org/T/ [1]
====================

Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-0-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without this, the 'i' variable declared before could be overridden by
accident, e.g.

  for i in "${@}"; do
      __ksft_status_merge "${i}"  ## 'i' has been modified
      foo "${i}"                  ## using 'i' with an unexpected value
  done

After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.

Fixes: 596c8819 ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.

The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.

Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.

Fixes: 25ae948b ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.

Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.

Fixes: 25ae948b ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The pata_macio driver advertises a max_segment_size of 0xff00, because
the hardware doesn't cope with requests >= 64K.

However the SCSI core requires max_segment_size to be at least
PAGE_SIZE, which is a problem for pata_macio when the kernel is built
with 64K pages.

In older kernels the SCSI core would just increase the segment size to
be equal to PAGE_SIZE, however since the commit tagged below it causes a
warning and the device fails to probe:

  WARNING: CPU: 0 PID: 26 at block/blk-settings.c:202 .blk_validate_limits+0x2f8/0x35c
  CPU: 0 PID: 26 Comm: kworker/u4:1 Not tainted 6.10.0-rc1 #1
  Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac
  ...
  NIP .blk_validate_limits+0x2f8/0x35c
  LR  .blk_alloc_queue+0xc0/0x2f8
  Call Trace:
    .blk_alloc_queue+0xc0/0x2f8
    .blk_mq_alloc_queue+0x60/0xf8
    .scsi_alloc_sdev+0x208/0x3c0
    .scsi_probe_and_add_lun+0x314/0x52c
    .__scsi_add_device+0x170/0x1a4
    .ata_scsi_scan_host+0x2bc/0x3e4
    .async_port_probe+0x6c/0xa0
    .async_run_entry_fn+0x60/0x1bc
    .process_one_work+0x228/0x510
    .worker_thread+0x360/0x530
    .kthread+0x134/0x13c
    .start_kernel_thread+0x10/0x14
  ...
  scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Although the hardware can't cope with a 64K segment, the driver
already deals with that internally by splitting large requests in
pata_macio_qc_prep(). That is how the driver has managed to function
until now on 64K kernels.

So fix the driver to advertise a max_segment_size of 64K, which avoids
the warning and keeps the SCSI core happy.

Fixes: afd53a3d ("scsi: core: Initialize scsi midlayer limits before allocating the queue")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ce2bf6af-4382-4fe1-b392-cc6829f5ceb2@roeck-us.net/Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218858Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>

Clang static checker (scan-build) warning:
net/ethtool/ioctl.c:line 2233, column 2
Called function pointer is null (null dereference).

Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix
this typo error.

Fixes: 201ed315 ("net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240605034742.921751-1-suhui@nfschina.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot found a race in __fib6_drop_pcpu_from() [1]

If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().

Add a READ_ONCE() to prevent this race.

Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd58 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: netns cleanup_net
 RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984
Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48
RSP: 0018:ffffc900040df070 EFLAGS: 00010206
RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16
RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091
RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8
R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline]
  fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline]
  fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038
  fib6_del_route net/ipv6/ip6_fib.c:1998 [inline]
  fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043
  fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205
  fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127
  fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175
  fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255
  __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271
  rt6_sync_down_dev net/ipv6/route.c:4906 [inline]
  rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911
  addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855
  addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778
  notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
  call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992
  call_netdevice_notifiers_extack net/core/dev.c:2030 [inline]
  call_netdevice_notifiers net/core/dev.c:2044 [inline]
  dev_close_many+0x333/0x6a0 net/core/dev.c:1585
  unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193
  unregister_netdevice_many net/core/dev.c:11276 [inline]
  default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759
  ops_exit_list+0x128/0x180 net/core/net_namespace.c:178
  cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
  process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
  process_scheduled_works kernel/workqueue.c:3312 [inline]
  worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
  kthread+0x2c1/0x3a0 kernel/kthread.c:389
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Fixes: d52d3997 ("ipv6: Create percpu rt6_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20240604193549.981839-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kuniyuki Iwashima says:

====================
af_unix: Fix lockless access of sk->sk_state and others fields.

The patch 1 fixes a bug where SOCK_DGRAM's sk->sk_state is changed
to TCP_CLOSE even if the socket is connect()ed to another socket.

The rest of this series annotates lockless accesses to the following
fields.

  * sk->sk_state
  * sk->sk_sndbuf
  * net->unx.sysctl_max_dgram_qlen
  * sk->sk_receive_queue.qlen
  * sk->sk_shutdown

Note that with this series there is skb_queue_empty() left in
unix_dgram_disconnected() that needs to be changed to lockless
version, and unix_peer(other) access there should be protected
by unix_state_lock().

This will require some refactoring, so another series will follow.

Changes:
  v2:
    * Patch 1: Fix wrong double lock

  v1: https://lore.kernel.org/netdev/20240603143231.62085-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20240604165241.44758-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

While dumping sockets via UNIX_DIAG, we do not hold unix_state_lock().

Let's use READ_ONCE() to read sk->sk_shutdown.

Fixes: e4e541a8 ("sock-diag: Report shutdown for inet and unix sockets (v2)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We can dump the socket queue length via UNIX_DIAG by specifying
UDIAG_SHOW_RQLEN.

If sk->sk_state is TCP_LISTEN, we return the recv queue length,
but here we do not hold recvq lock.

Let's use skb_queue_len_lockless() in sk_diag_show_rqlen().

Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

If the socket type is SOCK_STREAM or SOCK_SEQPACKET, unix_release_sock()
checks the length of the peer socket's recvq under unix_state_lock().

However, unix_stream_read_generic() calls skb_unlink() after releasing
the lock.  Also, for SOCK_SEQPACKET, __skb_try_recv_datagram() unlinks
skb without unix_state_lock().

Thues, unix_state_lock() does not protect qlen.

Let's use skb_queue_empty_lockless() in unix_release_sock().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Once sk->sk_state is changed to TCP_LISTEN, it never changes.

unix_accept() takes advantage of this characteristics; it does not
hold the listener's unix_state_lock() and only acquires recvq lock
to pop one skb.

It means unix_state_lock() does not prevent the queue length from
changing in unix_stream_connect().

Thus, we need to use unix_recvq_full_lockless() to avoid data-race.

Now we remove unix_recvq_full() as no one uses it.

Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in
unix_recvq_full_lockless() because of the following reasons:

  (1) For SOCK_DGRAM, it is a written-once field in unix_create1()

  (2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the
      listener's unix_state_lock() in unix_listen(), and we hold
      the lock in unix_stream_connect()

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net->unx.sysctl_max_dgram_qlen is exposed as a sysctl knob and can be
changed concurrently.

Let's use READ_ONCE() in unix_create1().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sk_setsockopt() changes sk->sk_sndbuf under lock_sock(), but it's
not used in af_unix.c.

Let's use READ_ONCE() to read sk->sk_sndbuf in unix_writable(),
unix_dgram_sendmsg(), and unix_stream_sendmsg().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While dumping AF_UNIX sockets via UNIX_DIAG, sk->sk_state is read
locklessly.

Let's use READ_ONCE() there.

Note that the result could be inconsistent if the socket is dumped
during the state change.  This is common for other SOCK_DIAG and
similar interfaces.

Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report")
Fixes: 2aac7a2c ("unix_diag: Pending connections IDs NLA")
Fixes: 45a96b9b ("unix_diag: Dumping all sockets core")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

unix_stream_read_skb() is called from sk->sk_data_ready() context
where unix_state_lock() is not held.

Let's use READ_ONCE() there.

Fixes: 77462de1 ("af_unix: Add read_sock for stream socket types")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The following functions read sk->sk_state locklessly and proceed only if
the state is TCP_ESTABLISHED.

  * unix_stream_sendmsg
  * unix_stream_read_generic
  * unix_seqpacket_sendmsg
  * unix_seqpacket_recvmsg

Let's use READ_ONCE() there.

Fixes: a05d2ad1 ("af_unix: Only allow recv on connected seqpacket sockets.")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>