- 17 Sep, 2012 6 commits
-
-
Aneesh Kumar K.V authored
This patch simplify hpte_decode for easy switching of virtual address to virtual page number in the later patch Reviewed-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
Don't open code the same Reviewed-by:
-
Aneesh Kumar K.V authored
To clarify the meaning for future readers, replace the open coded 19 with CONTEXT_BITS Reviewed-by:
-
Scott Wood authored
PTRS_PER_PUD should be based on PUD_INDEX_SIZE, not PMD_INDEX_SIZE. We got away with it because PUD and PMD had the same index size, but this is no longer true with Aneesh's patchset to support a 46-bit user effective address space. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Michael Neuling authored
On POWER6 and POWER7 if the input operand to an instruction is a denormalised single precision binary floating point value we can take a denormalisation exception where it's expected that the hypervisor (HV=1) will fix up the inputs before the instruction is run. This adds code to handle this denormalisation exception for POWER6 and POWER7. It also add a CONFIG_PPC_DENORMALISATION option and sets it in pseries/ppc64_defconfig. This is useful on bare metal systems only. Based on patch from Milton Miller. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Merge Gavin patches from the PCI tree as subsequent powerpc patches are going to depend on them Signed-off-by:
-
- 13 Sep, 2012 1 commit
-
-
Bjorn Helgaas authored
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
-
- 11 Sep, 2012 5 commits
-
-
Gavin Shan authored
The patch implements ppc_md.pcibios_window_alignment for powernv platform so that the resource reassignment in PCI core will be done according to the I/O and memory alignment returned from powernv platform. The alignments returned from powernv platform is closely depending on the scheme for PE segmenting. Besides, the patch isn't useful for now, but the subsequent patches will be working based on it. [bhelgaas: use pci_pcie_type() since pci_dev.pcie_type was removed] Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Gavin Shan authored
This patch implements pcibios_window_alignment() so powerpc platforms can force P2P bridge windows to be at larger alignments than the PCI spec requires. [bhelgaas: changelog] Signed-off-by:
-
Gavin Shan authored
The original idea comes from Ram Pai. This patch puts the chunk of code for calculating the minimal alignment of memory window into a separate inline function. Signed-off-by:
-
Gavin Shan authored
This patch changes pbus_size_io() and pbus_size_mem() to do window (I/O, memory and prefetchable memory) reassignment based on the minimal alignments for the P2P bridge, which was retrieved by window_alignment(). [bhelgaas: changelog] Signed-off-by:
-
Gavin Shan authored
This patch implements a weak function to return the default I/O or memory window alignment for a P2P bridge. By default, I/O windows are aligned to 4KiB or 1KiB and memory windows are aligned to 4MiB. Some platforms, e.g., powernv, have special alignment requirements and can override pcibios_window_alignment(). [bhelgaas: changelog] Signed-off-by:
-
- 10 Sep, 2012 2 commits
-
-
Joe MacDonald authored
sys_subpage_prot() takes an unsigned long for 'addr' then does some stuff with it and the result is stored in a signed int, i, which is eventually used as the size parameter in a copy_from_user call. Update 'i' to be an unsigned long as well and since 'nw' is used in a size_t context which, depending on whether this is 32- or 64-bit may be unsigned int or unsigned long, switch that to a size_t and always be right. Finally, since we're in the neighbourhood, make the same changes to subpage_prot_clear(). Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Joe MacDonald <joe.macdonald@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
-
Alexey Kardashevskiy authored
The upcoming VFIO support requires a way to know which entry in the TCE map is not empty in order to do cleanup at QEMU exit/crash. This patch adds such functionality to POWERNV platform code. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 09 Sep, 2012 26 commits
-
-
Michael Neuling authored
These are no longer used so get rid of them Signed-off-by:
-
Michael Neuling authored
Currently we mark the DABRX to interrupt on all matches (hypervisor/kernel/user and then filter in software. We can be a lot smarter now that we can set the DABRX dynamically. This sets the DABRX based on the flags passed by the user. Signed-off-by:
-
Michael Neuling authored
Rework set_dabr to take a DABRX value as well. Both the pseries and PS3 hypervisors do some checks on the DABRX values that are passed in the hcall. This patch stops bogus values from being passed to hypervisor. Also, in the case where we are clearing the breakpoint, where DABR and DABRX are zero, we modify the DABRX value to make it valid so that the hcall won't fail. Signed-off-by:
-
Gavin Shan authored
The patch does cleanup on EEH PCI address cache based on the fact EEH core is the only user of the component. * Cleanup on function names so that they all have prefix "eeh" and looks more short. * Function printk() has been replaced with pr_debug() or pr_warning() accordingly. Signed-off-by: -
Gavin Shan authored
The idea comes from Benjamin Herrenschmidt. The eeh cache helps fetching the pci device according to the given I/O address. Since the eeh cache is serving for eeh, it's reasonable for eeh cache to trace eeh device except pci device. The patch make eeh cache to trace eeh device. Also, the major eeh entry function eeh_dn_check_failure has been renamed to eeh_dev_check_failure since it will take eeh device as input parameter. Signed-off-by:
-
Gavin Shan authored
While EEH module is installed, PCI devices is checked one by one to see if it supports eeh. On different platforms, the PCI devices are referred through different ways when the EEH module is loaded. For example, on pSeries platform, that is done by OF node. However, we would do that by real PCI devices (struct pci_dev) on PowerNV platform in future. So we needs some mechanism to differentiate those cases by classifying them to probe modes, either from OF nodes or real PCI devices. The patch implements the support to eeh probe mode. Also, the EEH on pSeries has set it into EEH_PROBE_MODE_DEVTREE. That means the probe will be done based on OF nodes on pSeries platform. In addition, On pSeries platform, it's done by OF nodes. The patch moves the the probe function from EEH core to platform dependent backend and some cleanup applied. Signed-off-by:
-
Gavin Shan authored
The patch removes the eeh related statistics for eeh device since they have been maintained by the corresponding eeh PE. Also, the flags used to trace the state of eeh device and PE have been reworked for a little bit. Signed-off-by:
-
Gavin Shan authored
The patch reworks the current implementation so that the eeh errors will be handled basing on PE instead of eeh device. Signed-off-by:
-
Gavin Shan authored
Once eeh error is found, eeh event will be created and put it into the global linked list. At the mean while, kernel thread will be started to process it. The handler for the kernel thread originally was eeh device sensitive. The patch reworks the handler of the kernel thread so that it's PE sensitive. Signed-off-by:
-
Gavin Shan authored
The patch implements reset based on PE instead of eeh device. Also, The functions used to retrieve the reset type, either hot or fundamental reset, have been reworked for a little bit. More specificly, it's implemented based the the eeh device traverse function. Signed-off-by:
-
Gavin Shan authored
The patch refactors the original implementation in order to enable I/O and retrieve EEH log based on PE. Signed-off-by:
-
Gavin Shan authored
The patch introduces the function to traverse the devices of the specified PE and its child PEs. Also, the restore on device bars is implemented based on the traverse function. Signed-off-by:
-
Gavin Shan authored
Originally, all the EEH operations were implemented based on OF node. Actually, it explicitly breaks the rules that the operation target is PE instead of device. Therefore, the patch makes all the operations based on PE instead of device. Unfortunately, the backend for config space has to be kept as original because it doesn't depend on PE. Signed-off-by:
-
Gavin Shan authored
There're 2 conditions to trigger EEH error detection: invalid value returned from reading I/O or config space. On each case, the function eeh_dn_check_failure will be called to initialize EEH event and put it into the poll for further processing. The patch changes the function for a little bit so that the EEH error will be traced based on PE instead of EEH device any more. Also, the function eeh_find_device_pe() has been removed since the eeh device is tracing the PE by struct eeh_dev::pe. Signed-off-by:
-
Gavin Shan authored
Since we've introduced dedicated struct to trace individual PEs, it's reasonable to trace its state through the dedicated struct instead of using "eeh_dev" any more. The patches implements the state tracing based on PE. It's notable that the PE state will be applied to the specified PE as well as its child PEs. That complies with the rule that problematic parent PE will prevent those child PEs from working properly. Signed-off-by:
-
Gavin Shan authored
The original implementation builds EEH event based on EEH device. We already had dedicated struct to depict PE. It's reasonable to build EEH event based on PE. Signed-off-by:
-
Gavin Shan authored
During PCI hotplug and EEH recovery, the PE hierarchy tree might be changed due to the PCI topology changes. At later point when the PCI device is added, the PE will be created dynamically again. The patch introduces new function to remove EEH devices from the associated PE. That also can cause that the parent PE is removed from the PE tree if the parent PE doesn't include valid EEH devices and child PEs. Signed-off-by:
-
Gavin Shan authored
The patch creates PEs and associated the newly created PEs with it parent/silbing as well as EEH devices. It would become more straight to trace EEH errors and recover them accordingly. Once the EEH functionality on one PCI IOA has been enabled, we tries to create PE against it. If there's existing PE, to which the current PCI IOA should be attached, the existing PE will be converted from "device" type to "bus" type accordingly. Signed-off-by:
-
Gavin Shan authored
The patch implements searching PE based on the following requirements: * Search PE according to PE address, which is traditional PE address that is composed of PCI bus/device/function number, or unified PE address assigned by firmware or platform. * Search parent PE according to the given EEH device. It's useful when creating new PE and put it into right position. Signed-off-by:
-
Gavin Shan authored
For one particular PE, it's only meaningful in the ancestor PHB domain. Therefore, each PHB should have its own PE hierarchy tree to trace those PEs created against the PHB. The patch creates PEs for the PHBs and put those PEs into the global link list traced by "eeh_phb_pe". The link list of PEs would be first level of overall PE hierarchy tree across the system. Signed-off-by:
-
Gavin Shan authored
The patch introduces global mutex for EEH so that the core data structures can be protected by that. Also, 2 inline functions are exported for that: eeh_lock() and eeh_unlock(). Signed-off-by:
-
Gavin Shan authored
As defined in PAPR 2.4, Partitionable Endpoint (PE) is an I/O subtree that can be treated as a unit for the purposes of partitioning and error recovery. Therefore, eeh core should be aware of PE. With eeh_pe struct, we can support PE explicitly. Further more, it makes all the stuff much more data centralized. Another important reason is for eeh core to support multiple platforms. Some of them like pSeries figures out PEs through OF nodes while others like powernv have to do that through PCI bus/device tree. With explicit PE support, eeh core will be implemented based on the centrialized data and platform dependent implementations figure it out by their feasible ways. When the struct is designed, following factors are taken in account: * Reflecting the relationships of PEs. PE might have parent as well children. * Reflecting the association of PE and (eeh) devices. * PEs have PHB boundary. * PE should have unique address assigned in the corresponding PHB domain. Signed-off-by: -
Gavin Shan authored
The patch adds more logs to EEH initialization functions for debugging purpose. Also, the machine type (pSeries) is checked in the platform initialization to assure it's the correct platform to invoke it. Signed-off-by:
-
Gavin Shan authored
The EEH initialization functions have been postponed until slab/slub are ready. So we use slab/slub to allocate the memory chunks for newly creatd EEH devices. That would save lots of memory. The patch also does cleanup to replace "kmalloc" with "kzalloc" so that we needn't clear the allocated memory chunk explicitly. Signed-off-by:
-
Gavin Shan authored
Currently, we have 3 phases for EEH initialization on pSeries platform. All of them are done through builtin functions: platform initialization, EEH device creation, and EEH subsystem enablement. All of them are done no later than ppc_md.setup_arch. That means that the slab/slub isn't ready yet, so we have to allocate memory chunks on basis of PAGE_SIZE for those dynamically created EEH devices. That's pretty expensive. In order to utilize slab/slub for memory allocation, we have to move the EEH initialization functions around, but all of them should be called after slab is ready. Signed-off-by:
-
Michael Ellerman authored
It's possible for the cpu_possible_mask to change between the time we initialise the pacas and the time we setup per_cpu areas. Obviously impossible cpus shouldn't ever be running, but stranger things have happened. So be paranoid and initialise data_offset with a poison value in case we don't set it up later. Based on a patch from Anton Blanchard. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
