- 01 Nov, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix tcp_bpf_recvmsg() to return -EAGAIN instead of 0 in non-blocking case when no data is available yet, from John. 2) Fix a compilation error in libbpf_attach_type_by_name() when compiled with clang 3.8, from Andrey. 3) Fix a partial copy of map pointer on scalar alu and remove id generation for RET_PTR_TO_MAP_VALUE return types, from Daniel. 4) Add unlimited memlock limit for kernel selftest's flow_dissector_load program, from Yonghong. 5) Fix ping for some BPF shell based kselftests where distro does not ship "ping -6" anymore, from Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Oct, 2018 29 commits
-
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== The series contains two fixes in BPF core and test cases. For details please see individual patches. Thanks! ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Right now unprivileged tests are never executed as a BPF test run, only loaded. Allow for running them as well so that we can check the outcome and probe for regressions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Add some more map related test cases to test_verifier kselftest to improve test coverage. Summary: 1012 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
In the verifier there is no such semantics where registers with PTR_TO_MAP_VALUE type have an id assigned to them. This is only used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the test against NULL has been pattern matched and type transformed into PTR_TO_MAP_VALUE. Fixes: 3e6a4b3e ("bpf/verifier: introduce BPF_PTR_TO_MAP_VALUE") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Roman Gushchin <guro@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Arnaldo Carvalho de Melo reported build error in libbpf when clang version 3.8.1-24 (tags/RELEASE_381/final) is used: libbpf.c:2201:36: error: comparison of constant -22 with expression of type 'const enum bpf_attach_type' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (section_names[i].attach_type == -EINVAL) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~ 1 error generated. Fix the error by keeping "is_attachable" property of a program in a separate struct field instead of trying to use attach_type itself. Fixes: 956b620f ("libbpf: Introduce libbpf_attach_type_by_name") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Andrey Ignatov <rdna@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Li Zhijian authored
ping binary on some distros doesn't support "ping -6" anymore. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Enable minimum shaper on MC TCs Petr says: An MC-aware mode was introduced in commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. In this patchset, MC TCs (8..15) are configured with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. First in patch #1, the QEEC register is extended with fields necessary to configure the minimum shaper. In patch #2, minimum shaper is enabled on TCs 8..15. In patches #3 and #4, first the MC-awareness test is tweaked to support the minimum shaper, and then a new test is introduced to test that MC traffic behaves well under UC overload. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In a previous patch, mlxsw was updated to configure a minimum bandwidth allowance on MC TCs. Test that this indeed fixes the problem of UC traffic overload pushing out all MC traffic. Fixes: b5638d46 ("selftests: mlxsw: Add a test for UC behavior under MC flood") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Since the minimum shaper is now being enabled for MC TCs, it's unreasonable to expect no UC traffic loss. Minimal min shaper value is 200Mbps, which is 20% of the 1Gbps that this test configures on egress. To cover for glitches, tolerate up to 25% UC degradation under MC overload. Fixes: b5638d46 ("selftests: mlxsw: Add a test for UC behavior under MC flood") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
An MC-aware mode was introduced in commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. Therefore configure the MC TCs (8..15) with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. Fixes: 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable configuration of minimum shaper. Increase the QEEC length to 0x20 as well: that's the length that the register has had for a long time now, but with the configurations that mlxsw typically exercises, the firmware tolerated 0x1C-sized packets. With mise=true however, FW rejects packets unless they have the full required length. Fixes: b9b7cee4 ("mlxsw: reg: Add QoS ETS Element Configuration register") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== Bugfix for the HNS3 driver This patch series include bugfix for the HNS3 ethernet controller driver. Change log: V4->V5: Fixes comments from Joe Perches & Sergei Shtylyov V3->V4: Fixes comments from Sergei Shtylyov V2->V3: Fixes comments from Sergei Shtylyov V1->V2: Fixes the compilation break reported by kbuild test robot http://patchwork.ozlabs.org/patch/989818/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Since hclgevf_reset_wait() is used to wait for the hardware to complete the reset, it is not necessary to hold the rtnl_lock during hclgevf_reset_wait(). So this patch releases the lock for the duration of hclgevf_reset_wait(). Fixes: 6988eb2a ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
Since hclge_reset_wait() is used to wait for the hardware to complete the reset, it is not necessary to hold the rtnl_lock during hclge_reset_wait(). So this patch releases the lock for the duration of hclge_reset_wait(). Fixes: 6d4fab39 ("net: hns3: Reset net device with rtnl_lock") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
In a multi-core machine, the mailbox service and reset service will be executed at the same time. The reset service will re-initialize the command queue, before that, the mailbox handler can only get some invalid messages. The HCLGE_STATE_CMD_DISABLE flag means that the command queue is not available and needs to be reinitialized. Therefore, when the mailbox handler recognizes this flag, it should not process the command. Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
There are some functions that, when they fail to send the command, need to return the corresponding error value to its caller. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 681ec399 ("net: hns3: fix for vlan table lost problem when resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When there is a PHY, the driver needs to complete some operations through MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from being sent during the hardware reset. Fixes: b50ae26c ("net: hns3: never send command queue message to IMP when reset) Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
The HEAD pointer of the hardware command queue maybe equal to the command queue's next_to_use in the driver, so that does not belong to the invalid HEAD pointer, since the hardware may not process the command in time, causing the HEAD pointer to be too late to update. The variables' name in this function is unreadable, so give them a more readable one. Fixes: 3ff50490 ("net: hns3: fix a dead loop in hclge_cmd_csq_clean") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
It is not necessary to reset the queue in the hns3_uninit_all_ring(), since the queue is stopped in the down operation, and will be reset in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING flag in the hclge_reset_tqp() is not correct, because we need to reset tqp during pf reset, otherwise it may cause queue not being reset to working state problem. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
The spin lock of the command queue only need to be initialized once when the driver initializes the command queue. It is not necessary to initialize the spin lock when resetting. At the same time, the modification of the queue member should be performed after acquiring the lock. Fixes: 3efb960f ("net: hns3: Refactor the initialization of command queue") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
The current driver supports handling two vector0 interrupts, reset and mailbox. When the hardware reports an interrupt of another type of interrupt source, if the driver does not process the interrupt, but enables the interrupt, the hardware will repeatedly report the unknown interrupt. Therefore, the driver enables the vector0 interrupt after clearing the known type of interrupt source. Other conditions are not enabled. Fixes: cd8c5c26 ("net: hns3: Fix for hclge_reset running repeatly problem") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When hns3_get_ring_config()/hns3_queue_to_ring()/ hns3_get_vector_ring_chain() failed during resetting, the allocated memory has not been freed before these three functions return. So this patch adds error handler in these functions to fix it. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When hns3_nic_init_vector_data() fails to map ring to vector, it should cancel the netif_napi_add() that has been successfully done and then exits. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit 88078d98 "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away, so RXFCS changes were ignored. Then before commit d55bef50 ("net: fix pskb_trim_rcsum_slow() with odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling each other. Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5. Note that this patch also rewrites mlx5e_get_fcs() to : - Use skb_header_pointer() instead of reinventing it. - Use __get_unaligned_cpu32() to avoid possible non aligned accesses as Dmitris pointed out. Fixes: 902a5459 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") Reported-by: Paweł Staszewski <pstaszewski@itcare.pl> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Dimitris Michailidis <dmichail@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Paweł Staszewski <pstaszewski@itcare.pl> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Tested-By: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bo YU authored
Fix a warning from checkpatch.pl:'please no space before tabs' in include/net/af_unix.h Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bo YU authored
Fix a warning from checkpatch: function definition argument 'struct sock *' should also have an identifier name in include/net/af_unix.h. Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Oct, 2018 10 commits
-
-
John Fastabend authored
We return 0 in the case of a nonblocking socket that has no data available. However, this is incorrect and may confuse applications. After this patch we do the correct thing and return the error EAGAIN. Quoting return codes from recvmsg manpage, EAGAIN or EWOULDBLOCK The socket is marked nonblocking and the receive operation would block, or a receive timeout had been set and the timeout expired before data was received. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Yonghong Song authored
On our test machine, bpf selftest test_flow_dissector.sh failed with the following error: # ./test_flow_dissector.sh bpffs not mounted. Mounting... libbpf: failed to create map (name: 'jmp_table'): Operation not permitted libbpf: failed to load object 'bpf_flow.o' ./flow_dissector_load: bpf_prog_load bpf_flow.o selftests: test_flow_dissector [FAILED] Let us increase the rlimit to remove the above map creation failure. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Marc Zyngier authored
The mvpp2 driver has the curious behaviour of passing a stack variable to irq_set_affinity_hint(), which results in the kernel exploding the first time anyone accesses this information. News flash: userspace does, and irqbalance will happily take the machine down. Great stuff. An easy fix is to track the mask within the queue_vector structure, and to make sure it has the same lifetime as the interrupt itself. Fixes: e531f767 ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Abdul Haleem reported a build error on ppc : drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: `struct iphdr` declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function get_fixed_ipv4_csum: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type __u8 ipproto = iph->protocol; ^ Fixes: 55469bc6 ("drivers: net: remove <net/busy_poll.h> inclusion when not needed") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt, it doesn't correctly process the case when policy is set with SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a slab-out-of-bounds in sctp_getsockopt_pr_streamstatus(). This patch fixes it by return -EINVAL for this case. Fixes: 0ac1077e ("sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL") Reported-by: syzbot+5da0d0a72a9e7d791748@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
If a transport is removed by asconf but there still are some chunks with this transport queuing on out_chunk_list, later an use-after-free issue will be caused when accessing this transport from these chunks in sctp_outq_flush(). This is an old bug, we fix it by clearing the transport of these chunks in out_chunk_list when removing a transport in sctp_assoc_rm_peer(). Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Couple of fixes First patch makes sure mlxsw does not ignore user requests to delete FDB entries that were learned by the device. Second patch fixes a use-after-free that can be triggered by requesting a reload via devlink when the previous reload failed. Please consider both patches for stable. They apply cleanly to both 4.18.y and 4.19.y. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shalom Toledo authored
After a failed reload, the driver is still registered to devlink, its devlink instance is still allocated and the 'reload_fail' flag is set. Then, in the next reload try, the driver's allocated devlink instance will be freed without unregistering from devlink and its components (e.g, resources). This scenario can cause a use-after-free if the user tries to execute command via devlink user-space tool. Fix by not freeing the devlink instance during reload (failed or not). Fixes: 24cc68ad ("mlxsw: core: Add support for reload") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Demands to remove FDB entries should be honored even if the FDB entry in question was originally learned, and not added by the user. Therefore ignore the added_by_user datum for SWITCHDEV_FDB_DEL_TO_DEVICE. Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by: Petr Machata <petrm@mellanox.com> Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-