- 22 Apr, 2019 17 commits
-
-
Pan Bian authored
The memory allocated in the function iio_dummy_evgen_create is not released if it fails to add the evgen device to device hierarchy. This may result in a memory leak bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Mohan Kumar authored
iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable It fixes the following checkpatch.pl warning: WARNING: Prefer using '"%s...", __func__' to using function's name, in a string Signed-off-by:
Mohan Kumar <mohankumar718@gmail.com> Signed-off-by:
-
Fabrice Gasnier authored
This fixes build errors seen when CONFIG_STM32_DFSDM_ADC is set, as stm32-dfsdm-adc driver now also relies on triggered buffer API: Fixes: 11646e81 ("iio: adc: stm32-dfsdm: add support for buffer modes") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Fabrice Gasnier authored
This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC is selected: WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] || COMPILE_TEST [=n]) Fixes: e2e6771c ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: -
Fabrice Gasnier authored
This fixes a build issue when CONFIG_IIO_STM32_TIMER_TRIGGER isn't set but used in stm32-dfsdm-adc driver (e.g. CONFIG_STM32_DFSDM_ADC is set): ERROR: "is_stm32_timer_trigger" [drivers/iio/adc/stm32-dfsdm-adc.ko] undefined! There are two possible options to fix this issue: - select IIO_STM32_TIMER_TRIGGER along with CONFIG_STM32_DFSDM_ADC. This is what's being done currently for CONFIG_STM32_ADC. - stub "is_stm32_timer_trigger" function Choice is made to stub this function as suggested in [1]. This is also inspired by similar "is_stm32_lptim_trigger" function (see [2]) in include/linux/iio/timer/stm32-lptim-trigger.h [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1977377.html [2] https://lkml.org/lkml/2017/9/10/124 Fixes: 11646e81 ("iio: adc: stm32-dfsdm: add support for buffer modes") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fix-suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Andrey Smirnov authored
Use devm_iio_device_register() and drop imx7d_adc_remove(). Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Andrey Smirnov authored
Since imx7d_adc_remove() does exactly the same thing as imx7d_adc_suspend() we can use the latter together with devm_add_action_or_reset() to simplify the former. Rename imx7d_adc_suspend() to imx7d_adc_disable() for clarity while at it. Signed-off-by:
-
Andrey Smirnov authored
Initialization sequence performed in imx7d_adc_resume() is exactly the same as the one being done in imx7d_adc_probe(). Make use of the former in the latter to avoid code duplication. Rename imx7d_adc_resume() to imx7d_adc_enable() for clarity while at it. Signed-off-by:
-
Mohan Kumar authored
As per Documentation/timers/timers-howto.txt Msleep < 20ms can sleep for up to 20ms. so use usleep_range. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mircea Caprioru authored
This patch will ensure compatibility with the new revision of the AD5758 dac converter. The modifications consist of removing the fault_prot_switch function since this option is no longer available, and enabling the ENABLE_PPC_BUFFERS bit in ADC_CONFIG register before setting the PPC current mode. The previous version of the chip was never released to customers so there is no need to support it going forwards. Signed-off-by:
Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by:
-
Lorenzo Bianconi authored
As it has been already done for other st sensors in 'commit 9049531c ("iio: accel: st_accel: inline per-sensor data")', get rid of some defines and just open code the values into the appropriate struct elements since the semantic meaning is inherent in the name of the C99-addressable fields and there is no reason to duplicate the code Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Gregory CLEMENT authored
This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI. Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Gregory CLEMENT authored
This adds device tree bindings for the TI ADS8344 A/DC chips. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rui Miguel Silva authored
Add me as maintainer of the nxp fxas21002c gyroscope driver. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
-
Rui Miguel Silva authored
Add driver to talk over spi to a fxas21002c gyroscope device and use the core as main controller. Signed-off-by:
-
Rui Miguel Silva authored
Add the real driver to talk over i2c and use the fxas21002c core for the main tasks. Signed-off-by:
-
Rui Miguel Silva authored
Add core support for the NXP fxas21002c Tri-axis gyroscope, using the iio subsystem. It supports PM operations, axis reading, temperature, scale factor of the axis, high pass and low pass filtering, and sampling frequency selection. It will have extras modules to support the communication over i2c and spi. Signed-off-by:
-
- 14 Apr, 2019 23 commits
-
-
Rui Miguel Silva authored
Add device tree bindings for the FXAS21002C gyroscope. Signed-off-by:
-
Andreas Klinger authored
reword configuration option for SRF04 list supported types in help text Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Signed-off-by:
-
Andreas Klinger authored
add compatibles for Maxbotix ultrasonic iio sensor types to yaml documentation Signed-off-by:
-
Andreas Klinger authored
add Maxbotix LV ultrasonic sensor types mb1000, mb1010, mb1020, mb1030 and mb1040 add a configuration struct with the different trigger pulse lengths Signed-off-by:
-
YueHaibing authored
When building with CONFIG_GPIOLIB is not set gcc warns this: drivers/iio/adc/ti-ads7950.c:75:19: error: field chip has incomplete type struct gpio_chip chip; ^~~~ drivers/iio/adc/ti-ads7950.c: In function ti_ads7950_set: drivers/iio/adc/ti-ads7950.c:409:32: error: implicit declaration of function gpiochip_get_data; did you mean acpi_get_data? [-Werror=implicit-function-declaration] struct ti_ads7950_state *st = gpiochip_get_data(chip); ^~~~~~~~~~~~~~~~~ acpi_get_data Reported-by:Hulk Robot <hulkci@huawei.com> Fixes: c97dce79 ("iio: adc: ti-ads7950: add GPIO support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
-
Colin Ian King authored
Currently if mask is neither CHAN_INFO_RAW or CHAN_INFO_SCALE then then an uninitialized error return 'ret' is returned. Fix this by adding a default case that ensures -EINVAL is returned for this specific case. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c: In function 'st_lsm6dsx_read_tagged_fifo': drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:520:41: warning: variable 'gyro_sensor' set but not used [-Wunused-but-set-variable] drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:520:28: warning: variable 'acc_sensor' set but not used [-Wunused-but-set-variable] They are not used since commit 14c7c6e1 ("iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine") Signed-off-by:
-
Robert Jones authored
Add support to STMicroelectronics LIS2DE12 accelerometer in st_accel framework. http://www.st.com/resource/en/datasheet/lis2de12.pdfSigned-off-by:
Robert Jones <rjones@gateworks.com> Signed-off-by:
-
Robert Jones authored
Signed-off-by:
-
Valentin Manea authored
Add the ACPI ID for KXCJ9 sensor seen on the a Teclast X80 Power tablet. Signed-off-by:
Valentin Manea <linux-iio@mrs.ro> Signed-off-by:
-
Marcelo Schmitt authored
Previously external clock were set through platform_data struct. Now device uses clk struct defined in include/linux/clk.h to handle external clock source. It also removes mclk from platform_data struct. Signed-off-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by:
-
Marcelo Schmitt authored
Organize includes to list them in lexicographic order. Signed-off-by:
-
Andreas Klinger authored
use bmp085.txt and change it into yaml format fix links to datasheets in replaced documentation Signed-off-by:
-
Andreas Klinger authored
replace avia-hx711.txt by avia-hx711.yaml as yaml devicetree documentation for avia hx711 iio adc sensor Signed-off-by:
-
Andrey Smirnov authored
Use devm_platform_ioremap_resource() to be able to drop a bit of explicit boilerplate code. Signed-off-by:
-
Andrey Smirnov authored
Replace combination of pr_err()/dev_name() with an equivalent call for dev_err(). Signed-off-by:
-
Andrey Smirnov authored
Use a local "struct device *dev" in imx7d_adc_probe() for brevity. No functional change intended. Signed-off-by:
-
Beniamin Bia authored
Document support for AD7616 Analog to Digital Converter. Signed-off-by:
Beniamin Bia <beniamin.bia@analog.com> Reviewed-by:
-
Beniamin Bia authored
The AD7616 is a 12-bit ADC with 16 channels. The AD7616 can be configured to work in hardware mode by controlling it via gpio pins and read data via spi. No support for software mode yet, but it is a work in progress. This device requires a reset in order to update oversampling, so chip info has got a new attribute to mark this. The current assumption that this driver makes for AD7616, is that it's working in Hardware Mode with Serial, Burst and Sequencer modes activated. To activate them, following pins must be pulled high: -SER/PAR -SEQEN And following must be pulled low: -WR/BURST -DB4/SEQEN Datasheets: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7616.pdfSigned-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Stefan Popa authored
Available oversampling ratios and scales can be shown by calling a common ad7606_show_avail function which takes as parameters the array which stores the values, together with the size of the array. Oversampling options are now defined in chip info structure and they are loaded at probe. Has_Oversampling attribute was removed because oversampling_num was added and it is not needed anymore. The purpose of this patch is to deal with the scale_avail and oversampling_avail arrays in a generic way. This makes it easier to add support for new devices which will work with different scales and oversampling ratios. It is also an intermediate step for adding support for ad7616 which has different oversampling sampling ratios available. Signed-off-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
-
Melissa Wen authored
Remove unneeded parentheses around the arguments of ||. This reduces clutter and code behave in the same way. Change suggested by checkpatch.pl. CHECK: Unnecessary parentheses around 'st->devid == ID_AD9833' CHECK: Unnecessary parentheses around 'st->devid == ID_AD9837' Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
-
Fabrizio Castro authored
Between "config" and "MAX9611" there is a tab, replace it with a space. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
-
