1. 12 Feb, 2009 7 commits
    • Jeff Mahoney's avatar
      Btrfs: remove btrfs_init_path · e00f7308
      Jeff Mahoney authored
      btrfs_init_path was initially used when the path objects were on the
      stack.  Now all the work is done by btrfs_alloc_path and btrfs_init_path
      isn't required.
      
      This patch removes it, and just uses kmem_cache_zalloc to zero out the object.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      e00f7308
    • Jeff Mahoney's avatar
      Btrfs: balance_level checks !child after access · 7951f3ce
      Jeff Mahoney authored
      The BUG_ON() is in the wrong spot.
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      7951f3ce
    • Yan Zheng's avatar
      Btrfs: Avoid using __GFP_HIGHMEM with slab allocator · b335b003
      Yan Zheng authored
      btrfs_releasepage may call kmem_cache_alloc indirectly,
      and provide same GFP flags it gets to kmem_cache_alloc.
      So it's possible to use __GFP_HIGHMEM with the slab
      allocator.
      Signed-off-by: default avatarYan Zheng <zheng.yan@oracle.com>
      b335b003
    • Chris Mason's avatar
      Btrfs: don't clean old snapshots on sync(1) · e1df36d2
      Chris Mason authored
      Cleaning old snapshots can make sync(1) somewhat slow, and some users
      and applications still use it in a global fsync kind of workload.
      
      This patch changes btrfs not to clean old snapshots during sync, which is
      safe from a FS consistency point of view.  The major downside is that it
      makes it difficult to tell when old snapshots have been reaped and
      the space they were using has been reclaimed.  A new ioctl will be added
      for this purpose instead.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      e1df36d2
    • Chris Mason's avatar
      Btrfs: use larger metadata clusters in ssd mode · 536ac8ae
      Chris Mason authored
      Larger metadata clusters can significantly improve writeback performance
      on ssd drives with large erasure blocks.  The larger clusters make it
      more likely a given IO will completely overwrite the ssd block, so it
      doesn't have to do an internal rwm cycle.
      
      On spinning media, lager metadata clusters end up spreading out the
      metadata more over time, which makes fsck slower, so we don't want this
      to be the default.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      536ac8ae
    • Chris Mason's avatar
      Btrfs: process mount options on mount -o remount, · b288052e
      Chris Mason authored
      Btrfs wasn't parsing any new mount options during remount, making it
      difficult to set mount options on a root drive.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b288052e
    • Josef Bacik's avatar
      Btrfs: make sure all pending extent operations are complete · eb099670
      Josef Bacik authored
      Theres a slight problem with finish_current_insert, if we set all to 1 and then
      go through and don't actually skip any of the extents on the pending list, we
      could exit right after we've added new extents.
      
      This is a problem because by inserting the new extents we could have gotten new
      COW's to happen and such, so we may have some pending updates to do or even
      more inserts to do after that.
      
      So this patch will only exit if we have never skipped any of the extents in the
      pending list, and we have no extents to insert, this will make sure that all of
      the pending work is truly done before we return.  I've been running with this
      patch for a few days with all of my other testing and have not seen issues.
      Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@redhat.com>
      eb099670
  2. 09 Feb, 2009 1 commit
    • Chris Mason's avatar
      Btrfs: don't use spin_is_contended · 284b066a
      Chris Mason authored
      Btrfs was using spin_is_contended to see if it should drop locks before
      doing extent allocations during btrfs_search_slot.  The idea was to avoid
      expensive searches in the tree unless the lock was actually contended.
      
      But, spin_is_contended is specific to the ticket spinlocks on x86, so this
      is causing compile errors everywhere else.
      
      In practice, the contention could easily appear some time after we started
      doing the extent allocation, and it makes more sense to always drop the lock
      instead.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      284b066a
  3. 06 Feb, 2009 1 commit
  4. 05 Feb, 2009 1 commit
  5. 04 Feb, 2009 17 commits
    • Chris Mason's avatar
      Btrfs: don't return congestion in write_cache_pages as often · 9b0d3ace
      Chris Mason authored
      On fast devices that go from congested to uncongested very quickly, pdflush
      is waiting too often in congestion_wait, and the FS is backing off to
      easily in write_cache_pages.
      
      For now, fix this on the btrfs side by only checking congestion after
      some bios have already gone down.  Longer term a real fix is needed
      for pdflush, but that is a larger project.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      9b0d3ace
    • Chris Mason's avatar
      Btrfs: Only prep for btree deletion balances when nodes are mostly empty · 7b78c170
      Chris Mason authored
      Whenever an item deletion is done, we need to balance all the nodes
      in the tree to make sure we don't end up with an empty node if a pointer
      is deleted.  This balance prep happens from the root of the tree down
      so we can drop our locks as we go.
      
      reada_for_balance was triggering read-ahead on neighboring nodes even
      when no balancing was required.  This adds an extra check to avoid
      calling balance_level() and avoid reada_for_balance() when a balance
      won't be required.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      7b78c170
    • Chris Mason's avatar
      Btrfs: fix btrfs_unlock_up_safe to walk the entire path · 12f4dacc
      Chris Mason authored
      btrfs_unlock_up_safe would break out at the first NULL node entry or
      unlocked node it found in the path.
      
      Some of the callers have missing nodes at the lower levels of the path, so this
      commit fixes things to check all the nodes in the path before returning.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      12f4dacc
    • Chris Mason's avatar
      Btrfs: change btrfs_del_leaf to drop locks earlier · 4d081c41
      Chris Mason authored
      btrfs_del_leaf does two things.  First it removes the pointer in the
      parent, and then it frees the block that has the leaf.  It has the
      parent node locked for both operations.
      
      But, it only needs the parent locked while it is deleting the pointer.
      After that it can safely free the block without the parent locked.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      4d081c41
    • Chris Mason's avatar
      Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode · 06d9a8d7
      Chris Mason authored
      btrfs_truncate_inode_items is setup to stop doing btree searches when
      it has finished removing the items for the inode.  It used to detect the
      end of the inode by looking for an objectid that didn't match the
      one we were searching for.
      
      But, this would result in an extra search through the btree, which
      adds extra balancing and cow costs to the operation.
      
      This commit adds a check to see if we found the inode item, which means
      we can stop searching early.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      06d9a8d7
    • Chris Mason's avatar
      Btrfs: Don't try to compress pages past i_size · f03d9301
      Chris Mason authored
      The compression code had some checks to make sure we were only
      compressing bytes inside of i_size, but it wasn't catching every
      case.  To make things worse, some incorrect math about the number
      of bytes remaining would make it try to compress more pages than the
      file really had.
      
      The fix used here is to fall back to the non-compression code in this
      case, which does all the proper cleanup of delalloc and other accounting.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      f03d9301
    • Josef Bacik's avatar
      Btrfs: join the transaction in __btrfs_setxattr · 81144949
      Josef Bacik authored
      With selinux on we end up calling __btrfs_setxattr when we create an inode,
      which calls btrfs_start_transaction().  The problem is we've already called
      that in btrfs_new_inode, and in btrfs_start_transaction we end up doing a
      wait_current_trans().  If btrfs-transaction has started committing it will wait
      for all handles to finish, while the other process is waiting for the
      transaction to commit.  This is fixed by using btrfs_join_transaction, which
      won't wait for the transaction to commit.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@redhat.com>
      
      81144949
    • Chris Ball's avatar
      Btrfs: Handle SGID bit when creating inodes · 8c087b51
      Chris Ball authored
      Before this patch, new files/dirs would ignore the SGID bit on their
      parent directory and always be owned by the creating user's uid/gid.
      Signed-off-by: default avatarChris Ball <cjb@laptop.org>
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      
      8c087b51
    • Chris Mason's avatar
      Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks · bd56b302
      Chris Mason authored
      Every transaction in btrfs creates a new snapshot, and then schedules the
      snapshot from the last transaction for deletion.  Snapshot deletion
      works by walking down the btree and dropping the reference counts
      on each btree block during the walk.
      
      If if a given leaf or node has a reference count greater than one,
      the reference count is decremented and the subtree pointed to by that
      node is ignored.
      
      If the reference count is one, walking continues down into that node
      or leaf, and the references of everything it points to are decremented.
      
      The old code would try to work in small pieces, walking down the tree
      until it found the lowest leaf or node to free and then returning.  This
      was very friendly to the rest of the FS because it didn't have a huge
      impact on other operations.
      
      But it wouldn't always keep up with the rate that new commits added new
      snapshots for deletion, and it wasn't very optimal for the extent
      allocation tree because it wasn't finding leaves that were close together
      on disk and processing them at the same time.
      
      This changes things to walk down to a level 1 node and then process it
      in bulk.  All the leaf pointers are sorted and the leaves are dropped
      in order based on their extent number.
      
      The extent allocation tree and commit code are now fast enough for
      this kind of bulk processing to work without slowing the rest of the FS
      down.  Overall it does less IO and is better able to keep up with
      snapshot deletions under high load.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      bd56b302
    • Chris Mason's avatar
      Btrfs: Change btree locking to use explicit blocking points · b4ce94de
      Chris Mason authored
      Most of the btrfs metadata operations can be protected by a spinlock,
      but some operations still need to schedule.
      
      So far, btrfs has been using a mutex along with a trylock loop,
      most of the time it is able to avoid going for the full mutex, so
      the trylock loop is a big performance gain.
      
      This commit is step one for getting rid of the blocking locks entirely.
      btrfs_tree_lock takes a spinlock, and the code explicitly switches
      to a blocking lock when it starts an operation that can schedule.
      
      We'll be able get rid of the blocking locks in smaller pieces over time.
      Tracing allows us to find the most common cause of blocking, so we
      can start with the hot spots first.
      
      The basic idea is:
      
      btrfs_tree_lock() returns with the spin lock held
      
      btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
      the extent buffer flags, and then drops the spin lock.  The buffer is
      still considered locked by all of the btrfs code.
      
      If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
      the spin lock and waits on a wait queue for the blocking bit to go away.
      
      Much of the code that needs to set the blocking bit finishes without actually
      blocking a good percentage of the time.  So, an adaptive spin is still
      used against the blocking bit to avoid very high context switch rates.
      
      btrfs_clear_lock_blocking() clears the blocking bit and returns
      with the spinlock held again.
      
      btrfs_tree_unlock() can be called on either blocking or spinning locks,
      it does the right thing based on the blocking bit.
      
      ctree.c has a helper function to set/clear all the locked buffers in a
      path as blocking.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b4ce94de
    • Chris Mason's avatar
      Btrfs: hash_lock is no longer needed · c487685d
      Chris Mason authored
      Before metadata is written to disk, it is updated to reflect that writeout
      has begun.  Once this update is done, the block must be cow'd before it
      can be modified again.
      
      This update was originally synchronized by using a per-fs spinlock.  Today
      the buffers for the metadata blocks are locked before writeout begins,
      and everyone that tests the flag has the buffer locked as well.
      
      So, the per-fs spinlock (called hash_lock for no good reason) is no
      longer required.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      c487685d
    • Chris Mason's avatar
      Btrfs: disable leak debugging checks in extent_io.c · 3935127c
      Chris Mason authored
      extent_io.c has debugging code to report and free leaked extent_state
      and extent_buffer objects at rmmod time.  This helps track down
      leaks and it saves you from rebooting just to properly remove the
      kmem_cache object.
      
      But, the code runs under a fairly expensive spinlock and the checks to
      see if it is currently enabled are not entirely consistent.  Some use
      #ifdef and some #if.
      
      This changes everything to #if and disables the leak checking.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      3935127c
    • Chris Mason's avatar
      Btrfs: sort references by byte number during btrfs_inc_ref · b7a9f29f
      Chris Mason authored
      When a block goes through cow, we update the reference counts of
      everything that block points to.  The internal pointers of the block
      can be in just about any order, and it is likely to have clusters of
      things that are close together and clusters of things that are not.
      
      To help reduce the seeks that come with updating all of these reference
      counts, sort them by byte number before actual updates are done.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b7a9f29f
    • Chris Mason's avatar
      Btrfs: async threads should try harder to find work · b51912c9
      Chris Mason authored
      Tracing shows the delay between when an async thread goes to sleep
      and when more work is added is often very short.  This commit adds
      a little bit of delay and extra checking to the code right before
      we schedule out.
      
      It allows more work to be added to the worker
      without requiring notifications from other procs.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b51912c9
    • Jim Owens's avatar
      Btrfs: selinux support · 0279b4cd
      Jim Owens authored
      Add call to LSM security initialization and save
      resulting security xattr for new inodes.
      
      Add xattr support to symlink inode ops.
      
      Set inode->i_op for existing special files.
      Signed-off-by: default avatarjim owens <jowens@hp.com>
      0279b4cd
    • Christian Hesse's avatar
      Btrfs: make btrfs acls selectable · bef62ef3
      Christian Hesse authored
      This patch adds a menu entry to kconfig to enable acls for btrfs.
      This allows you to enable FS_POSIX_ACL at kernel compile time.
      
      (updated by Jeff Mahoney to make the changes in fs/btrfs/Kconfig instead)
      Signed-off-by: default avatarChristian Hesse <mail@earthworm.de>
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      bef62ef3
    • Chris Mason's avatar
      Btrfs: Catch missed bios in the async bio submission thread · a6837051
      Chris Mason authored
      The async bio submission thread was missing some bios that were
      added after it had decided there was no work left to do.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      a6837051
  6. 28 Jan, 2009 1 commit
    • Chris Mason's avatar
      Btrfs: fix readdir on 32 bit machines · 89f135d8
      Chris Mason authored
      After btrfs_readdir has gone through all the directory items, it
      sets the directory f_pos to the largest possible int.  This way
      applications that mix readdir with creating new files don't
      end up in an endless loop finding the new directory items as they go.
      
      It was a workaround for a bug in git, but the assumption was that if git
      could make this looping mistake than it would be a common problem.
      
      The largest possible int chosen was INT_LIMIT(typeof(file->f_pos),
      and it is possible for that to be a larger number than 32 bit glibc
      expects to come out of readdir.
      
      This patches switches that to INT_LIMIT(off_t), which should keep
      applications happy on 32 and 64 bit machines.
      Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      89f135d8
  7. 29 Jan, 2009 1 commit
  8. 28 Jan, 2009 11 commits