- 01 Jul, 2017 20 commits
-
-
Manivannan Sadhasivam authored
Add device tree bindings for Measurement-Specialties HTU21 temperature & humidity sensor and humidity part of MS8607 sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Manivannan Sadhasivam authored
Add of_match_table for Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Fabrice Gasnier authored
Clock name has been updated during driver/DT binding review: https://lkml.org/lkml/2016/12/13/718 Update DT binding doc to reflect this. Fixes: bf2d8581 (iio: Add bindings for STM32 timer trigger driver) Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Eugen Hristev authored
Added support for suspend/resume functionality for the ADC IP in sama5d2 SoC. In order to enter Suspend to ram mode (backup + self refresh mode for memory), in which the ADC IP is no longer powered, we need to reset the pins to default state, for the scenario when they are also used for I2C bus to communicate with the PMIC. On resume, we need to reconfigure the ADC IP registers and reconfigure the trigger registers in the case when the suspend procedure is done while sysfs has the buffer and trigger enabled. In the case the suspend happens exactly during a software triggered conversion, the request will time out, because we reset and power down the ADC. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
In order to add proper device tree support give a more general name to of_device_id table Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Move st_sensors_of_i2c_probe() in st_sensors_core and rename it in st_sensors_of_name_probe(). That change is necessary to add device-tree support in spi code otherwise the rest of the autodetection will fail since spi->modalias (and indio_dev->name) will be set using compatible string value that differs from standard sensor name Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Enable multiread by default for LIS3MDL since using I2C interface the subaddr Msb is used to automatically increase the slave address during multiple data read/write. In the same way, using SPI interface, bit 1 in register address is used to enable auto-increment of the slave address in multiple read/write. Fixes: 872e79ad (iio:magn: Add STMicroelectronics magn driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Akinobu Mita authored
The integration time is controlled by the ATIME register only. However, this register is written by i2c_smbus_write_word_data() in write_raw(). We actually don't need to write a subsequent register. So just use i2c_smbus_write_byte_data() instead. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Stefan Brüns authored
While the INA226 has a conversion ready flag (CVRF) in the R/W Mask/Enable register with read-to-clear semantics, the corresponding bit of the INA219 (CNVR) is part of the bus voltage register. The flag is cleared by reading the power register. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Manivannan Sadhasivam authored
Add device tree bindings for Measurement Specialties TSYS01 temperature sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Manivannan Sadhasivam authored
Add of_match_table for Measurement Specialties TSYS01 temperature sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Eugen Hristev authored
Added support for the external hardware trigger on pin ADTRG, integrated the three possible edges into the driver and created buffer management for data retrieval Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Eugen Hristev authored
Add property for the edge type of the hardware trigger pin ADTRG Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Fabio Estevam authored
To keep IMX7D_ADC text consistent with other iio/adc entries, add the vendor name to the driver menu text. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Michael Stecklein authored
Add of_match_table and point it to a list of compatible device tree device id's. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Michael Stecklein authored
Include datasheet links, add i2c_device_id entries, and update kconfig help for compatible HDC10xx devices: HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Michael Stecklein authored
Add the bindings for the family of HDC100x sensors. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add proper support for L3GD20H gyroscope sensor. In particular: - use L3GD20H as device name instead of L3GD20 - fix available full scales - fix available sample frequencies Note that the original patch listed first below introduced broken support for this part. The second patch drops the support as it didn't work. This new patch brings in working support. Fixes: 9444a300 (IIO: Add support for L3GD20H gyroscope) Fixes: a0657716 ("iio:gyro: bug on L3GD20H gyroscope support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Hans de Goede authored
Add support for the BOSC0200 ACPI device id used on some x86 tablets. note driver_data is not set to a specific model, driver_data is not used anyways (instead detection is done on the chip_id reg) and the 2 tablets with a BOSC0200 ACPI device id I've have 2 different chips, one has a BMA250E, the other a BMA222E. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 29 Jun, 2017 20 commits
-
-
Denis Petrovic authored
This patch fixes the following checkpatch.pl warning: WARNING: Prefer kmalloc_array over kmalloc with multiply Signed-off-by: Denis Petrovic <denis.petrovic@edu.ece.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quytelda Kahja authored
This patch replaces several instances where a pointer is compared to NULL (i.e., `ptr == NULL`) with `!ptr`, which is preferred. Signed-off-by: Quytelda Kahja <quytelda@tamalin.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
dprc.h is only used in the mc bus driver so move it together with the sources thus making it private. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
mc-cmd.h contains some low level functions used to encode and decode commands to the MC. They are used by the drivers so move them to the public headers and get rid of the mc-cmd.h header. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
mc-sys.h contains the API to send commands to the MC and is used by drivers. Move it to the public headers and get rid of the mc-sys.h header. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
Few files using byte order macros but did not explicitly included the required kernel header, so add it. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
dpmng.h & dpmng.c files expose an API of just one function which is only used by the bus driver. Move that single API in the bus source as static and remove the two files. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
All the mc-bus.h contents is only used privately in the bus driver so move everything to the private header and get rid of the mc-bus.h header file. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
Define dev_is_fsl_mc() and the bus type definition (fsl_mc_bus_type) are used externally so move them to the public header. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
fsl_mc_msi_create_irq_domain() will is used from the irqchip glue code so it needs to be in the public headers. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
They are never used outside the source they are implemented in and very likely never will, so it's safe to make them static. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
The function fsl_mc_bus_exists() has a prototype but is never implemented so delete it from the header file. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
These functions already have their prototypes in fsl-mc-private.h header file so delete them from mc-bus.h. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
In its current form, the public headers of the mc-bus depend only on a structure "dprc_obj_desc" defined in dprc.h. Move it to the bus public header together with its associated defines and, in order to keep the naming prefixes consistent rename it to "fsl_mc_obj_desc". This will allow making dprc.h private in future patches. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
These couple of header files are not needed in the source so remove them. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
Stick to one way of checking the return code of strcmp(): use '!'. This was suggested in a review comment. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurentiu Tudor authored
Move comparison before the strcmp() in this if statement, and slightly increase efficiency by not making the strcmp() each time the if gets evaluated but only when the comparison is true. This was suggested in a review comment. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
The helper function ser_to_dev does not need to be in global scope, so make it static. Cleans up sparse warning: "warning: symbol 'ser_to_dev' was not declared. Should it be static?" Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Okash Khawaja <okash.khawaja@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_info message and split line to clean up an checkpatch line too wide warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-