- 30 Aug, 2016 8 commits
-
-
David Howells authored
We should #include linux/random.h to use get_random(). Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Remove one #ifndef'd-out variable and a couple of excessive blank lines. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Add a trace event for debuging rxrpc_call struct usage. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Condense the terminal states of a call state machine to a single state, plus a separate completion type value. The value is then set, along with error and abort code values, only when the call is transitioned to the completion state. Helpers are provided to simplify this. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
The call pointer in a channel on a connection will be NULL if there's no active call on that channel. rxrpc_abort_calls() needs to check for this before trying to take the call's state_lock. Signed-off-by:
David Howells <dhowells@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2016-08-29 This series contains updates to fm10k only. Jake provides all the changes in this series starting with fixes an issue where VF devices may fail during an unbind/bind and we will never zero the reference counter for the pci_dev structure. Updated the hot path to use SW counters instead of checking for hardware Tx pending for possible transmit hangs, which will improve performance. Fixed the NAPI budget accounting so that fm10k_poll will return actual work done, capped at (budget - 1) instead of returning 0. Added a check to ensure that the device is in the normal IO state before continuing to probe, which allows us to give a more descriptive message of what is wrong in the case of uncorrectable AER error. In preparation for adding Geneve Rx offload support, refactored the current VXLAN offload flow to be a bit more generic. Added support for receive offloads on one Geneve tunnel. Ensure that other bits in the RXQCTL register do not get cleared, to make sure that bits related to queue ownership are maintained. Fixed an issue in queue ownership assignment which casued a race condition between the PF and the VF such that potentially a VF could cause FUM fault errors due to normal PF/VF driver behavior. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
All three conflicts were cases of simple overlapping changes. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Add missing sysfs attribute group terminator to it87 driver" * tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (it87) Add missing sysfs attribute group terminator
-
- 29 Aug, 2016 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix bugs that could cause kernel deadlocks or file system corruption while moving xattrs to expand the extended inode. Also add some sanity checks to the block group descriptors to make sure we don't end up overwriting the superblock" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid deadlock when expanding inode size ext4: properly align shifted xattrs when expanding inodes ext4: fix xattr shifting when expanding inodes part 2 ext4: fix xattr shifting when expanding inodes ext4: validate that metadata blocks do not overlap superblock ext4: reserve xattr index for the Hurd
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Segregate namespaces properly in conntrack dumps, from Liping Zhang. 2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet. 3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz. 4) Fix use-after-free in tcp_xmit_retransmit_queue(). 5) Userspace header fixups (use of __u32, missing includes, etc.) from Mikko Rapeli. 6) Further refinements to fragmentation wrt gso and tunnels, from Shmulik Ladkani. 7) Trigger poll correctly for zero length UDP packets, from Eric Dumazet. 8) TCP window scaling fix, also from Eric Dumazet. 9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets. 10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet. 11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng. 12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet. 13) Add new device ID to alx driver, from Owen Lin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) Add Killer E2500 device ID in alx driver. net: smc91x: fix SMC accesses Documentation: networking: dsa: Remove platform device TODO net/mlx5: Increase number of ethtool steering priorities net/mlx5: Add error prints when validate ETS failed net/mlx5e: Fix memory leak if refreshing TIRs fails net/mlx5e: Add ethtool counter for TX xmit_more net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ net/mlx5e: Don't wait for SQ completions on close net/mlx5e: Don't post fragmented MPWQE when RQ is disabled net/mlx5e: Don't wait for RQ completions on close net/mlx5e: Limit UMR length to the device's limitation rhashtable: fix a memory leak in alloc_bucket_locks() sfc: fix potential stack corruption from running past stat bitmask team: loadbalance: push lacpdus to exact delivery net: hns: dereference ppe_cb->ppe_common_cb if it is non-null 8139cp: Fix one possible deadloop in cp_rx_poll i40e: Change some init flow for the client Revert "phy: IRQ cannot be shared" net: dsa: bcm_sf2: Fix race condition while unmasking interrupts ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Remove module related code from two drivers that are only configurable as built-in: intel_pmic_gpio and platform/olpc" * tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmic_gpio: Make explicitly non-modular platform/olpc: Make ec explicitly non-modular
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "This was meant to be sent early last week, but I has a change pending on one of the fixes and other things made me forget all about. Ugh. We have some misc fixes for powerpc 4.8. Some trivial bits and some regressions, and a trivial cleanup or two that I saw no point in letting rot in patchwork" * tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: signals: Discard transaction state from signal frames powerpc/powernv : Drop reference added by kset_find_obj() powerpc/tm: do not use r13 for tabort_syscall powerpc: move hmi.c to arch/powerpc/kvm/ powerpc: sysdev: cpm: fix gpio save_regs functions powerpc/pseries: PACA save area fix for MCE vs MCE powerpc/pseries: PACA save area fix for general exception vs MCE powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support powerpc, hotplug: Avoid to touch non-existent cpumasks. powerpc: migrate exception table users off module.h and onto extable.h powerpc/powernv/pci: fix iterator signedness powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb) cxl: use pcibios_free_controller_deferred() when removing vPHBs powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner" powerpc/512x: Delete unnecessary assignment for the field "owner" drivers/macintosh: Delete owner assignment powerpc: cputhreads: Add missing include file
-
Jean Delvare authored
Attribute array it87_attributes_in lacks its NULL terminator, causing random behavior when operating on the attribute group. Fixes: 52929715 ("hwmon: (it87) Use is_visible for voltage sensors") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Jacob Keller authored
When the PF assigns a new MAC address to a VF it uses the base address registers to store the MAC address. This allows a VF which loads after this setup the ability to get the initial address without having to wait for a mailbox message. Unfortunately to do this, the PF must take queue ownership away from the VF, which can cause fault errors when there is already an active VF driver. This queue ownership assignment causes race condition between the PF and the VF such that potentially a VF can cause FUM fault errors due to normal PF/VF driver behavior. It is not safe to simply allow the PF to write the base address registers without taking queue ownership back as the PF must also disable the queues, and this would impact active VF use. The current code is safe because the queue ownership will prevent the VF from actually writing but does trigger the FUM fault. We can do better by simply avoiding the register write process when a mailbox message suffices. If the message can be sent over the mailbox, then we will not perform the queue ownership assignment and we won't update the base address to be the same as the MAC address. We do still have to write the TXQCTL registers in order to update the VID of the queue. This is necessary because the TXQCTL register is read-only from the VF, and thus the VF cannot do this for itself. This register does not need to wait for the Tx queue to be disabled and is safe for the PF to write during normal VF operation, so we move this write to the top of the function above the mailbox message. Without this, the TXQCTL register would be misconfigured and cause the VF to Tx hang. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Ensure that other bits in the RXQCTL register do not get cleared. This ensures that bits related to queue ownership are maintained. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Similar to how we handle VXLAN offload, enable support for a single Geneve tunnel. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
In preparation for adding Geneve Rx offload support, refactor the current VXLAN offload flow to be a bit more generic so that it will be easier to add the new Geneve code. The fm10k hardware supports one VXLAN and one Geneve tunnel, so we will eventually treat the VXLAN and Geneve tunnels identically. To this end, factor out the code that handles the current list so that we can use the generic flow for both tunnels in the next patch. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
In the event of a surprise remove, we expect the driver to go down, which includes calling .stop_hw(). However, this function will return an error because the queues won't appear to cleanly disable. Prevent this and avoid the unnecessary checks by just returning when FM10K_REMOVED(hw->hw_addr) is true. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
In the event of an uncorrectable AER error occurring when the driver has not loaded, the recovery routines are not done. This is done because future loads of the driver may not be aware of the IO state and may not be able to recover at all. In this case, when we next load the driver it fails due to what appears to be a surprise remove event. Instead, add a check to ensure that the device is in the normal IO state before continuing to probe. This allows us to give a more descriptive message of what is wrong. Without this change, the driver will attempt to probe up to our first call of .reset_hw() which will be unable to read registers and act as if a surprise remove event occurred. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When fm10k_poll fully cleans rings it returns 0. This is incorrect as it messes up the budget accounting in the core NAPI code. Fix this by returning actual work done, capped at budget - 1 since the core doesn't expect a return of the full budget when the driver modifies the NAPI status. Cc: Paolo Abeni <pabeni@redhat.com> Cc: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
While technically not needed, as all our uses of ACCESS_ONCE are scalar types, we already use READ_ONCE in a few places, and for code readability we can swap all the uses of the older ACCESS_ONCE into READ_ONCE. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
The function is only used in fm10k_ethtool.c, so make it static. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
A previous patch added support to check for hardware Tx pending in the fm10k_down routine. This support was intended to ensure that we accurately check what the hardware state is. However, checking for Tx hangs in this manor during the hotpath results in a large performance hit. Avoid this by making the hotpath check use the SW counters instead. Fixes: a0f53cf49cb0 ("fm10k: use actual hardware registers when checking for pending Tx", 2016-06-08) Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
A previous patch removed the pci_disable_device() call in .io_error_detected. This call corresponded to a pci_enable_device_mem() call within .io_slot_reset handler. Change the call here to a pci_reenable_device() so that it does not increment and leak the enable_cnt reference count for the device. Without this change, VF devices may fail during an unbind/bind, and we'll never zero the reference counter for the pci_dev structure. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Paul Gortmaker authored
The Kconfig entry controlling compilation of this code is: drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: Alek Du <alek.du@intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com>
-
Paul Gortmaker authored
The Kconfig entry controlling compilation of this code is: arch/x86/Kconfig:config OLPC arch/x86/Kconfig: bool "One Laptop Per Child support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: platform-driver-x86@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
Darren Hart <dvhart@linux.intel.com>
-
Arnd Bergmann authored
The addition of VLAN support caused a possible use of uninitialized data if we encounter a zero TCA_FLOWER_KEY_ETH_TYPE key, as pointed out by "gcc -Wmaybe-uninitialized": net/sched/cls_flower.c: In function 'fl_change': net/sched/cls_flower.c:366:22: error: 'ethertype' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the code to only set the ethertype field if it was nonzero, as before the patch. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 9399ae9a ("net_sched: flower: Add vlan support") Cc: Hadar Hen Zion <hadarh@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The newly added reset logic uses helper functions for the MMIO that may fail. However, when the read operation fails, we end up writing back uninitialized data to the register, as gcc warns: drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c: In function 'xgene_enet_link_state': drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:213:2: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:209:6: note: 'data' was declared here u32 data; We already print a warning to the console log if that happens, the best alternative that I can see is skip the rest of the reset sequence if the register value cannot be read: Most likely the write would fail as well, and if it succeeded, worse things could happen. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 3eb7cb9d ("drivers: net: xgene: XFI PCS reset when link is down") Cc: Fushen Chen <fchen@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vidya Sagar Ravipati authored
This patch enhances ethtool link mode bitmap to include missing interface modes for 1G/10G speeds Changes: 1000baseX is the mode introduced to cover all 1G Fiber cases. All modes under 1000BaseX i.e. 1000BASE-SX, 1000BASE-LX, 1000BASE-LX10 and 1000BASE-BX10 are not explicitly defined at this moment. 10G CR,SR,LR and ER link modes are included for 10G speed.. Issue: ethtool on 1G/10G SFP port reports Base-T as this port supports 1000baseX,10G CR, SR and LR modes. root@tor-02$ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Current message level: 0x00000000 (0) Link detected: yes After fix: root@tor-02$ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Current message level: 0x00000000 (0) Link detected: yes Signed-off-by:
Vidya Sagar Ravipati <vidya@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
James Morse authored
After resume from hibernate on arm64, any amd-xgbe devices that were running when we hibernated are reported as down, even when it is not. Re-plugging the cables does not cause the interface to come back, the link must be marked as down then up via 'ip set link' using the serial console. This happens because the device has been power-cycled and possibly re-initialised by firmware, whereas the driver's memory structures have been restored from the hibernate image and the two do not agree. Schedule a restart of the device after powerup in case the world changed while we were asleep. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Owen Lin authored
Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When TCP operates in lossy environments (between 1 and 10 % packet losses), many SACK blocks can be exchanged, and I noticed we could drop them on busy senders, if these SACK blocks have to be queued into the socket backlog. While the main cause is the poor performance of RACK/SACK processing, we can try to avoid these drops of valuable information that can lead to spurious timeouts and retransmits. Cause of the drops is the skb->truesize overestimation caused by : - drivers allocating ~2048 (or more) bytes as a fragment to hold an Ethernet frame. - various pskb_may_pull() calls bringing the headers into skb->head might have pulled all the frame content, but skb->truesize could not be lowered, as the stack has no idea of each fragment truesize. The backlog drops are also more visible on bidirectional flows, since their sk_rmem_alloc can be quite big. Let's add some room for the backlog, as only the socket owner can selectively take action to lower memory needs, like collapsing receive queues or partial ofo pruning. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Since commit 83c0afae ("net: dsa: Add new binding implementation"), the shortcomings of the dsa platform device have been addressed, remove that TODO item. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-