- 05 Dec, 2022 40 commits
-
-
David Sterba authored
The defines/enums are used only for tracepoints and are not part of the on-disk format. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
Reviewed-by:
-
David Sterba authored
Reviewed-by:
-
David Sterba authored
Reviewed-by:
-
David Sterba authored
Define helper macro that can be used in enum {} to utilize the automatic increment to define all bits without directly defining the values or using additional linear bits. 1. capture the sequence value, N 2. use the value to define the given enum with N-th bit set 3. reset the sequence back to N Use for enums that do not require fixed values for symbolic names (like for on-disk structures): enum { ENUM_BIT(FIRST), ENUM_BIT(SECOND), ENUM_BIT(THIRD) }; Where the values would be 0x1, 0x2 and 0x4. Reviewed-by: -
Qu Wenruo authored
[BACKGROUND] In theory init_btrfs_fs() and exit_btrfs_fs() should match their sequence, thus normally they should look like this: init_btrfs_fs() | exit_btrfs_fs() ----------------------+------------------------ init_A(); | init_B(); | init_C(); | | exit_C(); | exit_B(); | exit_A(); So is for the error path of init_btrfs_fs(). But it's not the case, some exit functions don't match their init functions sequence in init_btrfs_fs(). Furthermore in init_btrfs_fs(), we need to have a new error label for each new init function we added. This is not really expandable, especially recently we may add several new functions to init_btrfs_fs(). [ENHANCEMENT] The patch will introduce the following things to enhance the situation: - struct init_sequence Just a wrapper of init and exit function pointers. The init function must use int type as return value, thus some init functions need to be updated to return 0. The exit function can be NULL, as there are some init sequence just outputting a message. - struct mod_init_seq[] array This is a const array, recording all the initialization we need to do in init_btrfs_fs(), and the order follows the old init_btrfs_fs(). - bool mod_init_result[] array This is a bool array, recording if we have initialized one entry in mod_init_seq[]. The reason to split mod_init_seq[] and mod_init_result[] is to avoid section mismatch in reference. All init function are in .init.text, but if mod_init_seq[] records the @initialized member it can no longer be const, thus will be put into .data section, and cause modpost warning. For init_btrfs_fs() we just call all init functions in their order in mod_init_seq[] array, and after each call, setting corresponding mod_init_result[] to true. For exit_btrfs_fs() and error handling path of init_btrfs_fs(), we just iterate mod_init_seq[] in reverse order, and skip all uninitialized entry. With this patch, init_btrfs_fs()/exit_btrfs_fs() will be much easier to expand and will always follow the strict order. Signed-off-by:Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Filipe Manana authored
All callers of btrfs_tree_mod_log_insert_key() are now passing a GFP_NOFS flag to it, so remove the flag from it and from alloc_tree_mod_elem() and use it directly within alloc_tree_mod_elem(). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
When fixing up the first key of each node above the current level, at fixup_low_keys(), we are doing a GFP_ATOMIC allocation for inserting an operation record for the tree mod log. However we can do just fine with GFP_NOFS nowadays. The need for GFP_ATOMIC was for the old days when we had custom locks with spinning behaviour for extent buffers and we were in spinning mode while at fixup_low_keys(). Now we use rw semaphores for extent buffer locks, so we can safely use GFP_NOFS. Signed-off-by:
-
Boris Burkov authored
I have observed the following case play out and lead to unnecessary relocations: 1. write a file across multiple block groups 2. delete the file 3. several block groups fall below the reclaim threshold 4. reclaim the first, moving extents into the others 5. reclaim the others which are now actually very full, leading to poor reclaim behavior with lots of writing, allocating new block groups, etc. I believe the risk of missing some reasonable reclaims is worth it when traded off against the savings of avoiding overfull reclaims. Going forward, it could be interesting to make the check more advanced (zoned aware, fragmentation aware, etc...) so that it can be a really strong signal both at extent delete and reclaim time. Reviewed-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
Boris Burkov authored
As we delete extents from a block group, at some deletion we cross below the reclaim threshold. It is possible we are still in the middle of deleting more extents and might soon hit 0. If the block group is empty by the time the reclaim worker runs, we will still relocate it. This works just fine, as relocating an empty block group ultimately results in properly deleting it. However, we have more direct ways of removing empty block groups in the cleaner thread. Those are either async discard or the unused_bgs list. In fact, when we decide whether to relocate a block group during extent deletion, we do check for emptiness and prefer the discard/unused_bgs mechanisms when possible. Not using relocation for this case reduces some modest overhead from empty bg relocation: - extra transactions - extra metadata use/churn for creating relocation metadata - trying to read the extent tree to look for extents (and in this case finding none) Reviewed-by:
-
Filipe Manana authored
During fiemap, when determining if a data extent is shared or not, if we don't find the extent is directly shared, then we need to determine if it's shared through subtrees. For that we need to resolve the indirect reference we found in order to figure out the path in the inode's fs tree, which is a path starting at the fs tree's root node and going down to the leaf that contains the file extent item that points to the data extent. We then proceed to determine if any extent buffer in that path is shared with other trees or not. However when the generation of the data extent is more recent than the last generation used to snapshot the root, we don't need to determine the path, since the data extent can not be shared through snapshots. For this case we currently still determine the leaf of that path (at find_parent_nodes(), but then stop determining the other nodes in the path (at btrfs_is_data_extent_shared()) as it's pointless. So do the check of the data extent's generation earlier, at find_parent_nodes(), before trying to resolve the indirect reference to determine the leaf in the path. This saves us from doing one expensive b+tree search in the fs tree of our target inode, as well as other minor work. The following test was run on a non-debug kernel (Debian's default kernel config): $ cat test-fiemap.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi umount $DEV &> /dev/null mkfs.btrfs -f $DEV # Use compression to quickly create files with a lot of extents # (each with a size of 128K). mount -o compress=lzo $DEV $MNT # 40G gives 327680 extents, each with a size of 128K. xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar # Add some more files to increase the size of the fs and extent # trees (in the real world there's a lot of files and extents # from other files). xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1 xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2 xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3 umount $MNT mount -o compress=lzo $DEV $MNT start=$(date +%s%N) filefrag $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds (metadata not cached)" echo start=$(date +%s%N) filefrag $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds (metadata cached)" umount $MNT Before applying this patch: (...) /mnt/sdi/foobar: 327680 extents found fiemap took 1285 milliseconds (metadata not cached) /mnt/sdi/foobar: 327680 extents found fiemap took 742 milliseconds (metadata cached) After applying this patch: (...) /mnt/sdi/foobar: 327680 extents found fiemap took 689 milliseconds (metadata not cached) /mnt/sdi/foobar: 327680 extents found fiemap took 393 milliseconds (metadata cached) That's a -46.4% total reduction for the metadata not cached case, and a -47.0% reduction for the cached metadata case. The test is somewhat limited in the sense the gains may be higher in practice, because in the test the filesystem is small, so we have small fs and extent trees, plus there's no concurrent access to the trees as well, therefore no lock contention there. Signed-off-by:
-
Filipe Manana authored
During fiemap, when determining if a data extent is shared or not, if we don't find the extent is directly shared, then we need to determine if it's shared through subtrees. For that we need to resolve the indirect reference we found in order to figure out the path in the inode's fs tree, which is a path starting at the fs tree's root node and going down to the leaf that contains the file extent item that points to the data extent. We then proceed to determine if any extent buffer in that path is shared with other trees or not. Currently whenever we find the data extent that a file extent item points to is not directly shared, we always resolve the path in the fs tree, and then check if any extent buffer in the path is shared. This is a lot of work and when we have file extent items that belong to the same leaf, we have the same path, so we only need to calculate it once. This change does that, it keeps track of the current and previous leaf, and when we find that a data extent is not directly shared, we try to compute the fs tree path only once and then use it for every other file extent item in the same leaf, using the existing cached path result for the leaf as long as the cache results are valid. This saves us from doing expensive b+tree searches in the fs tree of our target inode, as well as other minor work. The following test was run on a non-debug kernel (Debian's default kernel config): $ cat test-with-snapshots.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi umount $DEV &> /dev/null mkfs.btrfs -f $DEV # Use compression to quickly create files with a lot of extents # (each with a size of 128K). mount -o compress=lzo $DEV $MNT # 40G gives 327680 extents, each with a size of 128K. xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar # Add some more files to increase the size of the fs and extent # trees (in the real world there's a lot of files and extents # from other files). xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1 xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2 xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3 # Create a snapshot so all the extents become indirectly shared # through subtrees, with a generation less than or equals to the # generation used to create the snapshot. btrfs subvolume snapshot -r $MNT $MNT/snap1 umount $MNT mount -o compress=lzo $DEV $MNT start=$(date +%s%N) filefrag $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds (metadata not cached)" echo start=$(date +%s%N) filefrag $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds (metadata cached)" umount $MNT Result before applying this patch: (...) /mnt/sdi/foobar: 327680 extents found fiemap took 1204 milliseconds (metadata not cached) /mnt/sdi/foobar: 327680 extents found fiemap took 729 milliseconds (metadata cached) Result after applying this patch: (...) /mnt/sdi/foobar: 327680 extents found fiemap took 732 milliseconds (metadata not cached) /mnt/sdi/foobar: 327680 extents found fiemap took 421 milliseconds (metadata cached) That's a -46.1% total reduction for the metadata not cached case, and a -42.2% reduction for the cached metadata case. The test is somewhat limited in the sense the gains may be higher in practice, because in the test the filesystem is small, so we have small fs and extent trees, plus there's no concurrent access to the trees as well, therefore no lock contention there. Signed-off-by:
-
Filipe Manana authored
Move the static functions to lookup and store sharedness check of an extent buffer to a location above find_all_parents(), because in the next patch the lookup function will be used by find_all_parents(). The store function is also moved just because it's the counter part to the lookup function and it's best to have their definitions close together. Signed-off-by:
-
Filipe Manana authored
During fiemap we process all the file extent items of an inode, by their file offset order (left to right b+tree order), and then check if the data extent they point at is shared or not. Until now we didn't cache those results, we only did it for b+tree nodes/leaves since for each unique b+tree path we have access to hundreds of file extent items. However, it is also common to repeat checking the sharedness of a particular data extent in a very short time window, and the cases that lead to that are the following: 1) COW writes. If have a file extent item like this: [ bytenr X, offset = 0, num_bytes = 512K ] file offset 0 512K Then a 4K write into file offset 64K happens, we end up with the following file extent item layout: [ bytenr X, offset = 0, num_bytes = 64K ] file offset 0 64K [ bytenr Y, offset = 0, num_bytes = 4K ] file offset 64K 68K [ bytenr X, offset = 68K, num_bytes = 444K ] file offset 68K 512K So during fiemap we well check for the sharedness of the data extent with bytenr X twice. Typically for COW writes and for at least moderately updated files, we end up with many file extent items that point to different sections of the same data extent. 2) Writing into a NOCOW file after a snapshot is taken. This happens if the target extent was created in a generation older than the generation where the last snapshot for the root (the tree the inode belongs to) was made. This leads to a scenario like the previous one. 3) Writing into sections of a preallocated extent. For example if a file has the following layout: [ bytenr X, offset = 0, num_bytes = 1M, type = prealloc ] 0 1M After doing a 4K write into file offset 0 and another 4K write into offset 512K, we get the following layout: [ bytenr X, offset = 0, num_bytes = 4K, type = regular ] 0 4K [ bytenr X, offset = 4K, num_bytes = 508K, type = prealloc ] 4K 512K [ bytenr X, offset = 512K, num_bytes = 4K, type = regular ] 512K 516K [ bytenr X, offset = 516K, num_bytes = 508K, type = prealloc ] 516K 1M So we end up with 4 consecutive file extent items pointing to the data extent at bytenr X. 4) Hole punching in the middle of an extent. For example if a file has the following file extent item: [ bytenr X, offset = 0, num_bytes = 8M ] 0 8M And then hole is punched for the file range [4M, 6M[, we our file extent item split into two: [ bytenr X, offset = 0, num_bytes = 4M ] 0 4M [ 2M hole, implicit or explicit depending on NO_HOLES feature ] 4M 6M [ bytenr X, offset = 6M, num_bytes = 2M ] 6M 8M Again, we end up with two file extent items pointing to the same data extent. 5) When reflinking (clone and deduplication) within the same file. This is probably the least common case of all. In cases 1, 2, 4 and 4, when we have multiple file extent items that point to the same data extent, their distance is usually short, typically separated by a few slots in a b+tree leaf (or across sibling leaves). For case 5, the distance can vary a lot, but it's typically the less common case. This change caches the result of the sharedness checks for data extents, but only for the last 8 extents that we notice that our inode refers to with multiple file extent items. Whenever we want to check if a data extent is shared, we lookup the cache which consists of doing a linear scan of an 8 elements array, and if we find the data extent there, we return the result and don't check the extent tree and delayed refs. The array/cache is small so that doing the search has no noticeable negative impact on the performance in case we don't have file extent items within a distance of 8 slots that point to the same data extent. Slots in the cache/array are overwritten in a simple round robin fashion, as that approach fits very well. Using this simple approach with only the last 8 data extents seen is effective as usually when multiple file extents items point to the same data extent, their distance is within 8 slots. It also uses very little memory and the time to cache a result or lookup the cache is negligible. The following test was run on non-debug kernel (Debian's default kernel config) to measure the impact in the case of COW writes (first example given above), where we run fiemap after overwriting 33% of the blocks of a file: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi umount $DEV &> /dev/null mkfs.btrfs -f $DEV mount $DEV $MNT FILE_SIZE=$((1 * 1024 * 1024 * 1024)) # Create the file full of 1M extents. xfs_io -f -s -c "pwrite -b 1M -S 0xab 0 $FILE_SIZE" $MNT/foobar block_count=$((FILE_SIZE / 4096)) # Overwrite about 33% of the file blocks. overwrite_count=$((block_count / 3)) echo -e "\nOverwriting $overwrite_count 4K blocks (out of $block_count)..." RANDOM=123 for ((i = 1; i <= $overwrite_count; i++)); do off=$(((RANDOM % block_count) * 4096)) xfs_io -c "pwrite -S 0xcd $off 4K" $MNT/foobar > /dev/null echo -ne "\r$i blocks overwritten..." done echo -e "\n" # Unmount and mount to clear all cached metadata. umount $MNT mount $DEV $MNT start=$(date +%s%N) filefrag $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds" umount $MNT Result before applying this patch: fiemap took 128 milliseconds Result after applying this patch: fiemap took 92 milliseconds (-28.1%) The test is somewhat limited in the sense the gains may be higher in practice, because in the test the filesystem is small, so we have small fs and extent trees, plus there's no concurrent access to the trees as well, therefore no lock contention there. Signed-off-by: -
Filipe Manana authored
At find_parent_nodes(), at its last step, when iterating over all direct references, we are checking if we have a share context and if we have a reference with a different root from the one in the share context. However that logic is pointless because of two reasons: 1) After the previous patch in the series (subject "btrfs: remove roots ulist when checking data extent sharedness"), the roots argument is always NULL when using a share check context (struct share_check), so this code is never triggered; 2) Even before that previous patch, we could not hit this code because if we had a reference with a root different from the one in our share context, then we would have exited earlier when doing either of the following: - Adding a second direct ref to the direct refs red black tree resulted in extent_is_shared() returning true when called from add_direct_ref() -> add_prelim_ref(), after processing delayed references or while processing references in the extent tree; - When adding a second reference to the indirect refs red black tree (same as above, extent_is_shared() returns true); - If we only have one indirect reference and no direct references, then when resolving it at resolve_indirect_refs() we immediately return that the target extent is shared, therefore never reaching that loop that iterates over all direct references at find_parent_nodes(); - If we have 1 indirect reference and 1 direct reference, then we also exit early because extent_is_shared() ends up returning true when called through add_prelim_ref() (by add_direct_ref() or add_indirect_ref()) or add_delayed_refs(). Same applies as when having a combination of direct, indirect and indirect with missing key references. This logic had been obsoleted since commit 3ec4d323 ("btrfs: allow backref search checks for shared extents"), which introduced the early exits in case an extent is shared. So just remove that logic, and assert at find_parent_nodes() that when we have a share context we don't have a roots ulist and that we haven't found the extent to be directly shared after processing delayed references and all references from the extent tree. Signed-off-by: -
Filipe Manana authored
Currently btrfs_is_data_extent_shared() is passing a ulist for the roots argument of find_parent_nodes(), however it does not use that ulist for anything and for this context that list always ends up with at most one element. Since find_parent_nodes() is able to deal with a NULL ulist for its roots argument, make btrfs_is_data_extent_shared() pass it NULL and avoid the burden of allocating memory for the unnused roots ulist, initializing it, releasing it and allocating one struct ulist_node for it during the call to find_parent_nodes(). Signed-off-by:
-
Filipe Manana authored
When calling btrfs_is_data_extent_shared() we pass two ulists that were allocated by the caller. This is because the single caller, fiemap, calls btrfs_is_data_extent_shared() multiple times and the ulists can be reused, instead of allocating new ones before each call and freeing them after each call. Now that we have a context structure/object that we pass to btrfs_is_data_extent_shared(), we can move those ulists to it, and hide their allocation and the context's allocation in a helper function, as well as the freeing of the ulists and the context object. This allows to reduce the number of parameters passed to btrfs_is_data_extent_shared(), the need to pass the ulists from extent_fiemap() to fiemap_process_hole() and having the caller deal with allocating and releasing the ulists. Also rename one of the ulists from 'tmp' / 'tmp_ulist' to 'refs', since that's a much better name as it reflects what the list is used for (and matching the argument name for find_parent_nodes()). Signed-off-by:
-
Filipe Manana authored
Right now we are using a struct btrfs_backref_shared_cache to pass state across multiple btrfs_is_data_extent_shared() calls. The structure's name closely follows its current purpose, which is to cache previous checks for the sharedness of metadata extents. However we will start using the structure for more things other than caching sharedness checks, so rename it to struct btrfs_backref_share_check_ctx. Signed-off-by:
-
Filipe Manana authored
Currently we pass a root and an inode number as arguments for btrfs_is_data_extent_shared() and the inode number is always from an inode that belongs to that root (it wouldn't make sense otherwise). In every context that we call btrfs_is_data_extent_shared() (fiemap only), we have an inode available, so directly pass the inode to the function instead of a root and inode number. This reduces the number of parameters and it makes the function's signature conform to most other functions we have. Signed-off-by:
-
Filipe Manana authored
When doing backref walking to determine if an extent is shared, we are testing if the inode number, stored in the 'inum' field of struct share_check, is 0. However that can never be case, since the all instances of the structure are created at btrfs_is_data_extent_shared(), which always initializes it with the inode number from a fs tree (and the number for any inode from any tree can never be 0). So remove the checks. Signed-off-by:
-
Filipe Manana authored
When doing backref walking to determine if an extent is shared, we are testing the root_objectid of the given share_check struct is 0, but that is an impossible case, since btrfs_is_data_extent_shared() always initializes the root_objectid field with the id of the given root, and no root can have an objectid of 0. So remove those checks. Signed-off-by:
-
Filipe Manana authored
When allocating an extent buffer, at __alloc_extent_buffer(), there's no point in explicitly assigning zero to the bflags field of the new extent buffer because we allocated it with kmem_cache_zalloc(). So just remove the redundant initialization, it saves one mov instruction in the generated assembly code for x86_64 ("movq $0x0,0x10(%rax)"). Signed-off-by: -
Filipe Manana authored
At btrfs_clone_extent_buffer(), before allocating the pages array for the new extent buffer we are calling memset() to zero out the pages array of the extent buffer. This is pointless however, because the extent buffer already has every element in its pages array pointing to NULL, as it was allocated with kmem_cache_zalloc(). The memset() was introduced with commit dd137dd1 ("btrfs: factor out allocating an array of pages"), but even before that commit we already depended on the pages array being initialized to NULL for the error paths that need to call btrfs_release_extent_buffer(). So remove the memset(), it's useless and slightly increases the object text size. Before this change: $ size fs/btrfs/extent_io.o text data bss dec hex filename 70580 5469 40 76089 12939 fs/btrfs/extent_io.o After this change: $ size fs/btrfs/extent_io.o text data bss dec hex filename 70564 5469 40 76073 12929 fs/btrfs/extent_io.o Signed-off-by:
-
Filipe Manana authored
During fiemap and lseek (hole and data seeking), there's no point in iterating the inode's io tree to count delalloc bits if the inode's delalloc bytes counter has a value of zero, as that counter is updated whenever we set a range for delalloc or clear a range from delalloc. So skip the counting and io tree iteration if the inode's delalloc bytes counter has a value of zero. This helps save time when processing a file range corresponding to a hole or prealloc (unwritten) extent. This patch is part of a series comprised of the following patches: btrfs: get the next extent map during fiemap/lseek more efficiently btrfs: skip unnecessary extent map searches during fiemap and lseek btrfs: skip unnecessary delalloc search during fiemap and lseek The following test was performed on a release kernel (Debian's default kernel config) before and after applying those 3 patches. # Wrapper to call fiemap in extent count only mode. # (struct fiemap::fm_extent_count set to 0) $ cat fiemap.c #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <fcntl.h> #include <errno.h> #include <string.h> #include <sys/ioctl.h> #include <linux/fs.h> #include <linux/fiemap.h> int main(int argc, char **argv) { struct fiemap fiemap = { 0 }; int fd; if (argc != 2) { printf("usage: %s <path>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { fprintf(stderr, "error opening file: %s\n", strerror(errno)); return 1; } /* fiemap.fm_extent_count set to 0, to count extents only. */ fiemap.fm_length = FIEMAP_MAX_OFFSET; if (ioctl(fd, FS_IOC_FIEMAP, &fiemap) < 0) { fprintf(stderr, "fiemap error: %s\n", strerror(errno)); return 1; } close(fd); printf("fm_mapped_extents = %d\n", fiemap.fm_mapped_extents); return 0; } $ gcc -o fiemap fiemap.c And the wrapper shell script that creates a file with many holes and runs fiemap against it: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT FILE_SIZE=$((1 * 1024 * 1024 * 1024)) echo -n > $MNT/foobar for ((off = 0; off < $FILE_SIZE; off += 8192)); do xfs_io -c "pwrite -S 0xab $off 4K" $MNT/foobar > /dev/null done # flush all delalloc sync start=$(date +%s%N) ./fiemap $MNT/foobar end=$(date +%s%N) dur=$(( (end - start) / 1000000 )) echo "fiemap took $dur milliseconds" umount $MNT Result before applying patchset: fm_mapped_extents = 131072 fiemap took 63 milliseconds Result after applying patchset: fm_mapped_extents = 131072 fiemap took 39 milliseconds (-38.1%) Running the same test for a 512M file instead of a 1G file, gave the following results. Result before applying patchset: fm_mapped_extents = 65536 fiemap took 29 milliseconds Result after applying patchset: fm_mapped_extents = 65536 fiemap took 20 milliseconds (-31.0%) Signed-off-by: -
Filipe Manana authored
If we have no outstanding extents it means we don't have any extent maps corresponding to delalloc that is flushing, as when an ordered extent is created we increment the number of outstanding extents to 1 and when we remove the ordered extent we decrement them by 1. So skip extent map tree searches if the number of outstanding ordered extents is 0, saving time as the tree is not empty if we have previously made some reads or flushed delalloc, as in those cases it can have a very large number of extent maps for files with many extents. This helps save time when processing a file range corresponding to a hole or prealloc (unwritten) extent. The next patch in the series has a performance test in its changelog and its subject is: "btrfs: skip unnecessary delalloc search during fiemap and lseek" Signed-off-by: -
Filipe Manana authored
At find_delalloc_subrange(), when we need to get the next extent map, we do a full search on the extent map tree (a red black tree). This is fine but it's a lot more efficient to simply use rb_next(), which typically requires iterating over less nodes of the tree and never needs to compare the ranges of nodes with the one we are looking for. So add a public helper to extent_map.{h,c} to get the extent map that immediately follows another extent map, using rb_next(), and use that helper at find_delalloc_subrange(). Signed-off-by: -
Qu Wenruo authored
For Btrfs RAID56, we have a caching system for btrfs raid bios (rbio). We call cache_rbio_pages() to mark a qualified rbio ready for cache. The timing happens at: - finish_rmw() At this timing, we have already read all necessary sectors, along with the rbio sectors, we have covered all data stripes. - __raid_recover_end_io() At this timing, we have rebuild the rbio, thus all data sectors involved (either from stripe or bio list) are uptodate now. Thus at the timing of cache_rbio_pages(), we should have all data sectors uptodate. This patch will make it explicit that all data sectors are uptodate at cache_rbio_pages() timing, mostly to prepare for the incoming verification at RMW time. This patch will add: - Extra ASSERT()s in cache_rbio_pages() This is to make sure all data sectors, which are not covered by bio, are already uptodate. - Extra ASSERT()s in steal_rbio() Since only cached rbio can be stolen, thus every data sector should already be uptodate in the source rbio. - Update __raid_recover_end_io() to update recovered sector->uptodate Previously __raid_recover_end_io() will only mark failed sectors uptodate if it's doing an RMW. But this can trigger new ASSERT()s, as for recovery case, a recovered failed sector will not be marked uptodate, and trigger ASSERT() in later cache_rbio_pages() call. Signed-off-by:
-
Qu Wenruo authored
Currently inside alloc_rbio(), we allocate a larger memory to contain the following members: - struct btrfs_raid_rbio itself - stripe_pages array - bio_sectors array - stripe_sectors array - finish_pointers array Then update rbio pointers to point the extra space after the rbio structure itself. Thus it introduced a complex CONSUME_ALLOC() macro to help the thing. This is too hacky, and is going to make later pointers expansion harder. This patch will change it to use regular kcalloc() for each pointer inside btrfs_raid_bio, making the later expansion much easier. And introduce a helper free_raid_bio_pointers() to free up all the pointer members in btrfs_raid_bio, which will be used in both free_raid_bio() and error path of alloc_rbio(). Signed-off-by:
-
Qu Wenruo authored
The cleanup involves two things: - Remove the "__" prefix There is no naming confliction. - Remove the forward declaration There is no special function call involved. Signed-off-by:
-
Josef Bacik authored
Inside of FB, as well as some user reports, we've had a consistent problem of occasional ENOSPC transaction aborts. Inside FB we were seeing ~100-200 ENOSPC aborts per day in the fleet, which is a really low occurrence rate given the size of our fleet, but it's not nothing. There are two causes of this particular problem. First is delayed allocation. The reservation system for delalloc assumes that contiguous dirty ranges will result in 1 file extent item. However if there is memory pressure that results in fragmented writeout, or there is fragmentation in the block groups, this won't necessarily be true. Consider the case where we do a single 256MiB write to a file and then close it. We will have 1 reservation for the inode update, the reservations for the checksum updates, and 1 reservation for the file extent item. At some point later we decide to write this entire range out, but we're so fragmented that we break this into 100 different file extents. Since we've already closed the file and are no longer writing to it there's nothing to trigger a refill of the delalloc block rsv to satisfy the 99 new file extent reservations we need. At this point we exhaust our delalloc reservation, and we begin to steal from the global reserve. If you have enough of these cases going in parallel you can easily exhaust the global reserve, get an ENOSPC at btrfs_alloc_tree_block() time, and then abort the transaction. The other case is the delayed refs reserve. The delayed refs reserve updates its size based on outstanding delayed refs and dirty block groups. However we only refill this block reserve when returning excess reservations and when we call btrfs_start_transaction(root, X). We will reserve 2*X credits at transaction start time, and fill in X into the delayed refs reserve to make sure it stays topped off. Generally this works well, but clearly has downsides. If we do a particularly delayed ref heavy operation we may never catch up in our reservations. Additionally running delayed refs generates more delayed refs, and at that point we may be committing the transaction and have no way to trigger a refill of our delayed refs rsv. Then a similar thing occurs with the delalloc reserve. Generally speaking we well over-reserve in all of our block rsvs. If we reserve 1 credit we're usually reserving around 264k of space, but we'll often not use any of that reservation, or use a few blocks of that reservation. We can be reasonably sure that as long as you were able to reserve space up front for your operation you'll be able to find space on disk for that reservation. So introduce a new flushing state, BTRFS_RESERVE_FLUSH_EMERGENCY. This gets used in the case that we've exhausted our reserve and the global reserve. It simply forces a reservation if we have enough actual space on disk to make the reservation, which is almost always the case. This keeps us from hitting ENOSPC aborts in these odd occurrences where we've not kept up with the delayed work. Fixing this in a complete way is going to be relatively complicated and time consuming. This patch is what I discussed with Filipe earlier this year, and what I put into our kernels inside FB. With this patch we're down to 1-2 ENOSPC aborts per week, which is a significant reduction. This is a decent stop gap until we can work out a more wholistic solution to these two corner cases. Reviewed-by:
-
Josef Bacik authored
These are wrapped in CONFIG_FS_VERITY, but we can have the definitions without verity enabled. Move these definitions up with the other accessor helpers. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Josef Bacik authored
This uses btrfs_header_nritems, which I will be moving out of ctree.h. In order to avoid needing to include the relevant header in ctree.h, simply move this helper function into ctree.c. Reviewed-by:
-
Josef Bacik authored
This is local to the free-space-cache.c code, remove it from ctree.h and inode.c, create new init/exit functions for the cachep, and move it locally to free-space-cache.c. Reviewed-by:
-
Josef Bacik authored
This is local to the ctree code, remove it from ctree.h and inode.c, create new init/exit functions for the cachep, and move it locally to ctree.c. Reviewed-by:
-
Josef Bacik authored
This is local to the transaction code, remove it from ctree.h and inode.c, create new helpers in the transaction to handle the init work and move the cachep locally to transaction.c. Reviewed-by:
-
Josef Bacik authored
This isn't used outside of inode.c, there's no reason to define it in btrfs_inode.h. Drop the inline and add __cold as it's for errors that are not in any hot path. Reviewed-by:
-
Josef Bacik authored
This code is used in space-info.c, move the definitions to space-info.h. Reviewed-by:
-
Josef Bacik authored
This function uses functions that are not defined in block-group.h, move it into block-group.c in order to keep the header clean. Reviewed-by:
-
Josef Bacik authored
These definitions are used for discard statistics, move them out of ctree.h and put them in free-space-cache.h. Reviewed-by:
-
Josef Bacik authored
This is only used locally in scrub.c, move it out of ctree.h into scrub.c. Reviewed-by:
-
