Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.

Fixes: 357f203b ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-03-22

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-11 complains about a prototype declaration that is different
from the function definition:

drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
      |                                        ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
   62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
      |                                        ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  790 | u16 capi20_get_serial(u32 contr, u8 *serial)
      |                                  ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
   64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
      |                                  ~~~^~~~~~~~~~~~~~~~~~~~~~~

Change the definition to make them match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.

When ecpu bit is used, firmware returns a syndrome.

mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22

Hence, avoid using ecpu bit.

Fixes: 8f010541 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b8 ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to
determine if HTB and/or PTP offloads are active. If they are, it
calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from
selecting HTB and PTP queues for regular traffic. However, before the
channels are first activated, num_tc_x_num_ch is zero. If
ndo_select_queue gets called at this point, the HTB/PTP check will pass,
and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch,
which equals to zero.

This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero
value before registering the netdev.

Fixes: 214baf22 ("net/mlx5e: Support HTB offload")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Expose error value when failing to comply to command:
$ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off]

Fixes: be7e87f9 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Setting connection tracking OVS flows and then setting non-CT flows that
use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not
being offloaded.

Fix by using a stricter condition in modify_header_match_supported() to
check tuple rewrite support only for flows with CT action. The check is
factored out into standalone modify_tuple_supported() function to aid
readability.

Fixes: 7e36feeb ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, we support hardware offload only for MPLS over UDP.
However, rules matching on MPLS parameters are now wrongly offloaded
for regular MPLS, without actually taking the parameters into
consideration when doing the offload.
Fix it by rejecting such unsupported rules.

Fixes: 72046a91 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The multicast counter got removed from uplink representor due to the
cited patch.

Fixes: 47c97e6b ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.

When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
  net_device pointer

So we should protect against that case.

The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.

Fixes: f68cbaed ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bd ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There ended up being two sections with the same title. Combine the two
into one section.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/subsytem/subsystem/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IOMMU errors have been reported if WoL is enabled and interface is
brought down. It turned out that the network chip triggers DMA
transfers after the DMA buffers have been freed. For WoL to work we
need to leave rx enabled, therefore simply stop the chip from being
a DMA busmaster.

Fixes: 567ca57f ("r8169: add rtl8169_up")
Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.12-20210320' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-03-20

this is a pull request of 2 patches for net/master.

The first patch is by Oliver Hartkopp. He fixes the TX-path in the
ISO-TP protocol by properly initializing the outgoing CAN frames.

The second patch is by me and reverts a patch from my previous pull
request which added MODULE_SUPPORTED_DEVICE to the peak_usb driver. In
the mean time in Linus's tree the entirely MODULE_SUPPORTED_DEVICE was
removed. So this reverts the adding of the new MODULE_SUPPORTED_DEVICE
to avoid the merge conflict.

If you prefer to resolve the merge conflict by hand, I'll send a new
pull request without that patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
ipa: fix validation

There is sanity checking code in the IPA driver that's meant to be
enabled only during development.  This allows the driver to make
certain assumptions, but not have to verify those assumptions are
true at (operational) runtime.  This code is built conditional on
IPA_VALIDATION, set (if desired) inside the IPA makefile.

Unfortunately, this validation code has some errors.  First, there
are some mismatched arguments supplied to some dev_err() calls in
ipa_cmd_table_valid() and ipa_cmd_header_valid(), and these are
exposed if validation is enabled.  Second, the tag that enables
this conditional code isn't used consistently (it's IPA_VALIDATE
in some spots and IPA_VALIDATION in others).

This series fixes those two problems with the conditional validation
code.

Version 2 removes the two patches that introduced ipa_assert().  It
also modifies the description in the first patch so that it mentions
the changes made to ipa_cmd_table_valid().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them.  This way we avoid having to check for errors
when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.

There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it.  Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA
memory range.

Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2021-03-20

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).

The main changes are:

1) Use correct nops in fexit trampoline, from Stanislav.

2) Fix BTF dump, from Jean-Philippe.

3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 6417f031 ("module: remove never implemented
MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was
removed from the kerne entirely. Shortly before this patch was applied
mainline the commit 59ec7b89 ("can: peak_usb: add forgotten
supported devices") was added to net/master. As this would result in a
merge conflict, let's revert this patch.

Fixes: 59ec7b89 ("can: peak_usb: add forgotten supported devices")
Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.deSuggested-by: Leon Romanovsky <leon@kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Commit d4eb538e ("can: isotp: TX-path: ensure that CAN frame flags are
initialized") ensured the TX flags to be properly set for outgoing CAN
frames.

In fact the root cause of the issue results from a missing initialization
of outgoing CAN frames created by isotp. This is no problem on the CAN bus
as the CAN driver only picks the correctly defined content from the struct
can(fd)_frame. But when the outgoing frames are monitored (e.g. with
candump) we potentially leak some bytes in the unused content of
struct can(fd)_frame.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.netSigned-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

__bpf_arch_text_poke does rewrite only for atomic nop5, emit_nops(xxx, 5)
emits non-atomic one which breaks fentry/fexit with k8 atomics:

P6_NOP5 == P6_NOP5_ATOMIC (0f1f440000 == 0f1f440000)
K8_NOP5 != K8_NOP5_ATOMIC (6666906690 != 6666666690)

Can be reproduced by doing "ideal_nops = k8_nops" in "arch_init_ideal_nops()
and running fexit_bpf2bpf selftest.

Fixes: e21aa341 ("bpf: Fix fexit trampoline.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210320000001.915366-1-sdf@google.com

The syzbot reported a memleak as follows:

BUG: memory leak
unreferenced object 0xffff888101b41d00 (size 120):
  comm "kworker/u4:0", pid 8, jiffies 4294944270 (age 12.780s)
  backtrace:
    [<ffffffff8125dc56>] alloc_pid+0x66/0x560
    [<ffffffff81226405>] copy_process+0x1465/0x25e0
    [<ffffffff81227943>] kernel_clone+0xf3/0x670
    [<ffffffff812281a1>] kernel_thread+0x61/0x80
    [<ffffffff81253464>] call_usermodehelper_exec_work
    [<ffffffff81253464>] call_usermodehelper_exec_work+0xc4/0x120
    [<ffffffff812591c9>] process_one_work+0x2c9/0x600
    [<ffffffff81259ab9>] worker_thread+0x59/0x5d0
    [<ffffffff812611c8>] kthread+0x178/0x1b0
    [<ffffffff8100227f>] ret_from_fork+0x1f/0x30

unreferenced object 0xffff888110ef5c00 (size 232):
  comm "kworker/u4:0", pid 8414, jiffies 4294944270 (age 12.780s)
  backtrace:
    [<ffffffff8154a0cf>] kmem_cache_zalloc
    [<ffffffff8154a0cf>] __alloc_file+0x1f/0xf0
    [<ffffffff8154a809>] alloc_empty_file+0x69/0x120
    [<ffffffff8154a8f3>] alloc_file+0x33/0x1b0
    [<ffffffff8154ab22>] alloc_file_pseudo+0xb2/0x140
    [<ffffffff81559218>] create_pipe_files+0x138/0x2e0
    [<ffffffff8126c793>] umd_setup+0x33/0x220
    [<ffffffff81253574>] call_usermodehelper_exec_async+0xb4/0x1b0
    [<ffffffff8100227f>] ret_from_fork+0x1f/0x30

After the UMD process exits, the pipe_to_umh/pipe_from_umh and
tgid need to be released.

Fixes: d71fa5c9 ("bpf: Add kernel module with user mode driver that populates bpffs.")
Reported-by: syzbot+44908bb56d2bfe56b28e@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210317030915.2865-1-qiang.zhang@windriver.com

Jean-Philippe Brucker says:

====================

Fix an issue with the libbpf BTF dump, see patch 1 for details.

Since [v1] I added the selftest in patch 2, though I couldn't figure out
a way to make it independent from the order in which debug info is
issued by the compiler.

[v1]: https://lore.kernel.org/bpf/20210318122700.396574-1-jean-philippe@linaro.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Bpftool used to issue forward declarations for a struct used as part of
a pointer to array, which is invalid. Add a test to check that the
struct is fully defined in this case:

	@@ -134,9 +134,9 @@
	 	};
	 };

	-struct struct_in_array {};
	+struct struct_in_array;

	-struct struct_in_array_typed {};
	+struct struct_in_array_typed;

	 typedef struct struct_in_array_typed struct_in_array_t[2];

	@@ -189,3 +189,7 @@
	 	struct struct_with_embedded_stuff _14;
	 };

	+struct struct_in_array {};
	+
	+struct struct_in_array_typed {};
	+
	...
	#13/1 btf_dump: syntax:FAIL
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org

The vmlinux.h generated from BTF is invalid when building
drivers/phy/ti/phy-gmii-sel.c with clang:

vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’
61702 |  const struct reg_field (*regfields)[3];
      |                           ^~~~~~~~~

bpftool generates a forward declaration for this struct regfield, which
compilers aren't happy about. Here's a simplified reproducer:

	struct inner {
		int val;
	};
	struct outer {
		struct inner (*ptr_to_array)[2];
	} A;

After build with clang -> bpftool btf dump c -> clang/gcc:
./def-clang.h:11:23: error: array has incomplete element type 'struct inner'
        struct inner (*ptr_to_array)[2];

Member ptr_to_array of struct outer is a pointer to an array of struct
inner. In the DWARF generated by clang, struct outer appears before
struct inner, so when converting BTF of struct outer into C, bpftool
issues a forward declaration to struct inner. With GCC the DWARF info is
reversed so struct inner gets fully defined.

That forward declaration is not sufficient when compilers handle an
array of the struct, even when it's only used through a pointer. Note
that we can trigger the same issue with an intermediate typedef:

	struct inner {
	        int val;
	};
	typedef struct inner inner2_t[2];
	struct outer {
	        inner2_t *ptr_to_array;
	} A;

Becomes:

	struct inner;
	typedef struct inner inner2_t[2];

And causes:

./def-clang.h:10:30: error: array has incomplete element type 'struct inner'
	typedef struct inner inner2_t[2];

To fix this, clear through_ptr whenever we encounter an intermediate
array, to make the inner struct part of a strong link and force full
declaration.

Fixes: 351131b5 ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org

The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01
should be inner ECT(0) + outer ECT(1). Based on the description of
__INET_ECN_decapsulate, the final decapsulate value should be
ECT(1). So fix the test expect value to 0x01.

Before the fix:
TEST: VXLAN: ECN decap: 01/02->0x02                                 [FAIL]
        Expected to capture 10 packets, got 0.

After the fix:
TEST: VXLAN: ECN decap: 01/02->0x01                                 [ OK ]

Fixes: a0b61f3d ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mailing list for MPTCP maintenance has moved to the
kernel.org-supported mptcp@lists.linux.dev address.

Complete, combined archives for both lists are now hosted at
https://lore.kernel.org/mptcp

Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-03-19

This series contains updates to e1000e and igb drivers.

Tom Seewald fixes duplicate guard issues by including the driver name in
the guard for e1000e and igb.

Jesse adds checks that timestamping is on and valid to avoid possible
issues with a misinterpreted time stamp for igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.

Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL)
This is due to tx_fifo_size being 0, since this value is used to compute valid
MTU range.
Like dwmac-sunxi (with commit 806fd188 ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
I have used values from datasheets.
After this patch, setting a non-default MTU (like 1000) value works and network is still useable.

Tested-on: sun8i-h3-orangepi-pc
Tested-on: sun8i-r40-bananapi-m2-ultra
Tested-on: sun50i-a64-bananapi-m64
Tested-on: sun50i-h5-nanopi-neo-plus2
Tested-on: sun50i-h6-pine-h64
Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the USB host controller is EHCI, the throughput is reduced from
300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to
32K.

According to the EHCI spec, the maximum size of the qTD is 20K.
Therefore, when the driver uses more than 20K buffer, the latency
time of EHCI would be increased. And, it let the RTL8153A get worse
throughput.

However, the driver uses alloc_pages() for rx buffer, so I limit
the rx buffer to 16K rather than 20K.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923
Fixes: ec5791c2 ("r8152: separate the rx buffer size")
Reported-by: Robert Davies <robdavies1977@gmail.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/recalcultion/recalculation/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.

So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:

  https://bugzilla.kernel.org/show_bug.cgi?id=212227

As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:

  unregister_netdevice: waiting for xxx to become free. Usage count = 1
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8 ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a couple of checks to make sure timestamping is on and that the
timestamp value from DMA is valid. This avoids any functional issues
that could come from a misinterpreted time stamp.

One of the functions changed doesn't need a return value added because
there was no value in checking from the calling locations.

While here, fix a couple of reverse christmas tree issues next to
the code being changed.

Fixes: f56e7bba ("igb: Pull timestamp from fragment before adding it to skb")
Fixes: 9cbc948b ("igb: add XDP support")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The include guard "_E1000_HW_H_" is used by two separate header files in
two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the
same include guard macro in more than one header file may cause
unexpected behavior from the compiler. Fix this by renaming the
duplicate guard in the igb driver.

Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The include guard "_E1000_HW_H_" is used by header files in three
different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h).
Using the same include guard macro in more than one header file may
cause unexpected behavior from the compiler. Fix the duplicate include
guard in the e1000e driver by renaming it.

Fixes: bc7f75fa ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Set the disconnected flag before releasing the data interface in case
netdev registration fails to avoid having the disconnect callback try to
deregister the never registered netdev (and trigger a WARN_ON()).

Fixes: 87cf6560 ("USB host CDC Phonet network interface driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Several patches to testore use of memory barriers instead of RCU to
   ensure consistent access to ruleset, from Mark Tomlinson.

2) Fix dump of expectation via ctnetlink, from Florian Westphal.

3) GRE helper works for IPv6, from Ludovic Senecaux.

4) Set error on unsupported flowtable flags.

5) Use delayed instead of deferrable workqueue in the flowtable,
   from Yinjun Zhang.

6) Fix spurious EEXIST in case of add-after-delete flowtable in
   the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.

Since commit ff927412 ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names.  __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.

This demonstrates the bug:

    # rmmod dummy 2>/dev/null
    # ip link property add dev lo altname dummy0
    # modprobe dummy numdummies=1
    modprobe: ERROR: could not insert 'dummy': Too many open files in system

Instead of creating a device named dummy1, modprobe fails.

Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 92c8c16f ("powerpc/embedded6xx: Remove C2K board support")
removed last selector of CONFIG_MV64X60.

As it is not a user selectable config item, all references to it
are stale. Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Kelam says:

====================
octeontx2: miscellaneous fixes

This series of patches fixes various issues related to NPC MCAM entry
management, debugfs, devlink, CGX LMAC mapping, RSS config etc

Change-log:
v2:
Fixed below review comments
	- corrected Fixed tag syntax with 12 digits SHA1
          and providing space between SHA1 and subject line
	- remove code improvement patch
	- make commit description more clear
====================
Signed-off-by: David S. Miller <davem@davemloft.net>