When entering an IOCTL, the driver prints a message in case device is
not operational. This message should be printed in debug level as
it can spam the kernel log and it is not an error.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update common firmware files with the latest version.
There is no functional change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update gaudi2 firmware files with the latest version.
There is no functional change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update some register files with the latest h/w auto-generated files.
There is no functional change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Remove the distinction between user CB and kernel CB, and verify for
both that they are not destroyed more than once.

As kernel CB might be taken from the pre-allocated CB pool, so we need
to clear the handle destroyed indication when returning a CB to the
pool.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When doing p2p with a NIC device, the NIC needs to make sure all the
writes to the HBM (through the PCI bar of the Gaudi device) were
flushed.

It can be done by either the NIC or the host reading through the PCI
bar.

To support the host side, we supply a simple uapi to perform this flush
through the driver, because the user can't create such a transaction
by itself (the PCI bar isn't exposed to normal users).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.

This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.

Update the MAINTAINERS file to reflect this change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Move the habanalabs.h uapi file from include/uapi/misc to
include/uapi/drm, and rename it to habanalabs_accel.h.

This is required before moving the actual driver to the accel
subsystem.

Update MAINTAINERS file accordingly.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The dma-buf private object is freed if a call to dma_buf_fd() fails,
and because a file was already associated with the dma-buf in
dma_buf_export(), the release op will be called and will use this
object.

Mark the 'priv' field as NULL in this case, and avoid accessing it from
the release op.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to have the no-cause error print be more informative,
we add the event description in addition to the event id.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add a uAPI, as part of the INFO IOCTL, to allow users to send
requests directly to f/w, according to a pre-defined set of opcodes
that the f/w exposes.

The f/w will put the result in a kernel-allocated buffer, which the
driver will then copy to the user-supplied buffer.

This will allow f/w tools to communicate directly with the f/w
without the need to add a new uAPI to the driver for each new type
of request.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

An Ascii message that is sent from preboot towards the driver
will indicate the specific error that occurred on the f/w.
This commit supports that message and parse the ascii string
in order to print it into the kernel log

The commit also changes the way the descriptor struct is declared.
While its size increased (it now above 1024 bytes), it will be
allocated by using kmalloc instead of stack declaration.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

- Add missing documentation of set DRAM props
- fix typo
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

vzalloc expects void* and not void __iomem*.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Instead of waiting for BTM indication we should wait for preboot ready.
Consider the below scenario:
    1. FW update is being triggered
           - setting the dirty bit
    2. hard reset will be triggered due to the dirty bit
    3. FW initiates the reset:
           - dirty bit cleared
           - BTM indication cleared
           - preboot ready indication cleared
    4. during hard reset:
           - BTM indication will be set
           - BIST test performed and another reset triggered
    5. only after this reset the preboot will set the preboot ready

When polling on BTM indication alone we can lose sync with FW while
trying to communicate with FW that is during reset.
To overcome this we will always wait to preboot ready indication.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Need to put fences even if an unexpected status value is received while
waiting for a fence.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The -ERESTARTSYS return value is not handled correctly when a signal is
received while waiting for CS completion.
This can lead to bad output values to user when waiting for a single CS
completion, and more severe, it can cause a non-stopping loop when
waiting to multi-CS completion and until a CS timeout.

Fix the handling and exit the waiting if this return value is received.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This patch fixes a bug that was found in the dmabuf flow.
Bug description as found on Gaudi2 device:
1. User allocates 4MB of device memory
    - Note that although the allocation size was 4MB the HMMU allocated
      a full page of 768MB to back the request.
    - The user gets a memory handle that points to a single page (768MB)
    - Mapping the handle, the user gets virtual address to the start of
      the page.
2. User exports the buffer
3. User registers the exported buffer in the importer. This flow has
   a callback to the exporter which in turn converts the phys_page_pack
   to an SG list for the importer. This SG list is of single entry of
   size 768MB. However, the size that was passed to the importer was
   only 4MB.

The solution for this is to make sure the importer gets exposure only
to the exported size.

This will be done by fixing the SG created by the exporter to be of
the total size of the actual exported memory requested by the user.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

A previous commit deprecated the option to export from handle, leaving
the code with no support for devices with virtual memory.

This commit modifies the export API in a way that unifies the uAPI to
user address for both cases (i.e. with and without MMU support) and add
the actual support for devices with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Validate export parameters in a dedicated function instead of in the
main export flow.
This will be useful later when support to export dmabuf for devices
with virtual memory will be added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The API to the user which allows exporting DMA buffer from handle is
deprecated here. It was never used as it is relevant only for Gaudi2,
and the user stack has yet to add support for dmabuf in Gaudi2.

Looking forward, a modified API to export DMA buffer for ASICs that
supports virtual memory will be added.

Until the new API will be ready- exporting DMA buffer will not be
supported for ASICs with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This warning doesn't have real consequences, and therefore can be
printed in debug level.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Call COMMS tracepoints from within the dynamic CPU FW load.
This can help debug failures or delays in the dynamic FW load flow.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As the COMMS protocol is being used more widely in our driver,
an available debug tool for the handshake will be handy.

This commit defines tracepoints to various key points of the COMMS
protocol.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In certain scenarios, firmware might encounter a fatal event for
which a device reset is required. Hence, a proper notification
is needed for driver to be aware and initiate a reset sequence.

In secured environments the reset will be performed by firmware
without an explicit request from the driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When user context is released and hpriv_release() is called, there is a
device idle status check, to understand if user has left the device not
idle and then a reset is required.

However, if the user process is killed because of device hard reset,
the device at this point would always be not idle, because the device
engines were already forcefully halted.

Modify hpriv_release() to skip the idle check if reset is in progress.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

timestamp events that expire on the same interrupt will get the same
timestamp value
Signed-off-by: Tamir Gilad-Raz <tgiladraz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to reduce error log, we try to minimize the dumped rows
while keeping all relevant error info. In addition we completely
remove clock throttling debug logs.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

During event handling we extract interrupt cause and count it.
In case we could not find any cause we should add proper error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If the f/w reports the binning masks at the preboot stage, the driver
must align its DRAM properties according to the new information.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Removing double assignment of the hop2_pte_addr
variable in dram_default_mapping_fini().

Dead store reported by clang-analyzer.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As ASICs are evolving, we will need to update the DRAM properties at
various points because we may get different information from the f/w
at different points of the initialization.

This ASIC function is a foundation for this capability.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As hl_mmap_mem_buf_get() is called also from IOCTLs which can have a
bad handle from user, modify the print for "no match to handle" to use
dev_dbg().
Calls to this function which are not dependent on user, already have an
error print when the function fails.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The refcount of a CB buffer is initialized when user allocates a CB,
and is decreased when he destroys the CB handle.

If this refcount is increased also from kernel and user sends more than
one destroy requests for the handle, the buffer will be released/freed
and later be accessed when the refcount is put from kernel side.

To avoid it, prevent user from destroying the handle more than once.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As clock throttling due to high power consumption can happen very
frequently and there is no real reason to notify the user about it,
we skip this notification in all asics.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User should close the FD when being notified about an error, after
which a device reset takes place.

However, if the user has pending threads that wait for completions,
the device release won't be called and eventually the watchdog timeout
will expire, leading to hard reset and killing the user process.

To avoid it, abort such waiting threads right after the error
notification, and block following waiting operations.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device file is not in use when hl_device_release() is called,
and there aren't any user threads that use IOCTLs to wait for
interrupts. Therefore there is no need to release them at this point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Sometimes we need the binning info at a very early state of the
driver initialization. Therefore, support was added in preboot to
provide the binning info as part of the f/w descriptor and the driver
can now use that.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Fix programming incorrect value of address range
Signed-off-by: tal albo <talbo@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * EDID: Improved mode parsing and refactoring

 * fbdev: Cleanups

 * format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888

Driver Changes:

 * accel/ivpu: Add driver for Intel VPU accelerator

 * bridge: Support i.MX93 LDB plus DT bindings

 * exynos: Fixes

 * panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings

 * simpledrm: Support system-memory framebuffers plus DT bindings

 * ssd130x: Fix sparse warning
Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g