- 10 Feb, 2021 1 commit
-
-
Maarten Lankhorst authored
This reverts commit c10983e1. This commit is not meant for drm-misc-next-fixes, and was accidentally cherry picked over. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
- 09 Feb, 2021 27 commits
-
-
Imre Deak authored
Caching EDIDs for physical ports prevents updating the EDID if a port gets reconnected via a Connection Status Notification message, fix this. Fixes: db1a0795 ("drm/dp_mst: Handle SST-only branch device case") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com (cherry picked from commit 46809153) Signed-off-by:
-
Dan Carpenter authored
If devm_request_mem_region() fails this code currently returns success but it should return -EBUSY. Fixes: 6076a971 ("drm/virtio: implement blob resources: probe for host visible region") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwandaSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> (cherry picked from commit eb988a2e) Signed-off-by:
-
Daniel Vetter authored
Requested by Thomas. I think it justifies a new level, since I tried to make some forward progress on this last summer, and gave up (for now). This is very tricky. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch (cherry picked from commit 5823cca3) Signed-off-by:
-
Ye Bin authored
Fix follow warning: drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable] struct pci_dev *pdev; ^~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Zack Rusin authored
Dan noticed some issues with pci_release_region, this builds upon that and fixes some other lingering issues. As part of this we also can stop trying to manually free our managed device; there's no need for it, it will be cleaned up automatically for us. Fixes: 8772c0bb ("drm/vmwgfx: Cleanup pci resource allocation") Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
-
Bernard Zhao authored
remove unneeded variable: "ret". Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com (cherry picked from commit f0c5a89e) Signed-off-by:
-
Joseph Schulte authored
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of boilerplate todo in Documentation/gpu/todo.rst Signed-off-by:
Joseph Schulte <joeschulte.js@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com (cherry picked from commit 482f3ef0) Signed-off-by:
-
Thomas Zimmermann authored
The gma500 driver does not use TTM. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de (cherry picked from commit 8180cc37) Signed-off-by:
-
Thomas Zimmermann authored
Remove the CONFIG_X86 conditionals from the source code. The driver already depends on X86 in the Kconfig file. Also, no one has been trying to build it on a non-x86 platform recently, or they would have noticed that drm_ttm_cache_flush() doesn't exist. Signed-off-by:
-
Thomas Zimmermann authored
With support for the MID-related chips removed, only support for desktop chips is left in the driver. So just build the complete driver if DRM_GMA500 has been selected. Anyone who wants to enable the Poulsbo code would probably also want the Cedarview code. [Patrik: Fixed conflict due to Oaktrail not being dropped] Signed-off-by:
-
Thomas Zimmermann authored
Medfield is an outdated mobile platform with apparently no users left. Remove it from gma500. Signed-off-by:
-
Joe Perches authored
Use semicolons and braces. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/990bf6f33ccaf73ad56eb4bea8bd2c0db5e90a31.1598331148.git.joe@perches.comSigned-off-by:
-
Qinglang Miao authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new function. [0] commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: 50de2e9e ("drm/lima: enable runtime pm") Reported-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com (cherry picked from commit de499781) Signed-off-by:
-
Luben Tuikov authored
This patch does not change current behaviour. The driver's job timeout handler now returns status indicating back to the DRM layer whether the device (GPU) is no longer available, such as after it's been unplugged, or whether all is normal, i.e. current behaviour. All drivers which make use of the drm_sched_backend_ops' .timedout_job() callback have been accordingly renamed and return the would've-been default value of DRM_GPU_SCHED_STAT_NOMINAL to restart the task's timeout timer--this is the old behaviour, and is preserved by this patch. v2: Use enum as the status of a driver's job timeout callback method. v3: Return scheduler/device information, rather than task information. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Eric Anholt <eric@anholt.net> Reported-by:Luben Tuikov <luben.tuikov@amd.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Acked-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Dan Carpenter authored
The devm_memremap() function never returns NULL, it returns error pointers so the test needs to be fixed. Also we need to call pci_release_regions() to avoid a memory leak. Fixes: be4f77ac ("drm/vmwgfx: Cleanup fifo mmio handling") Signed-off-by:
-
Maxime Ripard authored
The CEC and hotplug interrupts were missing when that binding was introduced, let's add them in now that we've figured out how it works. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by:
-
Maxime Ripard authored
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by:
-
Dom Cobley authored
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by:
Dom Cobley <popcornmix@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by:
-
Maxime Ripard authored
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by:
-
Maxime Ripard authored
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by:
-
Maxime Ripard authored
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
Maxime Ripard authored
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
Dom Cobley authored
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a ("drm/vc4: add HDMI CEC support") Signed-off-by:
-
Dom Cobley authored
The commit 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") forgot one CEC register, and made a copy and paste mistake for another one. Fix those mistakes. Fixes: 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by:
-
Dom Cobley authored
The code prior to 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by:
-
Dom Cobley authored
The hdmi reset got moved to a later point in the commit 9045e91a ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a ("drm/vc4: hdmi: Add reset callback") Reviewed-by:
-
- 04 Feb, 2021 12 commits
-
-
Arnd Bergmann authored
After all users of the 'dm' warnings got hidden in an #ifdef, the compiler started warning about it being unused: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable] Add another such #ifdef. Fixes: 98ab5f35 ("drm/amd/display: Fix deadlock during gpu reset v3") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.12-2021-02-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.12-2021-02-03: amdgpu: - Display fixes and cleanups - Vangogh fixes - Fix possible race when there are timeouts on two rings - SR-IOV fixes - Add missing license - DCE 10/12 bpc fixes - Display MALL fixes - Fix SMU user preference settings persistence - Fix retry in gem allocate - Add new PCI DID - Fix for manual fan speed control on cards where it was problematic - Fix regression in pinning GTT - Misc display fixes - Misc code cleanups amdkfd: - Fix config handling - Fix regression in buffer free From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204045717.3823-1-alexander.deucher@amd.comSigned-off-by:
-
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.12 1. Decouple Mediatek DRM sub driver 2. Share mtk mutex driver for both DRM and MDP 3. Add support for SoC MT8183 Signed-off-by:
-
Yongqiang Niu authored
Add matrix_bits and coeffs_precision to ccorr private data: - matrix bits of mt8183 is 10 - matrix bits of mt8192 is 11 Signed-off-by:
Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Yongqiang Niu authored
Fix setting to follow hardware datasheet. The original error setting affects mt8192 display. Signed-off-by:
-
Yongqiang Niu authored
ccorr ctm matrix bits will be different in mt8192. Signed-off-by:
-
Yongqiang Niu authored
Enable dither function to improve the display quality. Signed-off-by:
-
Yongqiang Niu authored
Enable OVL_LAYER_SMI_ID_EN for multi-layer usecase, without this patch, ovl will hang up when more than 1 layer enabled. Signed-off-by:
-
Yongqiang Niu authored
1. Add ovl private data 2. Add rdma private data 3. Add gamma privte data 4. Add main and external path module for crtc create Signed-off-by:
-
Yongqiang Niu authored
Not all SoC has dither function in gamma module. Add private data to control this function setting. Signed-off-by:
-
Yongqiang Niu authored
mt8183 gamma module will different with mt8173, so separate gamma for adding private data. Signed-off-by:
-
Hsin-Yi Wang authored
Current implementation of mtk_dither_set() cast dev data to struct mtk_ddp_comp_dev. But other devices with different dev data would also call this function. Separate necessary parameters out so other device components (dither, gamma) can call this function. Signed-off-by:
-
