Firmware required by bna is stored in appropriate files as sequence
of LE32 integers. After loading by request_firmware() they need to be
byte-swapped on big-endian arches. Without this conversion the NIC
is unusable on big-endian machines.

Cc: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
This just has a single docbook build fix. In my confusion
I'd already sent the same fix for -next, but Ben Hutchings
noted it's necessary in 4.1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

br_multicast_query_expired() querier argument is a pointer to
a struct bridge_mcast_querier :

struct bridge_mcast_querier {
        struct br_ip addr;
        struct net_bridge_port __rcu    *port;
};

Intent of the code was to clear port field, not the pointer to querier.

Fixes: 2cd41431 ("bridge: memorize and export selected IGMP/MLD querier port")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
Cc: Linus Lüssing <linus.luessing@web.de>
Cc: Steinar H. Gunderson <sesse@samfundet.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2015-05-28

1) Fix a race in xfrm_state_lookup_byspi, we need to take
   the refcount before we release xfrm_state_lock.
   From Li RongQing.

2) Fix IV generation on ESN state. We used just the
   low order sequence numbers for IV generation on
   ESN, as a result the IV can repeat on the same
   state. Fix this by using the  high order sequence
   number bits too and make sure to always initialize
   the high order bits with zero. These patches are
   serious stable candidates. Fixes from Herbert Xu.

3) Fix the skb->mark handling on vti. We don't
   reset skb->mark in skb_scrub_packet anymore,
   so vti must care to restore the original
   value back after it was used to lookup the
   vti policy and state. Fixes from Alexander Duyck.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I don't have enough time to look after via-rhine anymore.
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

A couple of enums in mac80211.h became structures recently, but the
comments didn't follow suit, leading to errors like:

  Error(.//include/net/mac80211.h:367): Cannot parse enum!
  Documentation/DocBook/Makefile:93: recipe for target 'Documentation/DocBook/80211.xml' failed
  make[1]: *** [Documentation/DocBook/80211.xml] Error 1
  Makefile:1361: recipe for target 'mandocs' failed
  make: *** [mandocs] Error 2

Fix the comments comments accordingly.  Added a couple of other small
comment fixes while I was there to silence other recently-added docbook
warnings.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The vti6_rcv_cb and vti_rcv_cb calls were leaving the skb->mark modified
after completing the function.  This resulted in the original skb->mark
value being lost.  Since we only need skb->mark to be set for
xfrm_policy_check we can pull the assignment into the rcv_cb calls and then
just restore the original mark after xfrm_policy_check has been completed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

This change makes it so that if a tunnel is defined we just use the mark
from the tunnel instead of the mark from the skb header.  By doing this we
can avoid the need to set skb->mark inside of the tunnel receive functions.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Instead of modifying skb->mark we can simply modify the flowi_mark that is
generated as a result of the xfrm_decode_session.  By doing this we don't
need to actually touch the skb->mark and it can be preserved as it passes
out through the tunnel.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Pull cifs fixes from Steve French:
 "Back from SambaXP - now have 8 small CIFS bug fixes to merge"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix race condition on RFC1002_NEGATIVE_SESSION_RESPONSE
  Fix to convert SURROGATE PAIR
  cifs: potential missing check for posix_lock_file_wait
  Fix to check Unique id and FileType when client refer file directly.
  CIFS: remove an unneeded NULL check
  [cifs] fix null pointer check
  Fix that several functions handle incorrect value of mapchars
  cifs: Don't replace dentries for dfs mounts

Pull networking fixes from David Miller:

 1) Don't use MMIO on certain iwlwifi devices otherwise we get a
    firmware crash.

 2) Don't corrupt the GRO lists of mac80211 contexts by doing sends via
    timer interrupt, from Johannes Berg.

 3) SKB tailroom is miscalculated in AP_VLAN crypto code, from Michal
    Kazior.

 4) Fix fw_status memory leak in iwlwifi, from Haim Dreyfuss.

 5) Fix use after free in iwl_mvm_d0i3_enable_tx(), from Eliad Peller.

 6) JIT'ing of large BPF programs is broken on x86, from Alexei
    Starovoitov.

 7) EMAC driver ethtool register dump size is miscalculated, from Ivan
    Mikhaylov.

 8) Fix PHY initial link mode when autonegotiation is disabled in
    amd-xgbe, from Tom Lendacky.

 9) Fix NULL deref on SOCK_DEAD socket in AF_UNIX and CAIF protocols,
    from Mark Salyzyn.

10) credit_bytes not initialized properly in xen-netback, from Ross
   Lagerwall.

11) Fallback from MSI-X to INTx interrupts not handled properly in mlx4
    driver, fix from Benjamin Poirier.

12) Perform ->attach() after binding dev->qdisc in packet scheduler,
    otherwise we can crash.  From Cong WANG.

13) Don't clobber data in sctp_v4_map_v6().  From Jason Gunthorpe.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  sctp: Fix mangled IPv4 addresses on a IPv6 listening socket
  net_sched: invoke ->attach() after setting dev->qdisc
  xen-netfront: properly destroy queues when removing device
  mlx4_core: Fix fallback from MSI-X to INTx
  xen/netback: Properly initialize credit_bytes
  net: netxen: correct sysfs bin attribute return code
  tools: bpf_jit_disasm: fix segfault on disabled debugging log output
  unix/caif: sk_socket can disappear when state is unlocked
  amd-xgbe-phy: Fix initial mode when autoneg is disabled
  net: dp83640: fix improper double spin locking.
  net: dp83640: reinforce locking rules.
  net: dp83640: fix broken calibration routine.
  net: stmmac: create one debugfs dir per net-device
  net/ibm/emac: fix size of emac dump memory areas
  x86: bpf_jit: fix compilation of large bpf programs
  net: phy: bcm7xxx: Fix 7425 PHY ID and flags
  iwlwifi: mvm: avoid use-after-free on iwl_mvm_d0i3_enable_tx()
  iwlwifi: mvm: clean net-detect info if device was reset during suspend
  iwlwifi: mvm: take the UCODE_DOWN reference when resuming
  iwlwifi: mvm: BT Coex - duplicate the command if sent ASYNC
  ...

sctp_v4_map_v6 was subtly writing and reading from members
of a union in a way the clobbered data it needed to read before
it read it.

Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning
that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the
result.

Reorder things to guarantee correct behaviour no matter what the
union layout is.

This impacts user space clients that open an IPv6 SCTP socket and
receive IPv4 connections. Prior to 299ee user space would see a
sockaddr with AF_INET and a correct address, after 299ee the sockaddr
is AF_INET6, but the address is wrong.

Fixes: 299ee123 (sctp: Fixup v4mapped behaviour to comply with Sock API)
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For mq qdisc, we add per tx queue qdisc to root qdisc
for display purpose, however, that happens too early,
before the new dev->qdisc is finally set, this causes
q->list points to an old root qdisc which is going to be
freed right before assigning with a new one.

Fix this by moving ->attach() after setting dev->qdisc.

For the record, this fixes the following crash:

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
 list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b
 CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756
  ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20
  ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000
 Call Trace:
  [<ffffffff81a44e7f>] dump_stack+0x4c/0x65
  [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6
  [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98
  [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a
  [<ffffffff814e725b>] __list_del_entry+0x5a/0x98
  [<ffffffff814e72a7>] list_del+0xe/0x2d
  [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20
  [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6
  [<ffffffff81822676>] qdisc_graft+0x11d/0x243
  [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4
  [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226
  [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff818544b2>] netlink_unicast+0xcb/0x150
  [<ffffffff81161db9>] ? might_fault+0x59/0xa9
  [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c
  [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d
  [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e
  [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a
  [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37
  [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72
  [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32
  [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f
  [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76
  [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199
  [<ffffffff811b14d5>] ? __fget_light+0x50/0x78
  [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60
  [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f
 ---[ end trace ef29d3fb28e97ae7 ]---

For long term, we probably need to clean up the qdisc_graft() code
in case it hides other bugs like this.

Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xennet_remove() freed the queues before freeing the netdevice which
results in a use-after-free when free_netdev() tries to delete the
napi instances that have already been freed.

Fix this by fully destroy the queues (which includes deleting the napi
instances) before freeing the netdevice.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 fixes from Ingo Molnar:
 "This tree includes:

   - a fix that disables the compacted FPU XSAVE format by disabling
     XSAVES support: the fixes are too complex and the breakages
     ABI-affecting, so we want this to be quirked off in a robust way
     and backported, to make sure no broken kernel is exposed to the new
     hardware (which exposure is still very limited).

   - an MCE printk message fix

   - a documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Disable XSAVES* support for now
  x86/Documentation: Update the contact email for L3 cache index disable functionality
  x86/mce: Fix MCE severity messages

Pull alpha updates from Matt Turner:
 "Please pull a small collection of patches that I've been neglecting.

  Probably most importantly are the patches that wire up the new
  syscalls needed by udev and the fix to the bootp{,z}file targets"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: kernel: osf_sys: Set 'kts.tv_nsec' only when 'tv' has effect
  alpha: Wire up all missing implemented syscalls
  alpha: Fix bootpfile and bootpzfile make targets
  alpha: copy_thread(): rename 'arg' argument to 'kthread_arg'
  alpha: delete non-required instances of <linux/init.h>
  alpha: don't use module_init for non-modular core code
  smp, alpha: kill SMP single function call interrupt
  alpha: Remove #include <uapi/asm/types.h> from <asm/types.h>
  alpha: clean up unnecessary MSI/MSI-X capability find

The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to
fail with -EBUSY. It is also necessary to avoid the reset since the device
is not fully reinitialized before calling mlx4_start_hca() a second time.

Note that this will also affect mlx4_test_interrupts(), the only other user
of MLX4_CMD_NOP.

Fixes: f5aef5aa ("net/mlx4_core: Activate reset flow upon fatal command cases")
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This bug has been there since day 1; addresses in the top guest physical
page weren't considered valid.  You could map that page (the check in
check_gpte() is correct), but if a guest tried to put a pagetable there
we'd check that address manually when walking it, and kill the guest.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue
struct") introduced a regression when moving queue-specific data into
the queue struct by failing to set the credit_bytes field. This
prevented bandwidth limiting from working. Initialize the field as it
was done before multiqueue support was added.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull two overlayfs fixes from Miklos Szeredi:
 "Overlayfs rmdir() failed to check for emptiness in one case; this was
  introduced in 4.0.  The other bug was there since day one: failure to
  mount if upper fs is full, which bit some OpenWRT folks"

* 'overlayfs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: mount read-only if workdir can't be created
  ovl: don't remove non-empty opaque directory

Pull an MFD fix from Lee Jones:
 "One simple fix to repair broken regulator probe() in DA9052"

* tag 'mfd-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: da9052: Fix broken regulator probe

Pull backlight fix from Lee Jones:
 "One simple fix to correctly handle -EPROBE_DEFER"

* tag 'backlight-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm: Handle EPROBE_DEFER while requesting the PWM

Pull crypto fix from Herbert Xu:
 "This disables the newly (4.1) added user-space AEAD interface so that
  we can fix issues in the underlying kernel AEAD interface.  Once the
  new kernel AEAD interface is ready we can then reenable the user-space
  AEAD interface"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - Disable AEAD user-space for now

Fix broken probe of da9052 regulators, which since commit b3f6c73d
("mfd: da9052-core: Fix platform-device id collision") use a
non-deterministic platform-device id to retrieve static regulator
information. Fortunately, adequate error handling was in place so probe
would simply fail with an error message.

Update the mfd-cell ids to be zero-based and use those to identify the
cells when probing the regulator devices.

Fixes: b3f6c73d ("mfd: da9052-core: Fix platform-device id collision")
Cc: stable <stable@vger.kernel.org>	# v3.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

If read() syscall requests unexpected number of bytes from "dimm" binary
attribute file, return EINVAL instead of EPERM.

At the same time pin down sysfs file size to the fixed
sizeof(struct netxen_dimm_cfg), which allows to exploit some missing
sanity checks from kernfs (file boundary checks vs offset etc.)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent debugging, I noticed that bpf_jit_disasm segfaults when
there's no debugging output from the JIT compiler to the kernel log.

Reason is that when regexec(3) doesn't match on anything, start/end
offsets are not being filled out and contain some uninitialized garbage
from stack. Thus, we need zero out offsets first.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

got a rare NULL pointer dereference in clear_bit
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>

When the ethtool command is used to set the speed of the device while
the device is down, the check to set the initial mode may fail when
the device is brought up, causing failure to bring the device up.

Update the code to set the initial mode based on the desired speed if
auto-negotiation is disabled.

This patch fixes a bug introduced by:
d9663c8c ("amd-xgbe-phy: Use phydev advertising field vs supported")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
We have three more fixes:
 * AP_VLAN tailroom calculation fix, the bug leads to warnings
   along with dropped packets
 * NAPI context issue, calling napi_gro_receive() from a timer
   (obviously) can lead to crashes
 * remain-on-channel combining leads to dropped requests and not
   being able to finish certain operations, so remove it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The related warning:

    CC      init/do_mounts.o
  arch/alpha/kernel/osf_sys.c: In function 'SyS_osf_settimeofday':
  arch/alpha/kernel/osf_sys.c:1028:14: warning: 'kts.tv_nsec' may be used uninitialized in this function [-Wmaybe-uninitialized]
    kts.tv_nsec *= 1000;
                ^
  arch/alpha/kernel/osf_sys.c:1016:18: note: 'kts' was declared here
    struct timespec kts;
                    ^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

And still left the missing unimplemented syscalls as warnings. The
related warnings for missing implemented syscalls:

    CALL    scripts/checksyscalls.sh
  <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp]
  <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp]
  <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Fix the bootpfile and bootpzfile make targets to creat BOOTP images.
Both targets were broken due to some missing defines to re-map ELF
constants. In addition the old code used the generic vsprintf function
of the kernel which we now replace by a simple and much smaller
implementation for the bootloader.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The 'arg' argument to copy_thread() is only ever used when forking a new
kernel thread. Hence, rename it to 'kthread_arg' for clarity (and consistency
with do_fork() and other arch-specific implementations of copy_thread()).
Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Acked-by: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The srm console is always built in.  It will never be modular,
so using module_init as an alias for __initcall is rather
misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Direct use of __initcall is discouraged, vs prioritized ones.
Use of device_initcall is consistent with what __initcall
maps onto, and hence does not change the init order, making the
impact of this change zero.   Should someone with real hardware
for boot testing want to change it later to arch_initcall or
console_initcall, they can do that at a later date.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Commit 9a46ad6d "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one interrupt
is needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Everything in arch/alpha/include/uapi/asm/types.h is protected by
"#ifndef __KERNEL__", so it's unused for kernelspace.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX).
Access to PCIe device config space again will consume more time.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: Phil Carmody <pc+lkml@asdf.org>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

The newly added AEAD user-space isn't quite ready for prime time
just yet.  In particular it is conflicting with the AEAD single
SG list interface change so this patch disables it now.

Once the SG list stuff is completely done we can then renable
this interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When trying to request the PWM device with devm_pwm_get(), the EPROBE_DEFER
flag is not handled properly. It can lead to the PWM not being found.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>