- 02 Nov, 2021 4 commits
-
-
Stephen Boyd authored
Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next * clk-composite-determine-fix: clk: composite: Use rate_ops.determine_rate when also a mux is available clk: composite: Also consider .determine_rate for rate + mux composites * clk-allwinner: clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource() dt-bindings: clocks: Fix typo in the H6 compatible clk: sunxi-ng: Use a separate lock for each CCU instance clk: sunxi-ng: Prevent unbinding CCUs via sysfs clk: sunxi-ng: Unregister clocks/resets when unbinding clk: sunxi-ng: Add machine dependency to A83T CCU clk: sunxi-ng: mux: Remove unused 'reg' field * clk-amlogic: clk: meson: meson8b: Make the video clock trees mutable clk: meson: meson8b: Initialize the HDMI PLL registers clk: meson: meson8b: Add the HDMI PLL M/N parameters clk: meson: meson8b: Add the vid_pll_lvds_en gate clock clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel clk: meson: meson8b: Export the video clocks * clk-samsung: clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing clk: samsung: add support for CPU clocks clk: samsung: Introduce Exynos850 clock driver dt-bindings: clock: Document Exynos850 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos850 CMU clk: samsung: clk-pll: Implement pll0831x PLL type clk: samsung: clk-pll: Implement pll0822x PLL type clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource() clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource() clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource() clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource() -
Stephen Boyd authored
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get()
-
Stephen Boyd authored
- Clock power management for new SAMA7G5 SoC - Updates to the master clock driver and sam9x60-pll to be able to use cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while changing the frequency via DVFS - Power management refinement with the use of save_context()/restore_context() on each clock driver to specify their use in case of Backup mode only * clk-leak: clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths * clk-rockchip: clk: rockchip: use module_platform_driver_probe clk: rockchip: rk3399: expose PCLK_COREDBG_{B,L} clk: rockchip: rk3399: make CPU clocks critical * clk-renesas: clk: renesas: r8a779[56]x: Add MLP clocks clk: renesas: r9a07g044: Add SDHI clock and reset entries clk: renesas: rzg2l: Add SDHI clk mux support clk: renesas: r8a779a0: Add RPC support clk: renesas: cpg-lib: Move RPC clock registration to the library clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller clk: renesas: r8a779a0: Add Z0 and Z1 clock support clk: renesas: r9a07g044: Add GbEthernet clock/reset clk: renesas: rzg2l: Add support to handle coupled clocks clk: renesas: r9a07g044: Add ethernet clock sources clk: renesas: rzg2l: Add support to handle MUX clocks clk: renesas: r8a779a0: Add TPU clock clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical * clk-at91: clk: at91: sama7g5: set low limit for mck0 at 32KHz clk: at91: sama7g5: remove prescaler part of master clock clk: at91: clk-master: add notifier for divider clk: at91: clk-sam9x60-pll: add notifier for div part of PLL clk: at91: clk-master: fix prescaler logic clk: at91: clk-master: mask mckr against layout->mask clk: at91: clk-master: check if div or pres is zero clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL clk: at91: pmc: add sama7g5 to the list of available pmcs clk: at91: clk-master: improve readability by using local variables clk: at91: clk-master: add register definition for sama7g5's master clock clk: at91: sama7g5: add securam's peripheral clock clk: at91: pmc: execute suspend/resume only for backup mode clk: at91: re-factor clocks suspend/resume clk: at91: check pmc node status before registering syscore ops -
Stephen Boyd authored
- Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Make Mediatek clk drivers tristate * clk-qcom: (44 commits) clk: qcom: gdsc: enable optional power domain support clk: qcom: videocc-sm8250: use runtime PM for the clock controller clk: qcom: dispcc-sm8250: use runtime PM for the clock controller dt-bindings: clock: qcom,videocc: add mmcx power domain dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain clk: qcom: gcc-sc7280: Drop unused array clk: qcom: camcc: Add camera clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280 clk: qcom: Add lpass clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents clk: qcom: gcc-msm8994: Add proper msm8992 support clk: qcom: gcc-msm8994: Add modem reset clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE clk: qcom: gcc-msm8994: Add missing clocks clk: qcom: gcc-msm8994: Add missing NoC clocks clk: qcom: gcc-msm8994: Fix up SPI QUP clocks ... * clk-mtk: (28 commits) clk: mediatek: Export clk_ops structures to modules clk: mediatek: support COMMON_CLK_MT6779 module build clk: mediatek: support COMMON_CLK_MEDIATEK module build clk: composite: export clk_register_composite clk: mediatek: Add MT8195 apusys clock support clk: mediatek: Add MT8195 imp i2c wrapper clock support clk: mediatek: Add MT8195 wpesys clock support clk: mediatek: Add MT8195 vppsys1 clock support clk: mediatek: Add MT8195 vppsys0 clock support clk: mediatek: Add MT8195 vencsys clock support clk: mediatek: Add MT8195 vdosys1 clock support clk: mediatek: Add MT8195 vdosys0 clock support clk: mediatek: Add MT8195 vdecsys clock support clk: mediatek: Add MT8195 scp adsp clock support clk: mediatek: Add MT8195 mfgcfg clock support clk: mediatek: Add MT8195 ipesys clock support clk: mediatek: Add MT8195 imgsys clock support clk: mediatek: Add MT8195 ccusys clock support clk: mediatek: Add MT8195 camsys clock support clk: mediatek: Add MT8195 infrastructure clock support ... * clk-versatile: clk: versatile: hide clock drivers from non-ARM users clk: versatile: Rename ICST to CLK_ICST clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for register address dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address * clk-doc: dt-bindings: clk: fixed-mmio-clock: Convert to YAML
-
- 27 Oct, 2021 17 commits
-
-
Claudiu Beznea authored
In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get() will return the cached rate. Thus, use clk_core_get_rate_recalc() which takes proper action when clock flags contains CLK_GET_RATE_NOCACHE. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.comAcked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> [sboyd@kernel.org: Grab prepare lock around operation] Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Claudiu Beznea authored
MCK0 could go as low as 32KHz. Set this limit. Signed-off-by:
-
Claudiu Beznea authored
On SAMA7G5 the prescaler part of master clock has been implemented as a changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has been discovered that in some conditions the PMC_SR.MCKRDY is not rising but the rate it provides it's stable. The workaround is to add a timeout when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler will be removed from Linux clock tree as all the frequencies for CPU could be obtained from PLL and also there will be less overhead when changing frequency via DVFS. Signed-off-by:
-
Claudiu Beznea authored
SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same parent with cpuck as seen in the following clock tree: +----------> cpuck | FRAC PLL ---> DIV PLL -+-> DIV ---> mck0 mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking while changing FRAC PLL or DIV PLL the commit implements a notifier for mck0 which applies a safe divider to register (maximum value of the divider which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE events. Signed-off-by: -
Claudiu Beznea authored
SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: one fractional part and one divider. On SAMA7G5 the CPU PLL could be changed at run-time to implement DVFS. The hardware clock tree on SAMA7G5 for CPU PLL is as follows: +---- div1 ----------------> cpuck | FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 The div1 block is not implemented in Linux; on prescaler block it has been discovered a bug on some scenarios and will be removed from Linux in next commits. Thus, the final clock tree that will be used in Linux will be as follows: +-----------> cpuck | FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 It has been proposed in [1] to not introduce a new CPUFreq driver but to overload the proper clock drivers with proper operation such that cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement clock notifiers which applies safe dividers before FRAC PLL is changed. The current commit treats only the DIV PLL by adding a notifier that sets a safe divider on PRE_RATE_CHANGE events. The safe divider is provided by initialization clock code (sama7g5.c). The div0 is treated in next commits (to keep the changes as clean as possible). [1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/Signed-off-by: -
Claudiu Beznea authored
When prescaler value read from register is MASTER_PRES_MAX it means that the input clock will be divided by 3. Fix the code to reflect this. Fixes: 7a110b91 ("clk: at91: clk-master: re-factor master clock") Signed-off-by:
-
Claudiu Beznea authored
Mask values read/written from/to MCKR against layout->mask as this mask may be different b/w PMC versions. Signed-off-by:
-
Claudiu Beznea authored
Check if div or pres is zero before using it as argument for ffs(). In case div is zero ffs() will return 0 and thus substracting from zero will lead to invalid values to be setup in registers. Fixes: 7a110b91 ("clk: at91: clk-master: re-factor master clock") Fixes: 75c88143 ("clk: at91: clk-master: add master clock support for SAMA7G5") Signed-off-by:
-
Claudiu Beznea authored
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate computed in sam9x60_frac_pll_recalc_rate() and the one computed in sam9x60_frac_pll_compute_mul_frac(). Fixes: 43b1bb4a ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Signed-off-by:
-
Claudiu Beznea authored
Add SAMA7G5 to the list of available PMCs such that the suspend/resume code for clocks to be used on backup mode. Signed-off-by:
-
Claudiu Beznea authored
Improve readability in clk_sama7g5_master_set() by using local variables. Suggested-by:
-
Claudiu Beznea authored
SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the register at offset 0x30 (relative to PMC). In the last/first phase of suspend/resume procedure (which is architecture specific) the parent of master clocks are changed (via assembly code) for more power saving (see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable and at91_mckx_ps_restore). Thus the macros corresponding to register at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S. commit ec03f18c ("clk: at91: add register definition for sama7g5's master clock") introduced the proper macros but didn't adapted the clk-master.c as well. Thus, this commit adapt the clk-master.c to use the macros introduced in commit ec03f18c ("clk: at91: add register definition for sama7g5's master clock"). Signed-off-by:
-
Claudiu Beznea authored
Add SECURAM's peripheral clock. Signed-off-by:
-
Claudiu Beznea authored
Before going to backup mode architecture specific PM code sets the first word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()). Thus take this into account when suspending/resuming clocks. This will avoid executing unnecessary instructions when suspending to non backup modes. Signed-off-by:
-
Claudiu Beznea authored
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured. The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver. Signed-off-by:
-
Linus Walleij authored
The Ux500 PRCC (peripheral reset and clock controller) can also control reset of the IP blocks, not just clocks. As the PRCC is probed as a clock controller and we have other platforms implementing combined clock and reset controllers, follow this pattern and implement the PRCC rest controller as part of the clock driver. The reset controller needs to be selected from the machine as Ux500 has traditionally selected its mandatory subsystem prerequisites from there. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.orgAcked-by:
Ulf Hansson <ulf.hansson@linaro.org> [sboyd@kernel.org: Dropped allocation error message] Signed-off-by:
-
Linus Walleij authored
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
-
- 26 Oct, 2021 3 commits
-
-
Stephen Boyd authored
Merge tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung Pull Samsung clk driver updates from Sylwester Nawrocki: - Initial clock driver for the Exynos850 SoC - Refactoring of the CPU clock code and conversion of Exynos5433 CPU clock driver to the platform driver - A few conversions to devm_platform_ioremap_resource() - Updates of the Samsung Kconfig help text * tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing clk: samsung: add support for CPU clocks clk: samsung: Introduce Exynos850 clock driver dt-bindings: clock: Document Exynos850 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos850 CMU clk: samsung: clk-pll: Implement pll0831x PLL type clk: samsung: clk-pll: Implement pll0822x PLL type clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource() clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource() clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource() clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull Amlogic clock driver updates from Jerome Brunet: - Update video path realted clocks for meson8 * tag 'clk-meson-v5.16-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: Make the video clock trees mutable clk: meson: meson8b: Initialize the HDMI PLL registers clk: meson: meson8b: Add the HDMI PLL M/N parameters clk: meson: meson8b: Add the vid_pll_lvds_en gate clock clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel clk: meson: meson8b: Export the video clocks
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-5.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clk driver updates from Maxime Ripard: Our usual PR for the Allwinner SoCs, this time improving the module support and converting to more helpers. * tag 'sunxi-clk-for-5.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource() dt-bindings: clocks: Fix typo in the H6 compatible clk: sunxi-ng: Use a separate lock for each CCU instance clk: sunxi-ng: Prevent unbinding CCUs via sysfs clk: sunxi-ng: Unregister clocks/resets when unbinding clk: sunxi-ng: Add machine dependency to A83T CCU clk: sunxi-ng: mux: Remove unused 'reg' field
-
- 18 Oct, 2021 3 commits
-
-
Martin Blumenstingl authored
Update clk_composite_determine_rate() to use rate_ops.determine_rate when available in combination with a mux. So far clk_divider_ops provide both, .round_rate and .determine_rate. Removing the former would make clk-composite fail silently for example on Rockchip platforms (which heavily use composite clocks). Add support for using rate_ops.determine_rate when either rate_ops.round_rate is not available or both (.round_rate and .determine_rate) are provided. Suggested-by:
Alex Bee <knaerzche@gmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211016105022.303413-3-martin.blumenstingl@googlemail.comTested-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Martin Blumenstingl authored
Commit 69a00fb3 ("clk: divider: Implement and wire up .determine_rate by default") switches clk_divider_ops to implement .determine_rate by default. This breaks composite clocks with multiple parents because clk-composite.c does not use the special handling for mux + divider combinations anymore (that was restricted to rate clocks which only implement .round_rate, but not .determine_rate). Alex reports: This breaks lot of clocks for Rockchip which intensively uses composites, i.e. those clocks will always stay at the initial parent, which in some cases is the XTAL clock and I strongly guess it is the same for other platforms, which use composite clocks having more than one parent (e.g. mediatek, ti ...) Example (RK3399) clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot. It will always stay at this parent, even if the mmc driver sets a rate of 200 MHz (fails, as the nature of things), which should switch it to any of its possible parent PLLs defined in mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c) - which never happens. Restore the original behavior by changing the priority of the conditions inside clk-composite.c. Now the special rate + mux case (with rate_ops having a .round_rate - which is still the case for the default clk_divider_ops) is preferred over rate_ops which have .determine_rate defined (and not further considering the mux). Fixes: 69a00fb3 ("clk: divider: Implement and wire up .determine_rate by default") Reported-by:
-
Krzysztof Kozlowski authored
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20210924133624.112593-1-krzysztof.kozlowski@canonical.comSigned-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com>
-
- 15 Oct, 2021 13 commits
-
-
Stephen Boyd authored
Merge tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add SPI Multi I/O Bus and SDHI clocks and resets on RZ/G2L - Add SPI Multi I/O Bus (RPC) clocks on R-Car V3U - Add MediaLB clocks on R-Car H3, M3-W/W+, and M3-N * tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a779[56]x: Add MLP clocks clk: renesas: r9a07g044: Add SDHI clock and reset entries clk: renesas: rzg2l: Add SDHI clk mux support clk: renesas: r8a779a0: Add RPC support clk: renesas: cpg-lib: Move RPC clock registration to the library clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller
-
Will McVicker authored
Use the samsung common clk driver to initialize the apollo and atlas clocks. This removes their custom init functions and uses the samsung_cmu_register_one() instead. Signed-off-by:
Will McVicker <willmcvicker@google.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
-
Will McVicker authored
Adds 'struct samsung_cpu_clock' and corresponding CPU clock registration function to the samsung common clk driver. This allows samsung clock drivers to register their CPU clocks with the samsung_cmu_register_one() API. Currently the exynos5433 apollo and atlas clks have their own custom init functions to handle registering their CPU clocks. With this patch we can drop their custom CLK_OF_DECLARE functions and directly call samsung_cmu_register_one(). Signed-off-by:
-
Sam Protsenko authored
This is the initial implementation adding only basic clocks like UART, MMC, I2C and corresponding parent clocks. Design is influenced by Exynos5433 clock driver. Bus clock is enabled by default (in probe function) for all CMUs except CMU_TOP, the reasoning is as follows. By default if bus clock has no users its "enable count" value is 0. It might be actually running if it's already enabled in bootloader, but then in some cases it can be disabled by mistake. For example, such case was observed when dw_mci_probe() enabled the bus clock, then failed to do something and disabled that bus clock on error path. After that, even the attempt to read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock ended up being disabled and it wasn't possible to access CMU registers anymore. To avoid such cases, CMU driver must increment the ref count for that bus clock by running clk_prepare_enable(). There is already existing '.clk_name' field in struct samsung_cmu_info, exactly for that reason. It was added in commit 523d3de4 ("clk: samsung: exynos5433: Add support for runtime PM"), with next mentioning in commit message: > Also for each CMU there is one special parent clock, which has to be > enabled all the time when any access to CMU registers is being done. But that clock is actually only enabled in Exynos5433 clock driver right now. So the same code is added to exynos850_cmu_probe() function, As was described above, it might be helpful not only for PM reasons, but also to prevent possible erroneous clock gating on error paths. Another way to workaround that issue would be to use CLOCK_IS_CRITICAL flag for corresponding gate clocks. But that might be not very good design decision, as we might still want to disable that bus clock, e.g. on PM suspend. Signed-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by:
-
Sam Protsenko authored
Provide dt-schema documentation for Exynos850 SoC clock controller. Signed-off-by:
-
Andrey Gusakov authored
Add clocks for MLP modules on Renesas R-Car H3 and M3-W/N SoCs. Signed-off-by:
Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20210929213431.5275-1-nikita.yoush@cogentembedded.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Jean Delvare authored
Commit 419b3ab6 ("clk: versatile: remove dependency on ARCH_*") made the whole menu of ARM reference clock drivers visible on all architectures. I can't see how this is an improvement for non-ARM users. Unless build-testing, there is no point on presenting ARM-only clock drivers on other architectures. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Peter Collingbourne <pcc@google.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210901180953.5bd2a994@endymionReviewed-by:
-
Jean Delvare authored
For consistency, prefix the ICST config option with CLK as all other clock source drivers have. Signed-off-by:
-
Dmitry Baryshkov authored
On sm8250 dispcc and videocc registers are powered up by the MMCX power domain. Currently we use a regulator to enable this domain on demand, however this has some consequences, as genpd code is not reentrant. Make gdsc code also use pm_runtime calls to ensure that registers are accessible during the gdsc_enable/gdsc_disable operations. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829154757.784699-6-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
On sm8250 dispcc and videocc registers are powered up by the MMCX power domain. Use runtime PM calls to make sure that required power domain is powered on while we access clock controller's registers. Signed-off-by:
-
Dmitry Baryshkov authored
On sm8250 dispcc and videocc registers are powered up by the MMCX power domain. Use runtime PM calls to make sure that required power domain is powered on while we access clock controller's registers. Signed-off-by:
-
Dmitry Baryshkov authored
On sm8250 videocc requires MMCX power domain to be powered up before clock controller's registers become available. For now sm8250 was using external regulator driven by the power domain to describe this relationship. Switch into specifying power-domain and required opp-state directly. Signed-off-by:
-
Dmitry Baryshkov authored
On sm8250 dispcc requires MMCX power domain to be powered up before clock controller's registers become available. For now sm8250 was using external regulator driven by the power domain to describe this relationship. Switch into specifying power-domain and required opp-state directly. Signed-off-by:
-
