1. 22 May, 2009 2 commits
  2. 16 May, 2009 3 commits
  3. 30 Apr, 2009 1 commit
  4. 23 Apr, 2009 3 commits
  5. 22 Apr, 2009 4 commits
    • Bartlomiej Zolnierkiewicz's avatar
      mediabay: fix build for CONFIG_BLOCK=n · 83cff839
      Bartlomiej Zolnierkiewicz authored
      On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
      > Observed the following build error:
      > ---
      > CC      drivers/macintosh/mediabay.o
      > In file included from drivers/macintosh/mediabay.c:21:
      > include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
      > type
      > make[2]: *** [drivers/macintosh/mediabay.o] Error 1
      > make[1]: *** [drivers/macintosh] Error 2
      > make: *** [drivers] Error 2
      > ---
      
      mediabay shouldn't include <linux/ide.h> unconditionally so
      remove the superfluous include from mediabay.c (<asm/mediabay.h>
      will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).
      Reported-by: default avatarSubrata Modak <subrata@linux.vnet.ibm.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      83cff839
    • Bruno Prémont's avatar
      ide: Stop disks on reboot for laptop which cuts power · b0aedb04
      Bruno Prémont authored
      My laptop (Acer Travelmate 660) always cuts the power when rebooting
      which causes the disk to emergency-park it's head.
      
      Add a dmi check to stop disk as for shutdown on this laptop.
      Signed-off-by: default avatarBruno Prémont <bonbons@linux-vserver.org>
      Cc: Jeff Garzik <jeff@garzik.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      b0aedb04
    • Helge Deller's avatar
      ide-cd: fix kernel crash on hppa regression · a1f9a89c
      Helge Deller authored
      With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture 
      due to ide-cd when udev creates the device nodes at startup:
      
      Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024)
      IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0
       IIR: 4ab30048    ISR: 00000000  IOR: 00000024
       CPU:        0   CR30: 8ed34000 CR31: ffff55ff
       ORIG_R28: 00000000
       IAOQ[0]: ide_complete_rq+0x2c/0x70
       IAOQ[1]: ide_complete_rq+0x30/0x70
       RP(r2): cdrom_newpc_intr+0x178/0x46c
      Backtrace:
       [<1035c608>] cdrom_newpc_intr+0x178/0x46c
       [<1034c494>] ide_intr+0x1b0/0x214
       [<1016d284>] handle_IRQ_event+0x70/0x150
       [<1016d4b0>] __do_IRQ+0x14c/0x1cc
       [<102f7864>] superio_interrupt+0x88/0xbc
       [<1016d284>] handle_IRQ_event+0x70/0x150
       [<1016d4b0>] __do_IRQ+0x14c/0x1cc
       [<10112efc>] do_cpu_irq_mask+0x9c/0xd0
       [<10116068>] intr_return+0x0/0x4
      
      This crash seems to happen due to an uninitialized variable "rc".
      The compiler even warns about that:
        CC      drivers/ide/ide-cd.o                                                         
      /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
      /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function
      
      After applying the trivial patch below, which just initializes 
      the variable to zero, the kernel doesn't crash any longer:
      
      Starting the hotplug events dispatcher: udevd.
      Synthesizing the initial hotplug events...
      hda: command error: status=0x51 { DriveReady SeekComplete Error }
      hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
      ide: failed opcode was: unknown
      done.
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      Acked-by: default avatarBorislav Petkov <petkovbb@gmail.com>
      Cc: Linus <torvalds@linux-foundation.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      a1f9a89c
    • David Brownell's avatar
      palm_bk3710: UDMA performance fix · db2f38c2
      David Brownell authored
      Fix UDMA throughput bug:  tCYC averages t2CYCTYP/2, but the code
      previously assumed it was the same as t2CYCTYP.  (That is, it was
      using just one clock edge, not both.)  Move the table's type
      declaration so it's adjacent to the table, making it more clear
      what those numbers mean.
      
      On one system this change increased throughput by almost 4x: UDMA/66
      sometimes topped 23 MB/sec (on a drive known to do much better).  On
      another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).
      
      The difference might be caused by the ratio between memory and IDE
      clocks.  In the system with large speedup, this was exactly 2 (as a
      workaround for a rev 1.1 silicon bug).  The other system used a more
      standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
      might have some issues, they're not unheard-of.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      db2f38c2
  6. 18 Apr, 2009 5 commits
  7. 17 Apr, 2009 22 commits