Merge tag 'stm32-dt-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/dt

Merge "STM32 DT updates for v4.6 #2" from Maxime Coquelin:

Highlights:
-----------
 - Fix clock references in GPIO nodes
 - Add early support to stm32f469 MCU
 - Add USB HS support in host mdoe to stm32429-eval board
 - Add Ethernet support to stm32429-eval board

* tag 'stm32-dt-for-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
  ARM: dts: stm32f429: Enable Ethernet on Eval board
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: stm32429i-eval: Add USB HS host mode support
  ARM: dts: stm32f429: Fix clocks referenced by GPIO banks
  ARM: stm32: Supply a DTS file for the STM32F469 Discovery board

Merge tag 'omap-for-v4.6/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Part 2 of device tree changes for omaps for v4.6 merge window" from Tony Lindgren:

- A series of GPMC related interrupt changes from
  Rogeq Quadros <rogerq@ti.com> to prepare adding interrupt
  support to the NAND driver

- Add RTC support for ti81xx

- Correct LogicPD Torpedo mode description

- Add basic support for LG Optimus Black phone in several
  patches by Paul Kocialkowski <contact@paulk.fr>

- Change address-cells for dra7 for LPAE

- Add TBCLK for PWMSS on dra7

* tag 'omap-for-v4.6/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: omap3-sniper: TWL4030 keypad support
  Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
  ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
  ARM: dts: dm814x: dra62x: Fix NAND device nodes
  ARM: dts: DRA7: Add dt nodes for PWMSS
  ARM: dts: DRA7: Add TBCLK for PWMSS
  ARM: dts: DRA7: change address-cells and size-cells
  ARM: dts: omap3-sniper: USB OTG support
  ARM: dts: LG Optimus Black codename sniper basic support
  ARM: dts: dm3730-torpedo-devkit: Add "Wireless" to model
  ARM: dts: Add RTC entry for dm816x
  ARM: dts: Add RTC entry for dm814x and dra62x
  ARM: dts: omap3: Fix NAND device nodes
  ARM: dts: dm8168-evm: ARM: dts: Disable wait pin monitoring for NAND
  ARM: dts: dm816x: Fix NAND device nodes
  ARM: dts: am335x: Disable wait pin monitoring for NAND
  ARM: dts: am335x: Fix NAND device nodes
  ARM: dts: am437x: Disable wait pin monitoring for NAND
  ARM: dts: am437x: Fix NAND device nodes
  ARM: dts: dra7: Remove redundant nand property
  ...

Merge tag 'samsung-dt-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "ARM: EXYNOS: dts for 4.6, 2nd pull" from Krzysztof Kozlowski:

Samsung DeviceTree updates and improvements for v4.6, second round:
1. Split common reboot/poweroff node to separate DTSI.
2. Don't overheat Odroid XU3 by cooling CPU with cpufreq.

* tag 'samsung-dt-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
  ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
  ARM: dts: exynos: Add cooling levels for Exynos5420 CPUs
  ARM: dts: exynos: Move syscon reboot/poweroff to common dtsi

Merge tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.6" from Andy Gross:

* Add documentation for Kryo
* Add RPMCC node for APQ8064
* Updates for MSM8974
* Add board clocks
* Add support for Nexus7 device
* Fixup pmic reg properties
* Various updates/cleanups for APQ8064 based boards

* tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (23 commits)
  ARM: dts: ifc6410: add correct aliases to the i2c and spi bus
  ARM: dts: apq8064: add i2c6 device node.
  ARM: dts: ifc6410: enable cam i2c device
  ARM: dts: apq8064: add gsbi4 with i2c node.
  ARM: dts: apq8064: add missing i2c2 pinctrl info
  ARM: dts: ifc6410: enable spi device on expansion
  ARM: dts: apq8064: add spi5 device node.
  ARM: dts: apq8064: add i2c sleep pinctrl states.
  ARM: dts: apq8064: add pci support in CM QS600
  ARM: dts: apq8064: move pinctrls to dedicated dtsi
  ARM: dts: qcom: fix i2c lables to be inline with others
  dts: msm8974: Add dma channels for blsp2_i2c1 node
  dts: msm8974: Add blsp2_bam dma node
  ARM: dts: qcom: Remove size elements from pmic reg properties
  devicetree: bindings: Document qcom board compatible format
  devicetree: Add DTS file to support the Nexus7 2013 (flo) device.
  devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values
  arm: dts: qcom: Add more board clocks
  ARM: dts: qcom: msm8974: Add WCNSS SMP2P node
  ARM: dts: qcom: msm8974: Add smsm node
  ...

MAC is connected to a PHY in MII mode.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>

This adds support for the volume and gesture keys, using TWL4030 keypad.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This reverts commit 5fcc6730.

The binding may need to change pending related hwmod comments,
so reverting as requested by Paul Walmsley <paul@pwsan.com>.

The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].

[1] dm814x TRM: SPRUGZ8F: 11.2.4.12.2 NAND Device-Ready Pin
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.

The GPMC node will provide an interrupt controller for the
NAND IRQs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add Ethernet support (Synopsys MAC IP 3.50a) on stm32f429 SOC.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>

Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>

After adding cpufreq-dt support to Exynos542x, the Odroid XU3-Lite can
be easily overheated when launching eight CPU-intensive tasks:
	thermal thermal_zone3: critical temperature reached(121 C),shutting down

This seems to be specific to Odroid XU3-Lite board which officially
supports lower frequencies than regular XU3 or XU4. When working at
maximum CPU speed (1800 MHz big and 1300 MHz LITTLE) in warmer place for
longer time, the fan fails to cool down the board and it reaches
critical temperature.

Add CPU cooling to Exynos5422/5800 to fix this issue. When reaching last
interrupt-driven trip-point (70 degrees of Celsius) start passive
cooling in polling mode (slowing CPU by 2 steps). When reaching 85
degrees of Celsius, start slowing even more, down to 600 MHz.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

On Exynos5422 and Exynos5800 we support 12 cpufreq steps (200-1300 MHz) for LITTLE
and 18 steps for big core (200-1700 MHz). Add respective cooling cells.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

On Exynos5420 we support 8 cpufreq steps (600-1300 MHz) for LITTLE and
12 steps for big core (700-1800 MHz). Add respective cooling cells.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

tbclk is used by ehrpwm to generate PWM waveform on DRA7 SoC. Add Linux
clock to control ehrpwm tbclk.
The TRM says, tbclk is derived from SYSCLKOUT. SYSCLKOUT is nothing but
ehrpwm functional clock derived from the gateable interface and
functional clock of PWMSS(l4_root_clk_div).
Refer AM57x TRM SPRUHZ6[1], October 2014, Table 29-4 and Section 29.2.2.1,
Table 29-19 and the NOTE at the end of the table.

[1] www.ti.com/lit/ug/spruhz6/spruhz6.pdf
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge pxa dt for v4.6 from Robert Jarzmik:

This device-tree pxa update brings :
 - a single fix for nand dmaengine node

* tag 'pxa-dt-4.6' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa: fix dma engine node to pxa3xx-nand

Merge tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT Additions for 4.6" from Maxime Ripard:

Quite a few changes, among which:
  - Support for the A83t
  - Support for the eMMC DDR on a few boards
  - Support for the OTG controller on a few boards
  - New boards: Itead Ibox, Cubietruck plus, Homlet v2, Lamobo R1

* tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (34 commits)
  ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards
  ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi
  ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
  dts: sun8i-h3: Add APB0 related clocks and resets
  ARM: dts: sun7i: Add dts file for the lamobo-r1 board
  ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
  ARM: dts: sun4i: Enable USB DRC on the MK802
  ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
  ARM: dts: sun7i: Enable USB DRC on MK808C
  ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3
  ARM: dts: sun8i-a83t: Correct low speed oscillator clocks
  ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
  ARM: dts: sun4i: Itead Iteaduino to use common code
  ARM: dts: sun7i: Add Itead Ibox support
  ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi
  ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
  ...

DRA7 SoC has the capability to support DDR memory upto 4GB. In order to
represent this in memory dt node, the address-cells and size cells
should be 2. So, changing the address-cells and size-cells to 2 and
updating the memory nodes accordingly.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge "mvebu dt for 4.6 (part 2)" from Gregory CLEMENT:

- Reorder Ethernet node on Armada 38x SoCs
- Add device tree for buffalo linkstation ls-gl
- Use the more accurate armada-370-sata string for SATA on Armada 375
- Add NAND description to Armada 370 DB and Armada XP DB

* tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
  ARM: dts: armada-375: use armada-370-sata for SATA
  ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl
  ARM: dts: orion5x: split linkstation lswtgl into common and device parts
  ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
  ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
  ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
  ARM: dts: kirkwood: use unique machine name for ds112

This adds support for USB OTG on the Optimus Black.
The HSUSB0 interface is connected to the TWL4030 USB PHY.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LG Optimus Black codename sniper is a smartphone that was designed and
manufactured by LG Electronics (LGE) and released back in 2011.
It is using an OMAP3630 SoC, GP version.

This adds devicetree support for the device, with only a few basic features
supported, such as debug uart, i2c, internal emmc and external mmc.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
Simon Horman:

* Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
* Add etheravb support to r8a7794
* Correct JP3 jumper description on Porter
* Enable thermal zone on  r8a779[013]
* Replace gpio-key, wakeup with wakeup-source property on r8a7794
* Use demuxer for IIC0/I2C0 on lager
* Use fallback etheravb, pci and pcie compatibility strings as appropriate

* tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7790: use fallback etheravb compatibility string
  ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
  ARM: dts: r8a7794: add EtherAVB support
  ARM: dts: r8a7794: add EtherAVB clock
  ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
  ARM: dts: r8a7794: Add L2 cache-controller node
  ARM: dts: r8a7793: Add L2 cache-controller node
  ARM: dts: r8a7791: Add L2 cache-controller node
  ARM: dts: r8a7790: Add L2 cache-controller nodes
  ARM: dts: r8a73a4: Add L2 cache-controller nodes
  ARM: dts: r8a7793: enable to use thermal-zone
  ARM: dts: r8a7791: enable to use thermal-zone
  ARM: dts: r8a7790: enable to use thermal-zone
  ARM: dts: porter: fix JP3 jumper description
  ARM: dts: r8a7794: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pci compatibility string
  ARM: dts: r8a7790: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pcie compatibility string
  ARM: dts: r8a7790: use fallback pcie compatibility string

This reverts commit 8ba671ef.

As reported by kbuild test robot <fengguang.wu@intel.com>:

   In file included from arch/arm/boot/dts/mt2701-evb.dts:16:0:
>> arch/arm/boot/dts/mt2701.dtsi:18:28: fatal error: mt2701-pinfunc.h: No such file or directory
    #include "mt2701-pinfunc.h"
                               ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.

Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.

Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Merge "Broadcom devicetree changes for 4.6" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree changes:

- Rafal adds a Device Tree for the D-Link DIR-885L router which is based on the
  BCM47094 SoC similar to the BCM4709

- Simran adds proper audio clock Device Tree nodes to the Cygnus platforms

- Martin adds the auxiliary SPI controllers, makes the UART naming convention
  more standard, and finally adds the auxiliary UART found in the BCM2835 to the
  BCM2835 Device Tree

- Remi adds PWM clock support to the BCM2835 Device Tree

- Lubomir adds a Device Tree for the Raspberry Pi Model A

- Alexander adds Device Tree information for the Raspberry Pi USB power domain

- Dhananjay enables the GPIO-A controller for the Northstar Plus SoCs

- Jon fixes the PCIE Device Tree nodes by pulling them out of the bus-level node,
  removes duplicate CPU definitions, adds PMU nodes, SP804 timers, and SP805 watchdog
  to the Northstar Plus SoCs

* tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: bcm2835: add bcm2835-aux-uart support to DT
  ARM: dts: NSP: Add SP805 Support to DT
  ARM: dts: NSP: Add SP804 Support to DT
  ARM: dts: NSP: Add PMU Support to DT
  ARM: dts: NSP: Fix CPU DT issue
  ARM: dts: NSP: Fix PCIE DT issue
  ARM: dts: enable GPIO-a for Broadcom NSP
  ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
  ARM: bcm2835: dt: Add Raspberry Pi Model A
  ARM: bcm2835: follow dt uart node-naming convention
  ARM: bcm2835: Add PWM clock support to the device tree
  ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
  ARM: dts: Add audio clock to the existing Broadcom Cygnus clock DT
  ARM: BCM5301X: Add DT for D-Link DIR-885L

With the newly available MSIX driver for Alpine, add the corresponding
node in the Alpine device tree.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "ARM: Xilinx Zynq dt patches for v4.6" from Michal Simek

- Add usb phy for Zybo
- Use earlycon instead of earlyprintk

* tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Use earlycon instead of earlyprintk
  ARM: dts: zynq: Enable USB and USB PHY for ZYBO

Merge tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM: Keystone DTS for 4.6" from Santosh Shilimkar:

ARM: DTS: Add new bindings for K2G and the K2G evm

K2G SoC family is the newest version of the Keystone family of processors.

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf

* tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Add minimum support for K2G evm
  ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
  ARM: keystone: Create new binding for K2G SoC

Merge tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:

- N900 improvments for adp1653 and gpio keys

- Add missing bandgap data for omap3

- Add more devices for compulab cm-t335

- Add n950 WLAN support, enable modem, add pinctrl for SSI

- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND

- Add syscon node for PHY's on dra7

- Add support more devices on logicpd torpedo

- Add USB host support for igep and specify boot console

- Fix audio clock for am335x-sl50 and specify boot console

- Remove deprecated tx-fifo-resize for dwc3 that was only used on
  omap5 es1.0

- Add dra7 thermal data

- Update am43x-epos-evm compatible string to am438

- Add support for logicpd dm3730 som-lv

* tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
  ARM: dts: am57xx-beagle-x15: Add eeprom information
  ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
  ARM: dts: n900: Use linux input defines instead hardcoded constants
  ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
  ARM: dts: omap3logic: Add PWM-Backlight
  ARM: dts: omap3-n900: Allow gpio keys to be disabled
  ARM: dts: am43x-epos-evm: Add the am438 compatible string
  ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
  ARM: dts: DRA7: Add IVA thermal data
  ARM: dts: DRA7: Add DSPEVE thermal data
  ARM: dts: remove deprecated property dwc3
  ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
  ARM: dts: am335x-sl50: Fix audio codec setup.
  ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
  ARM: dts: omap3-igep0030-common: Add USB Host support
  ARM: dts: igep00x0: Specify the device to be used for boot console output.
  ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
  ARM: dts: OMAP3-N950-N9: Enable modem
  ARM: dts: OMAP3-N950-N9: Enable SSI module
  ARM: dts: LogicPD Torpedo: Add SPI EEPROM
  ...

Merge "ARM: mediatek: dts updates for v4.6" from Matthias Brugger:

Add support for mt7623 SoC.
Enable SMP support for mt7623.
Enable SMP support for mt2701
Add pinctrl for mt2701

* tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek:
  arm: dts: Add pinctrl/GPIO/EINT node for mt2701
  ARM: dts: mt2701: enable basic SMP bringup for mt2701
  ARM: dts: mt7623: enable SMP bringup
  ARM: dts: mediatek: add MT7623 basic support
  Document: DT: Add bindings for mediatek MT7623 SoC Platform

OrangePi Plus board has dwo leds - green ("pwr") and red ("status")
and a switch ("sw4"). This patch describes them in a devicetree.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This patch adds correct aliases to spi and i2c buses so that they get
correct matching bus numbers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds i2c6 device node and pinctrls required for IFC6410 on
MIPI-CSI connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables i2c bus for camera via mipi-csi connector on ifc6410.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds gsbi4 and i2c node.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds missing i2c2 pinctrl information in i2c2 node.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables spi device on the 30 pin expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds spi5 device node, spi5 is used on ifc6410 on the
expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds missing i2c pinctrl sleep states.
Also add 16mA drive strength to the pins so that we can detect wide
range of i2c devices on the other side of level shifters.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>