Creating tracefs entries with tracefs_create_file() followed by pr_warn()
is tedious and repetitive, we can use trace_create_file() to simplify
this process and make the code more readable.

Link: https://lkml.kernel.org/r/20220114131052.534382-1-ytcoode@gmail.comAcked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The direct trampoline and graph coexistence test sets global_ops to
trace only 'trace_selftest_dynamic_test_func', but does not reset it
after the test is completed, resulting in the function filter being set
already after the system starts. Although it can be reset through the
tracefs interface, it is more or less confusing to the user, and we
should reset it to trace all functions after the trampoline/graph test
completes.

Link: https://lkml.kernel.org/r/20220427034119.24668-1-lihuafei1@huawei.com
Link: https://lore.kernel.org/all/20220418073958.104029-1-lihuafei1@huawei.com/

Fixes: 130c0806 ("tracing: Add trampoline/graph selftest")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The print fmt check against trace events to make sure that the format does
not use pointers that may be freed from the time of the trace to the time
the event is read, gives a false positive on %pISpc when reading data that
was saved in __get_dynamic_array() when it is perfectly fine to do so, as
the data being read is on the ring buffer.

Link: https://lore.kernel.org/all/20220407144524.2a592ed6@canb.auug.org.au/

Cc: stable@vger.kernel.org
Fixes: 5013f454 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.

While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].

Link: https://lkml.kernel.org/r/20220427170734.819891-5-jakobkoschel@gmail.com

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.

To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].

This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.

Link: https://lkml.kernel.org/r/20220427170734.819891-4-jakobkoschel@gmail.com

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element
[1].

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220427170734.819891-3-jakobkoschel@gmail.com

Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In preparation to limit the scope of the list iterator variable to the
traversal loop, use a dedicated pointer to point to the found element
[1].

Before, the code implicitly used the head when no element was found
when using &pos->list. Since the new variable is only set if an
element was found, the head needs to be used explicitly if the
variable is NULL.

Link: https://lkml.kernel.org/r/20220427170734.819891-2-jakobkoschel@gmail.com

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add documentation for newly introduced trace clock "tai".
This clock corresponds to CLOCK_TAI.

Link: https://lkml.kernel.org/r/20220414091805.89667-4-kurt@linutronix.deSigned-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

A fast/NMI safe accessor for CLOCK_TAI has been introduced.
Use it for adding the additional trace clock "tai".

Link: https://lkml.kernel.org/r/20220414091805.89667-3-kurt@linutronix.deSigned-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When the new logic was made to handle deltas of events from interrupts
that interrupted other events, it required 64 bit local atomics.
Unfortunately, 64 bit local atomics are expensive on 32 bit architectures.
Thus, commit 10464b4a ("ring-buffer: Add rb_time_t 64 bit operations
for speeding up 32 bit") created a type of seq lock timer for 32 bits.
It used two 32 bit local atomics, but required 2 bits from them each for
synchronization, making it only 60 bits.

Add a new "msb" field to hold the extra 4 bits that are cut off.

Link: https://lore.kernel.org/all/20220426175338.3807ca4f@gandalf.local.home/
Link: https://lkml.kernel.org/r/20220427170812.53cc7139@gandalf.local.homeSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There's an absolute timestamp event in the ring buffer, but this only
saves 59 bits of the timestamp, as the 5 MSB is used for meta data
(stating it is an absolute time stamp). This was never an issue as all the
clocks currently in use never used those 5 MSB. But now there's a new
clock (TAI) that does.

To handle this case, when reading an absolute timestamp, a previous full
timestamp is passed in, and the 5 MSB of that timestamp is OR'd to the
absolute timestamp (if any of the 5 MSB are set), and then to test for
overflow, if the new result is smaller than the passed in previous
timestamp, then 1 << 59 is added to it.

All the extra processing is done on the reader "slow" path, with the
exception of the "too big delta" check, and the reading of timestamps
for histograms.

Note, libtraceevent will need to be updated to handle this case as well.
But this is not a user space regression, as user space was never able to
handle any timestamps that used more than 59 bits.

Link: https://lore.kernel.org/all/20220426175338.3807ca4f@gandalf.local.home/
Link: https://lkml.kernel.org/r/20220427153339.16c33f75@gandalf.local.home

Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Move trace_eval_init() to subsys_initcall to make it start
earlier.
And to avoid tracer_init_tracefs being blocked by
trace_event_sem which trace_eval_init() hold [1],
queue tracer_init_tracefs() to eval_map_wq to let
the two works being executed sequentially.

It can speed up the initialization of kernel as result
of making tracer_init_tracefs asynchronous.

On my arm64 platform, it reduce ~20ms of 125ms which total
time do_initcalls spend.

Link: https://lkml.kernel.org/r/20220426122407.17042-3-mark-pk.tsai@mediatek.com

[1]: https://lore.kernel.org/r/68d7b3327052757d0cd6359a6c9015a85b437232.camel@pengutronix.deSigned-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

To prepare for support asynchronous tracer_init_tracefs initcall,
avoid calling create_trace_option_files before __update_tracer_options.
Otherwise, create_trace_option_files will show warning because
some tracers in trace_types list are already in tr->topts.

For example, hwlat_tracer call register_tracer in late_initcall,
and global_trace.dir is already created in tracing_init_dentry,
hwlat_tracer will be put into tr->topts.
Then if the __update_tracer_options is executed after hwlat_tracer
registered, create_trace_option_files find that hwlat_tracer is
already in tr->topts.

Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com

Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Use if and else instead of if(A) and if (!A).

Link: https://lkml.kernel.org/r/20220426070628.167565-1-wanjiabing@vivo.comSigned-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Use `WARN(cond, ...)` instead of `if (cond)` + `printk(...)` +
`WARN_ON(1)`.

Link: https://lkml.kernel.org/r/20220424131932.3606-1-guozhengkui@vivo.comSuggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the
cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the
atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel,
these locks are replaced with sleepable rt-spinlock, so the stack calltrace will
be triggered.
Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start
tp_printk=1" enabled.

 BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
 preempt_count: 2, expected: 0
 RCU nest depth: 0, expected: 0
 Preemption disabled at:
 [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x60/0x8c
  dump_stack+0x10/0x12
  __might_resched.cold+0x11d/0x155
  rt_spin_lock+0x40/0x70
  trace_event_buffer_commit+0x2fa/0x4c0
  ? map_vsyscall+0x93/0x93
  trace_event_raw_event_initcall_start+0xbe/0x110
  ? perf_trace_initcall_finish+0x210/0x210
  ? probe_sched_wakeup+0x34/0x40
  ? ttwu_do_wakeup+0xda/0x310
  ? trace_hardirqs_on+0x35/0x170
  ? map_vsyscall+0x93/0x93
  do_one_initcall+0x217/0x3c0
  ? trace_event_raw_event_initcall_level+0x170/0x170
  ? push_cpu_stop+0x400/0x400
  ? cblist_init_generic+0x241/0x290
  kernel_init_freeable+0x1ac/0x347
  ? _raw_spin_unlock_irq+0x65/0x80
  ? rest_init+0xf0/0xf0
  kernel_init+0x1e/0x150
  ret_from_fork+0x22/0x30
  </TASK>

Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.comSigned-off-by: Jun Miao <jun.miao@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

No need to traverse to the end of string. If the first byte is not a NUL
char, it's guaranteed `if (strlen(glob))` is true.

Link: https://lkml.kernel.org/r/20220417185630.199062-3-ammarfaizi2@gnuweeb.org

Cc: Ingo Molnar <mingo@redhat.com>
Cc: GNU/Weeb Mailing List <gwml@vger.gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If `WARN_ON(!glob)` is ever triggered, we will still continue executing
the next lines. This will trigger the more serious problem, a NULL
pointer dereference bug.

Just return -EINVAL if @glob is NULL.

Link: https://lkml.kernel.org/r/20220417185630.199062-2-ammarfaizi2@gnuweeb.org

Cc: Ingo Molnar <mingo@redhat.com>
Cc: GNU/Weeb Mailing List <gwml@vger.gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently the tp_printk option has no effect on syscall tracepoint.
When adding the kernel option parameter tp_printk, then:

echo 1 > /sys/kernel/debug/tracing/events/syscalls/enable

When running any application, no trace information is printed on the
terminal.

Now added printk for syscall tracepoints.

Link: https://lkml.kernel.org/r/20220410145025.681144-1-xiehuan09@gmail.comSigned-off-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add a description how to embed the bootconfig file into kernel.

Link: https://lkml.kernel.org/r/164921228987.1090670.16843569536974147213.stgit@devnote2

Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This allows kernel developer to embed a default bootconfig file in
the kernel instead of embedding it in the initrd. This will be good
for who are using the kernel without initrd, or who needs a default
bootconfigs.
This needs to set two kconfigs: CONFIG_BOOT_CONFIG_EMBED=y and set
the file path to CONFIG_BOOT_CONFIG_EMBED_FILE.

Note that you still need 'bootconfig' command line option to load the
embedded bootconfig. Also if you boot using an initrd with a different
bootconfig, the kernel will use the bootconfig in the initrd, instead
of the default bootconfig.

Link: https://lkml.kernel.org/r/164921227943.1090670.14035119557571329218.stgit@devnote2

Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Check the bootconfig's checksum before removing the bootconfig data
from initrd to avoid modifying initrd by mistake.
This will also simplifies the get_boot_config_from_initrd() interface.

Link: https://lkml.kernel.org/r/164921226891.1090670.16955839243639298134.stgit@devnote2

Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since the APIs defined in the bootconfig.o are not individually used,
it is meaningless to build it as library by lib-y. Use obj-y for that.

Link: https://lkml.kernel.org/r/164921225875.1090670.15565363126983098971.stgit@devnote2

Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add the description of @n_sort_keys and make @sort_key ->
@sort_keys in tracing_map_sort_entries() kernel-doc comment
to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.

kernel/trace/tracing_map.c:1073: warning: Function parameter or member
'sort_keys' not described in 'tracing_map_sort_entries'
kernel/trace/tracing_map.c:1073: warning: Function parameter or member
'n_sort_keys' not described in 'tracing_map_sort_entries'
kernel/trace/tracing_map.c:1073: warning: Excess function parameter
'sort_key' description in 'tracing_map_sort_entries'

Link: https://lkml.kernel.org/r/20220402072015.45864-1-yang.lee@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Most architectures have ftrace related stuff in arch/*/kernel/ftrace.c
but powerpc has it spread in multiple files located in
arch/powerpc/kernel/trace/
In several architectures, there are also additional files containing
'ftrace' as part of the name but with some prefix or suffix.

Use wildcards to enlarge coverage.

With arch/*/*/*/*ftrace*:
	arch/alpha/include/asm/ftrace.h
	arch/arm64/include/asm/ftrace.h
	arch/arm/include/asm/ftrace.h
	arch/csky/include/asm/ftrace.h
	arch/csky/kernel/probes/ftrace.c
	arch/ia64/include/asm/ftrace.h
	arch/m68k/include/asm/ftrace.h
	arch/microblaze/include/asm/ftrace.h
	arch/mips/include/asm/ftrace.h
	arch/nds32/include/asm/ftrace.h
	arch/parisc/include/asm/ftrace.h
	arch/powerpc/include/asm/ftrace.h
	arch/powerpc/kernel/trace/ftrace_64_pg.S
	arch/powerpc/kernel/trace/ftrace.c
	arch/powerpc/kernel/trace/ftrace_low.S
	arch/powerpc/kernel/trace/ftrace_mprofile.S
	arch/riscv/include/asm/ftrace.h
	arch/riscv/kernel/probes/ftrace.c
	arch/s390/include/asm/ftrace.h
	arch/s390/include/asm/ftrace.lds.h
	arch/sh/include/asm/ftrace.h
	arch/sparc/include/asm/ftrace.h
	arch/x86/include/asm/ftrace.h
	arch/x86/kernel/kprobes/ftrace.c
	arch/xtensa/include/asm/ftrace.h

With arch/*/*/*ftrace*:
	arch/arm64/kernel/entry-ftrace.S
	arch/arm64/kernel/ftrace.c
	arch/arm/kernel/entry-ftrace.S
	arch/arm/kernel/ftrace.c
	arch/csky/kernel/ftrace.c
	arch/ia64/kernel/ftrace.c
	arch/microblaze/kernel/ftrace.c
	arch/mips/kernel/ftrace.c
	arch/nds32/kernel/ftrace.c
	arch/parisc/kernel/ftrace.c
	arch/powerpc/kernel/kprobes-ftrace.c
	arch/riscv/kernel/ftrace.c
	arch/s390/kernel/ftrace.c
	arch/s390/kernel/ftrace.h
	arch/sh/kernel/ftrace.c
	arch/sparc/kernel/ftrace.c
	arch/x86/kernel/ftrace_32.S
	arch/x86/kernel/ftrace_64.S
	arch/x86/kernel/ftrace.c

Link: https://lkml.kernel.org/r/e8338c0ad0e73991cbd8f31c215b16ea4efe212d.1648189904.git.christophe.leroy@csgroup.euSigned-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix the following W=1 kernel warnings:

kernel/trace/trace.c:1181: warning: expecting prototype for
tracing_snapshot_cond_data(). Prototype was for
tracing_cond_snapshot_data() instead.

Link: https://lkml.kernel.org/r/20220218100849.122038-1-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Each description should start with a hyphen and a space. Insert
spaces to fix it.

Link: https://lkml.kernel.org/r/TYCP286MB19130AA4A9C6FC5A8793DED2A1359@TYCP286MB1913.JPNP286.PROD.OUTLOOK.COMSigned-off-by: Oscar Shiang <oscar0225@livemail.tw>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

hist_register_trigger() handles both new hist registration as well as
existing hist registration through event_command.reg().

Adding a new function, existing_hist_update_only(), that checks and
updates existing histograms and exits after doing so allows the
confusing logic in event_hist_trigger_parse() to be simplified.

Link: https://lkml.kernel.org/r/211b2cd3e3d7e00f4f8ad45ef8b33063da6a7e05.1644010576.git.zanussi@kernel.orgSigned-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Simplify the existing event_command.parse() implementations by having
them make use of the helper functions previously introduced.

Link: https://lkml.kernel.org/r/b353e3427a81f9d3adafd98fd7d73e78a8209f43.1644010576.git.zanussi@kernel.orgSigned-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since event_trigger_data contains the .ops trigger_ops field, there's
no reason to pass the trigger_ops separately. Remove it as a param
from functions whenever event_trigger_data is passed.

Link: https://lkml.kernel.org/r/9856c9bc81bde57077f5b8d6f8faa47156c6354a.1644010575.git.zanussi@kernel.orgSigned-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Code for registering triggers assumes it's possible to register more
than one trigger at a time.  In fact, it's unimplemented and there
doesn't seem to be a reason to do that.

Remove the n_registered param from event_trigger_register() and fix up
callers.

Doing so simplifies the logic in event_trigger_register to the point
that it just becomes a wrapper calling event_command.reg().

It also removes the problematic call to event_command.unreg() in case
of failure.  A new function, event_trigger_unregister() is also added
for callers to call themselves.

The changes to trace_events_hist.c simply allow compilation; a
separate patch follows which updates the hist triggers to work
correctly with the new changes.

Link: https://lkml.kernel.org/r/6149fec7a139d93e84fa4535672fb5bef88006b0.1644010575.git.zanussi@kernel.orgSigned-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Remove the second 'is' and 'to'.

Link: https://lkml.kernel.org/r/20220207131216.2059997-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel
tracing infrastructure has support for using different clocks to generate
timestamps for trace events. Especially in TSN networks it's useful to have TAI
as trace clock, because the application scheduling is done in accordance to the
network time, which is based on TAI. With a tai trace_clock in place, it becomes
very convenient to correlate network activity with Linux kernel application
traces.

Use the same implementation as ktime_get_boot_fast_ns() does by reading the
monotonic time and adding the TAI offset. The same limitations as for the fast
boot implementation apply. The TAI offset may change at run time e.g., by
setting the time or using adjtimex() with an offset. However, these kind of
offset changes are rare events. Nevertheless, the user has to be aware and deal
with it in post processing.

An alternative approach would be to use the same implementation as
ktime_get_real_fast_ns() does. However, this requires to add an additional u64
member to the tk_read_base struct. This struct together with a seqcount is
designed to fit into a single cache line on 64 bit architectures. Adding a new
member would violate this constraint.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de

Pull serial driver fix from Greg KH:
 "This is a single serial driver fix for a build issue that showed up
  due to changes that came in through the tty tree in 5.18-rc1 that were
  missed previously. It resolves a build error with the mpc52xx_uart
  driver.

  It has been in linux-next this week with no reported problems"

* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.18-rc2 that resolves an
  endian issue for the r8188eu driver. It has been in linux-next all
  this week with no reported problems"

* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Fix PPPoE tag insertion on little endian systems

Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are two small driver core changes for 5.18-rc2.

  They are the final bits in the removal of the default_attrs field in
  struct kobj_type. I had to wait until after 5.18-rc1 for all of the
  changes to do this came in through different development trees, and
  then one new user snuck in. So this series has two changes:

   - removal of the default_attrs field in the powerpc/pseries/vas code.

     The change has been acked by the PPC maintainers to come through
     this tree

   - removal of default_attrs from struct kobj_type now that all
     in-kernel users are removed.

     This cleans up the kobject code a little bit and removes some
     duplicated functionality that confused people (now there is only
     one way to do default groups)

  Both of these have been in linux-next for all of this week with no
  reported problems"

* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: kobj_type: remove default_attrs
  powerpc/pseries/vas: use default_groups in kobj_type

Pull char/misc driver fix from Greg KH:
 "A single driver fix. It resolves the build warning issue on 32bit
  systems in the habannalabs driver that came in during the 5.18-rc1
  merge cycle.

  It has been in linux-next for all this week with no reported problems"

* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Fix test build failures

Pull powerpc fixes from Michael Ellerman:

 - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
   guest could be lost (or delayed until the next guest exit).

 - Disable SCV (system call vectored) when PR KVM guests could be run.

 - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
   guests.

 - Add a new KVM CAP to indicate if AIL == 3 is supported.

 - Fix a regression when hotplugging a CPU to a memoryless/cpuless node.

 - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
   fixes crashes seen due to hardened usercopy.

 - Revert a change to max_mapnr which broke HIGHMEM.

Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.

* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: Set max_mapnr correctly"
  powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
  KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
  powerpc/numa: Handle partially initialized numa nodes
  powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
  KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
  KVM: PPC: Book3S PR: Disallow AIL != 0
  KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
  KVM: PPC: Book3S HV P9: Fix "lost kick" race

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - A fix for a long standing bug in the ARM GICv3 redistributor
     polling which uses the wrong bit number to test.

   - Prevent translation of bogus ACPI table entries which map device
     interrupts into the IPI space on ARM GICs.

   - Don't write into the pending register of ARM GICV4 before the scan
     in hardware has completed.

   - A set of build and correctness fixes for the Qualcomm MPM driver"

* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic, gic-v3: Prevent GSI to SGI translations
  irqchip/gic-v3: Fix GICR_CTLR.RWP polling
  irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
  irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
  irq/qcom-mpm: Fix build error without MAILBOX