The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The proposed _tlbie call at update_mmu_cache() is safe because:

Addresses for which update_mmu_cache() gets invocated are never inside the
static kernel virtual mapping, meaning that there is no risk for the
_tlbie() here to be thrashing the pinned entry, as Dan suspected.

The intermediate TLB state in which this bug can be triggered is not
visible by userspace or any other contexts, except the page fault handling
path.  So there is no need to worry about userspace dcbxxx users.

The other solution to this is to avoid dcbst misbehaviour in the first
place, which involves changing in-kernel "dcbst" callers to use 8xx
specific SPR's.

Summary:

On 8xx, cache control instructions (particularly "dcbst" from
flush_dcache_icache) fault as write operation if there is an unpopulated
TLB entry for the address in question.  To workaround that, we invalidate
the TLB here, thus avoiding dcbst misbehaviour.
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/mips/kernel/signal.c: In function 'do_signal':
arch/mips/kernel/signal.c:460: error: too many arguments to function 'try_to_freeze'
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I spotted this issue while in memmap_init last week.  I can't say the
change has any test coverage by me.  start_pfn was formerly used in main
"for" loop.  The fix is replace start_pfn with pfn.
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Lost a curly brace in translation.  Everything is better now.
Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Some manual fixups required due to clashes with the PF_FREEZE cleanups.

CONFIG_CONFIG_TUNER_MULTI_I2C probably isn't what the
author meant to create.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If cfq is managing a queue and a new scheduler is later selected, it is
possible for the cfqd unplug_work work to be queued after the kblockd
work struct has been flushed.  The problem is the ordering of
cfq_shutdown_timer_wq() and blk_put_queue() in cfq_put_cfqd().  The
latter may rearm the work, leaving cfq_kick_queue() with dead data.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add ioprio documentation
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Adjust slice values

- Instead of one async queue, one is defined per priority level. This
  prevents kernel threads (such as reiserfs/x and others) that run at
  higher io priority from conflicting with others. Previously, it was a
  coin toss what io prio the async queue got, it was defined by who
  first set up the queue.

- Let a time slice only begin, when the previous slice is completely
  done. Previously we could be somewhat unfair to a new sync slice, if
  the previous slice was async and had several ios queued. This might
  need a little tweaking if throughput suffers a little due to this,
  allowing perhaps an overlap of a single request or so.

- Optimize the calling of kblockd_schedule_work() by doing it only when
  it is strictly necessary (no requests in driver and work left to do).

- Correct sync vs async logic. A 'normal' process can be purely async as
  well, and a flusher can be purely sync as well. Sync or async is now a
  property of the class defined and requests pending. Previously writers
  could be considered sync, when they were really async.

- Get rid of the bit fields in cfqq and crq, use flags instead.

- Various other cleanups and fixes
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In cfq_find_next_crq(), cfq tries to find the next request by choosing
one of two requests before and after the current one.  Currently, when
choosing the next request, if there's no next request, the next
candidate is NULL, resulting in selection of the previous request.  This
results in weird scheduling.  Once we reach the end, we always seek
backward.

The correct behavior is using the first request as the next candidate.
cfq_choose_req() already has logics for handling wrapped requests.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Patch from Deepak Saxena

Accidently swapped the order of movne and orrne. Bad.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Michael Burian

This does not look like an include file for "i386", so use "ARM" instead.
Signed-off-by: Michael Burian <dynmail1@gassner-waagen.at>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

It doesn't make sense for this to be in mm-armv.c now that 26-bit
ARM support is no longer integrated into arch/arm.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

It doesn't make sense to have the PGD kernel pointers initialisation
separate from the PGD user pointers, especially when we clean the
data cache over the whole range.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This call allows the dynamic tick support to reprogram the timer
immediately before the CPU idles.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

My scripts missed committing this file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add separate files for the different 8250 ISA-based serial boards.

Looking across all the various architectures, it seems reasonable that
we can key the availability of the configuration options for these
beasts to the bus-related symbols (iow, CONFIG_ISA).  We also standardise
the base baud/uart clock rate for these boards - I'm sure that isn't
architecture specific, but is solely dependent on the crystal fitted
on the board (which should be the same no matter what type of machine
its fitted into.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

68328serial.c does not make use of register_serial/unregister_serial,
which is traditionally used to register 8250-compatible UARTs with
the 8250-compatible serial driver.

Acked-by: David McCullough
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Use the DMA_32BIT_MASK constant from dma-mapping.h
when calling pci_set_dma_mask() or pci_set_consistent_dma_mask()
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Domen Puncer <domen@coderock.org>

This is a multi-part message in MIME format.

Check the link state during b44_open.  This closes a 1 HZ window
that existed after b44_open ran but before the b44_timer handler ran,
during which ethtool would report "Link detected: yes" no matter what
the link state actually was.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch allows the tulip driver to suspend and resume properly.  It was
originally written by Karsten Keil and then modified by Adam Belay.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Adam Belay <abelay@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

drivers/net/wireless/prism54/isl_38xx.c:131: warning: 'current_time.tv_sec' is used uninitialized in this function
drivers/net/wireless/prism54/isl_38xx.c:131: warning: 'current_time.tv_usec' is used uninitialized in this function
Signed-off-by: Olaf Hering <olh@suse.de>

Some USB ethernet drivers did not accept multicast frames appropriately.
IPv6 did not work with those drivers without this patch.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Elecom (Laneed) LD-USBL/TX support.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Module needs a license to prevent kernel tainting.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>

diffstat:=
 drivers/net/3c523.c |    1 +
 1 files changed, 1 insertion(+)

Jeff,

Just incase this got lost in the recent netdev mailing list transition
here is a nicer version of Andy's patch for gianfar.

- kumar

* TCP/IP/UDP checksumming and verification
* VLAN tag insertion/extraction
* Larger multicast hash-table
* Padding to align IP headers

Also added:
* msg lvl support
* Some whitespace cleanup
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>

The race causes a kernel oops when smc_hardware_send_pkt() tries to
dereference pending_tx_skb which would have been freed from one of the
driver reset paths just after the tx_task tasklet has been scheduled.
This race is possible on SMP but was uncovered by the kernel RT work.
Signed-off-by: Nicolas Pitre <nico@cam.org>

--Boundary-00=_F5lsC5eH1wGW5o9
Content-Type: text/plain;
  charset="koi8-r"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hi Jeff,

In some messages in via-rhine.c there is a leading space
for no apparent reason. This patch removes it.
--
vda

--Boundary-00=_F5lsC5eH1wGW5o9
Content-Type: text/x-diff;
  charset="koi8-r";
  name="via-rhine.c.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="via-rhine.c.diff"

Driver version, white space, comments & other
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>

Included proposals to false late collisions due to H/W latencies
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>