In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.

In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230912041904.30721-1-stanley_chang@realtek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document the DWC3 USB bindings for Realtek SoCs.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230826031028.1892-2-stanley_chang@realtek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Realtek DHC RTD SoCs integrate dwc3 IP and has some customizations to
support different generations of SoCs.

The RTD1619b subclass SoC only supports USB 2.0 from dwc3. The driver
can set a maximum speed to support this. Add role switching function,
that can switch USB roles through other drivers, or switch USB roles
through user space through set /sys/class/usb_role/.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230826031028.1892-1-stanley_chang@realtek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Mux agent driver can configure cable details such as cable type and
cable speed received as a part of displayport configuration to support
Displayport Alternate mode 2.1.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Link: https://lore.kernel.org/r/20230920023243.2494410-6-utkarsh.h.patel@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Displayport Alternatemode 2.1 requires cable capabilities such as cable
signalling, cable type, DPAM version which then will be used by mux
driver for displayport configuration. These capabilities can be derived
from the Cable VDO.
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Link: https://lore.kernel.org/r/20230920023243.2494410-5-utkarsh.h.patel@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a helper macro to get the Type C cable speed when provided the
cable VDO.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Link: https://lore.kernel.org/r/20230920023243.2494410-4-utkarsh.h.patel@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per USB Type-C Connector specification v2.2 section F.2.6, BIT25
represents Active or Passive cable. Added BIT25 defination to the
Thunderbolt 3 cable discover mode VDO.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Link: https://lore.kernel.org/r/20230920023243.2494410-3-utkarsh.h.patel@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Displayport Alternate mode 2.1 requires configuration for additional
cable details such as signalling for cable, UHBR13.5 Support, Cable type
and DPAM version.
These details can be used with mux drivers to configure SOP DP
configuration for Displayport Alternate mode 2.1.
This change also includes pertinent cable signalling support in displayport
alternate mode.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Link: https://lore.kernel.org/r/20230920023243.2494410-2-utkarsh.h.patel@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The uvc_video_enable function is calling cancel_work_sync which will be
blocking as long as new requests will be queued with the while loop. To
ensure an earlier stop in the pumping loop in this particular case we
rework the worker to requeue itself on every requests. Since the worker
is already running prioritized, the scheduling overhad did not have real
impact on the performance.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230911140530.2995138-4-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The uvc_video_enable function of the uvc-gadget driver is dequeing and
immediately deallocs all requests on its disable codepath. This is not
save since the dequeue function is async and does not ensure that the
requests are left unlinked in the controller driver.

By adding the ep_free_request into the completion path of the requests
we ensure that the request will be properly deallocated.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230911140530.2995138-3-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the uvc-video gadget driver is using the v4l2 interface,
the streamon and streamoff can be triggered at any times. To ensure
that the pump worker will be closed as soon the userspace is
calling streamoff we synchronize the state of the gadget ensuring
the pump worker to bail out.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230911140530.2995138-2-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the event gadget_connect call (which invokes pullup) fails,
propagate the error to udc bind operation which in turn sends the
error to configfs. The userspace can then retry enumeration if
it chooses to.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230927073027.27952-1-quic_kriskura@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():

    spin_lock_irqsave(&hsotg->lock, flags);
    ...
	if (!urb->hcpriv) {
		dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
		goto out;
	}
    rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
    ...
out:
    spin_unlock_irqrestore(&hsotg->lock, flags);

When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.

This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.

To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.

Fixes: 33ad261a ("usb: dwc2: host: spinlock urb_enqueue")
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a SPDX entry, so we can remove the boilerplate.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230922064551.4663-1-wsa+renesas@sang-engineering.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to check the argument of i2c_unregister_device() because the
function itself does it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230922080421.35145-2-wsa+renesas@sang-engineering.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drop of_match_ptr() from rt1711h_of_match and get rid of ugly CONFIG_OF
ifdeffery. This slightly increases the size of rt1711h_of_match on non-OF
system and shouldn't be an issue.

It also allows, in case if needed, to enumerate this device via ACPI with
PRP0001 magic.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-6-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RT1715 has PD30 extended message compared to RT1711H. Add a variable
enable_pd30_extended_message to struct rt1711h_chip_info to enable this
feature for RT1715.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-5-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The RT1715 needs 0.35V/0.75V rx threshold for rd/rp whereas it is 0.4V/0.7V
for RT1711H. Add rxdz_sel variable to struct rt1711h_chip_info for
handling this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-4-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently did varaible is used for HW differences between the devices which
complicates the code by adding checks.

Therefore it is better to convert enum->pointer for data match and extend
match support for both ID and OF tables by using i2c_get_match_data().

Add struct rt1711h_chip_info with did variable and replace did->info in
struct rt1711h_chip. Later patch will add more hw differences to
struct rt1711h_chip_info and avoid checking did for HW differences.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-3-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove trailing comma in the terminator entry for OF table.
While at it, drop a space in the terminator for ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230906080619.36930-2-biju.das.jz@bp.renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DWC3 driver needs access to XHCI Extended Capabilities registers to
read number of usb2 ports and usb3 ports present on multiport controller.
Since the extcaps header is sufficient to parse this info, move port_count
related macros and structure from xhci.h to xhci-ext-caps.h.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20230828133033.11988-4-quic_kriskura@quicinc.comAcked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add bindings to indicate properties required to support multiport
on Synopsys DWC3 controller.
Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230828133033.11988-3-quic_kriskura@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.

There are 4 power event irq interrupts supported by this controller
(one for each port of multiport). Added all the 4 as non-optional
interrupts for SC8280XP-MP

Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
IRQ's related to 4 ports of SC8280XP Teritiary controller.

Also added ss phy irq for both SS Ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230828133033.11988-2-quic_kriskura@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The OS, such as ChromeOS, uses Android Runtime to run Android applications.
This necessitates supporting tools, for example, Android Debugger (ADB).
On host to host setup xHC.DbC shall support ADB with USB. This requires
user space to control USB roles.

Enable user space control to modify the USB Type-C role. At run time
it will create a role attribute in /sys/class/usb_role/<switch>/.
Attribute can be modified based on the values suggested in the
Documentation/ABI/testing/sysfs-class-usb_role.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Link: https://lore.kernel.org/r/20230906072717.32485-1-uday.m.bhat@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enabling the tps65217-charger driver/module causes an interrupt conflict
with the vbus driver resulting in a probe failure.
The conflict is resolved by changing both driver's threaded interrupt
request function from IRQF_ONESHOT to IRQF_SHARED.
Signed-off-by: Grant B Adams <nemith592@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230823085430.6610-3-nemith592@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enabling the tps65217-charger driver/module causes an interrupt conflict
with the vbus driver resulting in a probe failure.
The conflict is resolved by changing both driver's threaded interrupt
request function from IRQF_ONESHOT to IRQF_SHARED.
Signed-off-by: Grant B Adams <nemith592@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230823085430.6610-2-nemith592@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document the IPQ5018 dwc3 compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Link: https://lore.kernel.org/r/20230831030503.17100-1-quic_nsekar@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the module compression with xz so the in-kernel decompressor
   works

 - Document a kconfig idiom to express an optional dependency between
   modules

 - Make modpost, when W=1 is given, detect broken drivers that reference
   .exit.* sections

 - Remove unused code

* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove stale code for 'source' symlink in packaging scripts
  modpost: Don't let "driver"s reference .exit.*
  vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
  modpost: add missing else to the "of" check
  Documentation: kbuild: explain handling optional dependencies
  kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules

Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Fourteen hotfixes, eleven of which are cc:stable. The remainder
  pertain to issues which were introduced after 6.5"

* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  Crash: add lock to serialize crash hotplug handling
  selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
  mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
  mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
  mm, memcg: reconsider kmem.limit_in_bytes deprecation
  mm: zswap: fix potential memory corruption on duplicate store
  arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
  mm: hugetlb: add huge page size param to set_huge_pte_at()
  maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
  maple_tree: add mas_is_active() to detect in-tree walks
  nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
  mm: abstract moving to the next PFN
  mm: report success more often from filemap_map_folio_range()
  fs: binfmt_elf_efpic: fix personality for ELF-FDPIC

Pull misc driver fix from Greg KH:
 "Here is a single, much requested, fix for a set of misc drivers to
  resolve a much reported regression in the -rc series that has also
  propagated back to the stable releases. Sorry for the delay, lots of
  conference travel for a few weeks put me very far behind in patch
  wrangling.

  It has been reported by many to resolve the reported problem, and has
  been in linux-next with no reported issues"

* tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe

Pull tty / serial driver fixes from Greg KH:
 "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some
  reported regressions:

   - revert a n_gsm change that ended up causing problems

   - 8250_port fix for irq data

  both have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
  serial: 8250_port: Check IRQ data before use

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for
  AMD-derived Hygon processors, and fix a SGX kernel crash in the page
  fault handler that can trigger when ksgxd races to reclaim the SECS
  special page, by making the SECS page unswappable"

* tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
  x86/srso: Add SRSO mitigation for Hygon processors
  x86/kgdb: Fix a kerneldoc warning when build with W=1

Pull timer fix from Ingo Molnar:
 "Fix a spurious kernel warning during CPU hotplug events that may
  trigger when timer/hrtimer softirqs are pending, which are otherwise
  hotplug-safe and don't merit a warning"

* tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Tag (hr)timer softirq as hotplug safe

Pull scheduler fix from Ingo Molnar:
 "Fix a RT tasks related lockup/live-lock during CPU offlining"

* tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix live lock between select_fallback_rq() and RT push

Pull perf event fixes from Ingo Molnar:
 "Misc fixes: work around an AMD microcode bug on certain models, and
  fix kexec kernel PMI handlers on AMD systems that get loaded on older
  kernels that have an unexpected register state"

* tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd: Do not WARN() on every IRQ
  perf/x86/amd/core: Fix overflow reset on hotplug

Since commit d8131c29 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.

Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.

There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.

The dual rule that drivers must not reference .init.* is implemented
since commit 0db25245 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.

Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the left-over of commit e24f6628 ("modpost: remove all
traces of cpuinit/cpuexit sections").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.

Tested with allmodconfig before/after patch; no changes to *.mod.c:

    git checkout v6.6-rc3
    make -j$(nproc) allmodconfig
    make -j$(nproc) olddefconfig

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/before

    # apply patch

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/after

    diff -r /tmp/before/ /tmp/after/
    # no difference

Fixes: acbef7b7 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>