into kroah.com:/home/linux/linux/BK/gregkh-2.5

Since we killed off the broken 486 strings copies,
the config item isn't needed any longer.

Next in line for the -W cleanups is this patch from Willy
which I've been carrying since 2.5.29 or so. Should be no
functional differences, just no more warnings when we compile
with -W

s/boundry/boundary/

Without this fix, compiling with CONFIG_DEBUG_SPINLOCK
dies with an unknown variable error..

This looks extremely suspect to me, and seems like
it will prefetch past the end of the pmd, which is a no no.

Can't remember where this came from, but its been around
for quite a while. Prints the parent (tracer) pid if
its being traced.

The first of many...

From 2.4

Silly typo caused strange corruption.

With this fixed, agpgart almost works again on x86-64
(change_page_attr() seems broken there)

From 2.4

Cset 1.808 in 2.4 never got propagated forward to 2.5

It's pretty much the same fix as below (s/!=/</), but with the following
changes
 - This was a patch to pci_alloc_consistant(), which now wants to be
   dma_alloc_coherent()
 - Removal of the u32 cast

Missed forward port from 2.4. ACKed by GregKH

From 2.4

From 2.4, and munged.

From 2.4

Fix incorrect CONFIG_ name

From 2.4 a few months back. With a few edits by
myself to remove the wacky bits of the diff that
backed out fixes. (*Sigh*, Intel).

Been carrying this for ages..

From Jens Axboe:

   This is for changers, we may need more than the default
   5 second timeout for loading a disc since it may require
   moving stuff around :)

From Jens Axboe:

   Only fall back to plain READ, if the device says it doesn't
   support the READ_CD opcode. This is the true error for which
   we want to do the fall back, not for any generic error.

Missing macro header.

IBM memory key
Epson 785EPX PCMCIA slot
Konica KD-200Z camera

into kroah.com:/home/linux/linux/BK/gregkh-2.5

I got a PL2303 USB serial converter a few days ago, and got your driver
up and running fairly quickly.  The problem is that I got an oops when I
rmmod-ed the drivers.  The pl2303 uses two interfaces but registers only
the second (technically wrong, I guess, but should work).  When pl2303.o
is removed, it attempts to deregister the first interface (which has no
effect), so the second interface remains registered with usbserial.  The
old struct serial still points at the removed pl2303 driver so things go
pop when anything touches it.

I think the PL2303 hack in usb_serial_probe should not change the
"interface" variable, which gets stored in serial->interface, since
usbcore will register whatever "ifnum" says.  I think that's enough
waffle.  The patch is below.  Keep up the good work!

This updates the saa7134 driver.  It adds support for a few more cards
and includes adaptions to the video-buf.c changes sent earlier.

This has some i2c adaptions and cleanups for the tv card tuner module.

This updates a bunch of i2c modules in drivers/media/video.  Most of it
are adaptions to the recent i2c changes in the kernel.  While being at
it I also did some other cleanups like deleting unused+dead code, using
name-based initialization for some not-yet converted structs, ...

The also has a few small fixes here and there, but no major functional
changes.

This adds a driver module for the bt832 chip.  It is needed by the bttv
driver to support the Pixelview Digital Camera.  The bt832 is connected
using the GPIO pins of the bt878 chip.

This updates the bttv driver.  Changes:

 * adaptions to the video-buf changes send in a previous mail.
 * adaptions to recent i2c changes in the kernel.
 * first code bits the pixelview digital camera support (not
   working yet).
 * lots of small fixes/changes for specific TV cards.

This adds the v4l1-compat module.  This is a module which can translate
most (old) v4l1 ioctls into the new v4l2 API.  This makes it easier for
v4l2 drivers to present both old v4l and new v4l2 APIs to video4linux
applications.  The saa7134 driver uses this for example.

This updates the video-buf helper module.  It changes the field handling
a bit and adds code do deal better with alternating field capture (=
capture even and odd fields to separate video buffers).

This adds the tda9887 i2c module to the linux kernel.  This one is
needed for some TV cards.  It also adds the missing #define to
audiochip.h which currently breaks the bttv build.

Hi,

On Wed, Jan 08, 2003 at 08:29:36AM -0800, Greg KH wrote:
> On Tue, Dec 24, 2002 at 05:44:55PM +0100, Henning Meier-Geinitz wrote:
> > Hi,
> >
> > On Tue, Dec 24, 2002 at 12:40:06AM +0100, Oliver Neukum wrote:
> > >
> > > > Well, the reason I didn't use one was that I didn't found one in
> > > > usb.h/usb_ch9.h for 16. It's also not listed on www.usb.org.
> > > >
> > > > lsusb calls it "Data". However, I'm not sure if this is a hex/dec
> > > > error and they really mean "Data" = dec 10, not 0x10 (=dec 16).
> > > >
> > > > Shall I define a local symbolic name (e.g.
> > > > STRANGE_HP_SCANJET_INTERFACE_CLASS)? But I really don't know what this
> > > > class is. I only know that it's used by a Hewlett-Packard ScanJet
> > > > 3300c and Genius HR6 USB - Vivid III.
> > >
> > > Better that than a bare number.
> >
> > Patch attached.
>
> Applied to my 2.4 tree, sorry for the delay.

Here is the same for 2.5.44: