1. 12 Aug, 2011 21 commits
  2. 11 Aug, 2011 19 commits
    • Jeff Kirsher's avatar
      atl*: Move the Atheros drivers · 2b133ad6
      Jeff Kirsher authored
      Move the Atheros drivers into drivers/net/ethernet/atheros/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: Jay Cliburn <jcliburn@gmail.com>
      CC: Chris Snook <chris.snook@gmail.com>
      CC: Jie Yang <jie.yang@atheros.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      2b133ad6
    • Jeff Kirsher's avatar
      de6*/dl2k/sundance: Move the D-Link drivers · 3401299a
      Jeff Kirsher authored
      Move the D-Link drivers into drivers/net/ethernet/dlink/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: Bjorn Ekwall <bj0rn@blox.se>
      CC: Donald Becker <becker@scyld.com>
      CC: Edward Peng <edward_peng@dlink.com.tw>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      3401299a
    • Jeff Kirsher's avatar
      8139*/atp/r8169/sc92031: Move the Realtek drivers · a8fe65b8
      Jeff Kirsher authored
      Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
      the necessary Kconfig and Makefile changes.
      
      CC: Realtek linux nic maintainers <nic_swsd@realtek.com>
      CC: Francois Romieu <romieu@fr.zoreil.com>
      CC: Jeff Garzik <jgarzik@pobox.com>
      CC: Donald Becker <becker@scyld.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      a8fe65b8
    • Jeff Kirsher's avatar
      ftgmac100/ftmac100: Move the Faraday drivers · baf0fbfe
      Jeff Kirsher authored
      Move the Faraday driver into drivers/net/ethernet/faraday/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: "Po-Yu Chuang" <ratbert@faraday-tech.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Acked-by: default avatarPo-Yu Chuang <ratbert@faraday-tech.com>
      baf0fbfe
    • Jeff Kirsher's avatar
      xscale: Move the Intel XScale IXP drivers · b47da977
      Jeff Kirsher authored
      Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
      and make the necessary Kconfig and Makefile changes.
      
      CC: Krzysztof Halasa <khc@pm.waw.pl>
      CC: Lennert Buytenhek <kernel@wantstofly.org>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      b47da977
    • Jeff Kirsher's avatar
      *sonic/natsemi/ns83829: Move the National Semi-conductor drivers · d9fb9f38
      Jeff Kirsher authored
      Move the National Semi-conductor drivers into drivers/net/ethernet/natsemi/
      and make the necessary Kconfig and Makefile changes.  Also moved the 8390
      (National Semi-conductor) devices as a sub-menu of National Semi-conductor
      devices.
      
      - moved the ibmlana driver as well into this directory since it is a
        "SONIC" driver
      
      CC: Alfred Arnold <alfred.arnold@lancom.de>
      CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      CC: Harald Welte <laforge@gnumonks.org>
      CC: Tim Hockin <thockin@hockin.org>
      CC: <linux-ns83820@kvack.org>
      CC: Kevin Chea <kchea@yahoo.com>
      CC: Marc Gauthier <marc@linux-xtensa.org>
      CC: Chris Zankel <chris@zankel.net>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Acked-by: default avatarMarc Gauthier <marc@tensilica.com>
      d9fb9f38
    • Jeff Kirsher's avatar
      bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers · 8fb6b090
      Jeff Kirsher authored
      Move the Apple drivers into driver/net/ethernet/apple/ and make the
      necessary Kconfig and Makefile changes.
      
      CC: Paul Mackerras <paulus@samba.org>
      CC: Paul Mackerras <paulus@au.ibm.com>
      CC: Russell Nelson <nelson@crynwr.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      8fb6b090
    • Jeff Kirsher's avatar
      stmmac: Move the STMicroelectronics driver · 7ac6653a
      Jeff Kirsher authored
      Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: Giuseppe Cavallaro <peppe.cavallaro@st.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      7ac6653a
    • Jeff Kirsher's avatar
      tehuti: Move the Tehuti driver · ef7f5429
      Jeff Kirsher authored
      Move the Tehuti driver into drivers/net/ethernet/tehuti/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: Alexander Indenbaum <baum@tehutinetworks.net>
      CC: Andy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      ef7f5429
    • Jeff Kirsher's avatar
      pasemic_mac*: Move the PA Semi driver · ded19add
      Jeff Kirsher authored
      Move the PA Semi driver into drivers/net/ethernet/pasemi/ and
      make the necessary Kconfig and Makefile changes.
      
      CC: Olof Johansson <olof@lixom.net>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Acked-by: default avatarOlof Johansson <olof@lixom.net>
      ded19add
    • Jiri Pirko's avatar
      rtnetlink: remove initialization of dev->real_num_tx_queues · e7c379d2
      Jiri Pirko authored
      dev->real_num_tx_queues is correctly set already in alloc_netdev_mqs.
      Signed-off-by: default avatarJiri Pirko <jpirko@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e7c379d2
    • Jiri Pirko's avatar
      bonding: implement get_tx_queues rtnk_link_op · d5da4510
      Jiri Pirko authored
      If bonding device is created via rtnl, it is created with default number
      of rx/tx queues. This patch implements callback in bonding so the
      correct value (previously specified by bonding module param) is used.
      Signed-off-by: default avatarJiri Pirko <jpirko@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5da4510
    • Rasesh Mody's avatar
      bna: Driver Version changed to 3.0.2.0 · 5098af0a
      Rasesh Mody authored
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5098af0a
    • Rasesh Mody's avatar
      bna: Remove Obsolete Files · e827e326
      Rasesh Mody authored
      Change details:
       - Removec bfi_ll.h bna_hw.h bna_ctrl.c and bna_txrx.c due to ENET, MSGQ
         and TXRX changes for new FW Driver interface and TX RX re-design.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e827e326
    • Rasesh Mody's avatar
      bna: Remove Unused Code · f6d46a2e
      Rasesh Mody authored
      Remove unused code.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f6d46a2e
    • Rasesh Mody's avatar
      bna: ENET and Tx Rx Redesign Enablement · 078086f3
      Rasesh Mody authored
      Change details:
      This patch contains additional structure and function definition changes
      that are required to enable the new msgq/enet/txrx redesign introduced
      by the previous 4 patches.
       - structure and function definition changes to header files as a result
         of Ethport, Enet, IOCEth, Tx, Rx redesign.
       - ethtool changes to use new enet function and definitions
       - Set number of Tx and Rx queues bassed on underlying hardware. Define
         separate macros for maximum and supported numbers of Tx and Rx queues
         based on underlying hardware. Take VLAN header into account for MTU
         calculation. Default to INTx mode when pci_enable_msix() fails. Set a
         bit in Rx poll routine, check and wait for that bit to be cleared in
         the cleanup routine before proceeding.
       - The TX and Rx coalesce settings are programmed in steps of 5 us. The value
         that are not divisible by 5 are rounded to the next lower number. This was
         causing the value os 1 to 4 to be rounded to 0, which is an invalid setting.
         When creating Rx and Tx object, we are currently assigning the default
         values of Rx and Tx coalescing_timeo. If these values are changed in the
         driver to a different value, the change is lost during such operations as
         MTU change. In order to avoid that, pass the configured value of
         coalescing_timeo before Rx and Tx object creation. Fix
         bnad_tx_coalescing_timeo_set() so it applies to all the Tx objects.
       - Reorg uninitialization path in case of pci_probe failure.
       - Hardware clock setup changes to pass asic generation, port modes and
         asic mode as part firmware boot parameters to firmware.
       - FW mailbox interface changes to defined asic specific mailbox interfaces.
         h/w mailbox interfaces take 8-bit FIDs and 2-bit port id for owner. Cleaned
         up mailbox definitions and usage for new and old HW. Eliminated usage of
         ASIC ID. MSI-X vector assignment and programming done by firmware. Fixed
         host offsets for CPE/RME queue registers.
       - Implement polling mechanism for FW ready to have poll mechanism replaces
         the current interrupt based FW READY method. The timer based poll routine
         in IOC will query the ioc_fwstate register to see if there is a state
         change in FW, and sends the READY event. Removed infrastructure needed to
         support mbox READY event from fw as well as IOC code.
       - Move FW init to HW init. Handle the case where PCI mapping goes away when
         IOCPF state machine is waiting for semaphore.
       - Add IOC mbox call back to client indicating that the command is sent.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      078086f3
    • Rasesh Mody's avatar
      bna: Add New HW Defs · 6849c6b3
      Rasesh Mody authored
      Change details:
       - Add new file bna_hw_defs.h to support new code MSGQ, ENET and TX RX redign.
         This makes bna_hw.h obsolete and is removed in a later patch. bna_hw_defs.h
         removes all unused HW register definition that were part of bna_hw.h.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6849c6b3
    • Rasesh Mody's avatar
      bna: Tx and Rx Redesign · f3bd5173
      Rasesh Mody authored
      Change details:
       - This patch contains the changes as a result of redesigning of Tx, Rx data
         path setup. In the old design, setting up Txqs, Rxqs were done in the driver.
         With the new design, most of the hardware setup steps for the Txq, Rxqs are
         moved to FW. Host driver issues commands to FW through the message queue to
         setup/teardown tx, rx data path. FW performs necessary steps and responds
         back to the driver with a status.
       - As a result of this redesign, the state machine implementation for Tx, Rx
         objects have changed significantly. Instead of doing the raw register access,
         these state machines mostly send a command to FW and wait for response and
         take the next action. In addition to tx, rx datapath setup, this patch also
         deals with rx filter configuration - such as unicast address, multicast
         address, vlan filter, promiscuous mode etc.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3bd5173
    • Rasesh Mody's avatar
      bna: Introduce ENET as New Driver and FW Interface · 45979c1e
      Rasesh Mody authored
      Change details:
       - This patch contains the messages, opcodes and structure format for the
         messages and responses exchanged between driver and the FW. In addition
         this patch contains the state machine implementation for Ethport, Enet,
         IOCEth.
       - Ethport object is responsible for receiving link state events, sending
         port enable/disable commands to FW.
       - Enet object is responsible for synchronizing initialization/teardown of
         tx & rx datapath configuration.
       - IOCEth object is responsible for init/un-init of IO Controller in the
         adapter which runs the FW.
       - This patch also contains code for initialization and resource assignment
         for Ethport, Enet, IOCEth, Tx, Rx objects.
      Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45979c1e