Previously the build process would always set KBUILD_IMAGE to the
uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
unconditionally compress it into Image.gz. However there are already
build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
Image.zstd, so let's make use of those, make the compression method
configurable and set KBUILD_IMAGE accordingly so that targets like
'make install' and 'make bindeb-pkg' will use the chosen image.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-2-emil.renner.berthing@canonical.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Add byte/half-word compare-and-exchange, emulated via LR/SC loops

 - Support for Rust

 - Support for Zihintpause in hwprobe

 - Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()

 - Support lockless lockrefs

* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
  riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
  riscv: select ARCH_HAS_FAST_MULTIPLIER
  riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
  riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
  riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
  riscv: mm: Always use an ASID to flush mm contexts
  riscv: mm: Preserve global TLB entries when switching contexts
  riscv: mm: Make asid_bits a local variable
  riscv: mm: Use a fixed layout for the MM context ID
  riscv: mm: Introduce cntx2asid/cntx2version helper macros
  riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
  riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
  riscv: mm: Combine the SMP and UP TLB flush code
  riscv: Only send remote fences when some other CPU is online
  riscv: mm: Broadcast kernel TLB flushes only when needed
  riscv: Use IPIs for remote cache/TLB flushes by default
  riscv: Factor out page table TLB synchronization
  riscv: Flush the instruction cache during SMP bringup
  riscv: hwprobe: export Zihintpause ISA extension
  riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
  ...

Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Select some options in Kconfig

 - Give a chance to build with !CONFIG_SMP

 - Switch to use built-in rustc target

 - Add new supported device nodes to dts

 - Some bug fixes and other small changes

 - Update the default config file

* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Update Loongson-3 default config file
  LoongArch: dts: Add new supported device nodes to Loongson-2K2000
  LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  LoongArch: dts: Remove "disabled" state of clock controller node
  LoongArch: rust: Switch to use built-in rustc target
  LoongArch: Fix callchain parse error with kernel tracepoint events again
  LoongArch: Give a chance to build with !CONFIG_SMP
  LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
  LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
  LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
  LoongArch: Select ARCH_HAS_FAST_MULTIPLIER

Pull microblaze updates from Michal Simek:

 - Cleanup code around removed early_printk

* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove early printk call from cpuinfo-static.c
  microblaze: Remove gcc flag for non existing early_printk.c file

Pull overlayfs updates from Miklos Szeredi:

 - Add tmpfile support

 - Clean up include

* tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: remove duplicate included header
  ovl: remove upper umask handling from ovl_create_upper()
  ovl: implement tmpfile

Pull fuse updates from Miklos Szeredi:

 - Add fs-verity support (Richard Fung)

 - Add multi-queue support to virtio-fs (Peter-Jan Gootzen)

 - Fix a bug in NOTIFY_RESEND handling (Hou Tao)

 - page -> folio cleanup (Matthew Wilcox)

* tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  virtio-fs: add multi-queue support
  virtio-fs: limit number of request queues
  fuse: clear FR_SENT when re-adding requests into pending list
  fuse: set FR_PENDING atomically in fuse_resend()
  fuse: Add initial support for fs-verity
  fuse: Convert fuse_readpages_end() to use folio_end_read()

Our applications, built on Elasticsearch[0], frequently create and
delete files.  These applications operate within containers, some with a
memory limit exceeding 100GB.  Over prolonged periods, the accumulation
of negative dentries within these containers can amount to tens of
gigabytes.

Upon container exit, directories are deleted.  However, due to the
numerous associated dentries, this process can be time-consuming.  Our
users have expressed frustration with this prolonged exit duration,
which constitutes our first issue.

Simultaneously, other processes may attempt to access the parent
directory of the Elasticsearch directories.  Since the task responsible
for deleting the dentries holds the inode lock, processes attempting
directory lookup experience significant delays.  This issue, our second
problem, is easily demonstrated:

  - Task 1 generates negative dentries:
  $ pwd
  ~/test
  $ mkdir es && cd es/ && ./create_and_delete_files.sh

  [ After generating tens of GB dentries ]

  $ cd ~/test && rm -rf es

  [ It will take a long duration to finish ]

  - Task 2 attempts to lookup the 'test/' directory
  $ pwd
  ~/test
  $ ls

  The 'ls' command in Task 2 experiences prolonged execution as Task 1
  is deleting the dentries.

We've devised a solution to address both issues by deleting associated
dentry when removing a file.  Interestingly, we've noted that a similar
patch was proposed years ago[1], although it was rejected citing the
absence of tangible issues caused by negative dentries.  Given our
current challenges, we're resubmitting the proposal.  All relevant
stakeholders from previous discussions have been included for reference.

Some alternative solutions are also under discussion[2][3], such as
shrinking child dentries outside of the parent inode lock or even
asynchronously shrinking child dentries.  However, given the
straightforward nature of the current solution, I believe this approach
is still necessary.

[ NOTE! This is a pretty fundamental change in how we deal with
  unlinking dentries, and it doesn't change the fact that you can have
  lots of negative dentries from just doing negative lookups.

  But the kernel test robot is at least initially happy with this from a
  performance angle, so I'm applying this ASAP just to get more testing
  and as a "known fix for an issue people hit in real life".

  Put another way: we should still look at the alternatives, and this
  patch may get reverted if somebody finds a performance regression on
  some other load.       - Linus ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://github.com/elastic/elasticsearch [0]
Link: https://patchwork.kernel.org/project/linux-fsdevel/patch/1502099673-31620-1-git-send-email-wangkai86@huawei.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20240511200240.6354-2-torvalds@linux-foundation.org/ [2]
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wjEMf8Du4UFzxuToGDnF3yLaMcrYeyNAaH1NJWa6fwcNQ@mail.gmail.com/ [3]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Wangkai <wangkai86@huawei.com>
Cc: Colin Walters <walters@verbum.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/202405221518.ecea2810-oliver.sang@intel.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "General:

   - Integrate the shellcheck utility with the build of perf to allow
     catching shell problems early in areas such as 'perf test', 'perf
     trace' scrape scripts, etc

   - Add 'uretprobe' variant in the 'perf bench uprobe' tool

   - Add script to run instances of 'perf script' in parallel

   - Allow parsing tracepoint names that start with digits, such as
     9p/9p_client_req, etc. Make sure 'perf test' tests it even on
     systems where those tracepoints aren't available

   - Add Kan Liang to MAINTAINERS as a perf tools reviewer

   - Add support for using the 'capstone' disassembler library in
     various tools, such as 'perf script' and 'perf annotate'. This is
     an alternative for the use of the 'xed' and 'objdump' disassemblers

  Data-type profiling improvements:

   - Resolve types for a->b->c by backtracking the assignments until it
     finds DWARF info for one of those members

   - Support for global variables, keeping a cache to speed up lookups

   - Handle the 'call' instruction, dealing with effects on registers
     and handling its return when tracking register data types

   - Handle x86's segment based addressing like %gs:0x28, to support
     things like per CPU variables, the stack canary, etc

   - Data-type profiling got big speedups when using capstone for
     disassembling. The objdump outoput parsing method is left as a
     fallback when capstone fails or isn't available. There are patches
     posted for 6.11 that to use a LLVM disassembler

   - Support event group display in the TUI when annotating types with
     --data-type, for instance to show memory load and store events for
     the data type fields

   - Optimize the 'perf annotate' data structures, reducing memory usage

   - Add a initial 'perf test' for 'perf annotate', checking that a
     target symbol appears on the output, specifying objdump via the
     command line, etc

  Vendor Events:

   - Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
     Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
     Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
     erroneously in TopdownL1

   - Add AMD's Zen 5 core and uncore events and metrics. Those come from
     the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
     Processors" document, with events that capture information on op
     dispatch, execution and retirement, branch prediction, L1 and L2
     cache activity, TLB activity, etc

   - Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
     AmpereOneX

  Miscellaneous:

   - Sync header copies with the kernel sources

   - Move some header copies used only for generating translation string
     tables for ioctl cmds and other syscall integer arguments to a new
     directory under tools/perf/beauty/, to separate from copies in
     tools/include/ that are used to build the tools

   - Introduce scrape script for several syscall 'flags'/'mask'
     arguments

   - Improve cpumap utilization, fixing up pairing of refcounts, using
     the right iterators (perf_cpu_map__for_each_cpu), etc

   - Give more details about raw event encodings in 'perf list', show
     tracepoint encoding in the detailed output

   - Refactor the DSOs handling code, reducing memory usage

   - Document the BPF event modifier and add a 'perf test' for it

   - Improve the event parser, better error messages and add further
     'perf test's for it

   - Add reference count checking to 'struct comm_str' and 'struct
     mem_info'

   - Make ARM64's 'perf test' entries for the Neoverse N1 more robust

   - Tweak the ARM64's Coresight 'perf test's

   - Improve ARM64's CoreSight ETM version detection and error reporting

   - Fix handling of symbols when using kcore

   - Fix PAI (Processor Activity Instrumentation) counter names for s390
     virtual machines in 'perf report'

   - Fix -g/--call-graph option failure in 'perf sched timehist'

   - Add LIBTRACEEVENT_DIR build option to allow building with
     libtraceevent installed in non-standard directories, such as when
     doing cross builds

   - Various 'perf test' and 'perf bench' fixes

   - Improve 'perf probe' error message for long C++ probe names"

* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
  tools lib subcmd: Show parent options in help
  perf pmu: Count sys and cpuid JSON events separately
  perf stat: Don't display metric header for non-leader uncore events
  perf annotate-data: Ensure the number of type histograms
  perf annotate: Fix segfault on sample histogram
  perf daemon: Fix file leak in daemon_session__control
  libsubcmd: Fix parse-options memory leak
  perf lock: Avoid memory leaks from strdup()
  perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
  perf tools: Ignore deleted cgroups
  perf parse: Allow tracepoint names to start with digits
  perf parse-events: Add new 'fake_tp' parameter for tests
  perf parse-events: pass parse_state to add_tracepoint
  perf symbols: Fix ownership of string in dso__load_vmlinux()
  perf symbols: Update kcore map before merging in remaining symbols
  perf maps: Re-use __maps__free_maps_by_name()
  perf symbols: Remove map from list before updating addresses
  perf tracepoint: Don't scan all tracepoints to test if one exists
  perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
  perf thread: Fixes to thread__new() related to initializing comm
  ...

Pull bitmap updates from Yury Norov:

 - topology_span_sane() optimization from Kyle Meyer

 - fns() rework from Kuan-Wei Chiu (used in cpumask_local_spread() and
   other places)

 - headers cleanup from Andy

 - add a MAINTAINERS record for bitops API

* tag 'bitmap-for-6.10v2' of https://github.com/norov/linux:
  usercopy: Don't use "proxy" headers
  bitops: Move aligned_byte_mask() to wordpart.h
  MAINTAINERS: add BITOPS API record
  bitmap: relax find_nth_bit() limitation on return value
  lib: make test_bitops compilable into the kernel image
  bitops: Optimize fns() for improved performance
  lib/test_bitops: Add benchmark test for fns()
  Compiler Attributes: Add __always_used macro
  sched/topology: Optimize topology_span_sane()
  cpumask: Add for_each_cpu_from()

Pull misc vfs updates from Al Viro:
 "Assorted commits that had missed the last merge window..."

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove call_{read,write}_iter() functions
  do_dentry_open(): kill inode argument
  kernel_file_open(): get rid of inode argument
  get_file_rcu(): no need to check for NULL separately
  fd_is_open(): move to fs/file.c
  close_on_exec(): pass files_struct instead of fdtable

Pull bdev flags update from Al Viro:
 "Compactifying bdev flags.

  We can easily have up to 24 flags with sane atomicity, _without_
  pushing anything out of the first cacheline of struct block_device"

* tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bdev: move ->bd_make_it_fail to ->__bd_flags
  bdev: move ->bd_ro_warned to ->__bd_flags
  bdev: move ->bd_has_subit_bio to ->__bd_flags
  bdev: move ->bd_write_holder into ->__bd_flags
  bdev: move ->bd_read_only to ->__bd_flags
  bdev: infrastructure for flags
  wrapper for access to ->bd_partno
  Use bdev_is_paritition() instead of open-coding it

Pull more s390 updates from Alexander Gordeev:

 - Switch read and write software bits for PUDs

 - Add missing hardware bits for PUDs and PMDs

 - Generate unwind information for C modules to fix GDB unwind error for
   vDSO functions

 - Create .build-id links for unstripped vDSO files to enable vDSO
   debugging with symbols

 - Use standard stack frame layout for vDSO generated stack frames to
   manually walk stack frames without DWARF information

 - Rework perf_callchain_user() and arch_stack_walk_user() functions to
   reduce code duplication

 - Skip first stack frame when walking user stack

 - Add basic checks to identify invalid instruction pointers when
   walking stack frames

 - Introduce and use struct stack_frame_vdso_wrapper within vDSO user
   wrapper code to automatically generate an asm-offset define. Also use
   STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
   that the code works with user space stack

 - Clear the backchain of the extra stack frame added by the vDSO user
   wrapper code. This allows the user stack walker to detect and skip
   the non-standard stack frame. Without this an incorrect instruction
   pointer would be added to stack traces.

 - Rewrite psw_idle() function in C to ease maintenance and further
   enhancements

 - Remove get_vtimer() function and use get_cpu_timer() instead

 - Mark psw variable in __load_psw_mask() as __unitialized to avoid
   superfluous clearing of PSW

 - Remove obsolete and superfluous comment about removed TIF_FPU flag

 - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
   warnings reported by Coccinelle

 - Wipe sensitive data and all copies of protected- or secure-keys from
   stack when an IOCTL fails

 - Both do_airq_interrupt() and do_io_interrupt() functions set
   CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code

 - Provide iucv_alloc_device() and iucv_release_device() helpers, which
   can be used to deduplicate more or less identical IUCV device
   allocation and release code in four different drivers

 - Make use of iucv_alloc_device() and iucv_release_device() helpers to
   get rid of quite some code and also remove a cast to an incompatible
   function (clang W=1)

 - There is no user of iucv_root outside of the core IUCV code left.
   Therefore remove the EXPORT_SYMBOL

 - __apply_alternatives() contains a runtime check which verifies that
   the size of the to be patched code area is even. Convert this to a
   compile time check

 - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
   from 128 to 240

 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
   allowed

 - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
   IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
   block on 'scp_data' sysfs attribute update

 - Initialize the correct fields of the NVMe dump block, which were
   confused with FCP fields

 - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
   code duplication

 - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
   as dumpconf passing additional kernel command line parameters to a
   stand-alone dumper

 - Rework the CPACF query functions to use the correct RRE or RRF
   instruction formats and set instruction register fields correctly

 - Instead of calling BUG() at runtime force a link error during compile
   when a unsupported opcode is used with __cpacf_query() or
   __cpacf_check_opcode() functions

 - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
   or /sys/bus/ap/aqmask sysfs file update with a relative mask value

 - Fix "bindings complete" udev event which should be sent once all AP
   devices have been bound to device drivers and again when unbind/bind
   actions take place and all AP devices are bound again

 - Facility list alt_stfle_fac_list is nowhere used in the decompressor,
   therefore remove it there

 - Remove custom kprobes insn slot allocator in favour of the standard
   module_alloc() one, since kernel image and module areas are located
   within 4GB

 - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
   calling memset() with a large byte count and get rid of the sparse
   warning as result

* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
  s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
  s390/kprobes: Remove custom insn slot allocator
  s390/boot: Remove alt_stfle_fac_list from decompressor
  s390/ap: Fix bind complete udev event sent after each AP bus scan
  s390/ap: Fix crash in AP internal function modify_bitmap()
  s390/cpacf: Make use of invalid opcode produce a link error
  s390/cpacf: Split and rework cpacf query functions
  s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
  s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
  s390/ipl: Fix incorrect initialization of nvme dump block
  s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
  s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
  s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
  s390/alternatives: Convert runtime sanity check into compile time check
  s390/iucv: Unexport iucv_root
  tty: hvc-iucv: Make use of iucv_alloc_device()
  s390/smsgiucv_app: Make use of iucv_alloc_device()
  s390/netiucv: Make use of iucv_alloc_device()
  s390/vmlogrdr: Make use of iucv_alloc_device()
  s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
  ...

Pull m68knommu update from Greg Ungerer:

 . remove use of kernel config option from uapi header

* tag 'm68knommu-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Avoid CONFIG_COLDFIRE switch in uapi header

Pull EFI fix from Ard Biesheuvel:

 - Followup fix for the EFI boot sequence refactor, which may result in
   physical KASLR putting the kernel in a region which is being used for
   a special purpose via a command line argument.

* tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Omit physical KASLR when memory reservations exist

Merge tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM discard regressions due to DM core switching over to using
   queue_limits_set() without DM core and targets first being updated to
   set (and stack) discard limits in terms of max_hw_discard_sectors and
   not max_discard_sectors

 - Fix stable@ DM integrity discard support to set device's
   discard_granularity limit to the device's logical block size

* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: always manage discard support in terms of max_hw_discard_sectors
  dm-integrity: set discard_granularity to logical block size

Pull power management fixes from Rafael Wysocki:
 "These fix the amd-pstate driver and the operating performance point
  (OPP) handling related to generic PM domains.

  Specifics:

   - Fix a memory leak in the exit path of amd-pstate (Peng Ma)

   - Fix required_opp_tables handling in the cases when multiple generic
     PM domains share one OPP table (Viresh Kumar)"

* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  OPP: Fix required_opp_tables for multiple genpds using same table
  cpufreq: amd-pstate: fix memory leak on CPU EPP exit

Pull ACPI fixes from Rafael Wysocki:
 "These make the ACPI EC driver always install the EC address space
  handler at the root of the ACPI namespace which causes it to take care
  of all EC operation regions everywhere.

  This means that the custom EC address space handler in the WMI driver
  is not needed any more and accordingly it gets removed altogether"

* tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86: wmi: Remove custom EC address space handler
  ACPI: EC: Install address space handler at the namespace root

Pull thermal control fixes from Rafael Wysocki:
 "These fix the MediaTek lvts_thermal driver and the handling of trip
  points that start as invalid and are adjusted later by user space via
  sysfs.

  Specifics:

   - Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)

   - Prevent invalid trip point handling from triggering spurious trip
     point crossing events and allow passive polling to stop when a
     passive trip point involved in it becomes invalid (Rafael Wysocki)"

* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Fix the handling of invalid trip points
  thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
  thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
  thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data

Merge tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel

Pull intel-gpio fixes from Andy Shevchenko:

 - NULL pointer dereference fix in GPIO APCI library

 - Restore ACPI handle matching for GPIO devices represented in banks

* tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel:
  gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match
  gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()

Pull soundwire updates from Vinod Koul:

 - cleanup and conversion for soundwire sysfs groups

 - intel support for ace2x bits, auxdevice pm improvements

 - qcom multi link device support

* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
  soundwire: intel_ace2.x: add support for DOAISE property
  soundwire: intel_ace2.x: add support for DODSE property
  soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
  soundwire: intel_ace2x: cleanup DOAIS/DODS settings
  soundwire: intel_ace2x: simplify check_wake()
  soundwire: intel_ace2x: fix wakeup handling
  soundwire: intel_init: resume all devices on exit.
  soundwire: intel: export intel_resume_child_device
  soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
  ASoC: SOF: Intel: hda: disable SoundWire interrupt later
  soundwire: qcom: allow multi-link on newer devices
  soundwire: intel_ace2x: use legacy formula for intel_alh_id
  soundwire: reconcile dp0_prop and dpn_prop
  soundwire: intel_ace2x: set the clock source
  soundwire: intel_ace2.x: power-up first before setting SYNCPRD
  soundwire: intel_ace2x: move and extend clock selection
  soundwire: intel: add support for MeteorLake additional clocks
  soundwire: intel: add more values for SYNCPRD
  soundwire: bus: extend base clock checks to 96 MHz
  soundwire: cadence: show the bus frequency and frame shape
  ...

Pull generic phy updates from Vinod Koul:
 "New HW Support:
   - Support for Embedded DisplayPort and DisplayPort submodes and
     driver support on Qualcomm X1E80100 edp driver
   - Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
     and eusb2-repeater for SMB2360
   - Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
   - Mediatek XFI T-PHY support for mt7988
   - Rockchip usbdp combo phy driver

  Updates:
   - Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
     X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
     swing tables
   - Freescale imx8m-pci pcie link-up updates
   - Rockchip rx-common-refclk-mode support
   - More platform remove callback returning void conversions"

* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
  phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
  dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
  phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
  phy: samsung-ufs: ufs: exit on first reported error
  phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
  phy: rockchip: fix CONFIG_TYPEC dependency
  phy: rockchip: usbdp: fix uninitialized variable
  phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
  dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
  phy: rockchip: add usbdp combo phy driver
  dt-bindings: phy: add rockchip usbdp combo phy document
  phy: add driver for MediaTek XFI T-PHY
  dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
  phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
  phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
  MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
  ...

Pull dmaengine updates from Vinod Koul:
 "New HW support:
   - Freescale i.MX8ULP edma support in edma driver
   - StarFive JH8100 DMA support in Synopsis axi-dmac driver

  Updates:
   - Tracing support for freescale edma driver, updates to dpaa2 driver
   - Remove unused QCom hidma DT support
   - Support for i2c dma in imx-sdma
   - Maintainers update for idxd and edma drivers"

* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
  MAINTAINERS: Update role for IDXD driver
  dmaengine: fsl-edma: use _Generic to handle difference type
  dmaengine: fsl-edma: add trace event support
  dmaengine: idxd: Avoid unnecessary destruction of file_ida
  dmaengine: xilinx: xdma: fix module autoloading
  dt-bindings: dma: fsl-edma: allow 'power-domains' property
  dt-bindings: dma: fsl-edma: remove 'clocks' from required
  dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
  dmaengine: imx-sdma: Add i2c dma support
  dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
  dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
  dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
  dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
  dt-bindings: dma: Drop unused QCom hidma binding
  dmaengine: qcom: Drop hidma DT support
  dmaengine: pl08x: Use kcalloc() instead of kzalloc()
  dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
  dmaengine: fsl-edma: fix miss mutex unlock at an error return path
  dmaengine: pch_dma: remove unused function chan2parent
  dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
  ...

Pull mailbox updates from Jassi Brar:

 - redo the omap driver from legacy to mailbox api

 - enable bufferless IPI for zynqmp

 - add mhu-v3 driver

 - convert from tasklet to BH workqueue

 - add qcom MSM8974 APCS compatible IDs

* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
  dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
  dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
  mailbox: Convert from tasklet to BH workqueue
  mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
  mailbox: mtk-cmdq-mailbox: fix module autoloading
  mailbox: zynqmp: handle SGI for shared IPI
  mailbox: arm_mhuv3: Add driver
  dt-bindings: mailbox: arm,mhuv3: Add bindings
  mailbox: omap: Remove kernel FIFO message queuing
  mailbox: omap: Reverse FIFO busy check logic
  mailbox: omap: Remove mbox_chan_to_omap_mbox()
  mailbox: omap: Use mbox_controller channel list directly
  mailbox: omap: Use function local struct mbox_controller
  mailbox: omap: Merge mailbox child node setup loops
  mailbox: omap: Use devm_pm_runtime_enable() helper
  mailbox: omap: Remove device class
  mailbox: omap: Remove unneeded header omap-mailbox.h
  mailbox: omap: Move fifo size check to point of use
  mailbox: omap: Move omap_mbox_irq_t into driver
  mailbox: omap: Remove unused omap_mbox_request_channel() function
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This makes the remoteproc core rproc_class const.

  DeviceTree bindings for a few different Qualcomm remoteprocs are
  updated to remove a range of validation warnings/errors. The Qualcomm
  SMD binding marks qcom,ipc deprecated, in favor or the mailbox
  interface.

  The TI K3 R5 remoteproc driver is updated to ensure that cores are
  powered up in the appropriate order. The driver also see a couple of
  fixes related to cleanups in error paths during probe.

  The Mediatek remoteproc driver is extended to support the MT8188 SCP
  core 1. Support for varying DRAM and IPI shared buffer sizes are
  introduced. This together with a couple of bug fixes and improvements
  to the driver.

  Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
  Coredump support and support for parsing TCM information from
  DeviceTree is added to the Xilinx R5F remoteproc driver"

* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
  dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
  dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
  remoteproc: k3-r5: Jump to error handling labels in start/stop errors
  remoteproc: mediatek: Fix error code in scp_rproc_init()
  remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
  remoteproc: k3-r5: Wait for core0 power-up before powering up core1
  remoteproc: mediatek: Add IMGSYS IPI command
  remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
  remoteproc: mediatek: Support MT8188 SCP core 1
  dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
  drivers: remoteproc: xlnx: Fix uninitialized tcm mode
  drivers: remoteproc: xlnx: Fix uninitialized variable use
  drivers: remoteproc: xlnx: Add Versal and Versal-NET support
  remoteproc: zynqmp: parse TCM from device tree
  dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
  remoteproc: zynqmp: fix lockstep mode memory region
  remoteproc: zynqmp: Add coredump support
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This makes core rpmsg_class const and ensures that the automatic
  module loading of the Qualcomm glink_ssr driver happens"

* tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: qcom_glink_ssr: fix module autoloading
  rpmsg: core: Make rpmsg_class constant

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...

Merge tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull trusted keys fixes from Jarkko Sakkinen:
 "These are two bugs I found from trusted keys while working on a new
  RSA key type for TPM2. Both originate form v5.13.

  The memory leak is more crucial but I don't think it is either good
  idea if kernel throws WARN when ASN.1 parser fails, even if it is
  related to programming error, as it is not that mature code yet.

  There's at least two WARN's in that code but I picked just the one
  more likely to trigger. Planning to fix the other one too over time"

* tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: Do not use WARN when encode fails
  KEYS: trusted: Fix memory leak in tpm2_key_encode()

Pull bdev bd_inode updates from Al Viro:
 "Replacement of bdev->bd_inode with sane(r) set of primitives by me and
  Yu Kuai"

* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RIP ->bd_inode
  dasd_format(): killing the last remaining user of ->bd_inode
  nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
  block/bdev.c: use the knowledge of inode/bdev coallocation
  gfs2: more obvious initializations of mapping->host
  fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
  blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
  grow_dev_folio(): we only want ->bd_inode->i_mapping there
  use ->bd_mapping instead of ->bd_inode->i_mapping
  block_device: add a pointer to struct address_space (page cache of bdev)
  missing helpers: bdev_unhash(), bdev_drop()
  block: move two helpers into bdev.c
  block2mtd: prevent direct access of bd_inode
  dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
  blkdev_write_iter(): saner way to get inode and bdev
  bcachefs: remove dead function bdev_sectors()
  ext4: remove block_device_ejected()
  erofs_buf: store address_space instead of inode
  erofs: switch erofs_bread() to passing offset instead of block number

Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.

However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().

gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
			       struct dwapb_port_property *pp,
			       unsigned int offs);
port->gc.fwnode = pp->fwnode;

693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);

When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.

Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.

Fixes: 5062e4c1 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1e ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull vfs blocksize updates from Al Viro:
 "This gets rid of bogus set_blocksize() uses, switches it over
  to be based on a 'struct file *' and verifies that the caller
  has the device opened exclusively"

* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make set_blocksize() fail unless block device is opened exclusive
  set_blocksize(): switch to passing struct file *
  btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
  swsusp: don't bother with setting block size
  zram: don't bother with reopening - just use O_EXCL for open
  swapon(2): open swap with O_EXCL
  swapon(2)/swapoff(2): don't bother with block size
  pktcdvd: sort set_blocksize() calls out
  bcache_register(): don't bother with set_blocksize()

Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pidfs started using much saner inodes in commit b28ddcc3 ("pidfs:
convert to path_from_stashed() helper"), but that exposed the fact that
lsof had some knowledge of just how odd our old anon_inode usage was.

For example, legacy anon_inodes hadn't even initialized the inode type
in the inode mode, so everything had a type of zero.

So sane tools like 'stat' would report these files as "weird file", but
'lsof' instead used that (together with the name of the link in proc) to
notice that it's an anonymous inode, and used it to detect pidfd files.

Let's keep our internal new sane inode model, but mask the file type
bits at 'stat()' time in the getattr() function we already have, and by
making the dentry name match what lsof expects too.

This keeps our internal models sane, but should make user space see the
same old odd behavior.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a15b1050-4b52-4740-a122-a4d055c17f11@kernel.org/
Link: https://github.com/lsof-org/lsof/issues/317
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seth Forshee <sforshee@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge an amd-pstate driver fix for 6.10-rc1:

 - Fix a memory leak in the exit path of amd-pstate (Peng Ma).

* pm-cpufreq:
  cpufreq: amd-pstate: fix memory leak on CPU EPP exit

When asn1_encode_sequence() fails, WARN is not the correct solution.

1. asn1_encode_sequence() is not an internal function (located
   in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.

It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.

Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.

Cc: stable@vger.kernel.org # v5.13+
Fixes: f2219745 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.

Cc: stable@vger.kernel.org # +v5.13
Fixes: f2219745 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull coccinelle updates from Julia Lawall:
 "One patch slightly improves the text in a comment.

  The other patch (on minmax.cocci) removes a report about ? being used
  in return statements that has been generating not very useful
  suggestions to change idiomatic code"

* tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  Coccinelle: pm_runtime: Fix grammar in comment
  coccinelle: misc: minmax: Suppress reports for err returns

Pull asm-generic cleanups from Arnd Bergmann:
 "These are a few cross-architecture cleanup patches:

   - separate out fbdev support from the asm/video.h contents that may
     be used by either the old fbdev drivers or the newer drm display
     code (Thomas Zimmermann)

   - cleanups for the generic bitops code and asm-generic/bug.h
     (Thorsten Blum)

   - remove the orphaned include/asm-generic/page.h header that used to
     be included by long-removed mmu-less architectures (me)"

* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: Fix name collision with ACPI's video.o
  bug: Improve comment
  asm-generic: remove unused asm-generic/page.h
  arch: Rename fbdev header and source files
  arch: Remove struct fb_info from video helpers
  arch: Select fbdev helpers with CONFIG_VIDEO
  bitops: Change function return types from long to int

Pull more SoC devicetree updates from Arnd Bergmann:
 "This is a follow-up to an earlier pull request for device tree
  changes, as three platform maintainers sent their contents too late to
  be included in the main set, but had not caused any further problems
  since then:

   - The Amlogic platform now containts support for two new SoC types,
     the A4 and A5 chips for audio applications. Both come with a
     reference board, and one more dts file gets addded for the
     combination of the MNT Reform Laptop with the BPI-CM4 CPU module

   - The ASpeed platform adds support for six addititional server
     platforms that use ast2500 or ast2600 as their BMC, while another
     one gets removed

   - The RISC-V platforms from Microchip, Starfive and and T-HEAD get
     additional features for existing hardware, plus the addition of the
     Milk-V Mars based on the StarFive VisionFive v2 board"

* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
  riscv: dts: microchip: add pac1934 power-monitor to icicle
  riscv: dts: thead: Fix node ordering in TH1520 device tree
  ARM: dts: aspeed: Add ASRock E3C256D4I BMC
  dt-bindings: arm: aspeed: document ASRock E3C256D4I
  dt-bindings: trivial-devices: add isil,isl69269
  ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
  dt-bindings: arm: aspeed: add ASUS X4TF board
  ARM: dts: aspeed: Remove Facebook Cloudripper dts
  ARM: dts: aspeed: drop unused ref_voltage ADC property
  ARM: dts: aspeed: harma: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
  ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
  ARM: dts: aspeed: Modify I2C bus configuration
  ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
  ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
  ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
  ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
  ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
  ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
  ...

Pull vfio updates from Alex Williamson:

 - The vfio fsl-mc bus driver has become orphaned. We'll consider
   removing it in future releases if a new maintainer isn't found (Alex
   Williamson)

 - Improved usage of opaque data in vfio-pci INTx handling, avoiding
   lookups of the eventfd through the interrupt and irqfd runtime paths
   (Alex Williamson)

 - Resolve an error path memory leak introduced in vfio-pci interrupt
   code (Ye Bin)

 - Addition of interrupt support for vfio devices exposed on the CDX
   bus, including a new MSI allocation helper and export of existing
   helpers for MSI alloc and free (Nipun Gupta)

 - A new vfio-pci variant driver supporting migration of Intel QAT VF
   devices for the GEN4 PFs (Xin Zeng & Yahui Cao)

 - Resolve a possibly circular locking dependency in vfio-pci by
   avoiding copy_to_user() from a PCI bus walk callback (Alex
   Williamson)

 - Trivial docs update to remove a duplicate semicolon (Foryun Ma)

* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Restore zero affected bus reset devices warning
  vfio: remove an extra semicolon
  vfio/pci: Collect hot-reset devices to local buffer
  vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
  vfio/cdx: add interrupt support
  genirq/msi: Add MSI allocation helper and export MSI functions
  vfio/pci: fix potential memory leak in vfio_intx_enable()
  vfio/pci: Pass eventfd context object through irqfd
  vfio/pci: Pass eventfd context to IRQ handler
  MAINTAINERS: Orphan vfio fsl-mc bus driver

Merge tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to
  Makefile, lib.mk, and kselftest_harness.h and follow-on changes to
  cgroup and sgx test as they are causing build failures and warnings"

* tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Revert "selftests/cgroup: Drop define _GNU_SOURCE"
  Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile"
  Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"