- 07 Nov, 2011 29 commits
-
-
Manual Munz authored
commit 8c23516f upstream. In ad-hoc mode, driver b43 does not issue beacons. Signed-off-by:
Manual Munz <freifunk@somakoma.de> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jeff Layton authored
commit 9438fabb upstream. The name_len variable in CIFSFindNext is a signed int that gets set to the resume_name_len in the cifs_search_info. The resume_name_len however is unsigned and for some infolevels is populated directly from a 32 bit value sent by the server. If the server sends a very large value for this, then that value could look negative when converted to a signed int. That would make that value pass the PATH_MAX check later in CIFSFindNext. The name_len would then be used as a length value for a memcpy. It would then be treated as unsigned again, and the memcpy scribbles over a ton of memory. Fix this by making the name_len an unsigned value in CIFSFindNext. Reported-by:
Darren Lavender <dcl@hppine99.gbr.hp.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
David Henningsson authored
commit 2e1210bc upstream. This patch fixes "Surround Speaker Playback Volume" being cut off. (Commit b4dabfc4 was probably meant to fix this, but it fixed only the "Switch" name, not the "Volume" name.) Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mark Brown authored
commit 747da0f8 upstream. We need to report the entire jack state to the core jack code, not just the bits that were being updated by the caller, otherwise the status reported by other detection methods will be omitted from the state seen by userspace. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
Jeff Kirsher authored
commit e2faeec2 upstream. The checksum field in the EEPROM on HPPA is really not a checksum but a signature (0x16d6). So allow 0x16d6 as the matching checksum on HPPA systems. This issue is present on longterm/stable kernels, I have verified that this patch is applicable back to at least 2.6.32.y kernels. v2- changed ifdef to use CONFIG_PARISC instead of __hppa__ CC: Guy Martin <gmsoft@tuxicoman.be> CC: Rolf Eike Beer <eike-kernel@sf-tec.de> CC: Matt Turner <mattst88@gmail.com> Reported-by:
Mikulas Patocka <mikulas@artax.kerlin.mff.cuni.cz> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Vasquez authored
commit 58b48576 upstream. Transitioning to a LOOP_UPDATE loop-state could cause the driver to miss normal link/target processing. LOOP_UPDATE is a crufty artifact leftover from at time the driver performed it's own internal command-queuing. Safely remove this state. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Randy Dunlap authored
commit f470e5ae upstream. Fix section mismatch warning: WARNING: drivers/net/irda/smsc-ircc2.o(.devinit.text+0x1a7): Section mismatch in reference from the function smsc_ircc_pnp_probe() to the function .init.text:smsc_ircc_open() Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Venkateswararao Jujjuri (JV) authored
commit c9ffb05c upstream. msize represents the maximum PDU size that includes P9_IOHDRSZ. Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 5034990e upstream. free the fid even in case of failed clunk. Signed-off-by:
-
Eric Van Hensbergen authored
commit b85f7d92 upstream. There was a BUG_ON to protect against a bad id which could be dealt with more gracefully. Reported-by:
Natalie Orlin <norlin@us.ibm.com> Signed-off-by:
-
NeilBrown authored
commit 27a7b260 upstream. 0.90 metadata uses an unsigned 32bit number to count the number of kilobytes used from each device. This should allow up to 4TB per device. However we multiply this by 2 (to get sectors) before casting to a larger type, so sizes above 2TB get truncated. Also we allow rdev->sectors to be larger than 4TB, so it is possible for the array to be resized larger than the metadata can handle. So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in used. Also the sanity check at the end of super_90_load should include level 1 as it used ->size too. (RAID0 and Linear don't use ->size at all). Reported-by:
Pim Zandbergen <P.Zandbergen@macroscoop.nl> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Sudhakar Rajashekhara authored
commit 810198bc upstream. DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data. This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device. NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it. [1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash Modifications in v2: Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0. Modifications in v3: a. Guarded da850_evm_m25p80_notify_add() function and da850evm_spi_notifier structure with CONFIG_MTD macros. b. Renamed da850_evm_register_mtd_user() function to da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function. c. Passed the da850evm_spi_notifier structure to register_mtd_user() function. Modifications in v4: Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct. Signed-off-by:
Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit ed467e69 upstream. We have hit a couple of customer bugs where they would like to use those parameters to run an UP kernel - but both of those options turn of important sources of interrupt information so we end up not being able to boot. The correct way is to pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and the kernel will patch itself to be a UP kernel. Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308Acked-by:
Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Igor Mammedov authored
commit d198d499 upstream. If vmalloc page_fault happens inside of interrupt handler with interrupts disabled then on exit path from exception handler when there is no pending interrupts, the following code (arch/x86/xen/xen-asm_32.S:112): cmpw $0x0001, XEN_vcpu_info_pending(%eax) sete XEN_vcpu_info_mask(%eax) will enable interrupts even if they has been previously disabled according to eflags from the bounce frame (arch/x86/xen/xen-asm_32.S:99) testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp) setz XEN_vcpu_info_mask(%eax) Solution is in setting XEN_vcpu_info_mask only when it should be set according to cmpw $0x0001, XEN_vcpu_info_pending(%eax) but not clearing it if there isn't any pending events. Reproducer for bug is attached to RHBZ 707552 Signed-off-by:
Igor Mammedov <imammedo@redhat.com> Acked-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Sonny Rao authored
commit 5b339bdf upstream. We ran into an issue where it looks like we're not properly ignoring a pci device with a non-good status property when we walk the device tree and instanciate the Linux side PCI devices. However, the EEH init code does look for the property and disables EEH on these devices. This leaves us in an inconsistent where we are poking at a supposedly bad piece of hardware and RTAS will block our config cycles because EEH isn't enabled anyway. Signed-of-by:
Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Yang Li authored
commit 38e1313f upstream. Since commit 57b150cc, desc->affinity of an irq is changed after calling desc->chip->set_affinity. Therefore we need to fix the irq_choose_cpu() not to depend on the desc->affinity for new mask. Signed-off-by:
Jiajun Wu <b06378@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
NeilBrown authored
commit 1b6afa17 upstream. I don't know what I was thinking putting 'rcu' after a dynamically sized array! The array could still be in use when we call rcu_free() (That is the point) so we mustn't corrupt it. Signed-off-by:
-
Marek Marczykowski authored
commit 4352b47a upstream. barrier variable is int, not long. This overflow caused another variable override: "err" (in PV code) and "binfo" (in xenlinux code - drivers/xen/blkfront/blkfront.c). The later caused incorrect device flags (RO/removable etc). Signed-off-by:
Marek Marczykowski <marmarek@mimuw.edu.pl> Acked-by:
Ian Campbell <Ian.Campbell@citrix.com> [v1: Changed title] Signed-off-by:
-
Michal Schmidt authored
commit d1dc7abf upstream. Suppose that several linear skbs of the same flow were received by GRO. They were thus merged into one skb with a frag_list. Then a new skb of the same flow arrives, but it is a paged skb with data starting in its frags[]. Before adding the skb to the frag_list skb_gro_receive() will of course adjust the skb to throw away the headers. It correctly modifies the page_offset and size of the frag, but it leaves incorrect information in the skb: ->data_len is not decreased at all. ->len is decreased only by headlen, as if no change were done to the frag. Later in a receiving process this causes skb_copy_datagram_iovec() to return -EFAULT and this is seen in userspace as the result of the recv() syscall. In practice the bug can be reproduced with the sfc driver. By default the driver uses an adaptive scheme when it switches between using napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is reproduced when under rx load with enough successful GRO merging the driver decides to switch from the former to the latter. Manual control is also possible, so reproducing this is easy with netcat: - on machine1 (with sfc): nc -l 12345 > /dev/null - on machine2: nc machine1 12345 < /dev/zero - on machine1: echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages - See that nc has quit suddenly. [v2: Modified by Eric Dumazet to avoid advancing skb->data past the end and to use a temporary variable.] Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 226917b0 (upstream ea530692 and a68e5c94 and ce5f6824 all mushed together) as Jonathan Nieder reports that this causes a regression on some hardware. More details can be found at http://bugs.debian.org/622259 Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by:
-
Herbert Xu authored
commit 0aa68271 upstream. Currently we disallow GSO packets on the IPv6 forward path. This patch fixes this. Note that I discovered that our existing GSO MTU checks (e.g., IPv4 forwarding) are buggy in that they skip the check altogether, when they really should be checking gso_size + header instead. I have also been lazy here in that I haven't bothered to segment the GSO packet by hand before generating an ICMP message. Someone should add that to be 100% correct. Reported-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Apollon Oikonomopoulos <apoikos@gmail.com> Signed-off-by:
Faidon Liambotis <paravoid@debian.org> Signed-off-by:
-
Sridhar Samudrala authored
commit 8e1e8a47 upstream. Found this problem when testing IPv6 from a KVM guest to a remote host via e1000e device on the host. The following patch fixes the check for IPv6 GSO packet in Intel ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
Stratos Psomadakis authored
Fix broken backport for IPv6 tunnels in 2.6.32-longterm kernels. upstream commit d5aa407f ("tunnels: fix netns vs proto registration ordering") , which was included in 2.6.32.44-longterm, was not backported correctly, and results in a NULL pointer dereference in ip6_tunnel.c for longterm kernels >=2.6.32.44 Use [un]register_pernet_gen_device() instead of [un]register_pernet_device() to fix it. Signed-off-by:
Stratos Psomadakis <psomas@gentoo.org> Cc: Wolfgang Walter <wolfgang.walter@stwm.de> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Ian Campbell authored
commit 4a0342ca upstream. CC arch/sparc/kernel/pcic.o arch/sparc/kernel/pcic.c: In function 'pcic_probe': arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds] cc1: all warnings being treated as errors I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
David S. Miller authored
commit 5598473a upstream. If we can't push the pending register windows onto the user's stack, we disallow signal delivery even if the signal would be delivered on a valid seperate signal stack. Add a register window save area in the signal frame, and store any unsavable windows there. On sigreturn, if any windows are still queued up in the signal frame, try to push them back onto the stack and if that fails we kill the process immediately. This allows the debug/tst-longjmp_chk2 glibc test case to pass. Signed-off-by:
-
Daniel Schwierzeck authored
commit fbe5e29e upstream. This oops have been already fixed with commit 27141666 atm: [br2684] Fix oops due to skb->dev being NULL It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). but have been introduced again with commit b6211ae7 atm: Use SKB queue and list helpers instead of doing it by-hand. Signed-off-by:
Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 543cc38c upstream. When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle. BUG: unable to handle kernel paging request at 6b6b6b9f IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30 *pdpt = 0000000034f21001 *pde = 0000000000000000 Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1 EIP is at driver_sysfs_remove+0x10/0x30 EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000) Call Trace: [<c06909ef>] __device_release_driver+0x1f/0xa0 [<c0690b20>] device_release_driver+0x20/0x40 [<c068fd64>] bus_remove_device+0x84/0xe0 [<c068e12a>] ? device_remove_attrs+0x2a/0x80 [<c068e267>] device_del+0xe7/0x170 [<c06d93d4>] usb_disconnect+0xd4/0x180 [<c06d9d61>] hub_thread+0x691/0x1600 [<c0473260>] ? wake_up_bit+0x30/0x30 [<c0442a39>] ? complete+0x49/0x60 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c0472eb4>] kthread+0x74/0x80 [<c0472e40>] ? kthread_worker_fn+0x150/0x150 [<c0809b3e>] kernel_thread_helper+0x6/0x10 Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Wang Zhi authored
commit d0f2fb25 upstream. From EHCI Spec p.28 HC should clear PORT_SUSPEND when SW clears PORT_RESUME. In Intel Oaktrail platform, MPH (Multi-Port Host Controller) core clears PORT_SUSPEND directly when SW sets PORT_RESUME bit. If we rely on PORT_SUSPEND bit to stop USB resume, we will miss the action of clearing PORT_RESUME. This will cause unexpected long resume signal on USB bus. Signed-off-by:
Wang Zhi <zhi.wang@windriver.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
commit c96fbdd0 upstream. Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
- 29 Aug, 2011 11 commits
-
-
Greg Kroah-Hartman authored
-
Carolyn Wyborny authored
commit 064b4330 upstream. Register writes followed by a delay are required to have a flush before the delay in order to commit the values to the register. Without the flush, the code following the delay may not function correctly. Reported-by:
Tong Ho <tong.ho@ericsson.com> Reported-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Miklos Szeredi authored
commit c2183d1e upstream. FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the message processing could overrun and result in a "kernel BUG at fs/fuse/dev.c:629!" Reported-by:
Han-Wen Nienhuys <hanwenn@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Marcin Slusarz authored
commit 7c4c3960 upstream. ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jack Steiner authored
commit 05e33fc2 upstream. Delete the 10 msec delay between the INIT and SIPI when starting slave cpus. I can find no requirement for this delay. BIOS also has similar code sequences without the delay. Removing the delay reduces boot time by 40 sec. Every bit helps. Signed-off-by:
Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
H. Peter Anvin authored
commit 7ca0758c upstream. When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle the arguments to match the int $0x80 calling convention. This was probably a design mistake, but it's what it is now. This causes errors if the system call as to be restarted. For SYSENTER, we have to invoke the instruction from the vdso as the return address is hardcoded. Accordingly, we can simply replace the jump in the vdso with an int $0x80 instruction and use the slower entry point for a post-restart. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.comSigned-off-by:
-
Shawn Bohrer authored
commit 9ea71503 upstream. commit 7485d0d3 (futexes: Remove rw parameter from get_futex_key()) in 2.6.33 fixed two problems: First, It prevented a loop when encountering a ZERO_PAGE. Second, it fixed RW MAP_PRIVATE futex operations by forcing the COW to occur by unconditionally performing a write access get_user_pages_fast() to get the page. The commit also introduced a user-mode regression in that it broke futex operations on read-only memory maps. For example, this breaks workloads that have one or more reader processes doing a FUTEX_WAIT on a futex within a read only shared file mapping, and a writer processes that has a writable mapping issuing the FUTEX_WAKE. This fixes the regression for valid futex operations on RO mappings by trying a RO get_user_pages_fast() when the RW get_user_pages_fast() fails. This change makes it necessary to also check for invalid use cases, such as anonymous RO mappings (which can never change) and the ZERO_PAGE which the commit referenced above was written to address. This patch does restore the original behavior with RO MAP_PRIVATE mappings, which have inherent user-mode usage problems and don't really make sense. With this patch performing a FUTEX_WAIT within a RO MAP_PRIVATE mapping will be successfully woken provided another process updates the region of the underlying mapped file. However, the mmap() man page states that for a MAP_PRIVATE mapping: It is unspecified whether changes made to the file after the mmap() call are visible in the mapped region. So user-mode users attempting to use futex operations on RO MAP_PRIVATE mappings are depending on unspecified behavior. Additionally a RO MAP_PRIVATE mapping could fail to wake up in the following case. Thread-A: call futex(FUTEX_WAIT, memory-region-A). get_futex_key() return inode based key. sleep on the key Thread-B: call mprotect(PROT_READ|PROT_WRITE, memory-region-A) Thread-B: write memory-region-A. COW happen. This process's memory-region-A become related to new COWed private (ie PageAnon=1) page. Thread-B: call futex(FUETX_WAKE, memory-region-A). get_futex_key() return mm based key. IOW, we fail to wake up Thread-A. Once again doing something like this is just silly and users who do something like this get what they deserve. While RO MAP_PRIVATE mappings are nonsensical, checking for a private mapping requires walking the vmas and was deemed too costly to avoid a userspace hang. This Patch is based on Peter Zijlstra's initial patch with modifications to only allow RO mappings for futex operations that need VERIFY_READ access. Reported-by:
David Oliver <david@rgmadvisors.com> Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: peterz@infradead.org Cc: eric.dumazet@gmail.com Cc: zvonler@rgmadvisors.com Cc: hughd@google.com Link: http://lkml.kernel.org/r/1309450892-30676-1-git-send-email-sbohrer@rgmadvisors.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Daniel T Chen authored
commit eade7b28 upstream. BugLink: https://bugs.launchpad.net/bugs/826081 The original reporter needs 'Headphone Jack Sense' enabled to have audible audio, so add his PCI SSID to the whitelist. Reported-and-tested-by: Muhammad Khurram Khan Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
Daniel Mack authored
commit da6094ea upstream. The snd_usb_caiaq driver currently assumes that output urbs are serviced in time and doesn't track when and whether they are given back by the USB core. That usually works fine, but due to temporary limitations of the XHCI stack, we faced that urbs were submitted more than once with this approach. As it's no good practice to fire and forget urbs anyway, this patch introduces a proper bit mask to track which requests have been submitted and given back. That alone however doesn't make the driver work in case the host controller is broken and doesn't give back urbs at all, and the output stream will stop once all pre-allocated output urbs are consumed. But it does prevent crashes of the controller stack in such cases. See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Timo Warns authored
commit 338d0f0a upstream. Signed-off-by:
Timo Warns <warns@pre-sense.de> Signed-off-by:
-
Timo Warns authored
commit 3eb8e74e upstream. The kernel automatically evaluates partition tables of storage devices. The code for evaluating GUID partitions (in fs/partitions/efi.c) contains a bug that causes a kernel oops on certain corrupted GUID partition tables. This bug has security impacts, because it allows, for example, to prepare a storage device that crashes a kernel subsystem upon connecting the device (e.g., a "USB Stick of (Partial) Death"). crc = efi_crc32((const unsigned char *) (*gpt), le32_to_cpu((*gpt)->header_size)); computes a CRC32 checksum over gpt covering (*gpt)->header_size bytes. There is no validation of (*gpt)->header_size before the efi_crc32 call. A corrupted partition table may have large values for (*gpt)->header_size. In this case, the CRC32 computation access memory beyond the memory allocated for gpt, which may cause a kernel heap overflow. Validate value of GUID partition table header size. [akpm@linux-foundation.org: fix layout and indenting] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
