- 05 Jun, 2017 13 commits
-
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-14-alexander.levin@verizon.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Levin, Alexander (Sasha Levin) authored
- More rcu stubs - New dummy headers due to sched header split - jhash2 included in due to kernel lockdep inclusion and usage Signed-off-by:
-
Alexander Sverdlin authored
Mixing fd-based and stream-base IO results in interleaved output like following: ===================================== liblockdep 4.7.6 ------------------------------------- conopal/372 is trying to release lock (0x3a45c) at: /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c) [0xb613c688] but there are no more locks to release! other info that might help us debug this: no locks held by conopal/372. stack backtrace: ===================================== liblockdep 4.7.6 ---------------------------------/usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c] /usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0] /usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450] /usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40] /usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4] /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688] /lib/libpt.so.2.17-alpha2(_ZN10PContainer14AssignContentsERKS_+0xe4)[0xb6160730] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x90)[0xb6435edc] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc] /lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224] /lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8] /lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0] /lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c] /lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4] /usr/lib/liblockdep.so.4.7.6(+0x1e3c)[0xb67c2e3c] /usr/lib/liblockdep.so.4.7.6(+0x5fe0)[0xb67c6fe0] /usr/lib/liblockdep.so.4.7.6(+0x6450)[0xb67c7450] /usr/lib/liblockdep.so.4.7.6(lock_release+0x5c)[0xb67c7c40] /usr/lib/liblockdep.so.4.7.6(pthread_mutex_unlock+0x38)[0xb67c91d4] /lib/libpt.so.2.17-alpha2(_ZN11PTimedMutex6SignalEv+0x3c)[0xb613c688] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormat14AssignContentsERK10PContainer+0x78)[0xb6435ec4] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormataSERK7PString+0x68)[0xb643b610] /lib/libopal.so.3.17-alpha2(_ZN15OpalMediaFormatC2EPKc+0x68)[0xb643b6cc] /lib/libopal.so.3.17-alpha2(_ZN11OpalWAVFile14AddMediaFormatERK15OpalMediaFormat+0x330)[0xb66b2224] /lib/libopal.so.3.17-alpha2(+0x2526f8)[0xb640c6f8] /lib/ld-linux-armhf.so.3(+0x102f0)[0xb6f852f0] /lib/ld-linux-armhf.so.3(+0x1044c)[0xb6f8544c] /lib/ld-linux-armhf.so.3(+0xac4)[0xb6f75ac4] Therefore change all bare printf(...) to dprintf(STDOUT_FILENO, ...) to sychronize with backtrace_symbols_fd(). [ BUG: bad unlock balance detected! ] Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by:
-
Alexander Sverdlin authored
Allow user to call "liblockdep_install" target. Also add liblockdep to "all" and "install" targets (as "help" command suggests). Signed-off-by:
-
Levin, Alexander (Sasha Levin) authored
New position, new email address. Signed-off-by:
-
Vishal Thanki authored
With -lpthread option, the test for ABBA_2threads was failing, and test passed if it was removed. Since -pthread compiler option is sufficient for linking to pthread libraries, this patch removes -lpthread. Signed-off-by:
Vishal Thanki <vishalthanki@gmail.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Cc: ben@decadent.org.uk Link: http://lkml.kernel.org/r/20170525130005.5947-9-alexander.levin@verizon.comSigned-off-by:
-
Ben Hutchings authored
We define init_utsname() as static but not inline, resulting in a warning for every source file that includes lockdep.h but doesn't call it. Since it is only used by lockdep.c, define it in there. Signed-off-by:
-
Ben Hutchings authored
liblockdep defines trivial macros for working with interrupt flags, as interrupts are never disabled in userland. This results in warnings from gcc when -Wunused-but-set-variable is enabled, and it is enabled by -Wall. Fix this by evaluating the flags parameter and casting it to void. Signed-off-by:
-
Ben Hutchings authored
liblockdep defines various macros that may expand to an expression with no effect, while the in-kernel definition does have an effect. This results in warnings from gcc when -Wunused-value is enabled, and is is enabled by -Wall. Fix this by introducing trivial functions, as function return values are generally allowed to be ignored. Signed-off-by:
-
Ben Hutchings authored
Regressions in liblockdep may be missed because it doesn't enable warnings. Adding -Wall immediately introduces a lot of warnings, but those will be fixed by the following commits. Signed-off-by:
-
Ben Hutchings authored
lockdep.c now uses ARRAY_SIZE(). Signed-off-by:
-
Ben Hutchings authored
liblockdep has been broken since commit 75dd602a ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by:
-
Ben Hutchings authored
__lock_pin_lock() now calls prandom_u32() which is not defined in liblockdep. __lock_pin_lock() and its caller lock_pin_lock() are dead code in liblockdep, but we still need to provide a definition of prandom_u32() in case lazy binding is disabled. Signed-off-by:
-
- 04 Jun, 2017 9 commits
-
-
Linus Torvalds authored
-
Richard Narron authored
This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by:Richard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - Fix a typo in commit e0926934 ("NFS append COMMIT after synchronous COPY") that breaks copy offload - Fix the connect error propagation in xs_tcp_setup_socket() - Fix a lock leak in nfs40_walk_client_list - Verify that pNFS requests lie within the offset range of the layout segment" * tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Mark unnecessarily extern functions as static SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() NFSv4.0: Fix a lock leak in nfs40_walk_client_list pnfs: Fix the check for requests in range of layout segment xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() NFS fix COMMIT after COPY
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fix from Greg KH: "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a lot of people reported as causing lockdep and other warnings. Right after I reverted this in my tree, it seems like another "correct" fix might have shown up, but it's too late in the release cycle to be messing with tty core locking, so let's just revert this for now to go back how things always have been and try it again for 4.13. This has not been in linux-next as I only reverted it a few hours ago" * tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: fix port buffer locking"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: - a couple of regression fixes in synaptics and axp20x-pek drivers - try to ease transition from PS/2 to RMI for Synaptics touchpad users by ensuring we do not try to activate RMI mode when RMI SMBus support is not enabled, and nag users a bit to enable it - plus a couple of other changes that seemed worthwhile for this release * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Input: synaptics - tell users to report when they should be using rmi-smbus Input: synaptics - warn the users when there is a better mode Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Input: synaptics - clear device info before filling in Input: silead - disable interrupt during suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixlet from Alexandre Belloni: "A single patch, not really a fix but I don't think there is any reason to delay it. Change the mailing list address" * tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: update RTC mailing list
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is nine fixes, seven of which are for the qedi driver (new as of 4.10) the other two are a use after free in the cxgbi drivers and a potential NULL dereference in the rdac device handler" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libcxgbi: fix skb use after free scsi: qedi: Fix endpoint NULL panic during recovery. scsi: qedi: set max_fin_rt default value scsi: qedi: Set firmware tcp msl timer value. scsi: qedi: Fix endpoint NULL panic in qedi_set_path. scsi: qedi: Set dma_boundary to 0xfff. scsi: qedi: Correctly set firmware max supported BDs. scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "For the most part this is just a minor -rc cycle for the rdma subsystem. Even given that this is all of the -rc patches since the merge window closed, it's still only about 25 patches: - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes - A few upper layer protocol fixes (IPoIB, iSER, SRP) - A modest number of core fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits) RDMA/SA: Fix kernel panic in CMA request handler flow RDMA/umem: Fix missing mmap_sem in get umem ODP call RDMA/core: not to set page dirty bit if it's already set. RDMA/uverbs: Declare local function static and add brackets to sizeof RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA/srp: Fix NULL deref at srp_destroy_qp() RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings RDMA/qedr: add null check before pointer dereference RDMA/mlx5: set UMR wqe fence according to HCA cap net/mlx5: Define interface bits for fencing UMR wqe RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled RDMA/qib,hfi1: Fix MR reference count leak on write with immediate RDMA/hfi1: Defer setting VL15 credits to link-up interrupt RDMA/hfi1: change PCI bar addr assignments to Linux API functions RDMA/hfi1: fix array termination by appending NULL to attr array RDMA/iw_cxgb4: fix the calculation of ipv6 header size RDMA/iw_cxgb4: calculate t4_eq_status_entries properly RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/nes: ACK MPA Reply frame ...
-
Greg Kroah-Hartman authored
This reverts commit 925bb1ce. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: <valdis.kletnieks@vt.edu> Reported-by:
Russell King <linux@armlinux.org.uk> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Jun, 2017 8 commits
-
-
Jan Kara authored
nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "A couple of patches for the aspeed pwm fan driver" * tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT hwmon: (aspeed-pwm-tacho) Select REGMAP
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "NAND updates from Boris: tango fixes: - Add missing MODULE_DEVICE_TABLE() in tango_nand.c - Update the number of corrected bitflips core fixes: - Fix a long standing memory leak in nand_scan_tail() - Fix several bugs introduced by the per-vendor init/detection infrastructure (introduced in 4.12) - Add a static specifier to nand_ooblayout_lp_hamming_ops definition" * tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd: mtd: nand: make nand_ooblayout_lp_hamming_ops static mtd: nand: tango: Update ecc_stats.corrected mtd: nand: tango: Export OF device ID table as module aliases mtd: nand: samsung: warn about un-parseable ECC info mtd: nand: free vendor-specific resources in init failure paths mtd: nand: drop unneeded module.h include mtd: nand: don't leak buffers when ->scan_bbt() fails -
Stefan Schaeckeler authored
Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by:
Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Stefan Schaeckeler authored
Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by:
-
Hans de Goede authored
acpi_dev_found checks that there is a matching ACPI node, but it may be disabled (_STA method returns 0) in which case the soc_button_array driver will not bind to it and axp20x-pek should handle the power-button. This commit switches from acpi_dev_found to acpi_dev_present to avoid not registering an input-dev for the powerbutton when there is a disabled PNP0C40 device. The ACPI-6.0 standard defines a standard gpio button device using the ACPI0011 HID replacing the custom PNP0C40 gpio device, many newer devices define both PNP0C40 and ACPI0011 devices enabling one or the other depending on whether the BIOS thinks it is going to boot Android or Windows. This commit adds a check for the ACPI0011 device, so that if either device is present *and* enabled we don't register an input-dev for the powerbutton. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Commit 9b13a4ca ("Input: axp20x-pek - do not register input device on some systems") added a check for the INTCFD9 ACPI device which also handles the powerbutton as on some systems the powerbutton is connected to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled by soc_button_array which attaches itself to the INTCFD9 ACPI device. Testing + comparing DSDTs has shown that this only happens on Cherry Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on Bay Trail devices but there the power button is only connected to the PMIC and not handled by soc_button_array. This means that the INTCFD9 check has caused a regression on Bay Trail devices, causing power-button presses to no longer be seen. This commit fixes this by limiting the check to devices where the ACPI node for the AXP288 contains a _HRV (hardware revision) attribute with a value of 3 which indicates we are dealing with a Cherry Trail platform. Fixes: 9b13a4ca ("Input: axp20x-pek - do not register input ...") Reported-by:
Сергей Трусов <t.rus76@ya.ru> Signed-off-by:
-
Dmitry Torokhov authored
Merge with mainline to get acpi_dev_present() needed by patches to axp20x-pek driver.
-
- 02 Jun, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert one more problematic commit related to the ACPI-based handling of laptop lids and make some unuseful error messages coming from ACPICA go away. Specifics: - Revert one more commit related to the ACPI-based handling of laptop lids that changed the default behavior on laptops that booted with closed lids and introduced a regression there (Benjamin Tissoires). - Add a missing acpi_put_table() to the code implementing the /sys/firmware/acpi/tables interface to prevent a counter in the ACPICA core from overflowing (Dan Williams). - Drop error messages printed by ACPICA on acpi_get_table() reference counting mismatches as they need not indicate real errors at this point (Lv Zheng)" * tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Fix regression introduced by a too early mechanism enabling Revert "ACPI / button: Change default behavior to lid_init_state=open" ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix two bugs in error code paths in the cpufreq core and in the kirkwood-cpufreq driver. Specifics: - Make cpufreq_register_driver() return an error if the ->init() calls fail for all CPUs to prevent non-functional drivers from hanging around for no reason (David Arcari). - Make kirkwood-cpufreq check the return value of clk_prepare_enable() (which may fail) as appropriate (Arvind Yadav)" * tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() cpufreq: cpufreq_register_driver() should return -ENODEV if init fails -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull /dev/random bug fix from Ted Ts'o: "Fix a race on architectures with prioritized interrupts (such as m68k) which can causes crashes in drivers/char/random.c:get_reg()" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: fix race in drivers/char/random.c:get_reg()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: make lx-dmesg command work (reliably) mm: consider memblock reservations for deferred memory initialization sizing mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified mlock: fix mlock count can not decrease in race condition mm/migrate: fix refcount handling when !hugepage_migration_supported() dax: fix race between colliding PMD & PTE entries mm: avoid spurious 'bad pmd' warning messages mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once pcmcia: remove left-over %Z format slub/memcg: cure the brainless abuse of sysfs attributes initramfs: fix disabling of initramfs (and its compression) mm: clarify why we want kmalloc before falling backto vmallock frv: declare jiffies to be located in the .data section include/linux/gfp.h: fix ___GFP_NOLOCKDEP value ksm: prevent crash after write_protect_page fails
-
André Draszik authored
lx-dmesg needs access to the log_buf symbol from printk.c. Unfortunately, the symbol log_buf also exists in BPF's verifier.c and hence gdb can pick one or the other. If it happens to pick BPF's log_buf, lx-dmesg doesn't work: (gdb) lx-dmesg Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0: Error occurred in Python command: Cannot access memory at address 0x0 (gdb) p log_buf $15 = 0x0 Luckily, GDB has a way to deal with this, see https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html (gdb) info variables ^log_buf$ All variables matching regular expression "^log_buf$": File <linux.git>/kernel/bpf/verifier.c: static char *log_buf; File <linux.git>/kernel/printk/printk.c: static char *log_buf; (gdb) p 'verifier.c'::log_buf $1 = 0x0 (gdb) p 'printk.c'::log_buf $2 = 0x811a6aa0 <__log_buf> "" (gdb) p &log_buf $3 = (char **) 0x8120fe40 <log_buf> (gdb) p &'verifier.c'::log_buf $4 = (char **) 0x8120fe40 <log_buf> (gdb) p &'printk.c'::log_buf $5 = (char **) 0x8048b7d0 <log_buf> By being explicit about the location of the symbol, we can make lx-dmesg work again. While at it, do the same for the other symbols we need from printk.c Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.netSigned-off-by:
André Draszik <git@andred.net> Tested-by:
Kieran Bingham <kieran@bingham.xyz> Acked-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michal Hocko authored
We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mel Gorman <mgorman@suse.de> Tested-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by:
-
James Morse authored
KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.comSigned-off-by:
James Morse <james.morse@arm.com> Acked-by:
Punit Agrawal <punit.agrawal@arm.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by:
-
Yisheng Xie authored
Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently: [1] testcase linux:~ # cat test_mlockal grep Mlocked /proc/meminfo for j in `seq 0 10` do for i in `seq 4 15` do ./p_mlockall >> log & done sleep 0.2 done # wait some time to let mlock counter decrease and 5s may not enough sleep 5 grep Mlocked /proc/meminfo linux:~ # cat p_mlockall.c #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #define SPACE_LEN 4096 int main(int argc, char ** argv) { int ret; void *adr = malloc(SPACE_LEN); if (!adr) return -1; ret = mlockall(MCL_CURRENT | MCL_FUTURE); printf("mlcokall ret = %d\n", ret); ret = munlockall(); printf("munlcokall ret = %d\n", ret); free(adr); return 0; } In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this. Fix it by counting the number of page whose PageMlock flag is cleared. Fixes: 1ebb7cc6 (" mm: munlock: batch NR_MLOCK zone state updates") Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.comSigned-off-by:Yisheng Xie <xieyisheng1@huawei.com> Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Punit Agrawal authored
On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by:Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
-
Ross Zwisler authored
We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.comSigned-off-by:Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by:
-
