Separate out the command execution part of if_changed, as we did
for if_changed_dep.

This allows us to reuse it in if_changed_rule.

  define rule_foo
          $(call cmd_and_savecmd,foo)
          $(call cmd,bar)
  endef
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)

Like built-in.a, the command length of the *.mod rule scales with
the depth of the directory times the number of objects in the Makefile.

Add $(obj)/ by the shell command (awk) instead of by Make's builtin
function.

In-tree modules still have some room to the limit (ARG_MAX=2097152),
but this is more future-proof for big modules in a deep directory.

For example, you can build i915 as a module (CONFIG_DRM_I915=m) and
compare drivers/gpu/drm/i915/.i915.mod.cmd with/without this commit.

The issue is more critical for external modules because the M= path
can be very long as Jeff Johnson reported before [1].

[1] https://lore.kernel.org/linux-kbuild/4c02050c4e95e4cb8cc04282695f8404@codeaurora.org/Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)

Kbuild runs at the top of objtree instead of changing the working
directory to subdirectories. I think this design is nice overall but
some commands have a scalability issue.

The build command of built-in.a is one of them whose length scales with:

    O(D * N)

Here, D is the length of the directory path (i.e. $(obj)/ prefix),
N is the number of objects in the Makefile, O() is the big O notation.

The deeper directory the Makefile directory is located, the more easily
it will hit the too long argument error.

We can make it better. Trim the $(obj)/ by Make's builtin function, and
restore it by a shell command (sed).

With this, the command length scales with:

    O(D + N)

In-tree modules still have some room to the limit (ARG_MAX=2097152),
but this is more future-proof for big modules in a deep directory.

For example, you can build i915 as builtin (CONFIG_DRM_I915=y) and
compare drivers/gpu/drm/i915/.built-in.a.cmd with/without this commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)

The 'static' specifier and EXPORT_SYMBOL() are an odd combination.

Commit 15bfc234 ("modpost: check for static EXPORT_SYMBOL*
functions") tried to detect it, but this check has false negatives.

Here is the sample code.

  Makefile:

    obj-y += foo1.o foo2.o

  foo1.c:

    #include <linux/export.h>
    static void foo(void) {}
    EXPORT_SYMBOL(foo);

  foo2.c:

    void foo(void) {}

foo1.c exports the static symbol 'foo', but modpost cannot catch it
because it is fooled by foo2.c, which has a global symbol with the
same name.

s->is_static is cleared if a global symbol with the same name is found
somewhere, but EXPORT_SYMBOL() and the global symbol do not necessarily
belong to the same compilation unit.

This check should be done per compilation unit, but I do not know how
to do it in modpost. modpost runs against vmlinux.o or modules, which
merges multiple objects, then forgets their origin.

modpost cannot parse individual objects because they may not be ELF but
LLVM IR when CONFIG_LTO_CLANG=y.

Add a simple bash script to parse the output from ${NM}. This works for
CONFIG_LTO_CLANG=y because llvm-nm can dump symbols of LLVM IR files.

Revert 15bfc234.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)

Parisc overrides 'nm' with a shell script. I was hit by a false-positive
error of $(NM) because this script returns the exit status of grep
instead of ${CROSS_COMPILE}nm. (grep returns 1 if no lines were selected)

I tried to fix it, but in the code review, Helge suggested to remove it
entirely. [1]

This script was added in 2003. [2]

Presumably, it was a workaround for old toolchains (but even the parisc
maintainer does not know the detail any more).

Hopefully, recent tools should work fine.

[1]: https://lore.kernel.org/all/1c12cd26-d8aa-4498-f4c0-29478b9578fe@gmx.de/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=36eaa6e4c0e0b6950136b956b72fd08155b92ca3Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>

When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created
for each module. Also, objtool is postponed until LLVM IR is converted
to ELF.

CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until
objects are merged together.

This commit stops generating *.prelink.o, so the build flow will look
similar with/without LTO.

The following figures show how the LTO build currently works, and
how this commit is changing it.

Current build flow
==================

 [1] single-object module

                                      $(LD)
           $(CC)                     +objtool              $(LD)
    foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko
                              (LLVM IR)          (ELF)       |    (ELF)
                                                             |
                                                 foo.mod.o --/
                                                 (LLVM IR)

 [2] multi-object module
                                      $(LD)
           $(CC)         $(AR)       +objtool               $(LD)
    foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko
                           |  (archive)          (ELF)       |    (ELF)
    foo2.c -----> foo2.o --/                                 |
                 (LLVM IR)                       foo.mod.o --/
                                                 (LLVM IR)

  One confusion is that foo.o in multi-object module is an archive
  despite of its suffix.

New build flow
==============

 [1] single-object module

  Since there is only one object, there is no need to keep the LLVM IR.
  Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO
  is disabled, $(LD) is unneeded because $(CC) produces an ELF object.

               $(CC)+$(LD)+objtool              $(LD)
    foo.c ----------------------------> foo.o ---------> foo.ko
                                        (ELF)     |      (ELF)
                                                  |
                                      foo.mod.o --/
                                      (LLVM IR)

 [2] multi-object module

  Previously, $(AR) was used to combine LLVM IR files into an archive,
  but there was no technical reason to do so. Use $(LD) to merge them
  into a single ELF object.

                               $(LD)
             $(CC)            +objtool          $(LD)
    foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko
                                 |      (ELF)     |      (ELF)
    foo2.c ---------> foo2.o ----/                |
                     (LLVM IR)        foo.mod.o --/
                                      (LLVM IR)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>

*.prelink.o is created when CONFIG_LTO_CLANG or CONFIG_X86_KERNEL_IBT
is enabled.

Replace $(linked-object) with $(CONFIG_LTO_CLANG)$(CONFIG_X86_KERNEL_IBT)
so you will get a quick idea of when the --link option is passed.

No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14

Guenter Roeck reported the build breakage for parisc and csky.
I confirmed nios2 and openrisc are broken as well.

The reason is that they borrow libgcc.a from the toolchains.

For example, see this line in arch/parisc/Makefile:

    LIBGCC          := $(shell $(CC) -print-libgcc-file-name)

Some objects in libgcc.a are linked to vmlinux.o, but they do not have
.*.cmd files.

Obviously, there is no EXPORT_SYMBOL in external objects. Ignore them.

(Most of the architectures import library code into the kernel tree.
Perhaps those 4 architectures can do similar, but I do not know how
challenging it is.)

Fixes: f292d875 ("modpost: extract symbol versions from *.cmd files")
Link: https://lore.kernel.org/linux-kbuild/20220528224745.GA2501857@roeck-us.net/T/#mac65c20c71c3e272db0350ecfba53fcd8905b0a0Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>

Similar cleanup to commit 5c816641 ("kbuild: replace $(if A,A,B)
with $(or A,B)").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

if ((addr - sym->st_value) < distance) {
            distance = addr - sym->st_value;
            near = sym;
    } else if ((addr - sym->st_value) == distance) {
            near = sym;
    }

is equivalent to:

    if (addr - sym->st_value <= distance) {
            distance = addr - sym->st_value;
            near = sym;
    }

(The else-if block can overwrite 'distance' with the same value).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Move ARRAY_SIZE() from file2alias.c to modpost.h to reuse it in
section_mismatch().

Also, move the variable 'check' inside the for-loop.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

check_sec_ref() does not use the first parameter 'mod'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.

strchr(3) says:
  The strchr() and strrchr() functions return a pointer to the matched
  character or NULL if the character is not found. The terminating null
  byte is considered part of the string, so that if c is specified as
  '\0', these functions return a pointer to the terminator.

When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).

Test code
---------

  char str1[] = "abc";
  char str2[] = "ab";

  strcpy(str1, "$");
  strcpy(str2, "$");

  printf("test1: %d\n", is_arm_mapping_symbol(str1));
  printf("test2: %d\n", is_arm_mapping_symbol(str2));

Result
------

  test1: 0
  test2: 1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:

ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL

The reason is that for now the condition from remove_dot():

if (m && (s[n + m] == '.' || s[n + m] == 0))

which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):

param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'

So it's off-by-one and was like that since 2014.

Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.

Fixes: fcd38ed0 ("scripts: modpost: fix compilation warning")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The kallsyms program supports --absolute-percpu option but does not display
it in the usage message, fix it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When building an external module, if users don't need to separate the
compilation output and source code, they run the following command:
"make -C $(LINUX_SRC_DIR) M=$(PWD)". At this point, "$(KBUILD_EXTMOD)"
and "$(src)" are the same.

If they need to separate them, they run "make -C $(KERNEL_SRC_DIR)
O=$(KERNEL_OUT_DIR) M=$(OUT_DIR) src=$(PWD)". Before running the
command, they need to copy "Kbuild" or "Makefile" to "$(OUT_DIR)" to
prevent compilation failure.

So the kernel should change the included path to avoid the copy operation.
Signed-off-by: Jing Leng <jleng@ambarella.com>
[masahiro: I do not think "M=$(OUT_DIR) src=$(PWD)" is the official way,
but this patch is a nice clean up anyway.]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
   This change improves DM's hipri bio polling (REQ_POLLED) performance
   by 7 - 20% depending on the system.

 - Update DM core to use jump_labels to further reduce cost of unlikely
   branches for zoned block devices, dm-stats and swap_bios throttling.

 - Various DM core changes to reduce bio-based DM overhead and simplify
   IO accounting.

 - Fundamental DM core improvements to dm_io reference counting and the
   elimination of using bio_split()+bio_chain() -- instead DM's
   bio-based IO accounting is updated to account that a split occurred.

 - Improve DM core's abnormal bio processing to do less work.

 - Improve DM core's hipri polling support to use a single list rather
   than an hlist.

 - Update DM core to pass NULL bdev to bio_alloc_clone() so that
   initialization that isn't useful for DM can be elided.

 - Add cond_resched to DM stats' various loops that loop over all
   entries.

 - Fix incorrect error code return from DM integrity's constructor.

 - Make DM crypt's printing of the key constant-time.

 - Update bio-based DM multipath to provide high-resolution timer to the
   Historical Service Time (HST) path selector.

* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
  dm: pass NULL bdev to bio_alloc_clone
  dm cache metadata: remove unnecessary variable in __dump_mapping
  dm mpath: provide high-resolution timer to HST for bio-based
  dm crypt: make printing of the key constant-time
  dm integrity: fix error code in dm_integrity_ctr()
  dm stats: add cond_resched when looping over entries
  dm: improve abnormal bio processing
  dm: simplify bio-based IO accounting further
  dm: put all polled dm_io instances into a single list
  dm: improve dm_io reference counting
  dm: don't grab target io reference in dm_zone_map_bio
  dm: improve bio splitting and associated IO accounting
  dm: switch to bdev based IO accounting interfaces
  dm: pass dm_io instance to dm_io_acct directly
  dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
  dm: use bio_sectors in dm_aceept_partial_bio
  dm: simplify basic targets
  dm: conditionally enable branching for less used features
  dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
  dm: move hot dm_io members to same cacheline as dm_target_io
  ...

Pull rdma updates from Jason Gunthorpe:
 "Small collection of incremental improvement patches:

   - Minor code cleanup patches, comment improvements, etc from static
     tools

   - Clean the some of the kernel caps, reducing the historical stealth
     uAPI leftovers

   - Bug fixes and minor changes for rdmavt, hns, rxe, irdma

   - Remove unimplemented cruft from rxe

   - Reorganize UMR QP code in mlx5 to avoid going through the IB verbs
     layer

   - flush_workqueue(system_unbound_wq) removal

   - Ensure rxe waits for objects to be unused before allowing the core
     to free them

   - Several rc quality bug fixes for hfi1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (67 commits)
  RDMA/rtrs-clt: Fix one kernel-doc comment
  RDMA/hfi1: Remove all traces of diagpkt support
  RDMA/hfi1: Consolidate software versions
  RDMA/hfi1: Remove pointless driver version
  RDMA/hfi1: Fix potential integer multiplication overflow errors
  RDMA/hfi1: Prevent panic when SDMA is disabled
  RDMA/hfi1: Prevent use of lock before it is initialized
  RDMA/rxe: Fix an error handling path in rxe_get_mcg()
  IB/core: Fix typo in comment
  RDMA/core: Fix typo in comment
  IB/hf1: Fix typo in comment
  IB/qib: Fix typo in comment
  IB/iser: Fix typo in comment
  RDMA/mlx4: Avoid flush_scheduled_work() usage
  IB/isert: Avoid flush_scheduled_work() usage
  RDMA/mlx5: Remove duplicate pointer assignment in mlx5_ib_alloc_implicit_mr()
  RDMA/qedr: Remove unnecessary synchronize_irq() before free_irq()
  RDMA/hns: Use hr_reg_read() instead of remaining roce_get_xxx()
  RDMA/hns: Use hr_reg_xxx() instead of remaining roce_set_xxx()
  RDMA/irdma: Add SW mechanism to generate completions on error
  ...

Pull kernel hardening fix from Kees Cook:
 "This fixes an unlucky build race condition when using the GCC plugins,
  noticed by a few folks.

   - Avoid GCC plugins needing utsrelease.h build target (Masahiro Yamada)"

* tag 'hardening-v5.19-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: use KERNELVERSION for plugin version

Pull nfsd updates from Chuck Lever:
 "We introduce 'courteous server' in this release. Previously NFSD would
  purge open and lock state for an unresponsive client after one lease
  period (typically 90 seconds). Now, after one lease period, another
  client can open and lock those files and the unresponsive client's
  lease is purged; otherwise if the unresponsive client's open and lock
  state is uncontended, the server retains that open and lock state for
  up to 24 hours, allowing the client's workload to resume after a
  lengthy network partition.

  A longstanding issue with NFSv4 file creation is also addressed.
  Previously a file creation can fail internally, returning an error to
  the client, but leave the newly created file in place as an artifact.
  The file creation code path has been reorganized so that internal
  failures and race conditions are less likely to result in an unwanted
  file creation.

  A fault injector has been added to help exercise paths that are run
  during kernel metadata cache invalidation. These caches contain
  information maintained by user space about exported filesystems. Many
  of our test workloads do not trigger cache invalidation.

  There is one patch that is needed to support PREEMPT_RT and a fix for
  an ancient 'sleep while spin-locked' splat that seems to have become
  easier to hit since v5.18-rc3"

* tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (36 commits)
  NFSD: nfsd_file_put() can sleep
  NFSD: Add documenting comment for nfsd4_release_lockowner()
  NFSD: Modernize nfsd4_release_lockowner()
  NFSD: Fix possible sleep during nfsd4_release_lockowner()
  nfsd: destroy percpu stats counters after reply cache shutdown
  nfsd: Fix null-ptr-deref in nfsd_fill_super()
  nfsd: Unregister the cld notifier when laundry_wq create failed
  SUNRPC: Use RMW bitops in single-threaded hot paths
  NFSD: Clean up the show_nf_flags() macro
  NFSD: Trace filecache opens
  NFSD: Move documenting comment for nfsd4_process_open2()
  NFSD: Fix whitespace
  NFSD: Remove dprintk call sites from tail of nfsd4_open()
  NFSD: Instantiate a struct file when creating a regular NFSv4 file
  NFSD: Clean up nfsd_open_verified()
  NFSD: Remove do_nfsd_create()
  NFSD: Refactor NFSv4 OPEN(CREATE)
  NFSD: Refactor NFSv3 CREATE
  NFSD: Refactor nfsd_create_setattr()
  NFSD: Avoid calling fh_drop_write() twice in do_nfsd_create()
  ...

Pull OpenRISC updates from Stafford Horne:

 - A few sparse warning fixups and other cleanups I noticed when working
   on a recent TLB bug found on a new OpenRISC core bring up.

 - A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
   platforms when running CI tests

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Allow power off handler overriding
  openrisc: Remove unused IMMU tlb workardound
  openrisc/fault: Fix symbol scope warnings
  openrisc/delay: Add include to fix symbol not declared warning
  openrisc/time: Fix symbol scope warnings
  openrisc/traps: Declare unhandled_exception for asmlinkage
  openrisc/traps: Remove die_if_kernel function
  openrisc/traps: Declare file scope symbols as static
  openrisc: Update litex defconfig to support glibc userland
  openrisc: Pretty print show_registers memory dumps
  openrisc: Add syscall details to emergency syscall debugging
  openrisc: Add support for liteuart emergency printing
  openrisc: Cleanup emergency print handling
  openrisc: Add gcc machine instruction flag configuration
  openrisc: define nop command for simulator reboot
  openrisc: remove bogus nops and shutdowns
  openrisc: fix typos in comments

Pull ARC updates from Vineet Gupta:

 - Basic eBPF support (Sergey)

* tag 'arc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: bpf: define uapi for BPF_PROG_TYPE_PERF_EVENT program type
  ARC: disasm: handle ARCv2 case in kprobe get/set functions
  ARC: implement syscall tracepoints
  ARC: enable HAVE_REGS_AND_STACK_ACCESS_API feature

Pull modules updates from  Luis Chamberlain:

 - It was time to tidy up kernel/module.c and one way of starting with
   that effort was to split it up into files. At my request Aaron Tomlin
   spearheaded that effort with the goal to not introduce any functional
   at all during that endeavour. The penalty for the split is +1322
   bytes total, +112 bytes in data, +1210 bytes in text while bss is
   unchanged. One of the benefits of this other than helping make the
   code easier to read and review is summoning more help on review for
   changes with livepatching so kernel/module/livepatch.c is now pegged
   as maintained by the live patching folks.

   The before and after with just the move on a defconfig on x86-64:

     $ size kernel/module.o
        text    data     bss     dec     hex filename
       38434    4540     104   43078    a846 kernel/module.o

     $ size -t kernel/module/*.o
        text    data     bss     dec     hex filename
       4785     120       0    4905    1329 kernel/module/kallsyms.o
      28577    4416     104   33097    8149 kernel/module/main.o
       1158       8       0    1166     48e kernel/module/procfs.o
        902     108       0    1010     3f2 kernel/module/strict_rwx.o
       3390       0       0    3390     d3e kernel/module/sysfs.o
        832       0       0     832     340 kernel/module/tree_lookup.o
      39644    4652     104   44400    ad70 (TOTALS)

 - Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
   to enable tracking unloaded modules which did taint the kernel.

 - Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
   which lets architectures to request having modules data in vmalloc
   area instead of module area. There are three reasons why an
   architecture might want this:

    a) On some architectures (like book3s/32) it is not possible to
       protect against execution on a page basis. The exec stuff can be
       mapped by different arch segment sizes (on book3s/32 that is 256M
       segments). By default the module area is in an Exec segment while
       vmalloc area is in a NoExec segment. Using vmalloc lets you muck
       with module data as NoExec on those architectures whereas before
       you could not.

    b) By pushing more module data to vmalloc you also increase the
       probability of module text to remain within a closer distance
       from kernel core text and this reduces trampolines, this has been
       reported on arm first and powerpc folks are following that lead.

    c) Free'ing module_alloc() (Exec by default) area leaves this
       exposed as Exec by default, some architectures have some security
       enhancements to set this as NoExec on free, and splitting module
       data with text let's future generic special allocators be added
       to the kernel without having developers try to grok the tribal
       knowledge per arch. Work like Rick Edgecombe's permission vmalloc
       interface [0] becomes easier to address over time.

       [0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r

 - Masahiro Yamada's symbol search enhancements

* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
  module: merge check_exported_symbol() into find_exported_symbol_in_section()
  module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
  module: do not pass opaque pointer for symbol search
  module: show disallowed symbol name for inherit_taint()
  module: fix [e_shstrndx].sh_size=0 OOB access
  module: Introduce module unload taint tracking
  module: Move module_assert_mutex_or_preempt() to internal.h
  module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
  module.h: simplify MODULE_IMPORT_NS
  powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
  module: Remove module_addr_min and module_addr_max
  module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
  module: Introduce data_layout
  module: Prepare for handling several RB trees
  module: Always have struct mod_tree_root
  module: Rename debug_align() as strict_align()
  module: Rework layout alignment to avoid BUG_ON()s
  module: Move module_enable_x() and frob_text() in strict_rwx.c
  module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
  module: Move version support into a separate file
  ...

Pull sysctl updates from Luis Chamberlain:
 "For two kernel releases now kernel/sysctl.c has been being cleaned up
  slowly, since the tables were grossly long, sprinkled with tons of
  #ifdefs and all this caused merge conflicts with one susbystem or
  another.

  This tree was put together to help try to avoid conflicts with these
  cleanups going on different trees at time. So nothing exciting on this
  pull request, just cleanups.

  Thanks a lot to the Uniontech and Huawei folks for doing some of this
  nasty work"

* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
  sched: Fix build warning without CONFIG_SYSCTL
  reboot: Fix build warning without CONFIG_SYSCTL
  kernel/kexec_core: move kexec_core sysctls into its own file
  sysctl: minor cleanup in new_dir()
  ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
  fs/proc: Introduce list_for_each_table_entry for proc sysctl
  mm: fix unused variable kernel warning when SYSCTL=n
  latencytop: move sysctl to its own file
  ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
  ftrace: Fix build warning
  ftrace: move sysctl_ftrace_enabled to ftrace.c
  kernel/do_mount_initrd: move real_root_dev sysctls to its own file
  kernel/delayacct: move delayacct sysctls to its own file
  kernel/acct: move acct sysctls to its own file
  kernel/panic: move panic sysctls to its own file
  kernel/lockdep: move lockdep sysctls to its own file
  mm: move page-writeback sysctls to their own file
  mm: move oom_kill sysctls to their own file
  kernel/reboot: move reboot sysctls to its own file
  sched: Move energy_aware sysctls to topology.c
  ...

Pull mailbox updates from Jassi Brar:
 "api:
   - hrtimer fix

  qcom:
   - log pending irq during resume
   - minor cosmetic changes

  omap:
   - use pm_runtime_resume_and_get

  imx:
   - use pm_runtime_resume_and_get
   - remove redundant initializer

  mtk:
   - added GCE header for MT8186
   - enable support for MT8186

  tegra:
   - remove redundant NULL check
   - added hsp_sm_ops for send/recv api
   - support shared mailboxes

  stm:
   - remove unsupported "wakeup" irq

  pcc:
   - sanitize mbox allocated memory before use

  misc:
   - documentation fixes for arm_mhu and qcom-ipcc"

* tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom-ipcc: Fix -Wunused-function with CONFIG_PM_SLEEP=n
  mailbox: forward the hrtimer if not queued and under a lock
  mailbox: qcom-ipcc: Log the pending interrupt during resume
  mailbox: pcc: Fix an invalid-load caught by the address sanitizer
  dt-bindings: mailbox: remove the IPCC "wakeup" IRQ
  mailbox: correct kerneldoc
  mailbox: omap: using pm_runtime_resume_and_get to simplify the code
  mailbox:imx: using pm_runtime_resume_and_get
  mailbox: mediatek: support mt8186 adsp mailbox
  dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name
  mailbox: tegra-hsp: Add 128-bit shared mailbox support
  dt-bindings: tegra186-hsp: add type for shared mailboxes
  mailbox: tegra-hsp: Add tegra_hsp_sm_ops
  dt-bindings: gce: add the GCE header file for MT8186
  mailbox: remove an unneeded NULL check on list iterator
  mailbox: imx: remove redundant initializer
  dt-bindings: mailbox: qcom-ipcc: simplify the example

Pull gpio updates from Bartosz Golaszewski:
 "We have lots of small changes all over the place, but no huge reworks
  or new drivers:

   - use ioread()/iowrite() interfaces instead of raw inb()/outb() in
     drivers

   - make irqchips immutable due to the new warning popping up when
     drivers try to modify the irqchip structures

   - add new compatibles to dt-bindings for realtek-otto, renesas-rcar
     and pca95xx

   - add support for new models to gpio-rcar, gpio-pca953x &
     gpio-realtek-otto

   - allow parsing of GPIO hogs represented as children nodes of
     gpio-uniphier

   - define a set of common GPIO consumer strings in dt-bindings

   - shrink code in gpio-ml-ioh by using more devres interfaces

   - pass arguments to devm_kcalloc() in correct order in gpio-sim

   - add new helpers for iterating over GPIO firmware nodes and
     descriptors to gpiolib core and use it in several drivers

   - drop unused syscon_regmap_lookup_by_compatible() function

   - correct format specifiers and signedness of variables in GPIO ACPI

   - drop unneeded error checks in gpio-ftgpio

   - stop using the deprecated of_gpio.h header in gpio-zevio

   - drop platform_data support in gpio-max732x

   - simplify Kconfig dependencies in gpio-vf610

   - use raw spinlocks where needed to make PREEMPT_RT happy

   - fix return values in board files using gpio-pcf857x

   - convert more drivers to using fwnode instead of of_node

   - minor fixes and improvements in gpiolib core"

* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
  gpio: sifive: Make the irqchip immutable
  gpio: rcar: Make the irqchip immutable
  gpio: pcf857x: Make the irqchip immutable
  gpio: pca953x: Make the irqchip immutable
  gpio: dwapb: Make the irqchip immutable
  gpio: sim: Use correct order for the parameters of devm_kcalloc()
  gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
  gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
  gpio: ws16c48: Utilize iomap interface
  gpio: gpio-mm: Utilize iomap interface
  gpio: 104-idio-16: Utilize iomap interface
  gpio: 104-idi-48: Utilize iomap interface
  gpio: 104-dio-48e: Utilize iomap interface
  gpio: zevio: drop of_gpio.h header
  gpio: max77620: Make the irqchip immutable
  dt-bindings: gpio: pca95xx: add entry for pca6408
  gpio: pca953xx: Add support for pca6408
  gpio: max732x: Drop unused support for irq and setup code via platform data
  gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
  gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
  ...

Merge tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "cros_ec:
   - Fix wrong error handling path
   - Clean-up patches

  cros_ec_chardev:
   - Re-introduce cros_ec_cmd_xfer to fix ABI broken

  cros_ec_lpcs:
   - Support the Framework Laptop

  cros_ec_typec:
   - Fix NULL dereference

  chromeos_acpi:
   - Add ChromeOS ACPI device driver
   - Fix Sphinx errors when `make htmldocs`

  misc:
   - Drop BUG_ON()s"

* tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: Use imperative mood for ChromeOS ACPI sysfs ABI descriptions
  platform/chrome: Use tables for values lists of ChromeOS ACPI sysfs ABI
  platform/chrome: cros_ec_spi: drop BUG_ON() if `din` isn't large enough
  platform/chrome: cros_ec_spi: drop unneeded BUG_ON()
  platform/chrome: cros_ec_i2c: drop BUG_ON() in cros_ec_pkt_xfer_i2c()
  platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_get_host_event()
  platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_prepare_tx()
  platform/chrome: correct cros_ec_prepare_tx() usage
  platform/chrome: cros_ec_proto: drop unneeded BUG_ON() in prepare_packet()
  platform/chrome: Add ChromeOS ACPI device driver
  platform/chrome: cros_ec_typec: Check for EC driver
  platform/chrome: cros_ec_lpcs: reserve the MEC LPC I/O ports first
  platform/chrome: cros_ec_lpcs: detect the Framework Laptop
  platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
  platform/chrome: cros_ec: append newline to all logs
  platform/chrome: cros_ec: sort header inclusion alphabetically
  platform/chrome: cros_ec: determine `wake_enabled` in cros_ec_suspend()
  platform/chrome: cros_ec: remove unused variable `was_wake_device`
  platform/chrome: cros_ec: fix error handling in cros_ec_register()

Commit e5499dd7 ("media: lirc: revert removal of unused feature
flags") reintroduced unused feature flags in the lirc uapi header, but
failed to reintroduce the necessary exceptions for the docs.

Fixes: e5499dd7 ("media: lirc: revert removal of unused feature flags")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm updates from Paolo Bonzini:
 "S390:

   - ultravisor communication device driver

   - fix TEID on terminating storage key ops

  RISC-V:

   - Added Sv57x4 support for G-stage page table

   - Added range based local HFENCE functions

   - Added remote HFENCE functions based on VCPU requests

   - Added ISA extension registers in ONE_REG interface

   - Updated KVM RISC-V maintainers entry to cover selftests support

  ARM:

   - Add support for the ARMv8.6 WFxT extension

   - Guard pages for the EL2 stacks

   - Trap and emulate AArch32 ID registers to hide unsupported features

   - Ability to select and save/restore the set of hypercalls exposed to
     the guest

   - Support for PSCI-initiated suspend in collaboration with userspace

   - GICv3 register-based LPI invalidation support

   - Move host PMU event merging into the vcpu data structure

   - GICv3 ITS save/restore fixes

   - The usual set of small-scale cleanups and fixes

  x86:

   - New ioctls to get/set TSC frequency for a whole VM

   - Allow userspace to opt out of hypercall patching

   - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

  AMD SEV improvements:

   - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES

   - V_TSC_AUX support

  Nested virtualization improvements for AMD:

   - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
     nested vGIF)

   - Allow AVIC to co-exist with a nested guest running

   - Fixes for LBR virtualizations when a nested guest is running, and
     nested LBR virtualization support

   - PAUSE filtering for nested hypervisors

  Guest support:

   - Decoupling of vcpu_is_preempted from PV spinlocks"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
  KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
  KVM: selftests: x86: Sync the new name of the test case to .gitignore
  Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
  x86, kvm: use correct GFP flags for preemption disabled
  KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
  x86/kvm: Alloc dummy async #PF token outside of raw spinlock
  KVM: x86: avoid calling x86 emulator without a decoded instruction
  KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
  x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
  s390/uv_uapi: depend on CONFIG_S390
  KVM: selftests: x86: Fix test failure on arch lbr capable platforms
  KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
  KVM: s390: selftest: Test suppression indication on key prot exception
  KVM: s390: Don't indicate suppression on dirtying, failing memop
  selftests: drivers/s390x: Add uvdevice tests
  drivers/s390/char: Add Ultravisor io device
  MAINTAINERS: Update KVM RISC-V entry to cover selftests support
  RISC-V: KVM: Introduce ISA extension register
  RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
  RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
  ...

Pull MM updates from Andrew Morton:
 "Almost all of MM here. A few things are still getting finished off,
  reviewed, etc.

   - Yang Shi has improved the behaviour of khugepaged collapsing of
     readonly file-backed transparent hugepages.

   - Johannes Weiner has arranged for zswap memory use to be tracked and
     managed on a per-cgroup basis.

   - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
     runtime enablement of the recent huge page vmemmap optimization
     feature.

   - Baolin Wang contributes a series to fix some issues around hugetlb
     pagetable invalidation.

   - Zhenwei Pi has fixed some interactions between hwpoisoned pages and
     virtualization.

   - Tong Tiangen has enabled the use of the presently x86-only
     page_table_check debugging feature on arm64 and riscv.

   - David Vernet has done some fixup work on the memcg selftests.

   - Peter Xu has taught userfaultfd to handle write protection faults
     against shmem- and hugetlbfs-backed files.

   - More DAMON development from SeongJae Park - adding online tuning of
     the feature and support for monitoring of fixed virtual address
     ranges. Also easier discovery of which monitoring operations are
     available.

   - Nadav Amit has done some optimization of TLB flushing during
     mprotect().

   - Neil Brown continues to labor away at improving our swap-over-NFS
     support.

   - David Hildenbrand has some fixes to anon page COWing versus
     get_user_pages().

   - Peng Liu fixed some errors in the core hugetlb code.

   - Joao Martins has reduced the amount of memory consumed by
     device-dax's compound devmaps.

   - Some cleanups of the arch-specific pagemap code from Anshuman
     Khandual.

   - Muchun Song has found and fixed some errors in the TLB flushing of
     transparent hugepages.

   - Roman Gushchin has done more work on the memcg selftests.

  ... and, of course, many smaller fixes and cleanups. Notably, the
  customary million cleanup serieses from Miaohe Lin"

* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
  mm: kfence: use PAGE_ALIGNED helper
  selftests: vm: add the "settings" file with timeout variable
  selftests: vm: add "test_hmm.sh" to TEST_FILES
  selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
  selftests: vm: add migration to the .gitignore
  selftests/vm/pkeys: fix typo in comment
  ksm: fix typo in comment
  selftests: vm: add process_mrelease tests
  Revert "mm/vmscan: never demote for memcg reclaim"
  mm/kfence: print disabling or re-enabling message
  include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
  include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
  mm: fix a potential infinite loop in start_isolate_page_range()
  MAINTAINERS: add Muchun as co-maintainer for HugeTLB
  zram: fix Kconfig dependency warning
  mm/shmem: fix shmem folio swapoff hang
  cgroup: fix an error handling path in alloc_pagecache_max_30M()
  mm: damon: use HPAGE_PMD_SIZE
  tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
  nodemask.h: fix compilation error with GCC12
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config

 - Support W=e as a shorthand for KCFLAGS=-Werror

 - Fix CONFIG_IKHEADERS build to support toybox cpio

 - Add scripts/dummy-tools/pahole to ease distro packagers' life

 - Suppress false-positive warnings from checksyscalls.sh for W=2 build

 - Factor out the common code of arch/*/boot/install.sh into
   scripts/install.sh

 - Support 'kernel-install' tool in scripts/prune-kernel

 - Refactor module-versioning to link the symbol versions at the final
   link of vmlinux and modules

 - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
   an arch-agnostic way

 - Refactor modpost, Makefiles

* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
  genksyms: adjust the output format to modpost
  kbuild: stop merging *.symversions
  kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
  modpost: extract symbol versions from *.cmd files
  modpost: add sym_find_with_module() helper
  modpost: change the license of EXPORT_SYMBOL to bool type
  modpost: remove left-over cross_compile declaration
  kbuild: record symbol versions in *.cmd files
  kbuild: generate a list of objects in vmlinux
  modpost: move *.mod.c generation to write_mod_c_files()
  modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
  scripts/prune-kernel: Use kernel-install if available
  kbuild: factor out the common installation code into scripts/install.sh
  modpost: split new_symbol() to symbol allocation and hash table addition
  modpost: make sym_add_exported() always allocate a new symbol
  modpost: make multiple export error
  modpost: dump Module.symvers in the same order of modules.order
  modpost: traverse the namespace_list in order
  modpost: use doubly linked list for dump_lists
  modpost: traverse unresolved symbols in order
  ...

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "Lots of smaller additions to the defconfig files for both 32-bit and
  64-bit arm platforms, enabling drivers that are now usable on common
  hardware, and a few options to make it possible to boot a file system
  image using systemd"

* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
  ARM: configs: Enable ASoC AC'97 glue
  ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
  ARM: configs: at91: Enable AUTOFS_FS required by systemd
  ARM: configs: at91: Enable options required for systemd
  ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
  ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
  ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
  ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
  ARM: configs: at91: sama7: add xisc and csi2dc
  ARM: multi_v7_defconfig: add atmel video pipeline modules
  ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
  arm64: defconfig: Enable the WM8524 codec driver
  arm64: defconfig: Enable modules for arm displays
  arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
  arm64: defconfig: Enable Renesas RZ/V2M SoC
  arm64: defconfig: Enable ARCH_R9A07G043
  arm64: defconfig: Enable configs for DisplayPort on J721e
  arm64: defconfig: Build Tegra ASRC module
  ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
  arm: mediatek: select arch timer for mt7629
  ...

Pull ARM driver updates from Arnd Bergmann:
 "There are minor updates to SoC specific drivers for chips by Rockchip,
  Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.

  Noteworthy driver changes include:

   - Several conversions of DT bindings to yaml format.

   - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.

   - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
     and support for more chips in the RPMh power domains and the
     soc-id.

   - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.

   - Apple M1 gains support for the on-chip NVMe controller, making it
     possible to finally use the internal disks. This also includes SoC
     drivers for their RTKit IPC and for the SART DMA address filter.

  For other subsystems that merge their drivers through the SoC tree, we
  have

   - Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
     SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
     now has a cache for firmware argument structures as an
     optimization, and SCMI now supports the 3.1 version of the
     specification.

   - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
     drivers

   - Memory controller updates for Tegra, and a few updates for other
     platforms"

* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
  memory: tegra: Add MC error logging on Tegra186 onward
  memory: tegra: Add memory controller channels support
  memory: tegra: Add APE memory clients for Tegra234
  memory: tegra: Add Tegra234 support
  nvme-apple: fix sparse endianess warnings
  soc/tegra: pmc: Document core domain fields
  soc: qcom: pdr: use static for servreg_* variables
  soc: imx: fix semicolon.cocci warnings
  soc: renesas: R-Car V3U is R-Car Gen4
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc/tegra: pmc: Select REGMAP
  dt-bindings: reset: st,sti-powerdown: Convert to yaml
  dt-bindings: reset: st,sti-picophyreset: Convert to yaml
  dt-bindings: reset: socfpga: Convert to yaml
  dt-bindings: reset: snps,axs10x-reset: Convert to yaml
  ...

Pull ARM DT updates from Arnd Bergmann:
 "There are 40 branches this time, adding a lot of new hardware support,
  and cleanups. Krzysztof Kozlowski continues his treewide cleanups.

  There are a number of new SoCs, all of them as part of existing
  families, and typically added along with a reference board:

   - Renesas RZ/G2UL (R9A07G043) is the single-core version of the
     RZ/G2L general-purpose MPU.

   - Renesas RZ/V2M (R9A09G011) is a smart camera SoC

   - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
     cores and deep learning accerlation.

   - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
     and dual Wifi-6.

   - Corstone1000 is a generic platform from Arm that is used for
     designing custom SoCs, the support for now is for the Fixed Virtual
     Platform emulation for it.

   - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
     upcoming Chromebooks.

   - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
     MMU-less SoC to be added in a while

  New machines based on already supported SoCs this time are mainly for
  32-bit platforms and include:

   - Two wireless routers based on Broadcom bcm4708

   - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
     for the industrial embedded market, and on NXP LS1021A based IOT
     board.

   - Two ethernet switches based on Microchip LAN966

   - Eight Qualcomm Snapdragon based machines, including a smartwatch, a
     Chromebook board and some phones

   - Another phone based on the old ST-Ericsson Ux500 platform

   - Seven STM32MP1 based boards

   - Four single-board computers based on Rockchip RK3566/RK3568"

* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
  ARM: dts: kswitch-d10: enable networking
  ARM: dts: lan966x: add switch node
  ARM: dts: lan966x: add serdes node
  ARM: dts: lan966x: add reset switch reset node
  ARM: dts: lan966x: add MIIM nodes
  ARM: dts: lan966x: add hwmon node
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: rename pinctrl nodes
  ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: turris-omnia: Add atsha204a node
  arm64: dts: mt8192: Follow binding order for SCP registers
  arm64: dts: mediatek: add mtk-snfi for mt7622
  arm64: dts: mediatek: mt8195-demo: enable uart1
  ...

Pull 32-bit ARM SoC updates from Arnd Bergmann:
 "These updates are for platform specific code in arch/arm/, mostly
  fixing minor issues.

  The at91 platform gains support for better power management on the
  lan966 platform and new firmware on the sama5 platform. The mediatek
  soc drivers in turn are enabled for the new mt8195 SoC"

* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: at91: debug: add lan966 support
  ARM: at91: pm: add support for sama5d2 secure suspend
  ARM: at91: add code to handle secure calls
  ARM: at91: Kconfig: implement PIT64B selection
  ARM: at91: pm: add quirks for pm
  ARM: at91: pm: use kernel documentation style
  ARM: at91: pm: introduce macros for pm mode replacement
  ARM: at91: pm: keep documentation inline with structure members
  orion5x: fix typos in comments
  ARM: hisi: Add missing of_node_put after of_find_compatible_node
  ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
  ARM: shmobile: Drop commas after dt_compat sentinels
  soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
  MAINTAINERS: Add Broadcom BCMBCA entry
  arm: bcmbca: add arch bcmbca machine entry
  MAINTAINERS: Broadcom internal lists aren't maintainers
  dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
  soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
  soc: mediatek: add mtk-mutex support for mt8195 vdosys0
  soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
  ...

Use try_cmpxchg64 instead of cmpxchg64 in CMPXCHG_LOOP macro.
x86 CMPXCHG instruction returns success in ZF flag, so this
change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg). The main loop of lockref_get improves from:

  13:	48 89 c1             	mov    %rax,%rcx
  16:	48 c1 f9 20          	sar    $0x20,%rcx
  1a:	83 c1 01             	add    $0x1,%ecx
  1d:	48 89 ce             	mov    %rcx,%rsi
  20:	89 c1                	mov    %eax,%ecx
  22:	48 89 d0             	mov    %rdx,%rax
  25:	48 c1 e6 20          	shl    $0x20,%rsi
  29:	48 09 f1             	or     %rsi,%rcx
  2c:	f0 48 0f b1 4d 00    	lock cmpxchg %rcx,0x0(%rbp)
  32:	48 39 d0             	cmp    %rdx,%rax
  35:	75 17                	jne    4e <lockref_get+0x4e>

to:

  13:	48 89 ca             	mov    %rcx,%rdx
  16:	48 c1 fa 20          	sar    $0x20,%rdx
  1a:	83 c2 01             	add    $0x1,%edx
  1d:	48 89 d6             	mov    %rdx,%rsi
  20:	89 ca                	mov    %ecx,%edx
  22:	48 c1 e6 20          	shl    $0x20,%rsi
  26:	48 09 f2             	or     %rsi,%rdx
  29:	f0 48 0f b1 55 00    	lock cmpxchg %rdx,0x0(%rbp)
  2f:	75 02                	jne    33 <lockref_get+0x33>

[ Michael Ellerman and Mark Rutland confirm that code generation on
  powerpc and arm64 respectively is also ok, even though they do not
  have a native arch_try_cmpxchg() implementation, and rely on the
  default fallback case    - Linus ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: paulmck@linux.vnet.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that there are no more callers of nfsd_file_put() that might
hold a spin lock, ensure the lockdep infrastructure can catch
newly introduced calls to nfsd_file_put() made while a spinlock
is held.

Link: https://lore.kernel.org/linux-nfs/ece7fd1d-5fb3-5155-54ba-347cfc19bd9a@oracle.com/T/#mf1855552570cf9a9c80d1e49d91438cd9085aadaSigned-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>

And return explicit nfserr values that match what is documented in the
new comment / API contract.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>