- 21 Sep, 2016 1 commit
-
-
Alexandre Belloni authored
Move all clocks related to the slow clock controller to sckc.c. This avoids extern definitions and allows to remove sckc.h Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> [sboyd@codeaurora.org: Mark some functions static] Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
- 20 Sep, 2016 3 commits
-
-
Lucas Stach authored
Initialize the GPU clock muxes to sane inputs. Until now they have not been changed from their default values, which means that both GPU3D shader and GPU2D core were fed by clock inputs whose rates exceed the maximium allowed frequency of the cores by as much as 200MHz. This fixes a severe GPU stability issue on i.MX6DL. Cc: stable@vger.kernel.org Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Lucas Stach authored
The current clock tree only implements the minimal set of differences between the i.MX6Q and the i.MX6DL, but that doesn't really reflect reality. Apply the following fixes to match the RM: - DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by GPU3D_CORE - GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF - GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF Cc: stable@vger.kernel.org Signed-off-by:
-
Kalle Kankare authored
Add clocks configuration for CSI, FIRI and IEEE1588. Signed-off-by:
Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Acked-by:
-
- 16 Sep, 2016 15 commits
-
-
Masahiro Yamada authored
Add clock data arrays for all UniPhier SoCs with a binding document. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
This includes UniPhier clock driver code, except SoC-specific data arrays. Signed-off-by:
-
Rafał Miłecki authored
This clock is present on BCM53573 devices (including BCM47189) that use Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function device so we use syscon (and regmap) for it. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
-
Vivek Gautam authored
Adding missing reset lines for USB 3.0 PHY. Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: ca023328 ("clk: zx: register ZX296718 clocks") Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Wei Yongjun authored
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Chen-Yu Tsai authored
The register offset for the mipi-csi clk is off by 4, a copy paste error from the mipi-dsi clk. Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Chen-Yu Tsai authored
The PLLs have a "lock" bit in their configuration registers which indicate if the PLL has locked on to the requested clock rate. We check this bit in the .set_rate op. The PLL cannot lock on if it's not running, which might be a false positive (warning). Set the CLK_SET_RATE_UNGATE flag for all PLLs so whenever clk_set_rate is called on them, they get enabled and the "lock" check is really checking the PLL. Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by:
-
Chen-Yu Tsai authored
The LCD controller and HDMI controller use the LCDx-CHy and HDMI clocks to generate their dot clocks. To be able to generate a full range of possible clock rates, the parent PLL clock rates should also be changed. Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by:
-
Gabriel Fernandez authored
This patch configures the semi-synchronous mode of the video clocks of clkgenD2. Signed-off-by:
Olivier Bideau <olivier.bideau@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
-
Gabriel Fernandez authored
This patch allows fine tuning of the quads FS for audio clocks accuracy. Signed-off-by:
-
Gabriel Fernandez authored
Use an algorithm instead of a table to compute clocks for fs660c32 synthesizer. During a video playback we need to adjust audio & video frequencies. A table can't cover all HDMI resolutions and audio adjustment. Signed-off-by:
-
Gabriel Fernandez authored
This patch reworks the clock binding to avoid too much detail in DT. Now we have only compatible string per type of clock (remark from Rob https://lkml.org/lkml/2016/5/25/492) Signed-off-by:
-
Gabriel Fernandez authored
STiH415 and STiH416 platforms are no longer used. these platforms will be deprecated for the next kernel. Signed-off-by:
-
- 15 Sep, 2016 3 commits
-
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Eric Anholt <eric@anholt.net> Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: -
Jon Mason authored
Make the clocks visible options that can be selected by anyone. This avoids the problems of: 1) Select is a reverse dependency and is hard for people to understand and can sometimes be a pain to track down 2) Build coverage goes down because configs are hidden 3) Code bloat Patch suggested by Stephen Boyd Signed-off-by:Jon Mason <jonmason@broadcom.com> Signed-off-by:
-
- 14 Sep, 2016 16 commits
-
-
Hoan Tran authored
Add X-Gene PMD clock support. PMD clock is implemented for a single register field. Output rate = parent_rate * (denominator - scale) / denominator with - denominator = bitmask of register field + 1 - scale = values of register field For example, for bitmask is 0x7, denominator will be 8 and scale will be computed and programmed accordingly. Signed-off-by:
Hoan Tran <hotran@apm.com> Signed-off-by:
-
Hoan Tran authored
Add APM X-Gene clock binding documentation for PMD clock. Signed-off-by:
-
Stephen Boyd authored
* clk-zte: clk: zx: register ZX296718 clocks clk: zx: reform pll config info to ease code extension
-
Jun Nie authored
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by:
Jun Nie <jun.nie@linaro.org> Signed-off-by:
-
Jun Nie authored
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by:
-
Jun Nie authored
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by:
-
Jun Nie authored
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
Alex Elder <elder@linaro.org> [sboyd@codeaurora.org: Save a line] Signed-off-by:
-
Uwe Kleine-König authored
This helps to decode error messages like: [ 0.000000] i.MX clk 82: register failed with -17 Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
-
Uwe Kleine-König authored
This fixes [ 0.000000] i.MX clk 82: register failed with -17 because the name is duplicated. Signed-off-by:
-
Arnd Bergmann authored
The addition of many gate clocks added two entries in an array for the same value: drivers/clk/meson/meson8b.c:479:10: error: initialized field overwritten [-Werror=override-init] [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw, [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_vencp_int.hw, This was clearly an accident, and since all other identifiers are listed in the order in which they are defined, I'm changing the first one to CLKID_GCLK_VENCI_INT0, making it all consistent again. Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/clk/mmp/clk-mmp2.c:75:13: warning: no previous prototype for 'mmp2_clk_init' [-Wmissing-prototypes] In fact, this function is declared in linux/clk/mmp.h, so this patch add missing header dependencies. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Acked-by:
-
Stephen Boyd authored
Merge tag 'clk-renesas-for-v4.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull renesas clk driver updates from Geert Uytterhoeven: - External crystal selection for RZ/A1, - CMT clocks for R-Car H3 and M3-W, - RAVB and Thermal clocks for R-Car M3-W. * tag 'clk-renesas-for-v4.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add CMT clocks clk: renesas: r8a7795: Add CMT clocks clk: renesas: r8a7796: Add RAVB clock clk: renesas: r8a7796: Add THS/TSC clock clk: renesas: rz: Select EXTAL vs USB clock
-
Wei Yongjun authored
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by:
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock driver changes from Maxime Ripard: Four more SoCs converted to the new clock framework (A31, A31s, A23 and A33). * tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Add hardware dependency clk: sunxi-ng: Add A23 CCU clk: sunxi-ng: Add A33 CCU support clk: sunxi-ng: Add N-class clocks support clk: sunxi-ng: mux: Add mux table macro clk: sunxi-ng: div: Allow to set a maximum clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure clk: sunxi-ng: div: Add mux table macros clk: sunxi-ng: Add A31/A31s clocks clk: sunxi-ng: mux: Add clk notifier functions clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents clk: sunxi-ng: mux: Add support for mux tables clk: sunxi-ng: mux: Rename mux macro to be consistent clk: sunxi-ng: nkm: Add mux to support multiple parents clk: sunxi-ng: mux: Increase fixed pre-divider div size
-
git://linuxtv.org/snawrocki/samsungStephen Boyd authored
Pull samsung clk driver updates from Sylwester Nawrocki: In addition to a few clean up and code consolidation patches this includes: - addition of sound subsystem related clocks for Exynos5410 SoC (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock" compatible in the clk-exynos-audss driver, - addition of DRAM controller related clocks for exynos5420, - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC clock drivers co-maintainer. * tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung: clk: samsung: Add support for EPLL on exynos5410 clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup clk: samsung: clk-exynos-audss: Add exynos5410 compatible clk: samsung: clk-exynos-audss: controller variant handling rework clk: samsung: Use common registration function for pll2550x clk: samsung: exynos5410: Expose the peripheral DMA gate clocks clk: samsung: exynos5420: Add clocks for CMU_CDREX domain clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code clk: samsung: exynos5260: Move struct samsung_cmu_info to init section MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
-
- 12 Sep, 2016 2 commits
-
-
Bui Duc Phuc authored
This patch adds CMT module clocks for r8a7796 SoC. Signed-off-by:
Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by:
-
Bui Duc Phuc authored
This patch adds CMT module clocks for r8a7795 SoC. Signed-off-by:
-
