- 29 Mar, 2019 1 commit
-
-
Maxime Chevallier authored
Some PHYs will use the 2500BaseX PHY_INTERFACE_MODE when being linked with a partner using 2.5GBaseT. Since we can't autonegotiate this speed between the MAC and the PHY, we need to have the proper comphy support enabled, to make sure we can safely advertise 2.5G and 1G in BaseT and be able to switch between both corresponding PHY interface modes. This is now possible since comphy support was added to this driver. This commit adds the 2500BaseT mode to the list of supported modes when using 2500BaseX, and was tested on a setup with an Armada385 and a 88E2010 PHY, both with and without the comphy node in the DT. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Mar, 2019 28 commits
-
-
Yi-Hung Wei authored
Add support for fine-grain timeout support to conntrack action. The new OVS_CT_ATTR_TIMEOUT attribute of the conntrack action specifies a timeout to be associated with this connection. If no timeout is specified, it acts as is, that is the default timeout for the connection will be automatically applied. Example usage: $ nfct timeout add timeout_1 inet tcp syn_sent 100 established 200 $ ovs-ofctl add-flow br0 in_port=1,ip,tcp,action=ct(commit,timeout=timeout_1) CC: Pravin Shelar <pshelar@ovn.org> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yi-Hung Wei authored
This patch exports nf_ct_set_timeout() and nf_ct_destroy_timeout(). The two functions are derived from xt_ct_destroy_timeout() and xt_ct_set_timeout() in xt_CT.c, and moved to nf_conntrack_timeout.c without any functional change. It would be useful for other users (i.e. OVS) that utilizes the finer-grain conntrack timeout feature. CC: Pablo Neira Ayuso <pablo@netfilter.org> CC: Pravin Shelar <pshelar@ovn.org> Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-03-28 please apply the following patchset to net-next. This reworks the control IO code in qeth so that we no longer need to poll for cmd completion, and refactors the IDX setup code to also use this improved IO path. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
This converts the IDX code to use qeth_send_control_data(), replacing a bunch of duplicated IO code and unbounded waits. It also allows the IDX sequence to benefit from the improved timeout & notify infrastructure, so that we can eliminate the DOWN -> ACTIVATING -> UP transition in the channel state machine. The patch looks rather big, but most of it is a straight-forward conversion of the old IDX cmd setup & callbacks to the new model. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
To avoid concurrency issues, some parts of the cmd setup are delayed until qeth_send_control_data() holds the IO channel's irq_pending "lock". Rather than hard-coding those setup steps for each cmd type, have the cmd provide a callback. This will make it easier to also issue IDX commands via qeth_send_control_data(). Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
As trivial cleanup before adding more users to qeth_notify_reply(), move the setup of reply->rc from the caller into the helper. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Current code makes it look like qeth_send_control_data_cb() is some sort of default callback for all cmds. But in practice, it is only used for half of the cmd buffers we issue. Reduce the confusion by only setting this callback for cmds that actually want it, and while at it give the callback a name that matches the established naming scheme. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
All callers are running in process context now, so we can safely sleep in qeth_send_control_data() while waiting for a cmd to complete. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
All users of the lock are running in process context now. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The inet6addr_chain is atomic. So instead of starting the cmd IO for SETIP / DELIP straight from the notifier callback, run it from a workqueue. This is the last step towards removal of cmd IO completion polling. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Extract a little helper, so that high-level callers can manipulate the IP table without worrying about the locking. This will make it easier to convert the code to a different locking primitive later on. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The L2 and L3 .ndo_set_rx_mode callbacks maintain an address cache to decide which addresses have changed since the last modeset. When the card is set offline, qeth_l?_stop_card() drains this cache. This happens only after 1) the net_device has been detached, and 2) any pending RX modeset has completed. Consequently we can access the cache lock-free. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
.ndo_set_rx_mode gets called in process context, but while holding the addr_list spinlock. Which means we currently can't sleep while re-programming the HW, and need to poll for IO completion. That's bad, in particular since receiving the cmd response can fail silently and we're then polling until the timeout hits. As a first step towards eliminating the IO completion polling, run the RX modeset from a work element and only take the addr_list lock while updating the RX mode address cache. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: =================== net: call for phys_port_name into devlink directly if possible phys_port_name may be assembled by a helper in devlink. It is currently the case only for mlxsw driver. Benefit from the get_devlink_port ndo and call into devlink directly from dev_get_phys_port_name(). That saves the trip to the driver, simplifies the code and makes it similar to recently introduced ethtool-devlink compat helpers. Move bnxt, partly nfp and dsa to let devlink core generate the name too. =================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently if the driver registers devlink port instance, it should set the devlink port attributes as well. Then the devlink core is able to obtain physical port name itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
If nn->port is defined it means that devlink_port has been registered for this port as well. Devlink core is handling the port name formatting. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since each non-legacy slave has its own devlink port instance correctly set, rely on devlink core to generate correct phys port name. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Rely on the previously introduced fallback and let the core call devlink in order to get the physical port name. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Now it is unused, remove it. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Change the init/fini flow and register devlink port instance before netdev. Now it is needed for correct behavior of phys_port_name generation, but in general it makes sense to register devlink port first. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Drop license boilerplate (obsoleted by SPDX license IDs), by Sven Eckelmann - Drop documentation for sysfs and debugfs Documentation, by Sven Eckelmann (2 patches) - Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches) - Update MAINTAINERS Tree, Chat and Bugtracker, by Sven Eckelmann (3 patches) - Rename batadv_dat_send_data, by Sven Eckelmann - update DAT entries with incoming ARP replies, by Linus Luessing - add multicast-to-unicast support for limited destinations, by Linus Luessing ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
- 27 Mar, 2019 11 commits
-
-
Eric Dumazet authored
According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The check for zero timeout is always true at the end of the proceeding while loop; the only other exit path in the loop is if the unimac MDIO is not busy. Remove the redundant zero timeout check and always return -ETIMEDOUT on this timeout return path. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
My recent patch had at least three problems : 1) TX zerocopy wants notification when skb is acknowledged, thus we need to call skb_zcopy_clear() if the skb is cached into sk->sk_tx_skb_cache 2) Some applications might expect precise EPOLLOUT notifications, so we need to update sk->sk_wmem_queued and call sk_mem_uncharge() from sk_wmem_free_skb() in all cases. The SOCK_QUEUE_SHRUNK flag must also be set. 3) Reuse of saved skb should have used skb_cloned() instead of simply checking if the fast clone has been freed. Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Numan Siddique authored
This patch adds a new action - 'check_pkt_len' which checks the packet length and executes a set of actions if the packet length is greater than the specified length or executes another set of actions if the packet length is lesser or equal to. This action takes below nlattrs * OVS_CHECK_PKT_LEN_ATTR_PKT_LEN - 'pkt_len' to check for * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER - Nested actions to apply if the packet length is greater than the specified 'pkt_len' * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested actions to apply if the packet length is lesser or equal to the specified 'pkt_len'. The main use case for adding this action is to solve the packet drops because of MTU mismatch in OVN virtual networking solution. When a VM (which belongs to a logical switch of OVN) sends a packet destined to go via the gateway router and if the nic which provides external connectivity, has a lesser MTU, OVS drops the packet if the packet length is greater than this MTU. With the help of this action, OVN will check the packet length and if it is greater than the MTU size, it will generate an ICMP packet (type 3, code 4) and includes the next hop mtu in it so that the sender can fragment the packets. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-July/047039.htmlSuggested-by:
Ben Pfaff <blp@ovn.org> Signed-off-by:
Numan Siddique <nusiddiq@redhat.com> CC: Gregory Rose <gvrose8192@gmail.com> CC: Pravin B Shelar <pshelar@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Tested-by:
Greg Rose <gvrose8192@gmail.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== ethtool: add support for Fast Link Down as new PHY tunable This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. This is the kernel-related series, the ethtool userspace extension I'd submit once the kernel part has been applied. v2: - add describing comment in patch 1 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
1000BaseT standard requires that a link is reported as down earliest after 750ms. Several use case however require a much faster detecion of a broken link. Fast Link Down supports this by intentionally violating a the standard. This patch exposes the Fast Link Down feature of 88E1540 and 88E6390. These PHY's can be found as internal PHY's in several switches: 88E6352, 88E6240, 88E6176, 88E6172, and 88E6390(X). Fast Link Down and EEE are mutually exclusive. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. v2: - add comment describing the constants Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
Instead of declaring a function in a .c file, declare it in a header file and include that header file from the source files that define and that use the function. That allows the compiler to verify consistency of declaration and definition. See also commit 52267790 ("sock: add MSG_ZEROCOPY") # v4.14. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'flags' not described in '__skb_flow_dissect' Cc: Tom Herbert <tom@herbertland.com> Fixes: cd79a238 ("flow_dissector: Add flags argument to skb_flow_dissector functions") # v4.3. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warnings are reported when building with W=1: net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl' Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 44c02a2c ("dev_ioctl(): move copyin/copyout to callers") # v4.16. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-