- 28 Mar, 2019 2 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Drop license boilerplate (obsoleted by SPDX license IDs), by Sven Eckelmann - Drop documentation for sysfs and debugfs Documentation, by Sven Eckelmann (2 patches) - Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches) - Update MAINTAINERS Tree, Chat and Bugtracker, by Sven Eckelmann (3 patches) - Rename batadv_dat_send_data, by Sven Eckelmann - update DAT entries with incoming ARP replies, by Linus Luessing - add multicast-to-unicast support for limited destinations, by Linus Luessing ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
- 27 Mar, 2019 37 commits
-
-
Eric Dumazet authored
According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The check for zero timeout is always true at the end of the proceeding while loop; the only other exit path in the loop is if the unimac MDIO is not busy. Remove the redundant zero timeout check and always return -ETIMEDOUT on this timeout return path. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
My recent patch had at least three problems : 1) TX zerocopy wants notification when skb is acknowledged, thus we need to call skb_zcopy_clear() if the skb is cached into sk->sk_tx_skb_cache 2) Some applications might expect precise EPOLLOUT notifications, so we need to update sk->sk_wmem_queued and call sk_mem_uncharge() from sk_wmem_free_skb() in all cases. The SOCK_QUEUE_SHRUNK flag must also be set. 3) Reuse of saved skb should have used skb_cloned() instead of simply checking if the fast clone has been freed. Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Numan Siddique authored
This patch adds a new action - 'check_pkt_len' which checks the packet length and executes a set of actions if the packet length is greater than the specified length or executes another set of actions if the packet length is lesser or equal to. This action takes below nlattrs * OVS_CHECK_PKT_LEN_ATTR_PKT_LEN - 'pkt_len' to check for * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER - Nested actions to apply if the packet length is greater than the specified 'pkt_len' * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested actions to apply if the packet length is lesser or equal to the specified 'pkt_len'. The main use case for adding this action is to solve the packet drops because of MTU mismatch in OVN virtual networking solution. When a VM (which belongs to a logical switch of OVN) sends a packet destined to go via the gateway router and if the nic which provides external connectivity, has a lesser MTU, OVS drops the packet if the packet length is greater than this MTU. With the help of this action, OVN will check the packet length and if it is greater than the MTU size, it will generate an ICMP packet (type 3, code 4) and includes the next hop mtu in it so that the sender can fragment the packets. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-July/047039.htmlSuggested-by:
Ben Pfaff <blp@ovn.org> Signed-off-by:
Numan Siddique <nusiddiq@redhat.com> CC: Gregory Rose <gvrose8192@gmail.com> CC: Pravin B Shelar <pshelar@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Tested-by:
Greg Rose <gvrose8192@gmail.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== ethtool: add support for Fast Link Down as new PHY tunable This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. This is the kernel-related series, the ethtool userspace extension I'd submit once the kernel part has been applied. v2: - add describing comment in patch 1 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
1000BaseT standard requires that a link is reported as down earliest after 750ms. Several use case however require a much faster detecion of a broken link. Fast Link Down supports this by intentionally violating a the standard. This patch exposes the Fast Link Down feature of 88E1540 and 88E6390. These PHY's can be found as internal PHY's in several switches: 88E6352, 88E6240, 88E6176, 88E6172, and 88E6390(X). Fast Link Down and EEE are mutually exclusive. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. v2: - add comment describing the constants Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
Instead of declaring a function in a .c file, declare it in a header file and include that header file from the source files that define and that use the function. That allows the compiler to verify consistency of declaration and definition. See also commit 52267790 ("sock: add MSG_ZEROCOPY") # v4.14. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'flags' not described in '__skb_flow_dissect' Cc: Tom Herbert <tom@herbertland.com> Fixes: cd79a238 ("flow_dissector: Add flags argument to skb_flow_dissector functions") # v4.3. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warnings are reported when building with W=1: net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl' Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 44c02a2c ("dev_ioctl(): move copyin/copyout to callers") # v4.16. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bart Van Assche authored
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'bind_inany' not described in 'reuseport_add_sock' Cc: Martin KaFai Lau <kafai@fb.com> Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") # v4.19. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This partially reverts ed8fe202 ("net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode"). I missed that chip->ports[].cmode is overwritten anyway by the cmode caching in mv88e6xxx_setup(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Commit 8fcf0ec44c11f "bnx2x: Add FW 7.13.11.0" added said .bin FW to linux-firmware; This patch incorporates the FW in the bnx2x driver. This introduces few FW fixes and the support for Tx VLAN filtering. Please consider applying it to 'net-next' tree. Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kristian Evensen authored
An FoU socket is currently bound to the wildcard-address. While this works fine, there are several use-cases where the use of the wildcard-address is not desirable. For example, I use FoU on some multi-homed servers and would like to use FoU on only one of the interfaces. This commit adds support for binding FoU sockets to a given source address/interface, as well as connecting the socket to a given destination address/port. udp_tunnel already provides the required infrastructure, so most of the code added is for exposing and setting the different attributes (local address, peer address, etc.). The lookups performed when we add, delete or get an FoU-socket has also been updated to compare all the attributes a user can set. Since the comparison now involves several elements, I have added a separate comparison-function instead of open-coding. In order to test the code and ensure that the new comparison code works correctly, I started by creating a wildcard socket bound to port 1234 on my machine. I then tried to create a non-wildcarded socket bound to the same port, as well as fetching and deleting the socket (including source address, peer address or interface index in the netlink request). Both the create, fetch and delete request failed. Deleting/fetching the socket was only successful when my netlink request attributes matched those used to create the socket. I then repeated the tests, but with a socket bound to a local ip address, a socket bound to a local address + interface, and a bound socket that was also «connected» to a peer. Add only worked when no socket with the matching source address/interface (or wildcard) existed, while fetch/delete was only successful when all attributes matched. In addition to testing that the new code work, I also checked that the current behavior is kept. If none of the new attributes are provided, then an FoU-socket is configured as before (i.e., wildcarded). If any of the new attributes are provided, the FoU-socket is configured as expected. v1->v2: * Fixed building with IPv6 disabled (kbuild). * Fixed a return type warning and make the ugly comparison function more readable (kbuild). * Describe more in detail what has been tested (thanks David Miller). * Make peer port required if peer address is specified. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-03-26 This series contains more updates to the ice driver only. Jeremiah provides his first patch to the Linux kernel to clean up un-necessary newlines in driver log messages. Mitch updates the ice driver to use existing status codes in the iavf driver so that when errors occur, it will not report nonsensical results. Adds support for VF admin queue interrupts by programming the VPINT_MBX_CTL register array. Brett adds a check for a bit that we set while preparing for a reset, to ensure we are prepared to do a proper reset. Also implemented PCI error handling operations. Went through and audited the hot path with pahole and made modifications based on the results since 2 structures were taking up more space than necessary due to cache alignment issues. Fixed an issue where when flow control was disabled, the state of flow control was being displayed as "Unknown". Anirudh fixes adaptive interrupt moderation changes by adding code that was missed, that should have been added in the initial patch to add that support. Cleaned up a function prototype that was never implemented. Did additional code cleanup by removing unneeded braces and redundant code comments. Akeem fixes an issue that occurs when the VF is attempting to remove the default LAN/MAC address, which is programmed by the administrator by updating the error message to explicitly say that the VF cannot change the MAC programmed by the PF. Preethi fixes the driver to not fall into the error path when a added filter already exists, but instead continue to process the rest of the function and add appropriate checks after adding MAC filters. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Maxime Chevallier says: ==================== net: mvpp2: Classifier updates and cleanups In preparation for the future addition of classification offload support, this series cleans-up the current code dealing with the classification engines. As of today, the classification code only deals with RSS, which is a very narrow use-case when considering all of the classifier's features. This lead to design and naming decisions that don't really stand when considering using more classification features. This series therefore includes quite a lot a renaming of functions and macros, and tries to make the naming schemes more consistent and the code more readable. The debugfs interface that allows reading the various Parsing and Classification engines has been cleaned-up and made more generic, allowing to read the Flow Table and C2 engine hit counters on a per-entry basis. The Classifier itself has been made more robust by introducing the lu_type field in classification lookups, that prevents false-positive matches in the future. We also initialise the various engine in a more extensive and less error-prone way by assining default values to all entries in the C2 and Flow table. This is a pretty big series considering it's mostly cleanup, but my goal is to make the future series that will contain new big features easier to review, focusing on the real logic. Besides the debugfs interface, this series doesn't intend to introduce any new features or change in behaviours. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The C2 classification engine has a 256 entry TCAM, used for ternary matches on an 8 byte Header Extracted Key. For now, we compute the various indices for classification and RSS that use this engine thanks to a set of macros. This commit mainly renames the macros used to make it clear that they should be used with the C2 engine, but also make use of the full 256 entries in the engine. For now, the C2 entries are only used for RSS. These entries are put at the end of the TCAM range, in case we want to add higher priority matches later on. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When classifying a packet pertaining to a given flow, the classifier will issue multiple lookup commands until it finds one with the 'last' bit set. It expects all prorities to be assign continuously (although not necessarily in an ordered fashion) from 0 to the number of lookups. We can initialize this once, and make sure unused lookups are given an empty port map. This avoids having to maintain priorities and the information of which lookup is the last. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
C2 TCAM entries can be invalidated to avoid unwanted matches. Make sure all entries are invalidated at init, then validate only the ones we use. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The Flow Table dictates what lookups will be issued for each flow type. The lookup sequence for each flow is similar, and the index of each lookup is computed by some macros. There are similar mechanisms for the C2 TCAM lookups, so in order to avoid confusion, rename the flow table index computing macros with a common prefix. The only difference in behaviour is that we now use the very first entry in the flow for the RSS lookup (the first entry was previously unused). Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The classifier allows to combine multiple lookups in one "sequence" that is counted as a single lookup to an engine, with a single result. We don't actually use that feature, so remove any places where we set this field, so that the classifier doesn't try to interpret these fields. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
This commit renames some of the classifier functions to follow the naming 'mvpp2_port_*' that's used for function that act on a given port. This commit is purely cosmetic. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
Move C2 read/write helpers higher in the file to ease future work that rely on these helpers Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When writing a C2 entry to hardware, some registers writes will only take effect when the TCAM_DATA4 register is written. This includes all C2 TCAM registers, and the C2 invalidate register. To make sure we always write C2 entries correctly, document that behaviour with a comment, and move TCAM writes to the end of the mvpp2_cls_c2_write helper. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The cls_table is a global read-only table containing the different parameters that are used by various tables in the classifier. It describes the links between the Header Parser, the decoding table and the flow_table. There are several possible way we want to iterate over that table, depending on wich classifier engine we want to configure. For the Header Parser, we want to iterate over each entry. For the Decoding table, we want to iterate over each entry having a unique flow_id. Finally, when configuring an ethtool flow, we want to iterate over each entry having a unique flow_id and that has a given flow_type. This commit introduces some iterator to both provide syntactic sugar and also clarify the way we want to iterate over the table. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
PPv2's Classifier uses multiple engines to perform classification. So far, only the C2 engine is used, which has a 256 entries TCAM. So far, we only accessed the relevant entries from the C2 engines, which are the one implementing RSS. To implement and debug ntuple classification offload, beaing able to see the hit count for each C2 entry is helpful, so this commit moves the logic to a dedicated directory allowing to access each entry. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The Classifier flow table is the central part of the PPv2 Classifier, since it describes all classification steps performed for each flow. It has 512 entries, shared between all ports, which are divided into sequences that are pointed-to by the decoding table. Being able to see which entries in the flow table were hit is a key point when implementing and debugging classification offload. This commit allows reading each flow table entry's hit count independently, with a clear-on-read behaviour. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The current way to store the required private data needed to access various debugfs entries is to alloc them on the fly, share them within the entries that need to access them, and finally have one entry free that data upon closing. This leads to hard to maintain code, and is very error-prone. This commit stores all debugfs related data in the same place, making sure this is allocated only when the debugfs directory is successfully created, so that we don't waste memory when we don't use this feature. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The cls_flow table represent the overall configuration of the classifier, used to match the different traffic classes in the Parsing and Classification engines. This configuration is static, and applies to all PPv2 instances, we must therefore keep it const so that no modifications of this table are performed at runtime. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The macro definition MVPP2_N_FLOWS is ambiguous because it really represents the number of entries in the Header Parser that are used to identify the classification flows. Rename the macro to clearly state that we represent the number of flows in the Header Parser. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The PPv2 classifier allows to perform multiple lookups on the same engine when classifying a packet. These lookups can match similar parts of a packet header, but perform different actions upon matching. To differentiate these types of lookups, it's possible to specify a Lookup Type in the flow table entries, which will be part of the key for the lookup engines. This commit introduces the use of Lookup Types for C2 matches. Since for now we only perform C2 lookups to enable RSS, we only need one Lookup Type. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
The Classifier flow table has 512 entries, that contains lookups commands executed consecutively for every flow. Since we have 21 different flows, we have to carefully manage the flow table use. As of today, the start index of a lookup sequence is computed directly based in the flow->id. There are 8 reserved flow ids, from 0-7, which don't have any corresponding sequence in the flow table. We can therefore ignore them when computing the index, and make so that the first non-reserved flow point to the very beginning of the flow table. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by:
Alan Winkowski <walan@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
PPv2's classifier supports extracting the MAC Destination Address from the L2 header to perform RSS and flow steering. Add the missing case when setting the Header Extracted Key fields in the flow table. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
int is not long enough to store all netdev_features, use the correct dedicated type to store them when building the list of dev->features. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-03-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) introduce bpf_tcp_check_syncookie() helper for XDP and tc, from Lorenz. 2) allow bpf_skb_ecn_set_ce() in tc, from Peter. 3) numerous bpf tc tunneling improvements, from Willem. 4) and other miscellaneous improvements from Adrian, Alan, Daniel, Ivan, Stanislav. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Mar, 2019 1 commit
-
-
Anirudh Venkataramanan authored
Some enums in ice_tx_desc_cmd_bits have a trailing /* 2 BITS */ comment, but the value has just one bit set (ex. ICE_TX_DESC_CMD_L4T_EOFT_SCTP has the value 0x200 (i.e. only bit 9 is set). This is confusing and misleading. So remove the comment. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-