Merge tag 'davinci-for-v4.5/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Merge "DaVinci device-tree updates for v4.5" from Sekhar Nori:

EDMA device-tree updates including move to
new EDMA bindings and EDMA support for MMC/SD
and SPI.

* tag 'davinci-for-v4.5/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: DTS: da850: Enable DMA for SPI1
  ARM: DTS: da850: Add node for mmc1
  ARM: DTS: da850: Enable DMA use for MMC0
  ARM: DTS: da850: Enable eDMA1
  ARM: DTS: da850: Use the new DT bindings for the eDMA3
  ARM: DTS: da850: fix edma0 reg space

Merge tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "reworked dts changes for ti81xx devices and minimal
dra62x j5ec-evm support" from Tony Lindgren:

Add minimal device tree support for dra62x also known j5eco. It is
related to dm814x, just the clocks are a bit different and it has a
different set of integrated devices. And let's get some basic dm814x
and dra62x devices working as many of the devices are like on am33xx::

- pinctrl using the pinctrl defines as for am33xx

- Updated EDMA bindings with support for using exma_xbar

- MMC support for dm814x-evm, t410 and dra62x-j5eco-evm

- USB support for dm814x-evm, t410 and dra62x-j5eco-evm

This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed
branch that has dm814x dts fixes interlaced with SoC related fixes to
keep things booting. The interlaced SoC and dts fixes were needed
because of issues with the device tree defined clocks that just
happened to work on bootloader timings for t410 earlier.

* tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: Add usb support for j5-eco evm
  ARM: dts: Add usb support for hp t410
  ARM: dts: Add usb support for dm814x-evm
  ARM: dts: Add usb support for dm814x and dra62x
  ARM: dts: Enable emmc on hp t410
  ARM: dts: Add mmc support for dra62x j5-eco evm
  ARM: dts: Add mmc support for dm8148-evm
  ARM: dts: Add mmc device entries for dm814x
  ARM: dts: Update edma bindings on dm814x to use edma_xbar
  ARM: dts: Add pinctrl macros for dm814x
  ARM: dts: Add minimal dra62x j5-eco evm support
  ARM: dts: Add basic support for dra62x j5-eco SoC
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ...

Add the needed bindings so the SPI driver can use DMA with SPI1.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

da850 has two MMC controller, MMCSD1 is served by eDMA1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Add the needed bindings for MMC0 in order to be able to utilize the DMA
instead of PIO mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The eDMA1 in da850 has only one TPTC and for example MMC1 is HW events are
handled by it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.
Using the new binding will allow us to reserve PaRAM slots to be used by
the DSP which was not possible before and prevented the da850 boards to be
moved to DT only.

Note that the DMA memcpy is disabled, it can be enabled by reserving
channels for memcpy by adding the following property to the edma node:
ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The size of the eDMA0 CC register space is 0x8000 and not 0x10000.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Add usb support for j5-eco evm.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add usb support for hp t410 and a fixed regulator for the hub power.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add usb support for dm814x-evm

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The usb is very much like on am33xx, we just put the some of the
componends under scm where they belong.

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There's a 2GB emmc on hp t410 that's wired to the sd_2 interface.
Note that we also need to configure the evtmux using edma_xbar for
edma channels.

Let's use the McASP2 channels like the original kernel seems to be
doing, most likely the audio on t410 is different from dm814x-evm.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There's mmc interface on j5-eco evm that's wired to the
sd_1 interface.
Signed-off-by: Tony Lindgren <tony@atomide.com>

There is a mmc slot on the dm8148-evm that's wired to the sd_1
interface.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add mmc device entries for dm814x.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The edma is the same as on am33xx, except it has four tptc
instances. And we need the edma_xbar for at least mmc3, so
let's use the edma_xbar and the new binding as suggested by
Peter Ujfalusi <peter.ujfalusi@ti.com>.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated for ti,edma-memcpy-channels binding]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Let's add the DM814X_IOPAD macro the same way as we have for dm816x and
am33xx as this allows comparing the registers with the documentation easily.
The pinctrl bits are yet again different on dm814x.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This allows us to boot dra62x j5-eco evm with NFSroot.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The dra762x j5-eco is similar to dm814x with a bit different clocks
and devices.

[tony@atomide.com: updated to leave out adpll clock driver references]
Signed-off-by: Tony Lindgren <tony@atomide.com>

This device tree was tested on a Sigma Designs SMP8758 Vantage-1172
Rev E1 development board.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT patches, round 2

Mostly some audio codec patches to enable it on more boards, and a bunch
devices activation (Ethernet, touchscreen, backlights). One more board has
been added too.

* tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
  ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
  ARM: dt: sun7i: Enable audio codec on MK808C
  ARM: sunxi: dt: enable audio codec on mk802
  ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
  ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
  ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
  ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
  ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration
  ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet
  ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Second batch of DT changes for 4.5:
- addition of sound nodes for sama5d2 and the xplained
- addition of a new patform by Landis+Gyr: VInCo

* tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91/dt: sama5d2 Xplained: add pdmic node
  ARM: at91/dt: sama5d2: add pdmic node
  ARM: at91/dt: Add Support for the L+G VInCo platform
Signed-off-by: Olof Johansson <olof@lixom.net>

The i.MX device tree updates for 4.5:
- New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC,
  vf610m4-cosmic
- Add ADC device support for imx6ul and imx7d
- Remove config space from PCIe controller ranges property for i.MX6
- Add Vivante GPU nodes for i.MX6
- Add DCU, LCD, and SATA devices for LS1021A
- A series to update Ventana gw5xxx boards getting HDMI and LVDS to work
  simultaneously and devices like PWM and SPI added
- Quite a few random cleanups and minor updates

* tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
  ARM: dts: imx7d: sbc-imx7: add basic board support
  ARM: dts: imx7d: cl-som-imx7: add basic module support
  ARM: dts: TS-4800: add touchscreen support
  ARM: dts: ts-4800: Add LCD support
  ARM: dts: imx6q: add Novena board
  devicetree: bindings: Add vendor prefix for Kosagi
  ARM: dts: TS-4800: use weim IP to map the FPGA
  ARM: dts: TS-4800: drop uart rts/cts pin reservations
  ARM: dts: imx6: add Vivante GPU nodes
  ARM: dts: imx28: add alternate auart4 pinmux
  ARM: dts: ls1021a: add sata node to dts
  ARM: dts: TS-4800: add basic device tree
  of: documentation: add bindings documentation for TS-4800
  of: add vendor prefix for Technologic Systems
  ARM: dts: imx7d-sdb: add ADC support
  ARM: dts: imx7d.dtsi: add ADC support
  ARM: dts: vf-colibri: add CAN support
  ARM: mxs: dt: cfa10057: fix backlight PWM
  ARM: dts: imx6qdl: move GIC to right location in DT
  ARM: dts: imx6qdl: add IPU aliases
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of omap device tree changes for v4.5 merge window. This series
updates the EDMA bindings based on the various fixes to split EDMA into
separate independent devices. It also adds support for more devices on the
CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings
for qspi for am437x and dra7. There are also few dra7 regulator fixes, and
change of gpoi-key,wakeup to wakeup-source.

These depend on commit ae0add74 ("dmaengine: edma: DT: Change reserved
slot array from 16bit to 32bit type") already merged into mainline.

* tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
  ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9
  ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2
  ARM: dts: AM4372: add entry for qspi mmap region
  ARM: dts: DRA7: add entry for qspi mmap region
  ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries
  ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth
  ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support
  ARM: dts: cm-t335: add support for bluetooth
  ARM: dts: cm-t335: add support for DVI/LCD
  ARM: dts: cm-t335: add support for I2C GPIO expander
  ARM: dts: cm-t335: add support for SBC-T335
  ARM: dts: cm-t335: add support for USB0
  ARM: dts: omap: replace legacy *,wakeup property with wakeup-source
  ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property
  ARM: DTS: am437x: Use the new DT bindings for the eDMA3
  ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
  dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type
  dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS update for v4.5, part 2
- clean up mcvevk dts file, replace space with tab
- Disable SDMMC node in base socfpga.dtsi file

* tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: dts: Enable MMC support at correct place in the DT
  ARM: socfpga: Repair incorrectly applied MCV patch
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board,
support for the efuses on Rockchip socs and some improvements for
rk3288 regulators.

* tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add the kylin board for rk3036
  ARM: dts: rockchip: add the sdio/sdmmc node for rk3036
  ARM: dts: rockchip: fix the pinctrl bias settings for rk3036
  ARM: dts: rockchip: add eFuse node for rk3188 SoCs
  ARM: dts: rockchip: add eFuse node for rk3066a SoCs
  ARM: dts: rockchip: add eFuse config of rk3288 SoC
  ARM: dts: rockchip: add rk3228-evb board
  ARM: dts: rockchip: add core rk3228 dtsi
  clk: rockchip: Add the clock ids of rk3288 eFuses
  ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name
  ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board
  ARM: dts: rockchip: move the public part to rk3288-evb common
  ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846
  ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
  clk: rockchip: add dt-binding header for rk3228
  clk: rockchip: add id for mipidsi sclk on rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>

Device Tree additions for LPC18xx platform

NXP LPC18xx EEPROM support plus board updates for CIAA board and
EA4357 Dev kit.

* tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc:
  ARM: dts: lpc4337-ciaa: add i2c0 and devices
  ARM: dts: lpc4337-ciaa: enable SCT-PWM
  ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer
  ARM: dts: lpc4357: enable EEPROM memory
  ARM: dts: lpc18xx: add EEPROM memory node
Signed-off-by: Olof Johansson <olof@lixom.net>

Add regulators to the scpsys binding.

Move the include of the reset contoller to include/dt-bindings/reset.

Add basic support for mt2701 SoC and evaluation board.

* tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek:
  dt-bindings: soc: Add supplies for Mediatek SCPSYS unit
  ARM: mediatek: DT: Move reset controller constants into common location
  ARM: dts: mediatek: add MT2701 basic support
  Document: DT: Add bindings for mediatek MT2701 SoC Platform
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 4.5 (part 3)

Add dts for the following boards:
- Zyxel NSA325
- PogoPlug series 4
Add GPU support for Dove
Update boolean property to wakeup source for isil

* tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property
  ARM: dts: enable GPU for SolidRun's Cubox
  ARM: dts: dove: add DT GPU support
  ARM: mvebu: kirkwood: add PogoPlug series 4 device tree
  ARM: mvebu: add kirkwood compatibles for cloudengine boards
  ARM: dts: kirkwood: Add DTS for Zyxel NSA325
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Third Round of Renesas ARM Based SoC DT Updates for v4.5

* Use SoC-specific usb-dmac and IPMMU compatibility strings
* Add internal delay for i2c IPs
* Add missing serial devices to r8a7793
* Enable DMA for r8a7793 serial devices
* Add serial port config to chosen/stdout-path
* Tidyup #sound-dai-cells settings for r8a7798/bockw
* Remove deprecated #gpio-range-cells from r8a7793
* Add EtherAVB support to r8a7791
* Add MSIOF support to sh73a0

* tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits)
  ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings
  ARM: shmobile: r8a7794: IPMMU compat string SoC part number update
  ARM: shmobile: r8a7793: IPMMU compat string SoC part number update
  ARM: shmobile: r8a7791: IPMMU compat string SoC part number update
  ARM: shmobile: r8a7790: IPMMU compat string SoC part number update
  ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs
  ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs
  ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs
  ARM: shmobile: r8a7793: Describe DMA for the serial ports
  ARM: shmobile: r8a7793: Add missing serial devices to DT
  ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: bockw dts: Update console parameters
  ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path
  ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings
  ARM: shmobile: bockw dts: Override #sound-dai-cells to zero
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm ARM Based Device Tree Updates for v4.5

* Add support for Sony Xperia Z
* Updates for Sony Honami board
* Updates for APQ8064 generic platform
* Updates for MSM8974 generic platform
* Add fixed rate oscillators for MSM8960 and APQ8064
* Add documentation for SMSM and SMP2P
* Fixup PMIC compat strings
* Add support for SMEM, RPM/SMD on APQ8084
* Fixup compat on IFC5640

* tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits)
  arm: dts: Add support for PMA8084 on APQ8084
  arm: dts: Add RPM/SMD support on APQ8084
  arm: dts: Add APQ8084 SMEM nodes
  ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
  arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
  ARM: dts: qcom: msm8974: Add i2c8 node
  ARM: dts: qcom: msm8974: Disable wled and move it to honami
  arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
  arm: dts: qcom: Add aliases for PMICs
  arm: dts: qcom: Update ifc6540 compat for qcom boot format
  arm: dts: qcom: Add board clocks
  ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts
  ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
  ARM: dts: qcom: apq8064: Declare all pm8921 regulators
  ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
  dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation
  dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation
  devicetree: Add hardware rng entry to qcom-apq8064.dtsi
  ARM: dts: qcom: msm8974-honami: Specify charging parameters
  ARM: dts: qcom: msm8974-honami: Add uSD slot nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

First batch of DT changes for 4.5:
- addition of nodes for sama5d2 & sama5d4
- some fixes for i2c hold time, compatible stings
- addition of a new patform by DENX: the MA5D4 SoM and EVK

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time
  ARM: at91/dt: sama5d4: update i2c compatible string
  ARM: at91/dt: sama5d4 master clock can run at 200MHz now
  ARM: at91/dt: sama5d2: add watchdog node
  ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
  ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus
  ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.5

Allwinner device-tree related patches for the 4.5 merge window.
  * Support for the H3
  * Addition of the RSB to the relevant devices (sun8i, sun9i)
  * Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i)
  * Addition of the DRAM gates for the older SoCs (sun4i, sun7i)
  * Addition of the audio codec to a bunch of boards
  * New board: ICNova SWAC

* tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits)
  ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)
  ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
  ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller
  ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver
  ARM: dts: sun9i: cubieboard4: Enable LEDs
  ARM: dts: sun7i: Add VE (Video Engine) module clock node
  ARM: dts: sun4i: Add VE (Video Engine) module clock node
  ARM: dts: sun8i: Add Orange Pi Plus support
  ARM: dts: sunxi: Add Allwinner H3 DTSI
  ARM: dts: sun7i: Add DRAM gates
  ARM: dts: sun4i: Add DRAM gates
  ARM: dts: sun9i: Add NMI controller device node
  ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller
  ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
  ARM: dts: sun9i: optimus: Enable consumer IR receiver
  ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings
  ARM: dts: sun9i: optimus: Enable LED3
  ARM: dts: sun9i: Add A80 R_PIO pin controller device node
  ARM: dts: sun9i: Add TODO comments for the main and low power clocks
  ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arm: Xilinx Zynq dt patches for v4.5

- Various small DT changes, GPIO, slcr, cpu label

* tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx:
  ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
  ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
  ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
  ARM: zynq: DT: Add interrupt-controller property to GPIO
Signed-off-by: Olof Johansson <olof@lixom.net>

SBC-iMX7 is a single board computer designed for industrial
and embedded applications. It is based on the Freescale i.MX7
system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7
System-on-Module providing most of the functions, and SB-SOM-iMX7
carrier board providing additional peripheral functions and
connectors.

http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/

http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/

Add basic board support, including SD card as a secondary boot and storage device
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>

CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
Freescale i.MX7 System-on-Chip family.

http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/

Add basic DT support for standalone module (without a carrier board):

* Memory configuration
* eMMC
* 2x Gigabit Ethernet ports (FEC1 and FEC2)
* I2C2 bus
  * EEPROM
  * PCA9555 GPIO extender
  * PMIC
* UART1
* USB OTG port
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>

This commit enables the touchscreen on TS-4800, using the ts4800-ts
driver.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This commit adds LCD support for the TS-4800. The panel is an Okaya
RS800480T-7X0WQ and the timings have been extracted from Technologic
Systems' tree.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Novena is an open-hardware laptop/desktop/bare board.

See http://www.kosagi.com/w/index.php?title=Novena_Main_PageSigned-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>