- 11 Aug, 2020 3 commits
-
-
Juergen Gross authored
With support for 32-bit pv guests gone pure pv-code no longer needs to test for highmem. Dropping those tests removes the need for flushing in some places. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Juergen Gross authored
With 32-bit pv-guest support removed xen-asm_64.S can be merged with xen-asm.S Signed-off-by:
-
Juergen Gross authored
Xen is requiring 64-bit machines today and since Xen 4.14 it can be built without 32-bit PV guest support. There is no need to carry the burden of 32-bit PV guest support in the kernel any longer, as new guests can be either HVM or PVH, or they can use a 64 bit kernel. Remove the 32-bit Xen PV support from the kernel. Signed-off-by:
-
- 04 Aug, 2020 11 commits
-
-
Stefano Stabellini authored
dma_cache_maint is getting called passing a dma address which could be different from a physical address. Add a struct device* parameter to dma_cache_maint. Translate the dma_addr_t parameter of dma_cache_maint by calling dma_to_phys. Do it for the first page and all the following pages, in case of multipage handling. Signed-off-by:
Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-11-sstabellini@kernel.orgSigned-off-by:
-
Stefano Stabellini authored
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys. Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there. dma_cache_maint is fixed by the next patch. Signed-off-by:
-
Stefano Stabellini authored
With some devices physical addresses are different than dma addresses. To be able to deal with these cases, we need to call phys_to_dma on physical addresses (including machine addresses in Xen terminology) before returning them from xen_swiotlb_alloc_coherent and xen_swiotlb_map_page. We also need to convert dma addresses back to physical addresses using dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if we want to do any operations on them. Call dma_to_phys in is_xen_swiotlb_buffer. Introduce xen_phys_to_dma and call phys_to_dma in its implementation. Introduce xen_dma_to_phys and call dma_to_phys in its implementation. Call xen_phys_to_dma/xen_dma_to_phys instead of xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c. Everything is taken care of by these changes except for xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a few explicit phys_to_dma/dma_to_phys calls. Signed-off-by:
-
Stefano Stabellini authored
XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more complex than need to be. Remove the definition of XEN_PFN_PHYS and open code the cast in the one place where it is needed. Signed-off-by:
-
Stefano Stabellini authored
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by:
-
Stefano Stabellini authored
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by:
-
Stefano Stabellini authored
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by:
-
Stefano Stabellini authored
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by:
-
Stefano Stabellini authored
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by:
-
Stefano Stabellini authored
It is not strictly needed. Call virt_to_phys on xen_io_tlb_start instead. It will be useful not to have a start_dma_addr around with the next patches. Note that virt_to_phys is not the same as xen_virt_to_bus but actually it is used to compared again __pa(xen_io_tlb_start) as passed to swiotlb_init_with_tbl, so virt_to_phys is actually what we want. Signed-off-by:
-
Boris Ostrovsky authored
xen_alloc_coherent_pages might return pages for which virt_to_phys and virt_to_page don't work, e.g. ioremap'ed pages. So in xen_swiotlb_free_coherent we can't assume that virt_to_page works. Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc virt addresses. This patch fixes the following crash at boot on RPi4 (the underlying issue is not RPi4 specific): https://marc.info/?l=xen-devel&m=158862573216800Signed-off-by:
-
- 03 Aug, 2020 8 commits
-
-
Roger Pau Monne authored
This reverts commit dfd74a1e. This has been fixed by commit dca4436d which added the out of bounds check to __add_memory, so that trying to add blocks past MAX_PHYSMEM_BITS will fail. Note the check in the Xen balloon driver was bogus anyway, as it checked the start address of the resource, but it should instead test the end address to assert the whole resource falls below MAX_PHYSMEM_BITS. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
-
Roger Pau Monne authored
So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by:
-
Roger Pau Monne authored
target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by:
-
Randy Dunlap authored
Change the repeated word "as" to "as a". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Randy Dunlap authored
Drop the repeated word "of" in a comment. Signed-off-by:
-
Souptick Joarder authored
In 2019, we introduced pin_user_pages*() and now we are converting get_user_pages*() to the new API as appropriate. [1] & [2] could be referred for more information. This is case 5 as per document [1]. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/Signed-off-by:Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-4-git-send-email-jrdr.linux@gmail.comSigned-off-by:
-
Souptick Joarder authored
pages need to be marked as dirty before unpinned it in unlock_pages() which was oversight. This is fixed now. Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
-
Souptick Joarder authored
Previously, if lock_pages() end up partially mapping pages, it used to return -ERRNO due to which unlock_pages() have to go through each pages[i] till *nr_pages* to validate them. This can be avoided by passing correct number of partially mapped pages & -ERRNO separately, while returning from lock_pages() due to error. With this fix unlock_pages() doesn't need to validate pages[i] till *nr_pages* for error scenario and few condition checks can be ignored. Signed-off-by:
-
- 02 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "A single fix for a potential deadlock when printing a message about spurious interrupts" * tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/i8259: Use printk_deferred() to prevent deadlock
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - clean the generated moc file for xconfig - fix xconfig bugs, and revert some bad commits * tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove redundant FORCE definition in scripts/Makefile.modpost kconfig: qconf: remove wrong ConfigList::firstChild() Revert "kconfig: qconf: don't show goback button on splitMode" Revert "kconfig: qconf: Change title for the item window" kconfig: qconf: remove "goBack" debug message kconfig: qconf: use delete[] instead of delete to free array kconfig: qconf: compile moc object separately kconfig: qconf: use if_changed for qconf.moc rule modpost: explain why we can't use strsep
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bugfixes and strengthening the validity checks on inputs from new userspace APIs. Now I know why I shouldn't prepare pull requests on the weekend, it's hard to concentrate if your son is shouting about his latest Minecraft builds in your ear. Fortunately all the patches were ready and I just had to check the test results..." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled KVM: arm64: Don't inherit exec permission across page-table levels KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions KVM: nVMX: check for invalid hdr.vmx.flags KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE selftests: kvm: do not set guest mode flag
-
Masahiro Yamada authored
The same code exists a few lines above. Fixes: 436b2ac6 ("modpost: invoke modpost only when input files are updated") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
This function returns the first child object, but the returned pointer is not compatible with (ConfigItem *). Commit cc1c08ed ("kconfig: qconf: don't show goback button on splitMode") uncovered this issue because using the pointer from this function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411) This function does not work. Remove. Signed-off-by:
-
- 01 Aug, 2020 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca. 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn. 3) Fix several clang issues on powerpc in selftests, from Tanner Love. 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al Viro. 5) Out of bounds access in mlx5e driver, from Raed Salem. 6) Fix transfer buffer memleak in lan78xx, from Johan Havold. 7) RCU fixups in rhashtable, from Herbert Xu. 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang. 9) vxlan FDB dump must be done under RCU, from Ido Schimmel. 10) Fix use after free in mlxsw, from Ido Schimmel. 11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko. 12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar Thiagarajan. 13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang. 14) Fix bpf program reference count leaks in mlx5 during mlx5e_alloc_rq(), from Xin Xiong. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) vxlan: fix memleak of fdb rds: Prevent kernel-infoleak in rds_notify_queue_get() net/sched: The error lable position is corrected in ct_init_module net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq net/mlx5e: E-Switch, Specify flow_source for rule with no in_port net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring net/mlx5e: CT: Support restore ipv6 tunnel net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe() ionic: unlock queue mutex in error path atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent net: ethernet: mtk_eth_soc: fix MTU warnings net: nixge: fix potential memory leak in nixge_probe() devlink: ignore -EOPNOTSUPP errors on dumpit rxrpc: Fix race between recvmsg and sendmsg on immediate call failure MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer selftests/bpf: fix netdevsim trap_flow_action_cookie read ipv6: fix memory leaks on IPV6_ADDRFORM path net/bpfilter: Initialize pos in __bpfilter_process_sockopt igb: reinit_locked() should be called with rtnl_lock e1000e: continue to init PHY even when failed to disable ULP ... -
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull thread fix from Christian Brauner: "A simple spelling fix for dequeue_synchronous_signal()" * tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: signal: fix typo in dequeue_synchronous_signal()
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Fix libtraceevent build with binutils 2.35 - Fix memory leak in process_dynamic_array_len in libtraceevent - Fix 'perf test 68' zstd compression for s390 - Fix record failure when mixed with ARM SPE event * tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: libtraceevent: Fix build with binutils 2.35 perf tools: Fix record failure when mixed with ARM SPE event perf tests: Fix test 68 zstd compression for s390 tools lib traceevent: Fix memory leak in process_dynamic_array_len
-
Taehee Yoo authored
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush(). vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains all-zeros-mac because it is deleted by vxlan_uninit(). But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac and default vni. So, the fdb, which contains both all-zeros-mac and non-default vni will not be deleted. Test commands: ip link add vxlan0 type vxlan dstport 4789 external ip link set vxlan0 up bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \ src_vni 10000 self permanent ip link del vxlan0 kmemleak reports as follows: unreferenced object 0xffff9486b25ced88 (size 96): comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s) hex dump (first 32 bytes): 02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff ........@....... 46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b F.............jk backtrace: [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan] [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff9486b1c40080 (size 128): comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff ..........B..... 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fix from Linus Walleij: "A single last minute pin control fix to the Qualcomm driver fixing missing dual edge PCH interrupts" * tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
-
Masahiro Yamada authored
This reverts commit cc1c08ed. Maxim Levitsky reports 'make xconfig' crashes since that commit (https://lkml.org/lkml/2020/7/18/411) Or, the following is simple test code that makes it crash: menu "Menu" config FOO bool "foo" default y menuconfig BAR bool "bar" depends on FOO endmenu Select the Split View mode, and double-click "bar" in the right window, then you will see Segmentation fault. When 'last' is not set for symbolMode, the following code in ConfigList::updateList() calls firstChild(). item = last ? last->nextSibling() : firstChild(); However, the pointer returned by ConfigList::firstChild() does not seem to be compatible with (ConfigItem *), which seems another bug. I'd rather want to reconsider whether hiding the goback icon is the right thing to do. In the following test code, the Split View shows "Menu2" and "Menu3" in the right window. You can descend into "Menu3", but there is no way to ascend back to "Menu2" from "Menu3". menu "Menu1" config FOO bool "foo" default y menu "Menu2" depends on FOO menu "Menu3" config BAZ bool "baz" endmenu endmenu endmenu It is true that the goback button is currently not functional due to yet another bug, but hiding the problem is not the right way to go. Anyway, Segmentation fault is fatal. Revert the offending commit for now, and we should find the right solution. Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
This reverts commit 5752ff07. It added dead code to ConfigList:ConfigList(). The constructor of ConfigList has the initializer, mode(singleMode). if (mode == symbolMode) setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value"); else setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value"); ... always takes the else part. The change to ConfigList::updateSelection() is strange too. When you click the split view icon for the first time, the titles in both windows show "Option". After you click something in the right window, the title suddenly changes to "Item". ConfigList::updateSelection() is not the right place to do this, at least. It was not a good idea, I think. Signed-off-by:
-
Masahiro Yamada authored
Every time the goback icon is clicked, the annoying message "goBack" is displayed on the console. I guess this line is the left-over debug code of commit af737b4d ("kconfig: qconf: simplify the goBack() logic"). Signed-off-by:
-
Masahiro Yamada authored
cppcheck reports "Mismatching allocation and deallocation". $ cppcheck scripts/kconfig/qconf.cc Checking scripts/kconfig/qconf.cc ... scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc] delete data; ^ scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data char *data = new char[count + 1]; ^ scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data delete data; ^ scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc] delete data; ^ scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data char *data = new char[count + 1]; ^ scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data delete data; ^ Fixes: c4f7398b ("kconfig: qconf: make debug links work again") Reported-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Masahiro Yamada authored
Currently, qconf.moc is included from qconf.cc but they can be compiled independently. When you modify qconf.cc, qconf.moc does not need recompiling. Rename qconf.moc to qconf-moc.cc, and split it out as an independent compilation unit. Signed-off-by: -
Masahiro Yamada authored
Regenerate qconf.moc when the moc command is changed. This also allows 'make mrproper' to clean it up. Previously, it was not cleaned up because 'clean-files += qconf.moc' was missing. Now 'make mrproper' correctly cleans it up because files listed in 'targets' are cleaned. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-07-31 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 21 day(s) which contain a total of 5 files changed, 126 insertions(+), 18 deletions(-). The main changes are: 1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko. 2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no btf_vmlinux is available, from Peilin Ye. 3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig. 4) Fix a cgroup sockopt verifier test by specifying expected attach type, from Jean-Philippe Brucker. Note that when net gets merged into net-next later on, there is a small merge conflict in kernel/bpf/btf.c between commit 5b801dfb ("bpf: Fix NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree and commit 138b9a05 ("bpf: Remove btf_id helpers resolving") from the net-next tree. Resolve as follows: remove the old hunk with the __btf_resolve_helper_id() function. Change the btf_resolve_helper_id() so it actually tests for a NULL btf_vmlinux and bails out: int btf_resolve_helper_id(struct bpf_verifier_log *log, const struct bpf_func_proto *fn, int arg) { int id; if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux) return -EINVAL; id = fn->btf_id[arg]; if (!id || id > btf_vmlinux->nr_types) return -EINVAL; return id; } Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in the loop with regards to merge conflict resolution). ==================== Signed-off-by:
-
