o TX queues allocation was getting distributed equally among all the
  functions of the port including VFs and PF. Which was leading to failure
  in PF's multiple TX queues creation.

o Instead of dividing queues equally allocate one TX queue for each VF as VF
  doesn't support multiple TX queues.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Adapter requires that if the port is in loopback mode no traffic should
  be flowing through that port, so on arrival of Link up AEN, do not advertise
  Link up to the stack until port is out of loopback mode
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when read/write the 64bit data, the correct lock should be hold.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function llc_conn_ac_inc_vr_by_1() evaluates via macro
PDU_GET_NEXT_Vr() into ...

  llc_sk(sk)->vR = ++llc_sk(sk)->vR & 0xffffffffffffff7f

... but the order in which the side effects take place is
undefined because there is no intervening sequence point.

As llc_sk(sk)->vR is written in llc_sk(sk)->vR (assignment
left-hand side) and written in ++llc_sk(sk)->vR & 0xffffffffffffff7f
this might possibly yield undefined behavior.

The final value of llc_sk(sk)->vR is ambiguous, because,
depending on the order of expression evaluation, the
increment may occur before, after, or interleaved with
the assignment. In C, evaluating such an expression yields
undefined behavior.

Since we're doing the increment via PDU_GET_NEXT_Vr() macro
and the only place it is being used is from
llc_conn_ac_inc_vr_by_1(), in order to increment vR by 1
with a follow-up optimized modulo, rewrite the expression
into ((vR + 1) & CONST) in order to fix this.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

KR2 work-around is based on detecting non-KR2 devices which may not link up
in this mode. One such link-partner is the BCM8073 which has specific
advertisement characteristics in specific mode, and this condition was not set
correctly.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a problem where link is reported to be up when SFP+ module is plugged in
without cable. This occurs with specific module types which may generate
temporary TX_FAULT indication. Solution is to avoid changing any link parameters
when checking TX_FAULT indication while physical link is down.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BCM54618SE is used to advertise half-duplex even if HD was not requested by the
user. This change makes the legacy speed/duplex advertisement for this PHY
exactly according to the requested speed and duplex.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix Passive DAC detection for specific cables, such that even in case
SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a
passive DAC cable, since some cables don't have this indication.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a problem where 578xx-KR is unable to get link when connected to 1G link
partner. Two fixes were required:
One was to force CL37 sync_status low to prevent Warpcore from getting stuck in
CL73 parallel detect loop while link partner is sending.
Second fix was to enable auto-detect mode, thus allowing the Warpcore to select
the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73
when there's indication for it.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even with the quirks in commit dabdaf0c (mcs7830: Fix link state
detection) there are still spurious link-down events for some chips
where the false link-down events count go over a few hundreds.

This patch takes a more conservative approach and only looks at
link-down events where the link-down state is not combined with other
states (e.g. half/full speed, pending frames in SRAM or TX status
information valid). In all other cases we assume the link is up.

Tested on MCS7830CV-DA (USB ID 9710:7830).

Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Michael Leun <lkml20120218@newton.leun.net>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the vlan code detects that the real device can do TX VLAN offloads
in hardware, it tries to arrange for the real device's header_ops to
be invoked directly.

But it does so illegally, by simply hooking the real device's
header_ops up to the VLAN device.

This doesn't work because we will end up invoking a set of header_ops
routines which expect a device type which matches the real device, but
will see a VLAN device instead.

Fix this by providing a pass-thru set of header_ops which will arrange
to pass the proper real device instead.

To facilitate this add a dev_rebuild_header().  There are
implementations which provide a ->cache and ->create but not a
->rebuild (f.e. PLIP).  So we need a helper function just like
dev_hard_header() to avoid crashes.

Use this helper in the one existing place where the
header_ops->rebuild was being invoked, the neighbour code.

With lots of help from Florian Westphal.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull devicetree fixes from Rob Herring:
 - Fix 2 regressions found on PPC
 - Allow NULL ptr in unflatten_and_copy_device_tree
 - Update my email address

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: Update Rob Herring's email address
  of/irq: Fix device_node refcount in of_irq_parse_raw()
  of/Kconfig: Spelling s/one/once/
  Revert "of/address: Handle #address-cells > 2 specially"
  of: Fix NULL dereference in unflatten_and_copy()

Pull powerpc fixes from Ben Herrenschmidt:
 "A bit more endian problems found during testing of 3.13 and a few
  other simple fixes and regressions fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix alignment of secondary cpu spin vars
  powerpc: Align p_end
  powernv/eeh: Add buffer for P7IOC hub error data
  powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
  powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
  powerpc: Make unaligned accesses endian-safe for powerpc
  powerpc: Fix bad stack check in exception entry
  powerpc/512x: dts: disable MPC5125 usb module
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)

Pull networking fixes from David Miller:
 "Some holiday bug fixes for 3.13...  There is still one bug I'd like to
  get fixed before 3.13-final.

  The vlan code erroneously assignes the header ops of the underlying
  real device to the VLAN device above it when the real device can
  hardware offload VLAN handling.  That's completely bogus because
  header ops are tied to the device type, so they only expect to see a
  'dev' argument compatible with their ops.

  The fix is the have the VLAN code use a special set of header ops that
  does the pass-thru correctly, by calling the underlying real device's
  header ops but _also_ passing in the real device instead of the VLAN
  device.

  That fix is currently waiting some testing.

  Anyways, of note here:

   1) Fix bitmap edge case in radiotap, from Johannes Berg.

   2) Fix oops on driver unload in rtlwifi, from Larry Finger.

   3) Bonding doesn't do locking correctly during speed/duplex/link
      changes, from Ding Tianhong.

   4) Fix header parsing in GRE code, this bug has been around for a few
      releases.  From Timo Teräs.

   5) SIT tunnel driver MTU check needs to take GSO into account, from
      Eric Dumazet.

   6) Minor info leak in inet_diag, from Daniel Borkmann.

   7) Info leak in YAM hamradio driver, from Salva Peiró.

   8) Fix route expiration state handling in ipv6 routing code, from Li
      RongQing.

   9) DCCP probe module does not check request_module()'s return value,
      from Wang Weidong.

  10) cpsw driver passes NULL device names to request_irq(), from
      Mugunthan V N.

  11) Prevent a NULL splat in RDS binding code, from Sasha Levin.

  12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.

  13) Cure use after free in arc_emac and fec driver's software
      timestamp handling, from Eric Dumazet.

  14) SIT driver can fail to release the route when
      iptunnel_handle_offloads() throws an error.  From Li RongQing.

  15) Several batman-adv fixes from Simon Wunderlich and Antonio
      Quartulli.

  16) Fix deadlock during TIPC socket release, from Ying Xue.

  17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
      Florian Westphal.

  18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  stmmac: Fix incorrect spinlock release and PTP cap detection.
  phy: IRQ cannot be shared
  net: rose: restore old recvmsg behavior
  xen-netback: fix guest-receive-side array sizes
  fec: Do not assume that PHY reset is active low
  tipc: fix deadlock during socket release
  netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
  batman-adv: fix vlan header access
  batman-adv: clean nf state when removing protocol header
  batman-adv: fix alignment for batadv_tvlv_tt_change
  batman-adv: fix size of batadv_bla_claim_dst
  batman-adv: fix size of batadv_icmp_header
  batman-adv: fix header alignment by unrolling batadv_header
  batman-adv: fix alignment for batadv_coded_packet
  netfilter: nf_tables: fix oops when updating table with user chains
  netfilter: nf_tables: fix dumping with large number of sets
  ipv6: release dst properly in ipip6_tunnel_xmit
  netxen: Correct off-by-one errors in bounds checks
  net: Add some clarification to skb_tx_timestamp() comment.
  arc_emac: fix potential use after free
  ...

My Calxeda email address is going away.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Commit 23616132, "of/irq: Refactor interrupt-map parsing" changed
the refcount on the device_node causing an error in of_node_put():

ERROR: Bad of_node_put() on /pci@800000020000000
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2
Call Trace:
[c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable)
[c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4
[c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0
[c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280
[c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0
[c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0
[c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0
[c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0
[c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410
[c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4

This patch adjusts the refcount in the walk of the interrupt tree.
When a match is found, there is no need to increase the refcount
on 'out_irq->np' as 'newpar' is already holding a ref. The refcount
balance between 'ipar' and 'newpar' is maintained in the skiplevel:
goto label.

This patch also removes the usage of the device_node variable 'old'
which seems useless after the latest changes.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Rob Herring <robh@kernel.org>

This reverts commit e38c0a1f.

Nikita Yushchenko reports:
While trying to make freescale p2020ds and  mpc8572ds boards working
with mainline kernel, I faced that commit e38c0a1f (Handle

Both these boards have uli1575 chip.
Corresponding part in device tree is something like

                uli1575@0 {
                        reg = <0x0 0x0 0x0 0x0 0x0>;
                        #size-cells = <2>;
                        #address-cells = <3>;
                        ranges = <0x2000000 0x0 0x80000000
                                  0x2000000 0x0 0x80000000
                                  0x0 0x20000000

                                  0x1000000 0x0 0x0
                                  0x1000000 0x0 0x0
                                  0x0 0x10000>;
                        isa@1e {
...

I.e. it has #address-cells = <3>

With commit e38c0a1f reverted, devices under uli1575 are registered
correctly, e.g. for rtc

OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
OF: translating address: 00000001 00000070
OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
OF: walking ranges...
OF: ISA map, cp=0, s=1000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 00000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
OF: walking ranges...
OF: default map, cp=a0000000, s=20000000, da=70
OF: default map, cp=0, s=10000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 01000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000
OF: walking ranges...
OF: PCI map, cp=0, s=10000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 01000000 00000000 00000070
OF: parent bus is default (na=2, ns=2) on /
OF: walking ranges...
OF: PCI map, cp=0, s=10000, da=70
OF: parent translation for: 00000000 ffc10000
OF: with offset: 70
OF: one level translation: 00000000 ffc10070
OF: reached root node

With commit e38c0a1f in place, address translation fails:

OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
OF: translating address: 00000001 00000070
OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
OF: walking ranges...
OF: ISA map, cp=0, s=1000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 00000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
OF: walking ranges...
OF: default map, cp=a0000000, s=20000000, da=70
OF: default map, cp=0, s=10000, da=70
OF: not found !

Thierry Reding confirmed this commit was not needed after all:
"We ended up merging a different address representation for Tegra PCIe
and I've confirmed that reverting this commit doesn't cause any obvious
regressions. I think all other drivers in drivers/pci/host ended up
copying what we did on Tegra, so I wouldn't expect any other breakage
either."

There doesn't appear to be a simple way to support both behaviours, so
reverting this as nothing should be depending on the new behaviour.

Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Rob Herring <robh@kernel.org>

Anatolij writes:

Please pull two DTS fixes for MPC5125 tower board. Without
them the v3.13-rcX kernels do not boot.

This patch corrects a problem in stmmac_ptp.c, functions
stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks
were released. This patch also addresses a problem in stmmac_main,
function stmmac_init_ptp where the capability detection for
advanced timestamping was masked by message masking.

This patch was touch tested using linuxptp, and runs without the previously
observed instabilities. More extensive testing is ongoing.

Vince
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the way PHY IRQ handler is implemented (all real handling being pushed to
the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot
really claim that PHY IRQ can be shared when calling request_irq().
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen.

After commit f3d33426
(net: rework recvmsg handler msg_name and msg_namelen logic), we now
always take the else branch due to namelen being initialized to 0.

Digging in netdev-vger-cvs git repo shows that msg_namelen was
initialized with a fixed-size since at least 1995, so the else branch
was never taken.

Compile tested only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sizes chosen for the metadata and grant_copy_op arrays on the guest
receive size are wrong;

- The meta array is needlessly twice the ring size, when we only ever
  consume a single array element per RX ring slot
- The grant_copy_op array is way too small. It's sized based on a bogus
  assumption: that at most two copy ops will be used per ring slot. This
  may have been true at some point in the past but it's clear from looking
  at start_new_rx_buffer() that a new ring slot is only consumed if a frag
  would overflow the current slot (plus some other conditions) so the actual
  limit is MAX_SKB_FRAGS grant_copy_ops per ring slot.

This patch fixes those two sizing issues and, because grant_copy_ops grows
so much, it pulls it out into a separate chunk of vmalloc()ed memory.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not assume that the PHY reset is always active low.

Retrieve this information from the device tree instead, so that the PHY reset
can work on both cases.
Reported-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A deadlock might occur if name table is withdrawn in socket release
routine, and while packets are still being received from bearer.

       CPU0                       CPU1
T0:   recv_msg()               release()
T1:   tipc_recv_msg()          tipc_withdraw()
T2:   [grab node lock]         [grab port lock]
T3:   tipc_link_wakeup_ports() tipc_nametbl_withdraw()
T4:   [grab port lock]*        named_cluster_distribute()
T5:   wakeupdispatch()         tipc_link_send()
T6:                            [grab node lock]*

The opposite order of holding port lock and node lock on above two
different paths may result in a deadlock. If socket lock instead of
port lock is used to protect port instance in tipc_withdraw(), the
reverse order of holding port lock and node lock will be eliminated,
as a result, the deadlock is killed as well.
Reported-by: Lars Everbrand <lars.everbrand@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5c0484e2 ('powerpc: Endian safe trampoline') resulted in
losing proper alignment of the spinlock variables used when booting
secondary CPUs, causing some quite odd issues with failing to boot on
PA Semi-based systems.

This showed itself on ppc64_defconfig, but not on pasemi_defconfig,
so it had gone unnoticed when I initially tested the LE patch set.

Fix is to add explicit alignment instead of relying on good luck. :)

[ It appears that there is a different issue with PA Semi systems
  however this fix is definitely correct so applying anyway -- BenH
]

Fixes: 5c0484e2 ('powerpc: Endian safe trampoline')
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67811Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

p_end is an 8 byte value embedded in the text section. This means it
is only 4 byte aligned when it should be 8 byte aligned. Fix this
by adding an explicit alignment.

This fixes an issue where POWER7 little endian builds with
CONFIG_RELOCATABLE=y fail to boot.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Prevent ioda_eeh_hub_diag() from clobbering itself when called by supplying
a per-PHB buffer for P7IOC hub diagnostic data.  Take care to inform OPAL of
the correct size for the buffer.

[Small style change to the use of sizeof -- BenH]
Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

PHB diagnostic buffer may be smaller than PAGE_SIZE, especially when
PAGE_SIZE > 4KB.
Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The powerpc 64-bit __copy_tofrom_user() function uses shifts to handle
unaligned invocations.  However, these shifts were designed for
big-endian systems: On little-endian systems, they must shift in the
opposite direction.

This commit relies on the C preprocessor to insert the correct shifts
into the assembly code.

[ This is a rare but nasty LE issue. Most of the time we use the POWER7
optimised __copy_tofrom_user_power7 loop, but when it hits an exception
we fall back to the base __copy_tofrom_user loop. - Anton ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The generic put_unaligned/get_unaligned macros were made endian-safe by
calling the appropriate endian dependent macros based on the endian type
of the powerpc processor.
Signed-off-by: Rajesh B Prathipati <rprathip@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1)
is valid when coming from the kernel.  If it's not valid, we die but
with a nice oops message.

Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we
check to see if the stack pointer is negative.  Unfortunately, this
won't detect a bad stack where r1 is less than INT_FRAME_SIZE.

This patch fixes the check to compare the modified r1 with
-INT_FRAME_SIZE.  With this, bad kernel stack pointers (including NULL
pointers) are correctly detected again.

Kudos to Paulus for finding this.
Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull ARM SoC fixes from Olof Johansson:
 "Another smallish batch of fixes, it's been quiet due to the holidays.
  Nothing controversial here, a handful of things across the board"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: pxa: fix USB gadget driver compilation regression
  ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
  ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
  ARM: shmobile: r8a7790: fix shdi resource sizes
  ARM: shmobile: bockw: fixup DMA mask
  ARM: shmobile: armadillo: Add PWM backlight power supply

Pull x86 fixes from Peter Anvin:
 "There is a small EFI fix and a big power regression fix in this batch.

  My queue also had a fix for downing a CPU when there are insufficient
  number of IRQ vectors available, but I'm holding that one for now due
  to recent bug reports"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Don't select EFI from certain special ACPI drivers
  x86 idle: Repair large-server 50-watt idle-power regression

Pull ACPI and power management fixes and new device IDs from Rafael Wysocki:

 - Fix for a cpufreq regression causing stale sysfs files to be left
   behind during system resume if cpufreq_add_dev() fails for one or
   more CPUs from Viresh Kumar.

 - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be
   ignored when the intel_pstate driver is used from Jason Baron.

 - System suspend fix for a memory leak in pm_vt_switch_unregister()
   that forgot to release objects after removing them from
   pm_vt_switch_list.  From Masami Ichikawa.

 - Intel Valley View device ID and energy unit encoding update for the
   (recently added) Intel RAPL (Running Average Power Limit) driver from
   Jacob Pan.

 - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power
   Subsystem (LPSS) ACPI driver from Paul Drews.

* tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap / RAPL: add support for ValleyView Soc
  PM / sleep: Fix memory leak in pm_vt_switch_unregister().
  cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers
  cpufreq: remove sysfs files for CPUs which failed to come back after resume
  ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs

Included changes:

- reset netfilter-bridge state when removing the batman-adv
  header from an incoming packet. This prevents netfilter
  bridge from being fooled when the same packet enters a
  bridge twice (or more): the first time within the
  batman-adv header and the second time without.

- adjust the packet layout to prevent any architecture from
  adding padding bytes. All the structs sent over the wire
  now have size multiple of 4bytes (unless pack(2) is used).

- fix access to the inner vlan_eth header when reading the
  VID in the rx path.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

This patchset contains four nf_tables fixes, one IPVS fix due to
missing updates in the interaction with the new sedadj conntrack
extension that was added to support the netfilter synproxy code,
and a couple of one-liners to fix netnamespace netfilter issues.
More specifically, they are:

* Fix ipv6_find_hdr() call without offset being explicitly initialized
  in nft_exthdr, as required by that function, from Daniel Borkmann.

* Fix oops in nfnetlink_log when using netns and unloading the kernel
  module, from Gao feng.

* Fix BUG_ON in nf_ct_timestamp extension after netns is destroyed,
  from Helmut Schaa.

* Fix crash in IPVS due to missing sequence adjustment extension being
  allocated in the conntrack, from Jesper Dangaard Brouer.

* Add bugtrap to spot a warning in case you deference sequence adjustment
  conntrack area when not available, this should help to catch similar
  invalid dereferences in the Netfilter tree, also from Jesper.

* Fix incomplete dumping of sets in nf_tables when retrieving by family,
  from me.

* Fix oops when updating the table state (dormant <-> active) and having
  user (not base ) chains, from me.

* Fix wrong validation in set element data that results in returning
  -EINVAL when using the nf_tables dictionary feature with mappings,
  also from me.

We don't usually have this amount of fixes by this time (as we're already
in -rc5 of the development cycle), although half of them are related to
nf_tables which is a relatively new thing, and I also believe that holidays
have also delayed the flight of bugfixes to mainstream a bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Fix a regression for wrong interrupt numbers for some devices after
the sparse IRQ conversion, fix DRA7 console output for earlyprintk,
and fix the LDP LCD backlight when DSS is built into the kernel and
not as a loadable module.

* tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
  ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL
  + v3.13-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>