Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

during suspend/resume ath9k_stop will always call ath_radio_disable
which will inturn call ath9k_hw_configpcipowersave, so no need to call
it explicitly in ath9k_stop
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Patch 7f1f9742 "iwlegacy: refactor iwl4965_mac_channel_switch"
reversed a test and also it changed a spin_lock_irq() to
spin_lock().  I assume the spin_lock change was a mistake because
the unlock was left as spin_unlock_irq().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Add few debug messages for some of the possible scenarios
where we can detect PAPRD failures. this will help us to be
sure that we had really enabled PAPRD

Cc: susinder@qca.qualcomm.com
Cc: senthilb@qca.qualcomm.com
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

It is always "y" for now, b43 will not compile without CONFIG_SSB yet.
This is just a first step of dropping SSB dependency.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

if_spi: Fix compilation warning - unused variable 'spi'

drivers/net/wireless/libertas/if_spi.c: In function ‘if_spi_init_card’:
drivers/net/wireless/libertas/if_spi.c:1035: warning: unused variable ‘spi’

The variable is used only in a macro which uses the args only for DEBUG builds.
Remove the 'spi' variable completely.
Signed-off-by: Nikanth Karthikesan <nikanth@google.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is totally broken plus we do not have specs for HT PHY yet. Just
introduce place for writing driver if we discover anything.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When suspending, __ieee80211_suspend() calls ieee80211_scan_cancel(),
which will only cancel sw scan. In order to cancel hw scan, the
low-level driver has to cancel it in the suspend() callback. however,
this is too late, as a new scan_work will be enqueued (while the driver
is going into suspend).

Add a new cancel_hw_scan() callback, asking the driver to cancel an
active hw scan, and call it in ieee80211_scan_cancel().
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

warning message
drivers/ssb/driver_chipcommon_pmu.c: In function ssb_pmu_resources_init
drivers/ssb/driver_chipcommon_pmu.c:420:15: warning: updown_tab_size may
be used uninitilized in this function.

updown_tab_size and depend_tab_size may not be set in the bus->chip_id
switch statement, so set to 0 by default to avoid using uninitialized
stack space.
Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Trigger connection monitor on resume from suspend.  Since we
have been sleeping, there is reason to suspect that we might
not still be associated.  The speed of detecting loss of
{connection,authentication} is worth the cost of the small
additional traffic at resume.
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Check EEPROM for multiple contexts support
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Make sure when we say 11n enable, we really support it.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Multiple places have similar code to construct calib header. Merge into
single inline function.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

No functional changes, just group similar defines together
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Temperature location in EEPROM is generic to all devices
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Remove both IWL_DEBUG_TXPOWER and IWL_DEBUG_NOTIF, not used.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Instead use generic IWL_DEBUG_INFO, use IWL_DEBUG_FW for uCode related stuffs.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Instead of IWL_DEBUG_POWER, IWL_DEBUG_TEMP should be used for temperature
related debug messages
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Adding dedicated debug message for coex related activities
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Replace IWL_DEBUG_AP with IWL_DEBUG_COEX for debug COEX related stuffs
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Instead of having the separated define, use the sku capabilities in EEPROM
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Add define for band capabilities in EEPROM
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

The ucode subtypes keep changing, and there's no
particular reason to be checking them (other than
a paranoid sanity check). Since the numbers are
also in conflict between different ucode images
now, simply don't check them any more and rely on
the images being built correctly.

Also, to indicate that, rename the constants and
the enum, moving it to a different file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Move no_sleep_autoadjust module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Move led_mode module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

Move bt_coex_active module parameter into iwlagn_mod_params structure
along with all the other iwlagn module parameters
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

For testmode trace function, huge amout of data need to pass to userspace.
Use the build-in nl80211 dumpt it function

Require nl80211 testmode dumpit support patch.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

For testmode trace function, allow userspace application to request the
size of trace buffer.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

In "Build regressions/improvements in v3.0-rc2", Geert Uytterhoeven
reports a number of warnings that occur for parisc builds of rtlwifi
and dependents.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

In the brcm80211 driver we disable the 80211 core when the driver is
'down'. The bcma_core_disable() function exactly does the same as
our implementation so exporting this function makes sense.

Cc: linux-wireless@vger.kernel.org
Cc: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Add some error handling if the allocation fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1) Avoid global adapter pointer usage
   a) in sdio.c by moving some code from mwifiex_cleanup_module() to
      mwifiex_sdio_remove().
   b) in main.c by passing an extra parameter to few functions.
2) Add new variable "user_rmmod" to identify if mwifiex_sdio_remove()
   callback function is called in card removal or rmmod context. These
   code changes are adapted from Libertas driver.
3) Remove unnecessary NULL pointer check for "func" pointer in
   mwifiex_sdio_remove().
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Use less indentions and remove uneeded irq-save flags.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Messages like that

iwl4965 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
iwl4965 0000:03:00.0: EVT_LOGT:1821445332:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821445332:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821445336:0x0000000c:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821445533:0x00000107:0106
iwl4965 0000:03:00.0: EVT_LOGT:1821445534:0x00000000:0302
iwl4965 0000:03:00.0: EVT_LOGT:1821445574:0x000000d4:0321
iwl4965 0000:03:00.0: EVT_LOGT:1821445575:0x00000000:1350
iwl4965 0000:03:00.0: EVT_LOGT:1821445576:0x00000000:1351
iwl4965 0000:03:00.0: EVT_LOGT:1821445576:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821445577:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821445581:0x0000000d:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821446327:0x00000107:0106
iwl4965 0000:03:00.0: EVT_LOGT:1821446328:0x00000000:0302
iwl4965 0000:03:00.0: EVT_LOGT:1821446368:0x000000d4:0321
iwl4965 0000:03:00.0: EVT_LOGT:1821446369:0x00000000:1350
iwl4965 0000:03:00.0: EVT_LOGT:1821446370:0x00000000:1351
iwl4965 0000:03:00.0: EVT_LOGT:1821446370:0x00000000:1352
iwl4965 0000:03:00.0: EVT_LOGT:1821446371:0x00000001:1353
iwl4965 0000:03:00.0: EVT_LOGT:1821446375:0x0000000e:0357
iwl4965 0000:03:00.0: EVT_LOGT:1821446383:0x00000000:0125

are completely useless for me. Remove bunch of code that generate them.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We do not reset radio anymore, hence don't need that code too.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Recover from statistics code was added during 6xxx devices development,
I don't think is needed on old devices. Also it is suspicious to cause
random, unreproducible microcode errors and hangs. So remove it.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

At http://dev.laptop.org/ticket/10748 we are seeing a case of the
libertas firmware randomly stopping responding to commands after
resume. Careful monitoring of communications indicates a firmware or
hardware bug, which has been reported to Marvell.

Work around this issue by adding a reset_card method; this is
automatically called when command timeouts are detected and provides an
instant recovery to this situation.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>