1. 13 Jun, 2016 7 commits
    • Paul Gortmaker's avatar
      pinctrl: at91-pio4: make it explicitly non-modular · f703851a
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      drivers/pinctrl/Kconfig:config PINCTRL_AT91PIO4
      drivers/pinctrl/Kconfig:        bool "AT91 PIO4 pinctrl driver"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      We explicitly disallow a driver unbind, since that doesn't have a
      sensible use case anyway, and it allows us to drop the ".remove"
      code for non-modular drivers.
      
      Since module_platform_driver() uses the same init level priority as
      builtin_platform_driver() the init ordering remains unchanged with
      this commit.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Acked-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      f703851a
    • Paul Gortmaker's avatar
      pinctrl: digicolor: make it explicitly non-modular · 546c6d79
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      drivers/pinctrl/Kconfig:config PINCTRL_DIGICOLOR
      drivers/pinctrl/Kconfig:        bool
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      We explicitly disallow a driver unbind, since that doesn't have a
      sensible use case anyway, and it allows us to drop the ".remove"
      code for non-modular drivers.
      
      Since module_platform_driver() uses the same init level priority as
      builtin_platform_driver() the init ordering remains unchanged with
      this commit.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Acked-by: default avatarBaruch Siach <baruch@tkos.co.il>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      546c6d79
    • Paul Gortmaker's avatar
      pinctrl: zynq: make it explicitly non-modular · 4c3deee9
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      config PINCTRL_ZYNQ
              bool "Pinctrl driver for Xilinx Zynq"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      Since module_platform_driver() uses the same init level priority as
      builtin_platform_driver() the init ordering remains unchanged with
      this commit.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: Michal Simek <michal.simek@xilinx.com>
      Cc: Sören Brinkmann" <soren.brinkmann@xilinx.com>
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Acked-by: default avatarMichal Simek <michal.simek@xilinx.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      4c3deee9
    • Paul Gortmaker's avatar
      pinctrl: amd: make it explicitly non-modular · b8c2b10a
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      config PINCTRL_AMD
              bool "AMD GPIO pin control"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      We explicitly disallow a driver unbind, since that doesn't have a
      sensible use case anyway, and it allows us to drop the ".remove"
      code for non-modular drivers.
      
      Since module_platform_driver() uses the same init level priority as
      builtin_platform_driver() the init ordering remains unchanged with
      this commit.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: linux-gpio@vger.kernel.org
      Cc: Ken Xue <Ken.Xue@amd.com>
      Cc: Jeff Wu <Jeff.Wu@amd.com>
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      b8c2b10a
    • Paul Gortmaker's avatar
      pinctrl: lpc18xx: make it explicitly non-modular · 82359b0a
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      config PINCTRL_LPC18XX
              bool "NXP LPC18XX/43XX SCU pinctrl driver"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      We explicitly disallow a driver unbind, since that doesn't have a
      sensible use case anyway, and it allows us to drop the ".remove"
      code for non-modular drivers.
      
      Since module_platform_driver() uses the same init level priority as
      builtin_platform_driver() the init ordering remains unchanged with
      this commit.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: Joachim Eastwood <manabian@gmail.com>
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      82359b0a
    • Paul Gortmaker's avatar
      pinctrl: at91: make it explicitly non-modular · eaa864a1
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      drivers/pinctrl/Kconfig:config PINCTRL_AT91
      drivers/pinctrl/Kconfig:        bool "AT91 pinctrl driver"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      Since module_init was not being used in this driver, we don't need
      to be concerned with initcall ordering changes when removing it.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      eaa864a1
    • Paul Gortmaker's avatar
      pinctrl: baytrail: make it explicitly non-modular · 360943a8
      Paul Gortmaker authored
      The Kconfig currently controlling compilation of this code is:
      
      config PINCTRL_BAYTRAIL
              bool "Intel Baytrail GPIO pin control"
      
      ...meaning that it currently is not being built as a module by anyone.
      
      Lets remove the modular code that is essentially orphaned, so that
      when reading the driver there is no doubt it is builtin-only.
      
      We explicitly disallow a driver unbind, since that doesn't have a
      sensible use case anyway, and it allows us to drop the ".remove"
      code for non-modular drivers.
      
      Since module_init() was already not in use in this driver, we don't
      have any concerns with init ordering changes here.
      
      Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
      
      We also delete the MODULE_LICENSE tag etc. since all that information
      is already contained at the top of the file in the comments.
      
      Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
      Cc: linux-gpio@vger.kernel.org
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Acked-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      360943a8
  2. 08 Jun, 2016 4 commits
  3. 31 May, 2016 29 commits