- 15 Jan, 2015 40 commits
-
-
Jiri Slaby authored
commit fa0c5540 upstream. When resirefs is trying to mount a partition, it creates a commit workqueue (sbi->commit_wq). But when mount fails later, the workqueue is not freed. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by: auxsvr@gmail.com Reported-by:
Benoît Monin <benoit.monin@gmx.fr> Cc: Jan Kara <jack@suse.cz> Cc: reiserfs-devel@vger.kernel.org Fixes: 797d9016Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Emmanuel Grumbach authored
commit 70dcec5a upstream. This can happen and there is no point in added more detection code lower in the stack. Catching these in one single point (cfg80211) is enough. Stop WARNING about this case. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=89001 Fixes: 2f1c6c57 ("cfg80211: process non country IE conflicting first") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit f89f46cf upstream. If the userspace passes a malformed sched scan request (or a net detect wowlan configuration) by adding a NL80211_ATTR_SCHED_SCAN_MATCH attribute without any nested matchsets, a NULL pointer dereference will occur. Fix this by checking that we do have matchsets in our array before trying to access it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 IP: [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] PGD 865c067 PUD 865b067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [last unloaded: compat] CPU: 2 PID: 2442 Comm: iw Tainted: G O 3.17.2 #31 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880013800790 ti: ffff880008d80000 task.ti: ffff880008d80000 RIP: 0010:[<ffffffffa002fd69>] [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] RSP: 0018:ffff880008d838d0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000143c RSI: 0000000000000000 RDI: ffff880008ee8dd0 RBP: ffff880008d83948 R08: 0000000000000002 R09: 0000000000000019 R10: ffff88001d1b3c40 R11: 0000000000000002 R12: ffff880019e85e00 R13: 00000000fffffed4 R14: ffff880009757800 R15: 0000000000001388 FS: 00007fa3b6d13700(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 0000000008670000 CR4: 00000000000006e0 Stack: ffff880009757800 ffff880000000001 0000000000000000 ffff880008ee84e0 0000000000000000 ffff880009757800 00000000fffffed4 ffff880008d83948 ffffffff814689c9 ffff880009757800 ffff880008ee8000 0000000000000000 Call Trace: [<ffffffff814689c9>] ? nla_parse+0xb9/0x120 [<ffffffffa00306de>] nl80211_set_wowlan+0x75e/0x960 [cfg80211] [<ffffffff810bf3d5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8161a77b>] genl_family_rcv_msg+0x18b/0x360 [<ffffffff810bf66d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8161a9d4>] genl_rcv_msg+0x84/0xc0 [<ffffffff8161a950>] ? genl_family_rcv_msg+0x360/0x360 [<ffffffff81618e79>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81619458>] genl_rcv+0x28/0x40 [<ffffffff816184a5>] netlink_unicast+0x105/0x180 [<ffffffff8161886f>] netlink_sendmsg+0x34f/0x7a0 [<ffffffff8105a097>] ? kvm_clock_read+0x27/0x40 [<ffffffff815c644d>] sock_sendmsg+0x8d/0xc0 [<ffffffff811a75c9>] ? might_fault+0xb9/0xc0 [<ffffffff811a756e>] ? might_fault+0x5e/0xc0 [<ffffffff815d5d26>] ? verify_iovec+0x56/0xe0 [<ffffffff815c73e0>] ___sys_sendmsg+0x3d0/0x3e0 [<ffffffff810a7be8>] ? sched_clock_cpu+0x98/0xd0 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff810bb39f>] ? up_read+0x1f/0x40 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff812146ed>] ? __fget_light+0x13d/0x160 [<ffffffff815c7b02>] __sys_sendmsg+0x42/0x80 [<ffffffff815c7b52>] SyS_sendmsg+0x12/0x20 [<ffffffff81751f69>] system_call_fastpath+0x16/0x1b Fixes: ea73cbce ("nl80211: fix scheduled scan RSSI matchset attribute confusion") Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Arik Nemtsov authored
commit 34f05f54 upstream. In the already-set and intersect case of a driver-hint, the previous wiphy regdomain was not freed before being reset with a copy of the cfg80211 regdomain. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Jouni Malinen authored
commit 08f6f147 upstream. The VHT supported channel width field is a two bit integer, not a bitfield. cfg80211_chandef_usable() was interpreting it incorrectly and ended up rejecting 160 MHz channel width if the driver indicated support for both 160 and 80+80 MHz channels. Fixes: 3d9d1d66 ("nl80211/cfg80211: support VHT channel configuration") (however, no real drivers had 160 MHz support it until 3.16) Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Andreas Müller authored
commit d025933e upstream. As multicast-frames can't be fragmented, "dot11MulticastReceivedFrameCount" stopped being incremented after the use-after-free fix. Furthermore, the RX-LED will be triggered by every multicast frame (which wouldn't happen before) which wouldn't allow the LED to rest at all. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=89431 which also had the patch. Fixes: b8fff407 ("mac80211: fix use-after-free in defragmentation") Signed-off-by:
Andreas Müller <goo@stapelspeicher.org> [rewrite commit message] Signed-off-by:
-
Gwendal Grignou authored
commit d1c7e29e upstream. Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE, 64 bytes. While processing the IRQ, we were asking to receive up to wMaxInputLength bytes, which can be bigger than 64 bytes. Later, when ->start is run, a proper bufsize will be calculated. Given wMaxInputLength is said to be unreliable in other part of the code, set to receive only what we can even if it results in truncated reports. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Eric W. Biederman authored
commit db86da7c upstream. A security fix in caused the way the unprivileged remount tests were using user namespaces to break. Tweak the way user namespaces are being used so the test works again. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 66d2f338 upstream. Now that setgroups can be disabled and not reenabled, setting gid_map without privielge can now be enabled when setgroups is disabled. This restores most of the functionality that was lost when unprivileged setting of gid_map was removed. Applications that use this functionality will need to check to see if they use setgroups or init_groups, and if they don't they can be fixed by simply disabling setgroups before writing to gid_map. Reviewed-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Eric W. Biederman authored
commit 9cc46516 upstream. - Expose the knob to user space through a proc file /proc/<pid>/setgroups A value of "deny" means the setgroups system call is disabled in the current processes user namespace and can not be enabled in the future in this user namespace. A value of "allow" means the segtoups system call is enabled. - Descendant user namespaces inherit the value of setgroups from their parents. - A proc file is used (instead of a sysctl) as sysctls currently do not allow checking the permissions at open time. - Writing to the proc file is restricted to before the gid_map for the user namespace is set. This ensures that disabling setgroups at a user namespace level will never remove the ability to call setgroups from a process that already has that ability. A process may opt in to the setgroups disable for itself by creating, entering and configuring a user namespace or by calling setns on an existing user namespace with setgroups disabled. Processes without privileges already can not call setgroups so this is a noop. Prodcess with privilege become processes without privilege when entering a user namespace and as with any other path to dropping privilege they would not have the ability to call setgroups. So this remains within the bounds of what is possible without a knob to disable setgroups permanently in a user namespace. Signed-off-by:
-
Tony Lindgren authored
commit 027bc8b0 upstream. On some ARMs the memory can be mapped pgprot_noncached() and still be working for atomic operations. As pointed out by Colin Cross <ccross@android.com>, in some cases you do want to use pgprot_noncached() if the SoC supports it to see a debug printk just before a write hanging the system. On ARMs, the atomic operations on strongly ordered memory are implementation defined. So let's provide an optional kernel parameter for configuring pgprot_noncached(), and use pgprot_writecombine() by default. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Rob Herring authored
commit 7ae9cb81 upstream. Currently trying to use pstore on at least ARMs can hang as we're mapping the peristent RAM with pgprot_noncached(). On ARMs, pgprot_noncached() will actually make the memory strongly ordered, and as the atomic operations pstore uses are implementation defined for strongly ordered memory, they may not work. So basically atomic operations have undefined behavior on ARM for device or strongly ordered memory types. Let's fix the issue by using write-combine variants for mappings. This corresponds to normal, non-cacheable memory on ARM. For many other architectures, this change does not change the mapping type as by default we have: #define pgprot_writecombine pgprot_noncached The reason why pgprot_noncached() was originaly used for pstore is because Colin Cross <ccross@android.com> had observed lost debug prints right before a device hanging write operation on some systems. For the platforms supporting pgprot_noncached(), we can add a an optional configuration option to support that. But let's get pstore working first before adding new features. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: linux-kernel@vger.kernel.org Acked-by:
Rob Herring <rob.herring@calxeda.com> [tony@atomide.com: updated description] Signed-off-by:
-
Jesse Barnes authored
commit 9f49c376 upstream. Should probably just init this in the GMbus code all the time, based on the cdclk and HPLL like we do on newer platforms. Ville has code for that in a rework branch, but until then we can fix this bug fairly easily. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76301Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Nikolay <mar.kolya@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Nadav Amit authored
commit ab646f54 upstream. commit d50eaa18 ("KVM: x86: Perform limit checks when assigning EIP") mistakenly used zero as cpl on em_ret_far. Use the actual one. Fixes: d50eaa18Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bandan Das authored
commit 78051e3b upstream. If L0 has disabled EPT, don't advertise unrestricted mode at all since it depends on EPT to run real mode code. Fixes: 92fbc7b1Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit f647d7c1 upstream. Otherwise, if buggy user code points DS or ES into the TLS array, they would be corrupted after a context switch. This also significantly improves the comments and documents some gotchas in the code. Before this patch, the both tests below failed. With this patch, the es test passes, although the gsbase test still fails. ----- begin es test ----- /* * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned short GDT3(int idx) { return (idx << 3) | 3; } static int create_tls(int idx, unsigned int base) { struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; if (syscall(SYS_set_thread_area, &desc) != 0) err(1, "set_thread_area"); return desc.entry_number; } int main() { int idx = create_tls(-1, 0); printf("Allocated GDT index %d\n", idx); unsigned short orig_es; asm volatile ("mov %%es,%0" : "=rm" (orig_es)); int errors = 0; int total = 1000; for (int i = 0; i < total; i++) { asm volatile ("mov %0,%%es" : : "rm" (GDT3(idx))); usleep(100); unsigned short es; asm volatile ("mov %%es,%0" : "=rm" (es)); asm volatile ("mov %0,%%es" : : "rm" (orig_es)); if (es != GDT3(idx)) { if (errors == 0) printf("[FAIL]\tES changed from 0x%hx to 0x%hx\n", GDT3(idx), es); errors++; } } if (errors) { printf("[FAIL]\tES was corrupted %d/%d times\n", errors, total); return 1; } else { printf("[OK]\tES was preserved\n"); return 0; } } ----- end es test ----- ----- begin gsbase test ----- /* * gsbase.c, a gsbase test * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned char *testptr, *testptr2; static unsigned char read_gs_testvals(void) { unsigned char ret; asm volatile ("movb %%gs:%1, %0" : "=r" (ret) : "m" (*testptr)); return ret; } int main() { int errors = 0; testptr = mmap((void *)0x200000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr == MAP_FAILED) err(1, "mmap"); testptr2 = mmap((void *)0x300000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr2 == MAP_FAILED) err(1, "mmap"); *testptr = 0; *testptr2 = 1; if (syscall(SYS_arch_prctl, ARCH_SET_GS, (unsigned long)testptr2 - (unsigned long)testptr) != 0) err(1, "ARCH_SET_GS"); usleep(100); if (read_gs_testvals() == 1) { printf("[OK]\tARCH_SET_GS worked\n"); } else { printf("[FAIL]\tARCH_SET_GS failed\n"); errors++; } asm volatile ("mov %0,%%gs" : : "r" (0)); if (read_gs_testvals() == 0) { printf("[OK]\tWriting 0 to gs worked\n"); } else { printf("[FAIL]\tWriting 0 to gs failed\n"); errors++; } usleep(100); if (read_gs_testvals() == 0) { printf("[OK]\tgsbase is still zero\n"); } else { printf("[FAIL]\tgsbase was corrupted\n"); errors++; } return errors == 0 ? 0 : 1; } ----- end gsbase test ----- Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
commit 24c037eb upstream. alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it fails because disable_pid_allocation() was called by the exiting child_reaper. We could simply move get_pid_ns() down to successful return, but this fix tries to be as trivial as possible. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johan Hovold authored
commit 7ecd9a3f upstream. The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Felipe Balbi <balbi@ti.com> Tested-by:
-
Johan Hovold authored
commit 44c63a57 upstream. This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by:
-
Guo Zeng authored
commit 0e953255 upstream. Move rtc register to be later than hardware initialization. The reason is that devm_rtc_device_register() will do read_time() which is a callback accessing hardware. This sometimes causes a hang in the hardware related callback. Signed-off-by:
Guo Zeng <guo.zeng@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jan Kara authored
commit a682e9c2 upstream. If some error happens in NCP_IOC_SETROOT ioctl, the appropriate error return value is then (in most cases) just overwritten before we return. This can result in reporting success to userspace although error happened. This bug was introduced by commit 2e54eb96 ("BKL: Remove BKL from ncpfs"). Propagate the errors correctly. Coverity id: 1226925. Fixes: 2e54eb96 ("BKL: Remove BKL from ncpfs") Signed-off-by:
-
Takashi Iwai authored
commit 06a41a99 upstream. When a CPU is hotplugged, the current blk-mq spews a warning like: kobject '(null)' (ffffe8ffffc8b5d8): tried to add an uninitialized object, something is seriously wrong. CPU: 1 PID: 1386 Comm: systemd-udevd Not tainted 3.18.0-rc7-2.g088d59b-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_171129-lamiak 04/01/2014 0000000000000000 0000000000000002 ffffffff81605f07 ffffe8ffffc8b5d8 ffffffff8132c7a0 ffff88023341d370 0000000000000020 ffff8800bb05bd58 ffff8800bb05bd08 000000000000a0a0 000000003f441940 0000000000000007 Call Trace: [<ffffffff81005306>] dump_trace+0x86/0x330 [<ffffffff81005644>] show_stack_log_lvl+0x94/0x170 [<ffffffff81006d21>] show_stack+0x21/0x50 [<ffffffff81605f07>] dump_stack+0x41/0x51 [<ffffffff8132c7a0>] kobject_add+0xa0/0xb0 [<ffffffff8130aee1>] blk_mq_register_hctx+0x91/0xb0 [<ffffffff8130b82e>] blk_mq_sysfs_register+0x3e/0x60 [<ffffffff81309298>] blk_mq_queue_reinit_notify+0xf8/0x190 [<ffffffff8107cfdc>] notifier_call_chain+0x4c/0x70 [<ffffffff8105fd23>] cpu_notify+0x23/0x50 [<ffffffff81060037>] _cpu_up+0x157/0x170 [<ffffffff810600d9>] cpu_up+0x89/0xb0 [<ffffffff815fa5b5>] cpu_subsys_online+0x35/0x80 [<ffffffff814323cd>] device_online+0x5d/0xa0 [<ffffffff81432485>] online_store+0x75/0x80 [<ffffffff81236a5a>] kernfs_fop_write+0xda/0x150 [<ffffffff811c5532>] vfs_write+0xb2/0x1f0 [<ffffffff811c5f42>] SyS_write+0x42/0xb0 [<ffffffff8160c4ed>] system_call_fastpath+0x16/0x1b [<00007f0132fb24e0>] 0x7f0132fb24e0 This is indeed because of an uninitialized kobject for blk_mq_ctx. The blk_mq_ctx kobjects are initialized in blk_mq_sysfs_init(), but it goes loop over hctx_for_each_ctx(), i.e. it initializes only for online CPUs. Thus, when a CPU is hotplugged, the ctx for the newly onlined CPU is registered without initialization. This patch fixes the issue by initializing the all ctx kobjects belonging to each queue. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=908794Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Takashi Iwai authored
commit f62f5eff upstream. The same fixup to enable EAPD is needed for ASUS Z99He with AD1986A codec like another ASUS machine. Reported-and-tested-by:
Dmitry V. Zimin <pfzim@mail.ru> Signed-off-by:
-
Andy Lutomirski authored
commit 29fa6825 upstream. paravirt_enabled has the following effects: - Disables the F00F bug workaround warning. There is no F00F bug workaround any more because Linux's standard IDT handling already works around the F00F bug, but the warning still exists. This is only cosmetic, and, in any event, there is no such thing as KVM on a CPU with the F00F bug. - Disables 32-bit APM BIOS detection. On a KVM paravirt system, there should be no APM BIOS anyway. - Disables tboot. I think that the tboot code should check the CPUID hypervisor bit directly if it matters. - paravirt_enabled disables espfix32. espfix32 should *not* be disabled under KVM paravirt. The last point is the purpose of this patch. It fixes a leak of the high 16 bits of the kernel stack address on 32-bit KVM paravirt guests. Fixes CVE-2014-8134. Suggested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Daniel Vetter authored
commit 0b6d24c0 upstream. Apparently stuff works that way on those machines. I agree with Chris' concern that this is a bit risky but imo worth a shot in -next just for fun. Afaics all these machines have the pci resources allocated like that by the BIOS, so I suspect that it's all ok. This regression goes back to commit eaba1b8f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jul 4 12:28:35 2013 +0100 drm/i915: Verify that our stolen memory doesn't conflict Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76983 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71031Tested-by:
lu hua <huax.lu@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Eric W. Biederman authored
commit f0d62aec upstream. Generalize id_map_mutex so it can be used for more state of a user namespace. Reviewed-by:
-
Eric W. Biederman authored
commit f95d7918 upstream. If you did not create the user namespace and are allowed to write to uid_map or gid_map you should already have the necessary privilege in the parent user namespace to establish any mapping you want so this will not affect userspace in practice. Limiting unprivileged uid mapping establishment to the creator of the user namespace makes it easier to verify all credentials obtained with the uid mapping can be obtained without the uid mapping without privilege. Limiting unprivileged gid mapping establishment (which is temporarily absent) to the creator of the user namespace also ensures that the combination of uid and gid can already be obtained without privilege. This is part of the fix for CVE-2014-8989. Reviewed-by:
-
Eric W. Biederman authored
commit 80dd00a2 upstream. setresuid allows the euid to be set to any of uid, euid, suid, and fsuid. Therefor it is safe to allow an unprivileged user to map their euid and use CAP_SETUID privileged with exactly that uid, as no new credentials can be obtained. I can not find a combination of existing system calls that allows setting uid, euid, suid, and fsuid from the fsuid making the previous use of fsuid for allowing unprivileged mappings a bug. This is part of a fix for CVE-2014-8989. Reviewed-by:
-
Eric W. Biederman authored
commit be7c6dba upstream. As any gid mapping will allow and must allow for backwards compatibility dropping groups don't allow any gid mappings to be established without CAP_SETGID in the parent user namespace. For a small class of applications this change breaks userspace and removes useful functionality. This small class of applications includes tools/testing/selftests/mount/unprivilged-remount-test.c Most of the removed functionality will be added back with the addition of a one way knob to disable setgroups. Once setgroups is disabled setting the gid_map becomes as safe as setting the uid_map. For more common applications that set the uid_map and the gid_map with privilege this change will have no affect. This is part of a fix for CVE-2014-8989. Reviewed-by:
-
Eric W. Biederman authored
commit 273d2c67 upstream. setgroups is unique in not needing a valid mapping before it can be called, in the case of setgroups(0, NULL) which drops all supplemental groups. The design of the user namespace assumes that CAP_SETGID can not actually be used until a gid mapping is established. Therefore add a helper function to see if the user namespace gid mapping has been established and call that function in the setgroups permission check. This is part of the fix for CVE-2014-8989, being able to drop groups without privilege using user namespaces. Reviewed-by:
-
Benjamin Coddington authored
commit bf7491f1 upstream. Fix a bug where nfsd4_encode_components_esc() incorrectly calculates the length of server array in fs_location4--note that it is a count of the number of array elements, not a length in bytes. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 082d4bd7 (nfsd4: "backfill" using write_bytes_to_xdr_buf) Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Benjamin Coddington authored
commit 5a64e569 upstream. Fix a bug where nfsd4_encode_components_esc() includes the esc_end char as an additional string encoding. Signed-off-by:
-
Rasmus Villemoes authored
commit ef17af2a upstream. Bugs similar to the one in acbbe6fb (kcmp: fix standard comparison bug) are in rich supply. In this variant, the problem is that struct xdr_netobj::len has type unsigned int, so the expression o1->len - o2->len _also_ has type unsigned int; it has completely well-defined semantics, and the result is some non-negative integer, which is always representable in a long long. But this means that if the conditional triggers, we are guaranteed to return a positive value from compare_blob. In this case it could be fixed by - res = o1->len - o2->len; + res = (long long)o1->len - (long long)o2->len; but I'd rather eliminate the usually broken 'return a - b;' idiom. Reviewed-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Bart Van Assche authored
commit c38d185d upstream. What we need is the following two guarantees: * Any thread that observes the effect of the test_and_set_bit() by __bt_get_word() also observes the preceding addition of 'current' to the appropriate wait list. This is guaranteed by the semantics of the spin_unlock() operation performed by prepare_and_wait(). Hence the conversion of test_and_set_bit_lock() into test_and_set_bit(). * The wait lists are examined by bt_clear() after the tag bit has been cleared. clear_bit_unlock() guarantees that any thread that observes that the bit has been cleared also observes the store operations preceding clear_bit_unlock(). However, clear_bit_unlock() does not prevent that the wait lists are examined before that the tag bit is cleared. Hence the addition of a memory barrier between clear_bit() and the wait list examination. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robert Elliott <elliott@hp.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Alexander Gordeev <agordeev@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 9e98e9d7 upstream. If __bt_get_word() is called with last_tag != 0, if the first find_next_zero_bit() fails, if after wrap-around the test_and_set_bit() call fails and find_next_zero_bit() succeeds, if the next test_and_set_bit() call fails and subsequently find_next_zero_bit() does not find a zero bit, then another wrap-around will occur. Avoid this by introducing an additional local variable. Signed-off-by:
-
Bart Van Assche authored
commit 45a9c9d9 upstream. blk-mq users are allowed to free the memory request_queue.tag_set points at after blk_cleanup_queue() has finished but before blk_release_queue() has started. This can happen e.g. in the SCSI core. The SCSI core namely embeds the tag_set structure in a SCSI host structure. The SCSI host structure is freed by scsi_host_dev_release(). This function is called after blk_cleanup_queue() finished but can be called before blk_release_queue(). This means that it is not safe to access request_queue.tag_set from inside blk_release_queue(). Hence remove the blk_sync_queue() call from blk_release_queue(). This call is not necessary - outstanding requests must have finished before blk_release_queue() is called. Additionally, move the blk_mq_free_queue() call from blk_release_queue() to blk_cleanup_queue() to avoid that struct request_queue.tag_set gets accessed after it has been freed. This patch avoids that the following kernel oops can be triggered when deleting a SCSI host for which scsi-mq was enabled: Call Trace: [<ffffffff8109a7c4>] lock_acquire+0xc4/0x270 [<ffffffff814ce111>] mutex_lock_nested+0x61/0x380 [<ffffffff812575f0>] blk_mq_free_queue+0x30/0x180 [<ffffffff8124d654>] blk_release_queue+0x84/0xd0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff81245895>] blk_put_queue+0x15/0x20 [<ffffffff8125c409>] disk_release+0x99/0xd0 [<ffffffff8133d056>] device_release+0x36/0xb0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff8125a78a>] put_disk+0x1a/0x20 [<ffffffff811d4cb5>] __blkdev_put+0x135/0x1b0 [<ffffffff811d56a0>] blkdev_put+0x50/0x160 [<ffffffff81199eb4>] kill_block_super+0x44/0x70 [<ffffffff8119a2a4>] deactivate_locked_super+0x44/0x60 [<ffffffff8119a87e>] deactivate_super+0x4e/0x70 [<ffffffff811b9833>] cleanup_mnt+0x43/0x90 [<ffffffff811b98d2>] __cleanup_mnt+0x12/0x20 [<ffffffff8107252c>] task_work_run+0xac/0xe0 [<ffffffff81002c01>] do_notify_resume+0x61/0xa0 [<ffffffff814d2c58>] int_signal+0x12/0x17 Signed-off-by:
-
Max Filippov authored
commit ff009ab6 upstream. Replace PAGE_KERNEL with PAGE_KERNEL_EXEC to allow copy_to_user_page invalidate icache for pages mapped with kmap. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Dave Airlie authored
commit e2809c7d upstream. On MST systems the monitors don't appear when we set the fb up, but plymouth opens the drm device and holds it open while they come up, when plymouth finishes and lastclose gets called we don't do the delayed fb probe, so the monitor never appears on the console. Fix this by moving the delayed checking into the mode restore. v2: Daniel suggested that ->delayed_hotplug is set under the mode_config mutex, so we should check it under that as well, while we are in the area. Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 19a93f04 upstream. At least on two MST devices I've tested with, when they are link training downstream, they are totally unable to handle aux ch msgs, so they defer like nuts. I tried 16, it wasn't enough, 32 seems better. This fixes one Dell 4k monitor and one of the MST hubs. v1.1: fixup comment (Tom). Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Doug Anderson authored
commit 8e2596e8 upstream. In (6468276b i2c: designware: make SCL and SDA falling time configurable) new device tree properties were added for setting the falling time of SDA and SCL. The device tree bindings doc had a typo in it: it forgot the "-ns" suffix for both properies in the prose of the bindings. I assume this is a typo because: * The source code includes the "-ns" * The example in the bindings includes the "-ns". Fix the typo. Signed-off-by:
Doug Anderson <dianders@chromium.org> Fixes: 6468276b ("i2c: designware: make SCL and SDA falling time configurable") Acked-by:
Romain Baeriswyl <romain.baeriswyl@alitech.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
