1. 24 Jul, 2013 1 commit
  2. 23 Jul, 2013 1 commit
  3. 22 Jul, 2013 2 commits
    • Jiri Slaby's avatar
      net: pch_gbe depends on x86 · f0e61604
      Jiri Slaby authored
      Since 4bb16672 (build some drivers only
      when compile-testing), PTP_1588_CLOCK_PCH depends on (X86 ||
      COMPILE_TEST). But PCH_GBE selects PTP_1588_CLOCK_PCH without
      depending on x86. Fix this by adding the same dependency here.
      Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      Reported-by: <fengguang.wu@intel.com> [intel's build test robot]
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: netdev@vger.kernel.org
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: kbuild-all@01.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0e61604
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 7bd04bcf
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      The following patchset contains Netfilter fixes for your net tree,
      they are:
      
      * Fix potential NULL dereference in the socket match if revision 0
        is used, from Eric Dumazet.
      
      * Fix missing expectation NAT initialization that results in dumping
        the NAT part via ctnetlink, thus leading to problems in expectation
        synchronization through conntrackd, from myself.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7bd04bcf
  4. 21 Jul, 2013 2 commits
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · f5f7ab67
      David S. Miller authored
      John W. Linville says:
      
      ====================
      Please accept this batch of fixes intended for the 3.11 tree...
      
      Alexey Khoroshilov fixes a suspend-related race in ath9k_htc.
      
      Arnd Bergmann corrects the alignment of a structure in the ssb code
      to be compatible with ARM devices.
      
      Bob Copeland provides an ath5k fix that corrects a mistaken variable
      initialization.
      
      Felix Fietkau corrects some frame accounting for dropped frames
      in ath9k.
      
      Geert Uytterhoeven brings a Kconfig fix to indicate the DMA
      requirements for rt2x00.
      
      Larry Finger offers two rtlwifi fixes: one that properly initializes
      a callback; and, a scattered collection of Kconfig, Makefile, and
      EXPORT_SYMBOL changes that correct some build problems.
      
      Finally, Sujith Manoharan provides an ath9k fix to disable a feature
      on a specific hardware device.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f5f7ab67
    • David S. Miller's avatar
      Merge branch 'fixes-for-3.11' of git://gitorious.org/linux-can/linux-can · 8d716c7a
      David S. Miller authored
      Marc Kleine-Budde says:
      
      ====================
      here are two fixes for the v3.11 release cycle:
      
      Maximilian Schneider contributes a patch for the esd_usb2 CAN driver. It adds
      sanity checking to the data coming from the USB CAN adapter before using it.
      Alexey Khoroshilov from the Linux Driver Verification project fixes an urb leak
      in the error handling of the USB 8dev's usb_8dev_start() function.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d716c7a
  5. 20 Jul, 2013 15 commits
  6. 19 Jul, 2013 6 commits
    • John W. Linville's avatar
      Merge branch 'master' of... · 876fbb5d
      John W. Linville authored
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
      876fbb5d
    • Alexey Khoroshilov's avatar
      can: usb_8dev: fix urb leak on failure path in usb_8dev_start() · 76719868
      Alexey Khoroshilov authored
      If usb_8dev_start() fails to submit urb,
      it unanchors the urb but forgets to free it.
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: default avatarAlexey Khoroshilov <khoroshilov@ispras.ru>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      76719868
    • Maximilian Schneider's avatar
      net: can: esd_usb2: check index of array before accessing · 233a26e8
      Maximilian Schneider authored
      The esd_usb2_read_bulk_callback() function is parsing the data that comes from
      the USB CAN adapter. One datum is used as an index to access the dev->nets[]
      array. This patch adds the missing bounds checking.
      Acked-by: default avatarMatthias Fuchs <matthias.fuchs@esd.eu>
      Signed-off-by: default avatarMaximilian Schneider <max@schneidersoft.net>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      233a26e8
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · ecb2cf1a
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "A couple interesting SKB fragment handling fixes, plus the usual small
        bits here and there:
      
         1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from
            Tim Gardner.
      
         2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC
            address printing helper.
      
         3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the
            device can't do checksumming offloads then it shouldn't say it can
            do SG either.  From Haiyang Zhang.
      
         4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens.
      
         5) Don't leak DMA mappings on mapping failures, from Neil Horman.
      
         6) We need to reset the transport header of SKBs in ipv4 before we
            attempt to perform early socket demux, just like ipv6 does.  From
            Eric Dumazet.
      
         7) Add missing locking on vxlan device removal, from Stephen
            Hemminger.
      
         8) xen-netfront has to make two passes over an SKB to prepare it for
            transfer.  One pass calculates the number of slots needed, the
            second massages the SKB and fills the slots.  Unfortunately, the
            first pass doesn't calculate the number of slots properly so we
            can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't
            work out so well.  Fix from Jan Beulich with help and discussion
            with several others.
      
         9) Fix a similar problem in tun and macvtap, which have to split up
            scatter-gather elements at PAGE_SIZE boundaries.  Don't do
            zerocopy if it would result in a > MAX_SKB_FRAGS skb.  Fixes from
            Jason Wang.
      
        10) On receive, once we've decoded the VLAN state completely, clear
            skb->vlan_tci.  Otherwise demuxed tunnels underneath can trigger
            the VLAN code again, corrupting the packet.  Fix from Eric
            Dumazet"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        vlan: fix a race in egress prio management
        vlan: mask vlan prio bits
        macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
        tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
        pkt_sched: sch_qfq: remove a source of high packet delay/jitter
        xen-netfront: pull on receive skb may need to happen earlier
        vxlan: add necessary locking on device removal
        hyperv: Fix the NETIF_F_SG flag setting in netvsc
        net: Fix sysfs_format_mac() code duplication.
        be2net: Fix to avoid hardware workaround when not needed
        macvtap: do not assume 802.1Q when send vlan packets
        macvtap: fix the missing ret value of TUNSETQUEUE
        ipv4: set transport header earlier
        mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
        bgmac: add dependency to phylib
        net/irda: fixed style issues in irlan_eth
        ethtool: fixed trailing statements in ethtool
        ndisc: bool initializations should use true and false
        atl1e: unmap partially mapped skb on dma error and free skb
      ecb2cf1a
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · ee114b97
      Linus Torvalds authored
      Pull x86 fixes from Peter Anvin:
       "Trying again to get the fixes queue, including the fixed IDT alignment
        patch.
      
        The UEFI patch is by far the biggest issue at hand: it is currently
        causing quite a few machines to boot.  Which is sad, because the only
        reason they would is because their BIOSes touch memory that has
        already been freed.  The other major issue is that we finally have
        tracked down the root cause of a significant number of machines
        failing to suspend/resume"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86: Make sure IDT is page aligned
        x86, suspend: Handle CPUs which fail to #GP on RDMSR
        x86/platform/ce4100: Add header file for reboot type
        Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
        efivars: check for EFI_RUNTIME_SERVICES
      ee114b97
    • Linus Torvalds's avatar
      Merge tag 'md-3.11-fixes' of git://neil.brown.name/md · 4b8b8a4a
      Linus Torvalds authored
      Pull md bug fixes from NeilBrown:
       "Sorry boss, back at work now boss.  Here's them nice shiny patches ya
        wanted.  All nicely tagged and justified for -stable and everyfing:
      
        Three bug fixes for md in 3.10
      
        3.10 wasn't a good release for md.  The bio changes left a couple of
        bugs, and an md "fix" created another one.
      
        These three patches appear to fix the issues and have been tagged for
        -stable"
      
      * tag 'md-3.11-fixes' of git://neil.brown.name/md:
        md/raid1: fix bio handling problems in process_checks()
        md: Remove recent change which allows devices to skip recovery.
        md/raid10: fix two problems with RAID10 resync.
      4b8b8a4a
  7. 18 Jul, 2013 13 commits
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 0a693ab6
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "You'll be terribly disappointed in this, I'm not trying to sneak any
        features in or anything, its mostly radeon and intel fixes, a couple
        of ARM driver fixes"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
        drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
        drm/radeon/dpm/atom: fix broken gcc harder
        drm/radeon/dpm/atom: restructure logic to work around a compiler bug
        drm/radeon/dpm: fix atom vram table parsing
        drm/radeon: fix an endian bug in atom table parsing
        drm/radeon: add a module parameter to disable aspm
        drm/rcar-du: Use the GEM PRIME helpers
        drm/shmobile: Use the GEM PRIME helpers
        uvesafb: Really allow mtrr being 0, as documented and warn()ed
        radeon kms: do not flush uninitialized hotplug work
        drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
        drm/radeon: align VM PTBs (Page Table Blocks) to 32K
        drm/radeon: allow selection of alignment in the sub-allocator
        drm/radeon: never unpin UVD bo v3
        drm/radeon: fix UVD fence emit
        drm/radeon: add fault decode function for CIK
        drm/radeon: add fault decode function for SI (v2)
        drm/radeon: add fault decode function for cayman/TN (v2)
        drm/radeon: use radeon device for request firmware
        drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
        ...
      0a693ab6
    • Sujith Manoharan's avatar
      ath9k_hw: Fix multicast search for AR9002 family · 64b6f46f
      Sujith Manoharan authored
      The multicast search bit is disabled for the AR9003
      family, but this is required for AR9002 too. Fix this in
      the INI override routine.
      Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      64b6f46f
    • Larry Finger's avatar
      rtlwifi: Fix build errors for unusual cases · 6f334c2b
      Larry Finger authored
      The present build configuration for the rtlwifi family of drivers will
      fail under two known conditions:
      
      (1) If rtlwifi is selected without selecting any of the dependent drivers,
          there are errors in the build.
      (2) If the PCI drivers are built into the kernel and the USB drivers are modules,
          or vice versa, there are missing globals.
      
      The first condition is fixed by never building rtlwifi unless at least one
      of the device drivers is selected. The second failure is fixed by splitting
      the PCI and USB codes out of rtlwifi, and creating their own mini drivers.
      If the drivers that use them are modules, they will also be modules.
      
      Although a number of files are touched by this patch, only Makefile and Kconfig
      have undergone significant changes. The only modifications to the other files
      were to export entry points needed by the new rtl_pci and rtl_usb units, or to
      rename two variables that had names that were likely to cause namespace collisions.
      
      Reported-by: Fengguang Wu <fengguang.wu@intel.com>  [Condition 1]
      Reported-by: Ben Hutchings <bhutchings@solarflare.com> [Condition 2]
      Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Cc: Ben Hutchings <bhutchings@solarflare.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      6f334c2b
    • Bob Copeland's avatar
      ath5k: fix extra set bit in multicast mask · f287cbd0
      Bob Copeland authored
      Bit 32 was always set which looks to have been accidental,
      according to git history.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      f287cbd0
    • Geert Uytterhoeven's avatar
      rt2x00: RT2X00 should depend on HAS_DMA · 6a084839
      Geert Uytterhoeven authored
      If NO_DMA=y:
      
      drivers/built-in.o: In function `rt2x00queue_unmap_skb':
      drivers/net/wireless/rt2x00/rt2x00queue.c:129: undefined reference to `dma_unmap_single'
      drivers/net/wireless/rt2x00/rt2x00queue.c:133: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `rt2x00queue_map_txskb':
      drivers/net/wireless/rt2x00/rt2x00queue.c:112: undefined reference to `dma_map_single'
      drivers/net/wireless/rt2x00/rt2x00queue.c:115: undefined reference to `dma_mapping_error'
      drivers/built-in.o: In function `rt2x00queue_alloc_rxskb':
      drivers/net/wireless/rt2x00/rt2x00queue.c:93: undefined reference to `dma_map_single'
      drivers/net/wireless/rt2x00/rt2x00queue.c:95: undefined reference to `dma_mapping_error'
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Cc: linux-wireless@vger.kernel.org
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      6a084839
    • Arnd Bergmann's avatar
      ssb: fix alignment of struct bcma_device_id · b01a60be
      Arnd Bergmann authored
      The ARM OABI and EABI disagree on the alignment of structures
      with small members, so module init tools may interpret the
      ssb device table incorrectly, as shown  by this warning when
      building the b43 device driver in an OABI kernel:
      
      FATAL: drivers/net/wireless/b43/b43: sizeof(struct ssb_device_id)=6 is
      not a modulo of the size of section __mod_ssb_device_table=88.
      
      Forcing the default (EABI) alignment on the structure makes this
      problem go away. Since the ssb_device_id may have the same problem,
      better fix both structures.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: John W. Linville <linville@tuxdriver.com>
      Cc: Michael Buesch <mb@bu3sch.de>
      Cc: Larry Finger <Larry.Finger@lwfinger.net>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      b01a60be
    • Eric Dumazet's avatar
      vlan: fix a race in egress prio management · 3e3aac49
      Eric Dumazet authored
      egress_priority_map[] hash table updates are protected by rtnl,
      and we never remove elements until device is dismantled.
      
      We have to make sure that before inserting an new element in hash table,
      all its fields are committed to memory or else another cpu could
      find corrupt values and crash.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Patrick McHardy <kaber@trash.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e3aac49
    • Eric Dumazet's avatar
      vlan: mask vlan prio bits · d4b812de
      Eric Dumazet authored
      In commit 48cc32d3
      ("vlan: don't deliver frames for unknown vlans to protocols")
      Florian made sure we set pkt_type to PACKET_OTHERHOST
      if the vlan id is set and we could find a vlan device for this
      particular id.
      
      But we also have a problem if prio bits are set.
      
      Steinar reported an issue on a router receiving IPv6 frames with a
      vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
      because skb->vlan_tci is set.
      
      Forwarded frame is completely corrupted : We can see (8100:4000)
      being inserted in the middle of IPv6 source address :
      
      16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 >
      9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64
             0x0000:  0000 0029 8000 c7c3 7103 0001 a0ae e651
             0x0010:  0000 0000 ccce 0b00 0000 0000 1011 1213
             0x0020:  1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
             0x0030:  2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
      
      It seems we are not really ready to properly cope with this right now.
      
      We can probably do better in future kernels :
      vlan_get_ingress_priority() should be a netdev property instead of
      a per vlan_dev one.
      
      For stable kernels, lets clear vlan_tci to fix the bugs.
      Reported-by: default avatarSteinar H. Gunderson <sesse@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4b812de
    • Jason Wang's avatar
      macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS · ece793fc
      Jason Wang authored
      We try to linearize part of the skb when the number of iov is greater than
      MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
      one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
      network.
      
      Solve this problem by calculate the pages needed for iov before trying to do
      zerocopy and switch to use copy instead of zerocopy if it needs more than
      MAX_SKB_FRAGS.
      
      This is done through introducing a new helper to count the pages for iov, and
      call uarg->callback() manually when switching from zerocopy to copy to notify
      vhost.
      
      We can do further optimization on top.
      
      This bug were introduced from b92946e2
      (macvtap: zerocopy: validate vectors before building skb).
      
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ece793fc
    • Jason Wang's avatar
      tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS · 88529176
      Jason Wang authored
      We try to linearize part of the skb when the number of iov is greater than
      MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
      one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
      network.
      
      Solve this problem by calculate the pages needed for iov before trying to do
      zerocopy and switch to use copy instead of zerocopy if it needs more than
      MAX_SKB_FRAGS.
      
      This is done through introducing a new helper to count the pages for iov, and
      call uarg->callback() manually when switching from zerocopy to copy to notify
      vhost.
      
      We can do further optimization on top.
      
      The bug were introduced from commit 0690899b
      (tun: experimental zero copy tx support)
      
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      88529176
    • Paolo Valente's avatar
      pkt_sched: sch_qfq: remove a source of high packet delay/jitter · 87f40dd6
      Paolo Valente authored
      QFQ+ inherits from QFQ a design choice that may cause a high packet
      delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a
      special quantity, the system virtual time, to track the service
      provided by the ideal system it approximates. When a packet is
      dequeued, this quantity must be incremented by the size of the packet,
      divided by the sum of the weights of the aggregates waiting to be
      served. Tracking this sum correctly is a non-trivial task, because, to
      preserve tight service guarantees, the decrement of this sum must be
      delayed in a special way [1]: this sum can be decremented only after
      that its value would decrease also in the ideal system approximated by
      QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous'
      weight sum, increased and decreased immediately as the weight of an
      aggregate changes, and as an aggregate is created or destroyed (which,
      in its turn, happens as a consequence of some class being
      created/destroyed/changed). However, to avoid the problems caused to
      service guarantees by these immediate decreases, QFQ+ increments the
      system virtual time using the maximum value allowed for the weight
      sum, 2^10, in place of the dynamic, instantaneous value. The
      instantaneous value of the weight sum is used only to check whether a
      request of weight increase or a class creation can be satisfied.
      
      Unfortunately, the problems caused by this choice are worse than the
      temporary degradation of the service guarantees that may occur, when a
      class is changed or destroyed, if the instantaneous value of the
      weight sum was used to update the system virtual time. In fact, the
      fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is
      equal to the ratio between the weight of the aggregate and the sum of
      the weights of the competing aggregates. The packet delay guaranteed
      to the aggregate is instead inversely proportional to the guaranteed
      bandwidth. By using the maximum possible value, and not the actual
      value of the weight sum, QFQ+ provides each aggregate with the worst
      possible service guarantees, and not with service guarantees related
      to the actual set of competing aggregates. To see the consequences of
      this fact, consider the following simple example.
      
      Suppose that only the following aggregates are backlogged, i.e., that
      only the classes in the following aggregates have packets to transmit:
      one aggregate with weight 10, say A, and ten aggregates with weight 1,
      say B1, B2, ..., B10. In particular, suppose that these aggregates are
      always backlogged. Given the weight distribution, the smoothest and
      fairest service order would be:
      A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ...
      
      QFQ+ would provide exactly this optimal service if it used the actual
      value for the weight sum instead of the maximum possible value, i.e.,
      11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it
      serves aggregates as follows (easy to prove and to reproduce
      experimentally):
      A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ...
      
      By replacing 10 with N in the above example, and by increasing N, one
      can increase at will the maximum packet delay and the jitter
      experienced by the classes in aggregate A.
      
      This patch addresses this issue by just using the above
      'instantaneous' value of the weight sum, instead of the maximum
      possible value, when updating the system virtual time.  After the
      instantaneous weight sum is decreased, QFQ+ may deviate from the ideal
      service for a time interval in the order of the time to serve one
      maximum-size packet for each backlogged class. The worst-case extent
      of the deviation exhibited by QFQ+ during this time interval [1] is
      basically the same as of the deviation described above (but, without
      this patch, QFQ+ suffers from such a deviation all the time). Finally,
      this patch modifies the comment to the function qfq_slot_insert, to
      make it coherent with the fact that the weight sum used by QFQ+ can
      now be lower than the maximum possible value.
      
      [1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix",
      Proceedings of AAA-IDEA'05, June 2005.
      Signed-off-by: default avatarPaolo Valente <paolo.valente@unimore.it>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      87f40dd6
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.11-rc2' of... · 7a62711a
      Linus Torvalds authored
      Merge tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
      
      Pull driver core patches from Greg KH:
       "Here are some driver core patches for 3.11-rc2.  They aren't really
        bugfixes, but a bunch of new helper macros for drivers to properly
        create attribute groups, which drivers and subsystems need to fix up a
        ton of race issues with incorrectly creating sysfs files (binary and
        normal) after userspace has been told that the device is present.
      
        Also here is the ability to create binary files as attribute groups,
        to solve that race condition, which was impossible to do before this,
        so that's my fault the drivers were broken.
      
        The majority of the .c changes is indenting and moving code around a
        bit.  It affects no existing code, but allows the large backlog of 70+
        patches that I already have created to start flowing into the
        different subtrees, instead of having to live in my driver-core tree,
        causing merge nightmares in linux-next for the next few months.
      
        These were finalized too late for the -rc1 merge window, which is why
        they were didn't make that pull request, testing and review from
        others didn't happen until a few weeks ago, and then there's the whole
        distraction of the past few days, which prevented these from getting
        to you sooner, sorry about that.
      
        Oh, and there's a bugfix for the documentation build warning in here
        as well.  All of these have been in linux-next this week, with no
        reported problems"
      
      * tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        driver-core: fix new kernel-doc warning in base/platform.c
        sysfs: use file mode defines from stat.h
        sysfs: add more helper macro's for (bin_)attribute(_groups)
        driver core: add default groups to struct class
        driver core: Introduce device_create_groups
        sysfs: prevent warning when only using binary attributes
        sysfs: add support for binary attributes in groups
        driver core: device.h: add RW and RO attribute macros
        sysfs.h: add BIN_ATTR macro
        sysfs.h: add ATTRIBUTE_GROUPS() macro
        sysfs.h: add __ATTR_RW() macro
      7a62711a
    • Linus Torvalds's avatar
      Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging · 5d88d15e
      Linus Torvalds authored
      Pull hwmon fix from Guenter Roeck:
       "Single patch to staticize a local variable"
      
      * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        hwmon: (abx500) Staticize abx500_temp_attributes
      5d88d15e