- 17 Jun, 2012 6 commits
-
-
Johannes Berg authored
commit 463454b5 upstream. If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Reported-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit 71ecfa18 upstream. When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Reported-by:
Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by:
-
Mathias Krause authored
commit 7c8d5184 upstream. The 32 bit variant of cbc(aes) decrypt is using instructions requiring 128 bit aligned memory locations but fails to ensure this constraint in the code. Fix this by loading the data into intermediate registers with load unaligned instructions. This fixes reported general protection faults related to aesni. References: https://bugzilla.kernel.org/show_bug.cgi?id=43223Reported-by:
Daniel <garkein@mailueberfall.de> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Steffen Rumler authored
commit 3c752965 upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by:
Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Roland Dreier authored
commit cbf8ae32 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by:
Roland Dreier <roland@purestorage.com> Acked-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eugeni Dodonov authored
commit 67384fe3 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 09 Jun, 2012 34 commits
-
-
Greg Kroah-Hartman authored
-
Tao Ma authored
commit b22b1f17 upstream. Commit 79906964 uses the ext4_{set,clear}_inode_flags() functions to change the i_flags automatically but fails to remove the error setting of i_flags. So we still have the problem of trashing state flags. Fix this by removing the assignment. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Grazvydas Ignotas authored
commit f380f2c4 upstream. This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Andy Whitcroft authored
commit c5971456 upstream. We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92 (ACPI / Battery: Update information on info notification and resume) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Tested-by:
Ralf Jung <post@ralfj.de> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Alex Deucher authored
commit a2bef8ce upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Salman Qazi authored
commit 95599968 upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
-
Salman Qazi authored
commit 02b78310 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by:
-
Theodore Ts'o authored
commit 79906964 upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by:
-
Theodore Ts'o authored
commit f3fc0210 upstream. The ext4_error() function is missing a call to save_error_info(). Since this is the function which marks the file system as containing an error, this oversight (which was introduced in 2.6.36) is quite significant, and should be backported to older stable kernels with high urgency. Reported-by:
Ken Sumrall <ksumrall@google.com> Signed-off-by:
-
Eric Sandeen authored
commit 7e84b621 upstream. If ext4_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: # mkfs.ext4 -r 4 /dev/sdb6 # mount /dev/sdb6 /mnt/test # dmesg | grep "too high" [164919.759248] EXT4-fs (sdb6): revision level too high, forcing read-only mode # grep sdb6 /proc/mounts /dev/sdb6 /mnt/test2 ext4 rw,seclabel,relatime,data=ordered 0 0 Reviewed-by:
Andreas Dilger <adilger@whamcloud.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 91657eaf ] Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 617c8c11 ] At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit e0268868 ] dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 59b9997b ] This reverts commit 8a83a00b. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d4b11335 ] commit c57b5468 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c57b5468 ] commit 7d3d43da (net: In unregister_netdevice_notifier unregister the netdevices.) makes pktgen crashing at module unload. [ 296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267 [ 296.820719] lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1 [ 296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254 [ 296.821079] Call Trace: [ 296.821211] [<ffffffff8168a715>] spin_dump+0x8a/0x8f [ 296.821345] [<ffffffff8168a73b>] spin_bug+0x21/0x26 [ 296.821507] [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140 [ 296.821648] [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20 [ 296.821786] [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen] [ 296.821928] [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen] [ 296.822073] [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100 [ 296.822216] [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen] [ 296.822357] [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0 [ 296.822502] [<ffffffff81699652>] system_call_fastpath+0x16/0x1b Hold the pktgen_thread_lock while splicing pktgen_threads, and test pktgen_exiting in pktgen_device_event() to make unload faster. Signed-off-by:
-
James Chapman authored
[ Upstream commit c51ce497 ] An application may call connect() to disconnect a socket using an address with family AF_UNSPEC. The L2TP IP sockets were not handling this case when the socket is not bound and an attempt to connect() using AF_UNSPEC in such cases would result in an oops. This patch addresses the problem by protecting the sk_prot->disconnect() call against trying to unhash the socket before it is bound. The patch also adds more checks that the sockaddr supplied to bind() and connect() calls is valid. RIP: 0010:[<ffffffff82e133b0>] [<ffffffff82e133b0>] inet_unhash+0x50/0xd0 RSP: 0018:ffff88001989be28 EFLAGS: 00010293 Stack: ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249 ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000 0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639 Call Trace: [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80 [<ffffffff82d012fc>] sys_connect+0x9c/0x100 Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 0c183379 ] Since commit ad0081e4 "ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed" the fragment of packets is incorrect. because tunnel mode needs IPsec headers and trailer for all fragments, while on transport mode it is sufficient to add the headers to the first fragment and the trailer to the last. so modify mtu and maxfraglen base on ipsec mode and if fragment is first or last. with my test,it work well(every fragment's size is the mtu) and does not trigger slow fragment path. Changes from v1: though optimization, mtu_prev and maxfraglen_prev can be delete. replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL. add fuction ip6_append_data_mtu to make codes clearer. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Yanmin Zhang authored
[ Upstream commit e49cc0da ] We hit a kernel OOPS. <3>[23898.789643] BUG: sleeping function called from invalid context at /data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103 <3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name: Thread-6683 <4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G W 3.0.8-137685-ge7742f9 #1 <4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.904225] Call Trace: <4>[23899.989209] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.000416] [<c1238c2a>] __might_sleep+0x10a/0x110 <4>[23900.007357] [<c1228021>] do_page_fault+0xd1/0x3c0 <4>[23900.013764] [<c18e9ba9>] ? restore_all+0xf/0xf <4>[23900.024024] [<c17c007b>] ? napi_complete+0x8b/0x690 <4>[23900.029297] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.123739] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.128955] [<c18ea0c3>] error_code+0x5f/0x64 <4>[23900.133466] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.138450] [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0 <4>[23900.144312] [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0 <4>[23900.150730] [<c17f63df>] ip_route_output_flow+0x1f/0x60 <4>[23900.156261] [<c181de58>] ip4_datagram_connect+0x188/0x2b0 <4>[23900.161960] [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30 <4>[23900.167834] [<c18298d6>] inet_dgram_connect+0x36/0x80 <4>[23900.173224] [<c14f9e88>] ? _copy_from_user+0x48/0x140 <4>[23900.178817] [<c17ab9da>] sys_connect+0x9a/0xd0 <4>[23900.183538] [<c132e93c>] ? alloc_file+0xdc/0x240 <4>[23900.189111] [<c123925d>] ? sub_preempt_count+0x3d/0x50 Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing fi. Other cpu might be accessing fi. Fixing it by delaying the releasing. With the patch, we ran MTBF testing on Android mobile for 12 hours and didn't trigger the issue. Thank Eric for very detailed review/checking the issue. Signed-off-by:
Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by:
Kun Jiang <kunx.jiang@intel.com> Acked-by:
-
David S. Miller authored
[ Upstream commit dccd9ecc ] Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by:
Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by:
-
Thomas Hellstrom authored
commit a8ff3ee2 upstream. This imbalance may cause hangs when TTM is trying to swap out a buffer that is already on the delayed delete list. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Jerome Glisse authored
commit 95c4b23e upstream. Without this bit sets we get broken rendering and lockups. fglrx sets this bit. Bugs that should be fixed by this patch : https://bugs.freedesktop.org/show_bug.cgi?id=49792 https://bugzilla.kernel.org/show_bug.cgi?id=43207 https://bugs.freedesktop.org/show_bug.cgi?id=39282Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Acked-by:
-
Alex Deucher authored
commit 0b8c30bc upstream. Need to program an additional VM register. This doesn't not currently cause any problems, but allows us to program the proper backend map in a subsequent patch which should improve performance on these asics. Signed-off-by:
-
Dmitry Maluka authored
commit 34a5704d upstream. It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Al Viro authored
commit 63d37a84 upstream. __mnt_make_shortterm() in there undoes the effect of __mnt_make_longterm() we'd done back when we set ->mnt_ns non-NULL; it should not be done to vfsmounts that had never gone through commit_tree() and friends. Kudos to lczerner for catching that one... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Clemens Ladisch authored
commit 5cd5d7c4 upstream. The array of sample rates is reallocated every time when opening the PCM device, but was freed only once when unplugging the device. Reported-by:
"Alexander E. Patrakov" <patrakov@gmail.com> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Michael Gruetzner authored
commit 85d59726 upstream. Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to the blacklist of btusb module and add it to the ath3k module to properly load the firmware in Kernel 3.3.4 The device is integrated in e.g. some Acer Aspire 7750G. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e03c Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Michael Gruetzner <mgruetzn@gmx.de> Signed-off-by:
Gustavo Padovan <gustavo@padovan.org> Signed-off-by:
-
Steven Harms authored
commit 98514036 upstream. This change adds 0x0489:0xe033 to the btusb module. This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e033 Rev= 2.29 S: Manufacturer=Broadcom Corp S: Product=Acer Module S: SerialNumber=60D819F74101 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Steven Harms <sjharms@gmail.com> Signed-off-by:
-
Don Zickus authored
commit 2e8b5063 upstream. I was trying to backport the following commit to RHEL-6 From 0cea73465cd22373c5cd43a3edd25fbd4bb532ef Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oliver@neukum.org> Date: Wed, 21 Sep 2011 11:37:15 +0200 Subject: [PATCH] btusb: add device entry for Broadcom SoftSailing and noticed it wasn't working on an HP Elitebook. Looking into the patch I noticed a very subtle typo in the ids. The patch has '0x05ac' instead of '0x0a5c'. A snippet of the lsusb -v output also shows this: Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 1 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0a5c Broadcom Corp. idProduct 0x21e1 bcdDevice 1.12 iManufacturer 1 Broadcom Corp iProduct 2 BCM20702A0 iSerial 3 60D819F0338C bNumConfigurations 1 Looking at other Broadcom ids, the fix matches them whereas the original patch matches Apple's ids. Tested on an HP Elitebook 8760w. The btusb binds and the userspace stuff loads correctly. Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
Don Zickus <dzickus@redhat.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Manoj Iyer authored
commit 79cd7602 upstream. T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e042 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DCA61B5 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by:
Dennis Chua <dennis.chua@canonical.com> Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by:
-
João Paulo Rechi Vita authored
commit 6dfc326f upstream. One more vendor-specific ID for BCM20702A0. T: Bus=01 Lev=03 Prnt=05 Port=02 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e8 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=00027221F4E2 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
João Paulo Rechi Vita <jprvita@openbossa.org> Acked-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
James M. Leddy authored
commit 0a4eaeeb upstream. Add another vendor specific ID for BCM20702A0. This has been tested and works on hardware with this device. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AFB227B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
James M. Leddy <james.leddy@canonical.com> Acked-by:
-
Manoj Iyer authored
commit 37305cf6 upstream. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=74DE2B344A7B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
-
Jesse Sung authored
commit c0190925 upstream. Add another vendor specific ID for BCM20702A0. output of usb-devices: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=9439E5CBF66C C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by:
-
