Skip to content

L
linux
Switch branch/tag
  1. 13 May, 2020 30 commits
  3. 12 May, 2020 10 commits
    • William Tu's avatar
      erspan: Check IFLA_GRE_ERSPAN_VER is set. · 51fa960d
      William Tu authored 
      Add a check to make sure the IFLA_GRE_ERSPAN_VER is provided by users.

Fixes: f989d546 ("erspan: Add type I version 0 support.")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: default avatarWilliam Tu <u9012063@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51fa960d
    • David S. Miller's avatar
      Merge branch 'Traffic-support-for-dsa_8021q-in-vlan_filtering-1-mode' · 113cb8ff
      David S. Miller authored 
      Vladimir Oltean says:

====================
Traffic support for dsa_8021q in vlan_filtering=1 mode

This series is an attempt to support as much as possible in terms of
traffic I/O from the network stack with the only dsa_8021q user thus
far, sja1105.

The hardware doesn't support pushing a second VLAN tag to packets that
are already tagged, so our only option is to combine the dsa_8021q with
the user tag into a single tag and decode that on the CPU.

The assumption is that there is a type of use cases for which 7 VLANs
per port are more than sufficient, and that there's another type of use
cases where the full 4096 entries are barely enough. Those use cases are
very different from one another, so I prefer trying to give both the
best experience by creating this best_effort_vlan_filtering knob to
select the mode in which they want to operate in.

v2 was submitted here:
https://patchwork.ozlabs.org/project/netdev/cover/20200511135338.20263-1-olteanv@gmail.com/

v1 was submitted here:
https://patchwork.ozlabs.org/project/netdev/cover/20200510164255.19322-1-olteanv@gmail.com/

Changes in v3:
Patch 01/15:
- Rename again to configure_vlan_while_not_filtering, and add a helper
  function for skipping VLAN configuration.
Patch 03/15:
- Remove sja1105_can_use_vlan_as_tags from driver code.
Patch 06/15:
- Adapt sja1105 driver to the second variable name change.
Patch 08/15:
- Provide an implementation of sja1105_can_use_vlan_as_tags as part of
  the tagger and not as part of the switch driver. So we have to look at
  the skb only, and not at the VLAN awareness state.

Changes in v2:
Patch 01/15:
- Rename variable from vlan_bridge_vtu to configure_vlans_while_disabled.
Patch 03/15:
- Be much more thorough, and make sure that things like virtual links
  and FDB operations still work properly.
Patch 05/15:
- Free the vlan lists on teardown.
- Simplify sja1105_classify_vlan: only look at priv->expect_dsa_8021q.
- Keep vid 1 in the list of dsa_8021q VLANs, to make sure that untagged
  packets transmitted from the stack, like PTP, continue to work in
  VLAN-unaware mode.
Patch 06/15:
- Adapt to vlan_bridge_vtu variable name change.
Patch 11/15:
- In sja1105_best_effort_vlan_filtering_set, get the vlan_filtering
  value of each port instead of just one time for port 0. Normally this
  shouldn't matter, but it avoids issues when port 0 is disabled in
  device tree.
Patch 14/14:
- Only do anything in sja1105_build_subvlans and in
  sja1105_build_crosschip_subvlans when operating in
  SJA1105_VLAN_BEST_EFFORT state. This avoids installing VLAN retagging
  rules in unaware mode, which would cost us a penalty in terms of
  usable frame memory.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      113cb8ff
    • Vladimir Oltean's avatar
      docs: net: dsa: sja1105: document the best_effort_vlan_filtering option · a20bc43b
      Vladimir Oltean authored 
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a20bc43b
    • Vladimir Oltean's avatar
      net: dsa: sja1105: implement VLAN retagging for dsa_8021q sub-VLANs · 3f01c91a
      Vladimir Oltean authored 
      Expand the delta commit procedure for VLANs with additional logic for
treating bridge_vlans in the newly introduced operating mode,
SJA1105_VLAN_BEST_EFFORT.

For every bridge VLAN on every user port, a sub-VLAN index is calculated
and retagging rules are installed towards a dsa_8021q rx_vid that
encodes that sub-VLAN index. This way, the tagger can identify the
original VLANs.

Extra care is taken for VLANs to still work as intended in cross-chip
scenarios. Retagging may have unintended consequences for these because
a sub-VLAN encoding that works for the CPU does not make any sense for a
front-panel port.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f01c91a
    • Vladimir Oltean's avatar
      net: dsa: sja1105: implement a common frame memory partitioning function · aaa270c6
      Vladimir Oltean authored 
      There are 2 different features that require some reserved frame memory
space: VLAN retagging and virtual links. Create a central function that
modifies the static config and ensures frame memory is never
overcommitted.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aaa270c6
    • Vladimir Oltean's avatar
      net: dsa: sja1105: add packing ops for the Retagging Table · 88cac0fa
      Vladimir Oltean authored 
      The Retagging Table is an optional feature that allows the switch to
match frames against a {ingress port, egress port, vid} rule and change
their VLAN ID. The retagged frames are by default clones of the original
ones (since the hardware-foreseen use case was to mirror traffic for
debugging purposes and to tag it with a special VLAN for this purpose),
but we can force the original frames to be dropped by removing the
pre-retagging VLAN from the port membership list of the egress port.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      88cac0fa
    • Vladimir Oltean's avatar
      net: dsa: sja1105: add a new best_effort_vlan_filtering devlink parameter · 2cafa72e
      Vladimir Oltean authored 
      This devlink parameter enables the handling of DSA tags when enslaved to
a bridge with vlan_filtering=1. There are very good reasons to want
this, but there are also very good reasons for not enabling it by
default. So a devlink param named best_effort_vlan_filtering, currently
driver-specific and exported only by sja1105, is used to configure this.

In practice, this is perhaps the way that most users are going to use
the switch in. It assumes that no more than 7 VLANs are needed per port.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2cafa72e
    • Vladimir Oltean's avatar
      net: dsa: tag_sja1105: implement sub-VLAN decoding · 84eeb5d4
      Vladimir Oltean authored 
      Create a subvlan_map as part of each port's tagger private structure.
This keeps reverse mappings of bridge-to-dsa_8021q VLAN retagging rules.

Note that as of this patch, this piece of code is never engaged, due to
the fact that the driver hasn't installed any retagging rule, so we'll
always see packets with a subvlan code of 0 (untagged).
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84eeb5d4
    • Vladimir Oltean's avatar
      net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs · 3eaae1d0
      Vladimir Oltean authored 
      For switches that support VLAN retagging, such as sja1105, we extend
dsa_8021q by encoding a "sub-VLAN" into the remaining 3 free bits in the
dsa_8021q tag.

A sub-VLAN is nothing more than a number in the range 0-7, which serves
as an index into a per-port driver lookup table. The sub-VLAN value of
zero means that traffic is untagged (this is also backwards-compatible
with dsa_8021q without retagging).

The switch should be configured to retag VLAN-tagged traffic that gets
transmitted towards the CPU port (and towards the CPU only). Example:

bridge vlan add dev sw1p0 vid 100

The switch retags frames received on port 0, going to the CPU, and
having VID 100, to the VID of 1104 (0x0450). In dsa_8021q language:

 | 11  | 10  |  9  |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |  0  |
 +-----------+-----+-----------------+-----------+-----------------------+
 |    DIR    | SVL |    SWITCH_ID    |  SUBVLAN  |          PORT         |
 +-----------+-----+-----------------+-----------+-----------------------+

0x0450 means:
 - DIR = 0b01: this is an RX VLAN
 - SUBVLAN = 0b001: this is subvlan #1
 - SWITCH_ID = 0b001: this is switch 1 (see the name "sw1p0")
 - PORT = 0b0000: this is port 0 (see the name "sw1p0")

The driver also remembers the "1 -> 100" mapping. In the hotpath, if the
sub-VLAN from the tag encodes a non-untagged frame, this mapping is used
to create a VLAN hwaccel tag, with the value of 100.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3eaae1d0
    • Vladimir Oltean's avatar
      net: dsa: sja1105: prepare tagger for handling DSA tags and VLAN simultaneously · 38b5beea
      Vladimir Oltean authored 
      In VLAN-unaware mode, sja1105 uses VLAN tags with a custom TPID of
0xdadb. While in the yet-to-be introduced best_effort_vlan_filtering
mode, it needs to work with normal VLAN TPID values.

A complication arises when we must transmit a VLAN-tagged packet to the
switch when it's in VLAN-aware mode. We need to construct a packet with
2 VLAN tags, and the switch will use the outer header for routing and
pop it on egress. But sadly, here the 2 hardware generations don't
behave the same:

- E/T switches won't pop an ETH_P_8021AD tag on egress, it seems
  (packets will remain double-tagged).
- P/Q/R/S switches will drop a packet with 2 ETH_P_8021Q tags (it looks
  like it tries to prevent VLAN hopping).

But looks like the reverse is also true:

- E/T switches have no problem popping the outer tag from packets with
  2 ETH_P_8021Q tags.
- P/Q/R/S will have no problem popping a single tag even if that is
  ETH_P_8021AD.

So it is clear that if we want the hardware to work with dsa_8021q
tagging in VLAN-aware mode, we need to send different TPIDs depending on
revision. Keep that information in priv->info->qinq_tpid.

The per-port tagger structure will hold an xmit_tpid value that depends
not only upon the qinq_tpid, but also upon the VLAN awareness state
itself (in case we must transmit using 0xdadb).
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38b5beea
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7