- 11 Jul, 2022 14 commits
-
-
Ratheesh Kannoth authored
NPC exact match table can support more entries than RPM dmac filters. This requires field size of DMAC filter count and index to be increased. Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ratheesh Kannoth authored
If exact match table is supported, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by:
-
Ratheesh Kannoth authored
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by:
-
Ratheesh Kannoth authored
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by:
-
Ratheesh Kannoth authored
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by:
-
Ratheesh Kannoth authored
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by:
-
Ratheesh Kannoth authored
FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'test'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jilin Yuan authored
Delete the redundant word 'driver'. Signed-off-by:
-
sewookseo authored
If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sehee Lee <seheele@google.com> Signed-off-by:
Sewook Seo <sewookseo@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 09 Jul, 2022 22 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-07-09 We've added 94 non-merge commits during the last 19 day(s) which contain a total of 125 files changed, 5141 insertions(+), 6701 deletions(-). The main changes are: 1) Add new way for performing BTF type queries to BPF, from Daniel Müller. 2) Add inlining of calls to bpf_loop() helper when its function callback is statically known, from Eduard Zingerman. 3) Implement BPF TCP CC framework usability improvements, from Jörn-Thorben Hinz. 4) Add LSM flavor for attaching per-cgroup BPF programs to existing LSM hooks, from Stanislav Fomichev. 5) Remove all deprecated libbpf APIs in prep for 1.0 release, from Andrii Nakryiko. 6) Add benchmarks around local_storage to BPF selftests, from Dave Marchevsky. 7) AF_XDP sample removal (given move to libxdp) and various improvements around AF_XDP selftests, from Magnus Karlsson & Maciej Fijalkowski. 8) Add bpftool improvements for memcg probing and bash completion, from Quentin Monnet. 9) Add arm64 JIT support for BPF-2-BPF coupled with tail calls, from Jakub Sitnicki. 10) Sockmap optimizations around throughput of UDP transmissions which have been improved by 61%, from Cong Wang. 11) Rework perf's BPF prologue code to remove deprecated functions, from Jiri Olsa. 12) Fix sockmap teardown path to avoid sleepable sk_psock_stop, from John Fastabend. 13) Fix libbpf's cleanup around legacy kprobe/uprobe on error case, from Chuang Wang. 14) Fix libbpf's bpf_helpers.h to work with gcc for the case of its sec/pragma macro, from James Hilliard. 15) Fix libbpf's pt_regs macros for riscv to use a0 for RC register, from Yixun Lan. 16) Fix bpftool to show the name of type BPF_OBJ_LINK, from Yafang Shao. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (94 commits) selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n bpf: Correctly propagate errors up from bpf_core_composites_match libbpf: Disable SEC pragma macro on GCC bpf: Check attach_func_proto more carefully in check_return_code selftests/bpf: Add test involving restrict type qualifier bpftool: Add support for KIND_RESTRICT to gen min_core_btf command MAINTAINERS: Add entry for AF_XDP selftests files selftests, xsk: Rename AF_XDP testing app bpf, docs: Remove deprecated xsk libbpf APIs description selftests/bpf: Add benchmark for local_storage RCU Tasks Trace usage libbpf, riscv: Use a0 for RC register libbpf: Remove unnecessary usdt_rel_ip assignments selftests/bpf: Fix few more compiler warnings selftests/bpf: Fix bogus uninitialized variable warning bpftool: Remove zlib feature test from Makefile libbpf: Cleanup the legacy uprobe_event on failed add/attach_event() libbpf: Fix wrong variable used in perf_event_uprobe_open_legacy() libbpf: Cleanup the legacy kprobe_event on failed add/attach_event() selftests/bpf: Add type match test against kernel's task_struct selftests/bpf: Add nested type to type based tests ... ==================== Link: https://lore.kernel.org/r/20220708233145.32365-1-daniel@iogearbox.netSigned-off-by: -
Linus Walleij authored
If there is a MAC address specified in the device tree, then use it. This is already perfectly legal to specify in accordance with the generic ethernet-controller.yaml schema. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
If the firmware does not provide a MAC address to the driver, fall back to generating a random MAC address. Signed-off-by:
-
Eric Dumazet authored
We want to kfree(table) if @table has been kmalloced, ie for non initial network namespace. Fixes: 849d5aa3 ("af_unix: Do not call kmemdup() for init_net's sysctl table.") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Self test improvements and a header tweak Patch 1 moves a definition to a header so it can be used in a struct declaration. Patch 2 adjusts a time threshold for a selftest that runs much slower on debug kernels (and even more on slow CI infrastructure), to reduce spurious failures. Patches 3 & 4 improve userspace PM test coverage. Patches 5 & 6 clean up output from a test script and selftest helper tool. ==================== Signed-off-by: -
Geliang Tang authored
The usage header of pm_nl_ctl command doesn't match with the context. So this patch adds the missing userspace PM keywords 'ann', 'rem', 'csf', 'dsf', 'events' and 'listen' in it. Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Geliang Tang authored
There're some 'Terminated' messages in the output of userspace pm tests script after killing './pm_nl_ctl events' processes: Created network namespaces ns1, ns2 [OK] ./userspace_pm.sh: line 166: 13735 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1 ./userspace_pm.sh: line 172: 13737 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1 Established IPv4 MPTCP Connection ns2 => ns1 [OK] ./userspace_pm.sh: line 166: 13753 Terminated ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1 ./userspace_pm.sh: line 172: 13755 Terminated ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1 Established IPv6 MPTCP Connection ns2 => ns1 [OK] ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [OK] This patch adds a helper kill_wait(), in it using 'wait $pid 2>/dev/null' commands after 'kill $pid' to avoid printing out these Terminated messages. Use this helper instead of using 'kill $pid'. Reviewed-by:
-
Geliang Tang authored
This patch adds userspace pm subflow tests support for mptcp_join.sh script. Add userspace pm create subflow and destroy test cases in userspace_tests(). Reviewed-by:
-
Geliang Tang authored
This patch adds userspace pm tests support for mptcp_join.sh script. Add userspace pm add_addr and rm_addr test cases in userspace_tests(). Reviewed-by:
-
Paolo Abeni authored
The mentioned test measures the transfer run-time to verify that the user-space program is able to use the full aggregate B/W. Even on (virtual) link-speed-bound tests, debug kernel can slow down the transfer enough to cause sporadic test failures. Instead of unconditionally raising the maximum allowed run-time, tweak when the running kernel is a debug one, and use some simple/ rough heuristic to guess such scenarios. Note: this intentionally avoids looking for /boot/config-<version> as the latter file is not always available in our reference CI environments. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Co-developed-by:
-
Geliang Tang authored
Move macro MPTCPOPT_HMAC_LEN definition from net/mptcp/protocol.h to include/net/mptcp.h. Reviewed-by:
-
Yang Yingliang authored
bcm63xx_enetsw_driver and bcm63xx_enet_driver are only used in bcm63xx_enet.c now, change them to static. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220707135801.1483941-1-yangyingliang@huawei.comSigned-off-by:
-
Russell King (Oracle) authored
When we are operating in SGMII inband mode, it implies that there is a PHY connected, and the ethtool advertisement for autoneg applies to the PHY, not the SGMII link. When in 1000base-X mode, then this applies to the 802.3z link and needs to be applied to the PCS. Fix this. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.ukSigned-off-by:
-
Antoine Tenart authored
A description is missing for the net.core.high_order_alloc_disable option in admin-guide/sysctl/net.rst ; add it. The above sysctl option was introduced by commit ce27ec60 ("net: add high_order_alloc_disable sysctl/static key"). Thanks to Eric for running again the benchmark cited in the above commit, showing this knob is now mostly of historical importance. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
-
Justin Stitt authored
When building with Clang we encounter this warning: | net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short' | but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat] | _leave(" = %d [set %hx]", ret, y); y is a u32 but the format specifier is `%hx`. Going from unsigned int to short int results in a loss of data. This is surely not intended behavior. If it is intended, the warning should be suppressed through other means. This patch should get us closer to the goal of enabling the -Wformat flag for Clang builds. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:Justin Stitt <justinstitt@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tls: pad strparser, internal header, decrypt_ctx etc. A grab bag of non-functional refactoring to make the series which will let us decrypt into a fresh skb smaller. Patches in this series are not strictly required to get the decryption into a fresh skb going, they are more in the "things which had been annoying me for a while" category. ==================== Link: https://lore.kernel.org/r/20220708010314.1451462-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
tls_wait_data() sets the return code as an output parameter and always returns ctx->recv_pkt on success. Return the error code directly and let the caller read the skb from the context. Use positive return code to indicate ctx->recv_pkt is ready. While touching the definition of the function rename it. Signed-off-by: -
Jakub Kicinski authored
include/net/tls.h is getting a little long, and is probably hard for driver authors to navigate. Split out the internals into a header which will live under net/tls/. While at it move some static inlines with a single user into the source files, add a few tls_ prefixes and fix spelling of 'proccess'. Signed-off-by: -
Jakub Kicinski authored
Jump to the free() call, instead of having to remember to free the memory in multiple places. Signed-off-by: -
Jakub Kicinski authored
The max size of iv + aad + tail is 22B. That's smaller than a single sg entry (32B). Don't bother with the memory packing, just create a struct which holds the max size of those members. Signed-off-by: -
Jakub Kicinski authored
AAD size is either 5 or 13. Really no point complicating the code for the 8B of difference. This will also let us turn the chunked up buffer into a sane struct. Signed-off-by: -
Jakub Kicinski authored
sk_skb_cb lives within skb->cb[]. skb->cb[] straddles 2 cache lines, each containing 24B of data. The first cache line does not contain much interesting information for users of strparser, so pad things a little. Previously strp_msg->full_len would live in the first cache line and strp_msg->offset in the second. We need to reorder the 8 byte temp_reg with struct tls_msg to prevent a 4B hole which would push the struct over 48B. Signed-off-by:
-
- 08 Jul, 2022 4 commits
-
-
Maxim Mikityanskiy authored
When CONFIG_NF_CONNTRACK=m, struct bpf_ct_opts and enum member BPF_F_CURRENT_NETNS are not exposed. This commit allows building the xdp_synproxy selftest in such cases. Note that nf_conntrack must be loaded before running the test if it's compiled as a module. This commit also allows this selftest to be successfully compiled when CONFIG_NF_CONNTRACK is disabled. One unused local variable of type struct bpf_ct_opts is also removed. Fixes: fb5cd0ce ("selftests/bpf: Add selftests for raw syncookie helpers") Reported-by:
Yauheni Kaliuta <ykaliuta@redhat.com> Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220708130319.1016294-1-maximmi@nvidia.com
-
Daniel Müller authored
This change addresses a comment made earlier [0] about a missing return of an error when __bpf_core_types_match is invoked from bpf_core_composites_match, which could have let to us erroneously ignoring errors. Regarding the typedef name check pointed out in the same context, it is not actually an issue, because callers of the function perform a name check for the root type anyway. To make that more obvious, let's add comments to the function (similar to what we have for bpf_core_types_are_compat, which is called in pretty much the same context). [0]: https://lore.kernel.org/bpf/165708121449.4919.13204634393477172905.git-patchwork-notify@kernel.org/T/#m55141e8f8cfd2e8d97e65328fa04852870d01af6Suggested-by:
Daniel Müller <deso@posteo.net> Signed-off-by:
-
James Hilliard authored
It seems the gcc preprocessor breaks with pragmas when surrounding __attribute__. Disable these pragmas on GCC due to upstream bugs see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55578 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90400 Fixes errors like: error: expected identifier or '(' before '#pragma' 106 | SEC("cgroup/bind6") | ^~~ error: expected '=', ',', ';', 'asm' or '__attribute__' before '#pragma' 114 | char _license[] SEC("license") = "GPL"; | ^~~ Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Signed-off-by:
-
Stanislav Fomichev authored
Syzkaller reports the following crash: RIP: 0010:check_return_code kernel/bpf/verifier.c:10575 [inline] RIP: 0010:do_check kernel/bpf/verifier.c:12346 [inline] RIP: 0010:do_check_common+0xb3d2/0xd250 kernel/bpf/verifier.c:14610 With the following reproducer: bpf$PROG_LOAD_XDP(0x5, &(0x7f00000004c0)={0xd, 0x3, &(0x7f0000000000)=ANY=[@ANYBLOB="1800000000000019000000000000000095"], &(0x7f0000000300)='GPL\x00', 0x0, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, 0x2b, 0xffffffffffffffff, 0x8, 0x0, 0x0, 0x10, 0x0}, 0x80) Because we don't enforce expected_attach_type for XDP programs, we end up in hitting 'if (prog->expected_attach_type == BPF_LSM_CGROUP' part in check_return_code and follow up with testing `prog->aux->attach_func_proto->type`, but `prog->aux->attach_func_proto` is NULL. Add explicit prog_type check for the "Note, BPF_LSM_CGROUP that attach ..." condition. Also, don't skip return code check for LSM/STRUCT_OPS. The above actually brings an issue with existing selftest which tries to return EPERM from void inet_csk_clone. Fix the test (and move called_socket_clone to make sure it's not incremented in case of an error) and add a new one to explicitly verify this condition. Fixes: 69fd337a ("bpf: per-cgroup lsm flavor") Reported-by: syzbot+5cc0730bd4b4d2c5f152@syzkaller.appspotmail.com Signed-off-by:Stanislav Fomichev <sdf@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220708175000.2603078-1-sdf@google.com
-
