- 24 Mar, 2009 31 commits
-
-
Greg Kroah-Hartman authored
This lets userspace determine what the state of the RTS line is, which is what is needed to properly handle data flow for this device (it raises RTS when there is data to be sent from it.) Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
This patch allows data to be sent to the scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: -
Ajay Kumar Gupta authored
NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Remove some pointless messages from the FTDI serial driver; I found these filling up syslog on one system. Also remove a pointless "break" after a "return" in the same area. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Frank Seidel authored
According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the usb subsystem. Signed-off-by:
Frank Seidel <frank@f-seidel.de> Signed-off-by:
-
Oliver Neukum authored
This patch makes use of the generic method if a serial driver provides no implementation. This simplifies implementing suspend/resume support in serial drivers. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
This exports a symbol for usb_serial_generic_resume, so that modules can use it. Signed-off-by:
-
Oliver Neukum authored
This removes an unnecessary check for autoresume from the generic resume method. The check has been obsoleted by the now delayed increase of the usage counter which makes the error this check prevented impossible. This change allows drivers which only use the bulk read URB the use of the generic method even if they support autosuspend. Signed-off-by:
-
Oliver Neukum authored
USB: serial: introduce a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension This patch introduces a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension. That is necessary to let drivers know whether they should report an error back. Signed-off-by: -
Roel Kluin authored
With a postfix decrement count will reach -1 rather than 0, so the warning will not be issued. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
-
Oliver Neukum authored
this does the standard support for suspend/resume for the opticon driver. Signed-off-by:
-
Oliver Neukum authored
This patch implements suspend and resume methods for the option driver. With my hardware I can even suspend the system and keep up a connection for a short time. Signed-off-by:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Darius Augulis authored
Workaround of hw bug in IMX UDC. This bug causes wrong handling of CFG_CHG interrupt. Workaround is documented inline source code. Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
-
Darius Augulis authored
Fix ep0 interrupt handling in IMX UDC Gadget. Signed-off-by:
-
Darius Augulis authored
Fix code style errors in IMX UDC Gadget. Signed-off-by:
-
Darius Augulis authored
Fix small bugs and add some omptimization in IMX UDC Gadget. Signed-off-by:
-
Werner Cornelius authored
Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer <http://err.no/src/TEMPer.c> Signed-off-by:Werner Cornelius <Werner.Cornelius@cornelius-consult.de> Signed-off-by:
Boris Hajduk <boris@hajduk.org> Signed-off-by:
-
Huang Weiyi authored
Removed duplicated #include in drivers/usb/gadget/ci13xxx_udc.c Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Acked-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by:
-
Julia Lawall authored
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by:
-
Julia Lawall authored
The functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) are moved from include/linux/usb.h to include/linux/usb/ch9.h. include/linux/usb/ch9.h makes more sense for these functions because they only depend on constants that are defined in this file. Signed-off-by:
-
Robert Jarzmik authored
Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Robert Jarzmik authored
When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by:
-
Robert Jarzmik authored
On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by:
-
Robert Jarzmik authored
Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by:
-
Robert Jarzmik authored
Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by:
-
Pete Zaitcev authored
The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer <aric at sdgsystems.com>) Signed-off-by:
-
Alan Stern authored
Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by:
Melchior FRANZ <melchior.franz@gmail.com> Tested-by:
-
- 23 Mar, 2009 9 commits
-
-
Linus Torvalds authored
-
Kyle McMartin authored
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jody McIntyre authored
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by:
Jody McIntyre <scjody@sun.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
-
Miklos Szeredi authored
This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
-
Kumar Gala authored
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Anton Vorontsov authored
commit b1c4a9dd ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
