- 12 Jun, 2021 15 commits
-
-
Olof Johansson authored
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v5.14: - Fix interrupt cells, GPIO controller node names in accordance with new YAML schemas. - Add proper compatible strings for Broadcomm Wifi and BT. - Fix upp and add some mount matrices for accelerometers so e.g. UI:s work as they should. - Drop the DRDY pin assignment for a non-existing pin on a magnetometer. * tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Fix orientation of Janice accelerometer ARM: dts: href: Mount matrices for TVK R2 ARM: dts: ux500: Fix some compatible strings ARM: dts: ux500: Drop drdy pin assignment from magnetometer ARM: dts: ux500: Fix orientation of accelerometer ARM: dts: ux500: Rename gpio-controller node ARM: dts: ux500: Fix interrupt cells Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs changes for 5.14, please pull the following: - Zhen fixes the Broadcom stingray serial node unit names to fix a DT binding warning * tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: normalize the node name of the UART devices Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.14, please pull the following: - Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS files to resolve a number of DT binding check warnings pertaining to NAND, pinmux, clocks, SPI - Stefan provides a fix for an increase in the DWC2 controller's RX FIFO causing regressions on the Raspberry Pi 4B - Mateusz adds a BCM2711 specific VEC compatible string to allow keying off that variant properly - Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI re-organization work and finally adding the DTS file proper * tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 400 ARM: dts: Add Raspberry Pi 400 support ARM: dts: bcm283x: Fix up GPIO LED node names dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema ARM: dts: Move BCM2711 RPi specific into separate dtsi ARM: dts: bcm283x: Fix up MMC node names ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" ARM: dts: BCM5301X: Fixup SPI binding dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema ARM: dts: BCM5301X: Fix pinmux subnodes names ARM: dts: Hurricane 2: Fix NAND nodes names ARM: dts: BCM63xx: Fix NAND nodes names ARM: NSP: dts: fix NAND nodes names ARM: Cygnus: dts: fix NAND nodes names ARM: brcmstb: dts: fix NAND nodes names ARM: dts: BCM5301X: Fix NAND nodes names Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.14, round 1 Highlights: ----------- MCU part: - Fixes for Yaml verifications MPU part: - Configure qspi's mdma transfer to block for stm32mp151 - ST boards: - Fixes for yaml verifications - DH boards: - Fixes for yaml verifications - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence. - Odyssey boards: - fix Sd card detectection (gpio line updated) - fix eMMC VQMMC suuply (use vdd instead of v3v3) * tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: fix stpmic node for stm32mp1 boards ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply ARM: dts: stm32: add a new DCMI pins group on stm32mp15 ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 dt-bindings: net: document ptp_ref clk in dwmac ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings ARM: dts: stm32: fix RCC node name on stm32f429 MCU ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.14 1. Several cleanups and alignment with dtschema. This includes removal of unused properties and fixing LED brightness property. 2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for example from Suspend to RAM where the PMIC RTC's power is still supplied). 3. Disable unused/not implemented camera on GT-I9100. * tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Disable unused camera input for I9100 ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420 ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3 ARM: dts: exynos: enable PMIC wakeup from suspend on Midas ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412 ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4 ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3 ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100 ARM: dts: exynos: align Broadcom WiFi with dtschema Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.14 - IBM Rainier and Everest LED descriptions. These systems have a large number of LEDs attached via expanders. - Ampere Mt Jade updates, as OpenBMC bringup continues for this machine. - Updated 64MB flash layout for systems using OpenBMC on NOR root file systems. - Support for HS200 MMC on AST2600 EVB. This is only supported from A2, so a new device tree is added to support A0 and A1. - Update all command lines for early serial output. * tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: Add pcie cable card indicator leds ARM: dts: aspeed: everest: Add vrm and other indicator leds ARM: dts: aspeed: everest: Add dimm indicator leds ARM: dts: aspeed: everest: Add pcie slot indicator leds ARM: dts: aspeed: everest: Add nvme and fan indicator leds ARM: dts: aspeed: everest: Add system level indicator leds ARM: dts: aspeed-g5: Add SCU phandle to GFX node ARM: dts: aspeed: Everest: Add directly controlled LEDs ARM: dts: aspeed: Rainier 4U: Remove fan updates ARM: dts: aspeed: Everest: Fix cable card PCA chips ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout ARM: dts: aspeed: mtjade: switch to 64MB flash layout ARM: dts: aspeed: mtjade: Add PSU support ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI ARM: dts: aspeed: Set earlycon boot argument ARM: dts: aspeed-g6: Add pinctrl settings ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0 ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller. ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb. Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.comSigned-off-by:
-
Linus Walleij authored
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changed for v5.14: - set 128bytes FIFO size on uart A - add Banana PI BPI-M5 board dts & bindings - meson-sm1: add toacodec node to use internal audio DAC - enable hdmi audio loopback on VIM3 board * tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: set 128bytes FIFO size on uart A arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add toacodec node arm64: dts: meson: vim3: enable hdmi audio loopback Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.comSigned-off-by:
-
Corentin Labbe authored
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.comSigned-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
Adds welltech,epbx100 as a valid intel-ixp4xx board. Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.comSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Corentin Labbe authored
Add vendor prefix for Welltech computer Co Ld. Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.comSigned-off-by:
-
- 10 Jun, 2021 11 commits
-
-
Alexandre Torgue authored
On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are: -"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed. Signed-off-by:Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
Fix the following dtbs_check warning: spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$' Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Marek Vasut authored
Fix the following dtbs_check warning: eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$' Signed-off-by:
-
Marek Vasut authored
Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Grzegorz Szymaszek authored
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by:
Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by:
-
Grzegorz Szymaszek authored
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was incompatible with the pins used on the Odyssey board, where: - there are 8 data pins instead of 12, - DCMI_HSYNC is available at PA4 instead of PH8, - DCMI_D0 is at PC6 instead of PH9, - DCMI_D3 is at PE1 instead of PH12, - DCMI_D4 is at PE11 instead of PH14, - DCMI_D5 is at PD3 instead of PI4, - DCMI_D6 is at PE13 instead of PB8, - DCMI_D7 is at PB9 instead of PE6. Add the DCMI pins used on the Odyssey board as a new DCMI pin state definition, dcmi-1, AKA phandle dcmi_pins_b. Signed-off-by:
-
Alexandre Torgue authored
It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: -
Alexandre Torgue authored
ptp_ref clk has been added in DT but not documented which makes yaml validation failed: ethernet@5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123], [6, 169], [6, 112]] is too long ethernet@5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx', 'eth-ck', 'ptp_ref', 'ethstp'] is too long Reviewed-by:
-
Alexandre Torgue authored
It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: -
Alexandre Torgue authored
Replace upper case by lower case in i2c nodes name. Signed-off-by: -
Alexandre Torgue authored
Update node name to avoid a DT schema validation issue seen with "make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU. Signed-off-by:
-
- 09 Jun, 2021 1 commit
-
-
Florian Fainelli authored
- Fixup MMC node names - Fixup led node names - Introduce new devicetree file for Raspberry Pi 400 - Introduce devicetree bindings for Raspberry Pi 400 - Fix issue with dwc2's FIFO's size - Add VEC compatible for bcm2711 Signed-off-by:Florian Fainelli <f.fainelli@gmail.com>
-
- 08 Jun, 2021 8 commits
-
-
Stefan Wahren authored
This adds a reference to the dts of the Raspberry Pi 400, so we don't need to maintain the content in arm64. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://lore.kernel.org/r/1622981777-5023-8-git-send-email-stefan.wahren@i2se.comSigned-off-by:
-
Stefan Wahren authored
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there are some minor differences: - higher CPU clock rate (1.8 GHz) - different Wifi chip (BCM43456) - power off is now handled via GPIO - no ACT LED Signed-off-by:
-
Stefan Wahren authored
Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by:
-
Stefan Wahren authored
Add new Raspberry Pi 400 to DT schema. Signed-off-by:
-
Stefan Wahren authored
There is a lot of Raspberry Pi specific stuff (neither SoC or board specific) for the BCM2711 which is currently in the RPi 4 B dts. In order to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it into a separate dtsi. Signed-off-by:
-
Stefan Wahren authored
Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by:
-
Mateusz Kwiatkowski authored
The BCM2711 has a slightly different VEC than the one found in the older SoCs. Now that we support the new variant, add its compatible to the device tree. Signed-off-by:
Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.techSigned-off-by:
-
Stefan Wahren authored
This reverts commit 278407a5. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a5 ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by:
-
- 07 Jun, 2021 5 commits
-
-
Vishwanatha Subbanna authored
These are leds on the IBM proprietary PCIE cards called cable cards. Cable cards have 2 ports on them and each port has an indicator led. Signed-off-by:
Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
-
Vishwanatha Subbanna authored
This commit adds indicator leds for vrms, processors, opencapi connectors, tpm, planar, power distribution card and dasd backplane and are driven by PIC16F882. Signed-off-by:
-
Vishwanatha Subbanna authored
These are dimm indicator leds driven by PIC16F882. Signed-off-by:
-
Vishwanatha Subbanna authored
These are pcie slot indicator leds driven by PCA9552. Signed-off-by:
-
Vishwanatha Subbanna authored
These are the indicator leds for nvme slots and fans and are driven by PCA9552. Signed-off-by:
-
