- 18 Sep, 2022 34 commits
-
-
Dmitry Baryshkov authored
The commit 85936d4f ("phy: qcom-qmp: add regulator_set_load to dp phy") moved setting regulator load to the DP PHY driver (QMP). Then, the commit 7516351b ("drm/msm/dp: delete vdda regulator related functions from eDP/DP controller") removed support for VDDA supplies from the DP controller driver. Mark these properties as deprecated and drop them from the example. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/498748/ Link: https://lore.kernel.org/r/20220822184900.307160-2-dmitry.baryshkov@linaro.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Stephen Boyd authored
This API isn't really more than a couple lines now that we don't store the pixel_rate to the struct member. Inline it into the caller. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
This struct member is stored to in the function that calls the function which uses it. That's possible with a function argument instead of storing to a struct member. Pass the pixel_rate as an argument instead to simplify the code. Note that dp_ctrl_link_maintenance() was storing the pixel_rate but never using it so we just remove the assignment from there. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
Let's move these functions around to avoid having to forward declare dp_ctrl_on_stream_phy_test_report(). Also remove dp_ctrl_reinitialize_mainlink() forward declaration because we're doing that sort of task. Reviewed-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Dmitry Baryshkov authored
Instead of querying the CTL for the flush mask (for SSPP, LM or DSPP), storing the mask in the mixer configuration and then pushing the mask to the CTL, tell CTL to cache the flush in place. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473159/ Link: https://lore.kernel.org/r/20220209172520.3719906-9-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
There is no need to keep a separate function for calling into the ctl if we already know all the details. Inline this function in the dpu_crtc.c Signed-off-by:
-
Dmitry Baryshkov authored
Stop limiting zpos property values, we use normalized_zpos anyway. And nothing stops userspace from assigning several planes to a single zpos (it is a userspace bug, but the kernel is forgiving about it). Signed-off-by:
-
Dmitry Baryshkov authored
Master/virtual planes were used for multirect support. In preparation to reworking DPU planes, drop support for master planes (which was not used anyway). Signed-off-by:
-
Dmitry Baryshkov authored
Follow up the merge of address fields and drop the variable that became unused after the commit 9403f9a4 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map"). Fixes: 9403f9a4 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map") Signed-off-by:
-
Javier Martinez Canillas authored
Drivers' .remove and .shutdown callbacks are executed on different code paths. The former is called when a device is removed from the bus, while the latter is called at system shutdown time to quiesce the device. This means that some overlap exists between the two, because both have to take care of properly shutting down the hardware. But currently the logic used in these two callbacks isn't consistent in msm drivers, which could lead to kernel panic. For example, on .remove the component is deleted and its .unbind callback leads to the hardware being shutdown but only if the DRM device has been marked as registered. That check doesn't exist in the .shutdown logic and this can lead to the driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't been properly initialized. A situation like this can happen if drivers for expected sub-devices fail to probe, since the .bind callback will never be executed. If that is the case, drm_atomic_helper_shutdown() will attempt to take mutexes that are only initialized if drm_mode_config_init() is called during a device bind. This bug was attempted to be fixed in commit 623f279c ("drm/msm: fix shutdown hook in case GPU components failed to bind"), but unfortunately it still happens in some cases as the one mentioned above, i.e: systemd-shutdown[1]: Powering off. kvm: exiting hardware virtualization platform wifi-firmware.0: Removing from iommu group 12 platform video-firmware.0: Removing from iommu group 10 ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0 ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0 lr : drm_modeset_lock_all_ctx+0x48/0x3d0 sp : ffff80000805bb80 x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030 x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800 x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0 Call trace: drm_modeset_lock_all_ctx+0x3c4/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 ---[ end trace 0000000000000000 ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000 [0000000000000018] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ww_mutex_lock+0x28/0x32c lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0 sp : ffff80000805bb50 x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018 x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800 x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018 Call trace: ww_mutex_lock+0x28/0x32c drm_modeset_lock_all_ctx+0x1b0/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Kernel Offset: 0x495d77c00000 from 0xffff800008000000 PHYS_OFFSET: 0xffffcd8500000000 CPU features: 0x800,00c2a015,19801c82 Memory Limit: none ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 9d5cbf5f ("drm/msm: add shutdown support for display platform_driver") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Jason Wang authored
The double `be' is duplicated in the comment, remove one. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Reviewed-by:
-
Dmitry Baryshkov authored
Drop the dpu_cfg variable and corresponding kzalloc, which became unused after changing hw catalog to static configuration. Fixes: de7d480f ("drm/msm/dpu: make dpu hardware catalog static const") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dmitry Baryshkov authored
We do not expect to have other VBIFs. Drop VBIF_n indices and always use VBIF_RT and VBIF_NRT. Reviewed-by:
-
Dmitry Baryshkov authored
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If the value is NULL, then the function will return 0 instead of a proper return code. Moreover dpu_hw_vbif_init() function can not return NULL. So, replace corresponding IS_ERR_OR_NULL() call with IS_ERR(). Reviewed-by:
-
Dmitry Baryshkov authored
Remove loops over hw_vbif. Instead always VBIF's idx as an index in the array. This fixes an error in dpu_kms_hw_init(), where we fill dpu_kms->hw_vbif[i], but check for an error pointer at dpu_kms->hw_vbif[vbif_idx]. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
-
Dmitry Baryshkov authored
The commit 6874f48b ("drm/msm: make mdp5/dpu devices master components") changed the MDP5 driver to look for the interconnect paths in the MDSS device rather than in the MDP5 device itself. This was left unnoticed since on my testing devices the interconnects probably didn't reach the sync state. Rather than just using the MDP5 device for ICC path lookups for the MDP5 devices, introduce an additional helper to check both MDP5/DPU and MDSS nodes. This will be helpful for the MDP5->DPU conversion, since the driver will have to check both nodes. Fixes: 6874f48b ("drm/msm: make mdp5/dpu devices master components") Reported-by:
Marijn Suijten <marijn.suijten@somainline.org> Reported-by:
Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 3d7a0dd8 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 57fd4f34 ("dt-bindings: msm: add DT bindings for sc7280") Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 3d7a0dd8 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings") Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 164f69d9 ("dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings") Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 6e986a8f ("dt-bindings: display: msm: Add binding for msm8998 dpu") Signed-off-by:
-
Dmitry Baryshkov authored
APQ8064, the only supported mdp4 platform, uses 4 IOMMUs for the MDP4 device. Update schema accordingly. When we have other MDP4 platforms, this spec can be updated accordingly. Signed-off-by:
-
Dmitry Baryshkov authored
Make display/msm/gmu.yaml describe all existing GMU variants rather than just the 630.2 (SDM845) version of it. Signed-off-by:
-
Dmitry Baryshkov authored
Different platforms require different amounts of IOMMUs. The APQ8064 uses 64 IOMMU instances for GPU, adjust the schema accordingly. Signed-off-by:
-
Dmitry Baryshkov authored
There is no need to use the struct msm_display_dsc_config wrapper inside the dsi driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by:
-
Dmitry Baryshkov authored
There is no need to use the struct msm_display_dsc_config wrapper inside the dpu driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by:
-
Rob Clark authored
If the previous thing cat'ing $debugfs/rd left the FIFO full, then subsequent open could deadlock in rd_write() (because open is blocked, not giving a chance for read() to consume any data in the FIFO). Also it is generally a good idea to clear out old data from the FIFO. Signed-off-by:
-
Bjorn Andersson authored
In the event that devm_devfreq_add_device() fails the device's qos freq list is left referencing df->idle_freq and df->boost_freq. Attempting to initialize devfreq again after a probe deferral will then cause invalid memory accesses in dev_pm_qos_add_request(). Fix this by dropping the requests in the error path. Fixes: 7c0ffcd4 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
-
Douglas Anderson authored
1 regulator is listed but the number 2 is specified. This presumably means we try to get a regulator with no name. Fix it. Fixes: 462f7017 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Douglas Anderson authored
3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by:
-
Kuogee Hsieh authored
Data Symbols scrambled is required for tps4 at link training 2. Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to work. RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter measurement with minimal equipment for embedded applications purpose and is not required to be set during normal operation. Current implementation always have RECOVERED_CLOCK_OUT_EN bit set which cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent tps4 from working. This patch delete setting RECOVERED_CLOCK_OUT_EN to fix SCRAMBLING_DISABLE be wrongly set at tps4. Changes in v2: -- fix Fixes tag Changes in v3: -- revise commit text Changes in v4: -- fix commit text newline Changes in v5: -- fix commit text line over 75 chars Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Signed-off-by:
-
Abhinav Kumar authored
dpu_encoder_helper_phys_cleanup() was not populating neither wb or intf to the intf_cfg before calling the reset_intf_cfg(). This causes the reset of the active bits of wb/intf to be skipped which is incorrect. Fix this by populating the relevant wb or intf indices correctly. Fixes: ae4d721c ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Patchwork: https://patchwork.freedesktop.org/patch/494298/ Link: https://lore.kernel.org/r/1657912468-17254-1-git-send-email-quic_abhinavk@quicinc.comSigned-off-by:
-
sunliming authored
Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3(). Fix the following smatch warnings: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting Fixes: f1fa7ff4 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by:
sunliming <sunliming@kylinos.cn> Reviewed-by:
-
Kuogee Hsieh authored
Some userspace presumes that the first connected connector is the main display, where it's supposed to display e.g. the login screen. For laptops, this should be the main panel. This patch call drm_helper_move_panel_connectors_to_head() after drm_bridge_connector_init() to make sure eDP stay at head of connected connector list. This fixes unexpected corruption happen at eDP panel if eDP is not placed at head of connected connector list. Changes in v2: -- move drm_helper_move_panel_connectors_to_head() to dpu_kms_drm_obj_init() Changes in v4: -- move drm_helper_move_panel_connectors_to_head() to msm_drm_init() Signed-off-by:
-
- 01 Sep, 2022 1 commit
-
-
Akhil P Oommen authored
When prepare-slumber hfi fails, we should follow a6xx_gmu_force_off() sequence. Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498401/ Link: https://lore.kernel.org/r/20220819015030.v5.7.I54815c7c36b80d4725cd054e536365250454452f@changeidSigned-off-by:
-
- 28 Aug, 2022 5 commits
-
-
Akhil P Oommen authored
We can do a few more things to improve our chance at a successful gpu recovery, especially during a hangcheck timeout: 1. Halt CP and GMU core 2. Do RBBM GBIF HALT sequence 3. Do a soft reset of GPU core Signed-off-by:
-
Akhil P Oommen authored
Because there could be transient votes from other drivers/tz/hyp which may keep the cx gdsc enabled, we should poll until cx gdsc collapses. We can use the reset framework to poll for cx gdsc collapse from gpucc clk driver. This feature requires support from the platform's gpucc driver. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Patchwork: https://patchwork.freedesktop.org/patch/498397/ Link: https://lore.kernel.org/r/20220819015030.v5.5.I176567525af2b9439a7e485d0ca130528666a55c@changeidSigned-off-by:
-
Akhil P Oommen authored
There are some hardware logic under CX domain. For a successful recovery, we should ensure cx headswitch collapses to ensure all the stale states are cleard out. This is especially true to for a6xx family where we can GMU co-processor. Currently, cx doesn't collapse due to a devlink between gpu and its smmu. So the *struct gpu device* needs to be runtime suspended to ensure that the iommu driver removes its vote on cx gdsc. Signed-off-by:
-
Akhil P Oommen authored
In the scenario where there is one a single submit which is hung, gpu is power collapsed when it is retired. Because of this, by the time we call reover(), gpu state would be already clear. Fix this by correctly managing the pm runtime votes. Signed-off-by:
-
Akhil P Oommen authored
Instead of separate refcount for each submit, take single rpm refcount on behalf of all the submits. This makes it easier to drop the rpm refcount during recovery in an upcoming patch. Signed-off-by:
-
