Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Pull staging/IIO driver fixes from Greg KH:
 "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Pull tty/serial fixes from Greg KH:
 "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

Pull irq fixes from Borislav Petkov:

 - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.

 - Fix to not lose IPIs on bcm2836.

 - Fix for a bogus marking of ITS devices as shared due to unitialized
   stack variable.

 - Clear a phantom interrupt on qcom-pdc to unblock suspend.

 - Small cleanups, warning and build fixes.

* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export irq_check_status_bit()
  irqchip/mips-cpu: Set IPI domain parent chip
  irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
  irqchip/loongson-liointc: Fix build warnings
  driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
  irqchip/irq-sl28cpld: Convert comma to semicolon
  genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()

Pull objtool fixes from Borislav Petkov:

 - Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

 - Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

 - Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree

Pull scheduler fixes from Borislav Petkov:

 - Correct the marking of kthreads which are supposed to run on a
   specific, single CPU vs such which are affine to only one CPU, mark
   per-cpu workqueue threads as such and make sure that marking
   "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.

 - A fix to not push away tasks on CPUs coming online.

 - Have workqueue CPU hotplug code use cpu_possible_mask when breaking
   affinity on CPU offlining so that pending workers can finish on newly
   arrived onlined CPUs too.

 - Dump tasks which haven't vacated a CPU which is currently being
   unplugged.

 - Register a special scale invariance callback which gets called on
   resume from RAM to read out APERF/MPERF after resume and thus make
   the schedutil scaling governor more precise.

* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Relax the set_cpus_allowed_ptr() semantics
  sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
  sched: Prepare to use balance_push in ttwu()
  workqueue: Restrict affinity change to rescuer
  workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
  kthread: Extract KTHREAD_IS_PER_CPU
  sched: Don't run cpu-online with balance_push() enabled
  workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
  sched/core: Print out straggler tasks in sched_cpu_dying()
  x86: PM: Register syscore_ops for scale invariance

Pull timer fixes from Borislav Petkov:

 - Fix an integer overflow in the NTP RTC synchronization which led to
   the latter happening every 2 seconds instead of the intended every 11
   minutes.

 - Get rid of now unused get_seconds().

* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Fix RTC synchronization on 32-bit platforms
  timekeeping: Remove unused get_seconds()

Pull x86 fixes from Borislav Petkov:

 - Add a new Intel model number for Alder Lake

 - Differentiate which aspects of the FPU state get saved/restored when
   the FPU is used in-kernel and fix a boot crash on K7 due to early
   MXCSR access before CR4.OSFXSR is even set.

 - A couple of noinstr annotation fixes

 - Correct die ID setting on AMD for users of topology information which
   need the correct die ID

 - A SEV-ES fix to handle string port IO to/from kernel memory properly

* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add another Alder Lake CPU to the Intel family
  x86/mmx: Use KFPU_387 for MMX string operations
  x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
  x86/topology: Make __max_die_per_package available unconditionally
  x86: __always_inline __{rd,wr}msr()
  x86/mce: Remove explicit/superfluous tracing
  locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
  locking/lockdep: Cure noinstr fail
  x86/sev: Fix nonistr violation
  x86/entry: Fix noinstr fail
  x86/cpu/amd: Set __max_die_per_package on AMD
  x86/sev-es: Handle string port IO to kernel memory properly

Pull powerpc fixes from Michael Ellerman:

 - Fix a bad interaction between the scv handling and the fallback L1D
   flush, which could lead to user register corruption. Only affects
   people using scv (~no one) on machines with old firmware that are
   missing the L1D flush.

 - Two small selftest fixes.

Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.

* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: fix scv entry fallback flush vs interrupt
  selftests/powerpc: Only test lwm/stmw on big endian
  selftests/powerpc: Fix exit status of pkey tests

Pull misc fixes from Christian Brauner:

 - Jann reported sparse complaints because of a missing __user
   annotation in a helper we added way back when we added
   pidfd_send_signal() to avoid compat syscall handling. Fix it.

 - Yanfei replaces a reference in a comment to the _do_fork() helper I
   removed a while ago with a reference to the new kernel_clone()
   replacement

 - Alexander Guril added a simple coding style fix

* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  kthread: remove comments about old _do_fork() helper
  Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
  signal: Add missing __user annotation to copy_siginfo_from_user_any

Pull cifs fixes from Steve French:
 "An important signal handling patch for stable, and two small cleanup
  patches"

* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not fail __smb_send_rqst if non-fatal signals are pending
  fs/cifs: Simplify bool comparison.
  fs/cifs: Assign boolean values to a bool variable

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: omap: Use BCH private fields in the specific OOB layout
  mtd: spinand: Fix MTD_OPS_AUTO_OOB requests
  mtd: rawnand: intel: check the mtd name only after setting the variable
  mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine
  mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload

Pull i2c fixes from Wolfram Sang:
 "Another bunch  of driver fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sprd: depend on COMMON_CLK to fix compile tests
  Revert "i2c: imx: Remove unused .id_table support"
  i2c: octeon: check correct size of maximum RECV_LEN packet
  i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
  i2c: bpmp-tegra: Ignore unknown I2C_M flags
  i2c: tegra: Wait for config load atomically while in ISR

Pull SCSI fixes from James Bottomley:
 "Twelve minor fixes, all in drivers or doc.

  Most of the fixes are pretty obvious (although we had two goes to get
  the UFS sysfs doc right) and the biggest change is in the ufs driver
  which they've extensively tested"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvfc: Set default timeout to avoid crash during migration
  scsi: target: tcmu: Fix use-after-free of se_cmd->priv
  scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
  scsi: libfc: Avoid invoking response handler twice if ep is already completed
  scsi: scsi_transport_srp: Don't block target in failfast state
  scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting
  scsi: ufs: Fix tm request when non-fatal error happens
  scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns()
  scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handle
  scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM
  scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression
  scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode

Merge tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah :
 "Five fixes to the kunit tool and documentation from Daniel Latypov and
  David Gow"

* tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: move kunitconfig parsing into __init__, make it optional
  kunit: tool: fix minor typing issue with None status
  kunit: tool: surface and address more typing issues
  Documentation: kunit: include example of a parameterized test
  kunit: tool: Fix spelling of "diagnostic" in kunit_parser

RHBZ 1848178

The original intent of returning an error in this function
in the patch:
  "CIFS: Mask off signals when sending SMB packets"
was to avoid interrupting packet send in the middle of
sending the data (and thus breaking an SMB connection),
but we also don't want to fail the request for non-fatal
signals even before we have had a chance to try to
send it (the reported problem could be reproduced e.g.
by exiting a child process when the parent process was in
the midst of calling futimens to update a file's timestamps).

In addition, since the signal may remain pending when we enter the
sending loop, we may end up not sending the whole packet before
TCP buffers become full. In this case the code returns -EINTR
but what we need here is to return -ERESTARTSYS instead to
allow system calls to be restarted.

Fixes: b30c74c7 ("CIFS: Mask off signals when sending SMB packets")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM integrity crash if "recalculate" used without "internal_hash"

 - Fix DM integrity "recalculate" support to prevent recalculating
   checksums if we use internal_hash or journal_hash with a key (e.g.
   HMAC). Use of crypto as a means to prevent malicious corruption
   requires further changes and was never a design goal for
   dm-integrity's primary usecase of detecting accidental corruption.

 - Fix a benign dm-crypt copy-and-paste bug introduced as part of a fix
   that was merged for 5.11-rc4.

 - Fix DM core's dm_get_device() to avoid filesystem lookup to get block
   device (if possible).

* tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: avoid filesystem lookup in dm_get_dev_t()
  dm crypt: fix copy and paste bug in crypt_alloc_req_aead
  dm integrity: conditionally disable "recalculate" feature
  dm integrity: fix a crash if "recalculate" used without "internal_hash"

Merge tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix id index used in Intel PT for heterogeneous systems

 - Fix overrun issue in 'perf script' for dynamically-allocated PMU type
   number

 - Fix 'perf stat' metrics containing the 'duration_time' synthetic
   event

 - Fix system PMU 'perf stat' metrics

* tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix overrun issue for dynamically-allocated PMU type number
  perf metricgroup: Fix system PMU metrics
  perf metricgroup: Fix for metrics containing duration_time
  perf evlist: Fix id index for heterogeneous systems

Pull arm64 fixes from Catalin Marinas:

 - Correctly mask out bits 63:60 in a kernel tag check fault address
   (specified as unknown by the architecture). Previously they were just
   zeroed but for kernel pointers they need to be all ones.

 - Fix a panic (unexpected kernel BRK exception) caused by kprobes being
   reentered due to an interrupt.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
  kasan, arm64: fix pointer tags in KASAN reports

Pull ceph fixes from Ilya Dryomov:
 "A patch to zero out sensitive cryptographic data and two minor
  cleanups prompted by the fact that a bunch of code was moved in this
  cycle"

* tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client:
  libceph: fix "Boolean result is used in bitwise operation" warning
  libceph, ceph: disambiguate ceph_connection_operations handlers
  libceph: zero out session key and connection secret

Pull typo fix from Mike Rapoport:
 "Fix typo in comment of memblock_phys_alloc_try_nid()"

* tag 'fixes-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix initialization of block size when ext_csd isn't present

  MMC host:
   - sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
   - sdhci-of-dwcmshc: Fix request accessing RPMB
   - sdhci-xenon: Fix 1.8v regulator stabilization"

* tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: don't initialize block size from ext_csd if not present
  mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
  mmc: sdhci-xenon: fix 1.8v regulator stabilization
  mmc: sdhci-of-dwcmshc: fix rpmb access

Merge tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A small collection of bug-fixes and model-specific quirks"

* tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
  platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
  platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
  platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
  platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
  platform/x86: thinkpad_acpi: correct palmsensor error checking
  platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
  platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
  platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
  platform/surface: SURFACE_PLATFORMS should depend on ACPI
  platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
  tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
  tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency

I was hitting the below panic continuously when attaching kprobes to
scheduler functions

	[  159.045212] Unexpected kernel BRK exception at EL1
	[  159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP
	[  159.059954] Modules linked in:
	[  159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f #56
	[rt-app] <notice> [1] Exiting.[  159.071166] Hardware name: ARM Juno development board (r2) (DT)
	[  159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--)

	[  159.085723] pc : 0xffff80001624501c
	[  159.089377] lr : attach_entity_load_avg+0x2ac/0x350
	[  159.094271] sp : ffff80001622b640
	[rt-app] <notice> [0] Exiting.[  159.097591] x29: ffff80001622b640 x28: 0000000000000001
	[  159.105515] x27: 0000000000000049 x26: ffff000800b79980

	[  159.110847] x25: ffff00097ef37840 x24: 0000000000000000
	[  159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90
	[  159.121663] x21: ffff00097ef37700 x20: ffff800010119170
	[rt-app] <notice> [11] Exiting.[  159.126995] x19: ffff00097ef37840 x18: 000000000000000e
	[  159.135003] x17: 0000000000000001 x16: 0000000000000019
	[  159.140335] x15: 0000000000000000 x14: 0000000000000000
	[  159.145666] x13: 0000000000000002 x12: 0000000000000002
	[  159.150996] x11: ffff80001592f9f0 x10: 0000000000000060
	[  159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1
	[  159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000
	[  159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000
	[  159.172321] x3 : ffff000800328948 x2 : 0000000000000000
	[  159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90
	[  159.182983] Call trace:
	[  159.185433]  0xffff80001624501c
	[  159.188581]  update_load_avg+0x2d0/0x778
	[  159.192516]  enqueue_task_fair+0x134/0xe20
	[  159.196625]  enqueue_task+0x4c/0x2c8
	[  159.200211]  ttwu_do_activate+0x70/0x138
	[  159.204147]  sched_ttwu_pending+0xbc/0x160
	[  159.208253]  flush_smp_call_function_queue+0x16c/0x320
	[  159.213408]  generic_smp_call_function_single_interrupt+0x1c/0x28
	[  159.219521]  ipi_handler+0x1e8/0x3c8
	[  159.223106]  handle_percpu_devid_irq+0xd8/0x460
	[  159.227650]  generic_handle_irq+0x38/0x50
	[  159.231672]  __handle_domain_irq+0x6c/0xc8
	[  159.235781]  gic_handle_irq+0xcc/0xf0
	[  159.239452]  el1_irq+0xb4/0x180
	[  159.242600]  rcu_is_watching+0x28/0x70
	[  159.246359]  rcu_read_lock_held_common+0x44/0x88
	[  159.250991]  rcu_read_lock_any_held+0x30/0xc0
	[  159.255360]  kretprobe_dispatcher+0xc4/0xf0
	[  159.259555]  __kretprobe_trampoline_handler+0xc0/0x150
	[  159.264710]  trampoline_probe_handler+0x38/0x58
	[  159.269255]  kretprobe_trampoline+0x70/0xc4
	[  159.273450]  run_rebalance_domains+0x54/0x80
	[  159.277734]  __do_softirq+0x164/0x684
	[  159.281406]  irq_exit+0x198/0x1b8
	[  159.284731]  __handle_domain_irq+0x70/0xc8
	[  159.288840]  gic_handle_irq+0xb0/0xf0
	[  159.292510]  el1_irq+0xb4/0x180
	[  159.295658]  arch_cpu_idle+0x18/0x28
	[  159.299245]  default_idle_call+0x9c/0x3e8
	[  159.303265]  do_idle+0x25c/0x2a8
	[  159.306502]  cpu_startup_entry+0x2c/0x78
	[  159.310436]  secondary_start_kernel+0x160/0x198
	[  159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0)

After a bit of head scratching and debugging it turned out that it is
due to kprobe handler being interrupted by a tick that causes us to go
into (I think another) kprobe handler.

The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR
which leads to the Unexpected kernel BRK exception.

Reverting commit ba090f9c ("arm64: kprobes: Remove redundant
kprobe_step_ctx") seemed to fix the problem for me.

Further analysis showed that kcb->kprobe_status is set to
KPROBE_REENTER when the error occurs. By teaching
kprobe_breakpoint_ss_handler() to handle this status I can no  longer
reproduce the problem.

Fixes: ba090f9c ("arm64: kprobes: Remove redundant kprobe_step_ctx")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that we have KTHREAD_IS_PER_CPU to denote the critical per-cpu
tasks to retain during CPU offline, we can relax the warning in
set_cpus_allowed_ptr(). Any spurious kthread that wants to get on at
the last minute will get pushed off before it can run.

While during CPU online there is no harm, and actual benefit, to
allowing kthreads back on early, it simplifies hotplug code and fixes
a number of outstanding races.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lai jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.240724591@infradead.org

Prior to commit 1cf12e08 ("sched/hotplug: Consolidate task
migration on CPU unplug") we'd leave any task on the dying CPU and
break affinity and force them off at the very end.

This scheme had to change in order to enable migrate_disable(). One
cannot wait for migrate_disable() to complete while stuck in
stop_machine(). Furthermore, since we need at the very least: idle,
hotplug and stop threads at any point before stop_machine, we can't
break affinity and/or push those away.

Under the assumption that all per-cpu kthreads are sanely handled by
CPU hotplug, the new code no long breaks affinity or migrates any of
them (which then includes the critical ones above).

However, there's an important difference between per-cpu kthreads and
kthreads that happen to have a single CPU affinity which is lost. The
latter class very much relies on the forced affinity breaking and
migration semantics previously provided.

Use the new kthread_is_per_cpu() infrastructure to tighten
is_per_cpu_kthread() and fix the hot-unplug problems stemming from the
change.

Fixes: 1cf12e08 ("sched/hotplug: Consolidate task migration on CPU unplug")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.102416009@infradead.org

In preparation of using the balance_push state in ttwu() we need it to
provide a reliable and consistent state.

The immediate problem is that rq->balance_callback gets cleared every
schedule() and then re-set in the balance_push_callback() itself. This
is not a reliable signal, so add a variable that stays set during the
entire time.

Also move setting it before the synchronize_rcu() in
sched_cpu_deactivate(), such that we get guaranteed visibility to
ttwu(), which is a preempt-disable region.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.966069627@infradead.org

create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.

Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.

Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.826629830@infradead.org

Mark the per-cpu workqueue workers as KTHREAD_IS_PER_CPU.

Workqueues have unfortunate semantics in that per-cpu workers are not
default flushed and parked during hotplug, however a subset does
manual flush on hotplug and hard relies on them for correctness.

Therefore play silly games..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.693465814@infradead.org

There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.

Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.

However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.

Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.

Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org

We don't need to push away tasks when we come online, mark the push
complete right before the CPU dies.

XXX hotplug state machine has trouble with rollback here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.415606087@infradead.org

The scheduler won't break affinity for us any more, and we should
"emulate" the same behavior when the scheduler breaks affinity for
us.  The behavior is "changing the cpumask to cpu_possible_mask".

And there might be some other CPUs online later while the worker is
still running with the pending work items.  The worker should be allowed
to use the later online CPUs as before and process the work items ASAP.
If we use cpu_active_mask here, we can't achieve this goal but
using cpu_possible_mask can.

Fixes: 06249738 ("workqueue: Manually break affinity on hotplug")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210111152638.2417-4-jiangshanlai@gmail.com

Since commit

  1cf12e08 ("sched/hotplug: Consolidate task migration on CPU unplug")

tasks are expected to move themselves out of a out-going CPU. For most
tasks this will be done automagically via BALANCE_PUSH, but percpu kthreads
will have to cooperate and move themselves away one way or another.

Currently, some percpu kthreads (workqueues being a notable exemple) do not
cooperate nicely and can end up on an out-going CPU at the time
sched_cpu_dying() is invoked.

Print the dying rq's tasks to shed some light on the stragglers.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210113183141.11974-1-valentin.schneider@arm.com

make sure ASPM state sync with pcr->aspm_enabled
init value pcr->aspm_enabled

Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20210122081906.19100-1-ricky_wu@realtek.com
Fixes: d928061c ("misc: rtsx: modify en/disable aspm function")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit "tty: implement write_iter", I left the write_iter conversion
of the hung up tty case alone, because I incorrectly thought it didn't
matter.

Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion.  Fix it all up.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The I2C_SPRD uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with LANTIQ):

    /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe':
    i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent'

Fixes: 4a2d5f66 ("i2c: Enable compile testing for more drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Coldfire platforms are non-DT users of this driver, so
keep the .id_table support.

This reverts commit c610199c.

Fixes: c610199c (i2c: imx: Remove unused .id_table support")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull OpenRISC fixes from Stafford Horne:

 - Compiler warning fixup for new Litex SoC driver

 - Sparse warning fixup for iounmap

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: io: Add missing __iomem annotation to iounmap()
  soc: litex: Fix compile warning when device tree is not configured