- 16 Oct, 2018 3 commits
-
-
Alan Tull authored
Add devm_fpga_region_create() which is the managed version of fpga_region_create(). Change current region drivers to use devm_fpga_region_create(). Signed-off-by:
Alan Tull <atull@kernel.org> Suggested-by:
Federico Vaga <federico.vaga@cern.ch> Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Tull authored
Add devm_fpga_bridge_create() which is the managed version of fpga_bridge_create(). Change current bridge drivers to use devm_fpga_bridge_create(). Signed-off-by:
-
Alan Tull authored
Add devm_fpga_mgr_create() which is the managed version of fpga_mgr_create(). Change current FPGA manager drivers to use devm_fpga_mgr_create() Signed-off-by:
-
- 15 Oct, 2018 22 commits
-
-
Lance Roy authored
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by:
Lance Roy <ldr709@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Lance Roy authored
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by:
Robin Holt <robinmholt@gmail.com> Signed-off-by:
-
Jean Delvare authored
The EEPROMs which hold the SPD data on DDR4 memory modules are no longer standard AT24C02-compatible EEPROMs. They are 512-byte EEPROMs which use only 1 I2C address for data access. You need to switch between the lower page and the upper page of data by sending commands on the SMBus. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/misc/eeprom/at25.c: In function 'at25_remove': drivers/misc/eeprom/at25.c:384:20: warning: variable 'at25' set but not used [-Wunused-but-set-variable] Since commit 96d08fb4 ("eeprom: at25: use devm_nvmem_register()"), at25_remove is do nothing, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Julien Folly authored
w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size). IAD Register is yet readable trough the "iad" sys file. A write to the "iad" sys file enables or disables the current measurement, but it was not possible to get the measured value by reading it. Fix: %u in snprintf for unsigned values (vdd and vad) Fix: Avoid possibles overflows (Usage of the 'count' variables) Signed-off-by:
Julien Folly <julien.folly@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_dma.c: In function 'scif_rma_list_dma_copy_wrapper': drivers/misc/mic/scif/scif_dma.c:1558:27: warning: variable 'dst_dma_addr' set but not used [-Wunused-but-set-variable] drivers/misc/mic/scif/scif_dma.c:1558:13: warning: variable 'src_dma_addr' set but not used [-Wunused-but-set-variable] They never used since introduction in commit 7cc31cd2 ("misc: mic: SCIF DMA and CPU copy interface") Signed-off-by:
-
Wenwen Wang authored
In _scif_prog_signal(), the boolean variable 'x100' is used to indicate whether the MIC Coprocessor is X100. If 'x100' is true, the status descriptor will be used to write the value to the destination. Otherwise, a DMA pool will be allocated for this purpose. Specifically, if the DMA pool is allocated successfully, two memory addresses will be returned. One is for the CPU and the other is for the device to access the DMA pool. The former is stored to the variable 'status' and the latter is stored to the variable 'src'. After the allocation, the address in 'src' is saved to 'status->src_dma_addr', which is actually in the DMA pool, and 'src' is then modified. Later on, if an error occurs, the execution flow will transfer to the label 'dma_fail', which will check 'x100' and free up the allocated DMA pool if 'x100' is false. The point here is that 'status->src_dma_addr' is used for freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in the DMA pool. And thus, the device is able to modify this data. This can potentially cause failures when freeing up the DMA pool because of the modified device address. This patch avoids the above issue by using the variable 'src' (with necessary calculation) to free up the DMA pool. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Roman Kiryanov authored
checkpacth: Missing a blank line after declarations Signed-off-by:
Roman Kiryanov <rkir@google.com> Signed-off-by:
-
Roman Kiryanov authored
This casting is not required. Signed-off-by:
-
Roman Kiryanov authored
Undo effects of misc_register if driver's init fails after misc_register. Signed-off-by:
-
Roman Kiryanov authored
This is the last patch in the series of patches to move file-scope variables into the driver state. This change will help to introduce another version of the pipe driver (with different state) for the older host interface or having several instances of this device. Signed-off-by:
-
Roman Kiryanov authored
This is a series of patches to move mutable file-scope variables into the driver state. This change will help to introduce another version of the pipe driver (with different state) for the older host interface or having several instances of this device. Signed-off-by:
-
Roman Kiryanov authored
platform: goldfish: pipe: Move the file-scope goldfish_interrupt_tasklet variable into the driver state This is a series of patches to move mutable file-scope variables into the driver state. This change will help to introduce another version of the pipe driver (with different state) for the older host interface or having several instances of this device. Signed-off-by:
-
Furquan Shaikh authored
Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa, GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any information during S0ix suspend/resume paths. Traditional ACPI suspend S3 involves BIOS both during the suspend and the resume paths. However, modern suspend type like S0ix does not involve firmware on either of the paths. This command gives the firmware an opportunity to log any required information about the suspend and resume operations e.g. wake sources. Additionally, this change adds a module parameter to allow platforms to specifically enable S0ix logging if required. This prevents any other platforms from unnecessarily making a GSMI call which could have any side-effects. Tested by verifying that wake sources are correctly logged in eventlog. Signed-off-by:
Furquan Shaikh <furquan@chromium.org> Reviewed-by:
Aaron Durbin <adurbin@chromium.org> Reviewed-by:
Rajat Jain <rajatja@chromium.org> Signed-off-by:
Furquan Shaikh <furquan@google.com> Tested-by:
Ross Zwisler <zwisler@google.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Duncan Laurie authored
Instead of selecting EFI and EFI_VARS automatically when GSMI is enabled let that portion of the driver be conditionally compiled if EFI and EFI_VARS are enabled. This allows the rest of the driver (specifically event log) to be used if EFI_VARS is not enabled. To test: 1) verify that EFI_VARS is not automatically selected when CONFIG_GOOGLE_GSMI is enabled 2) verify that the kernel boots on Link and that GSMI event log is still available and functional 3) specifically boot the kernel on Alex to ensure it does not try to load efivars and that gsmi also does not load because it is not in the supported DMI table Signed-off-by:
Duncan Laurie <dlaurie@chromium.org> Reviewed-by:
Olof Johansson <olofj@chromium.org> Signed-off-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Filipe Brandenburger <filbranden@chromium.org> Signed-off-by:
-
Duncan Laurie authored
In order to use this coreboot needs board support for: CONFIG_ELOG=y CONFIG_ELOG_GSMI=y And the kernel driver needs enabled: CONFIG_GOOGLE_GSMI=y To test, verify that clean shutdown event is added to the log: > mosys eventlog list | grep 'Clean Shutdown' 11 | 2012-06-25 09:49:24 | Kernl Event | Clean Shutdown Signed-off-by:
Vadim Bendebury <vbendeb@chromium.org> Reviewed-by:
Stefan Reinauer <reinauer@chromium.org> Signed-off-by:
Justin TerAvest <teravest@chromium.org> [zwisler: update changelog for upstream] Signed-off-by:
-
Duncan Laurie authored
The sysfs handler should return the number of bytes consumed, which in the case of a successful write is the entire buffer. Also fix a bug where param.data_len was being set to (count - (2 * sizeof(u32))) instead of just (count - sizeof(u32)). The latter is correct because we skip over the leading u32 which is our param.type, but we were also incorrectly subtracting sizeof(u32) on the line where we were actually setting param.data_len: param.data_len = count - sizeof(u32); This meant that for our example event.kernel_software_watchdog with total length 10 bytes, param.data_len was just 2 prior to this change. To test, successfully append an event to the log with gsmi sysfs. This sample event is for a "Kernel Software Watchdog" > xxd -g 1 event.kernel_software_watchdog 0000000: 01 00 00 00 ad de 06 00 00 00 > cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog > mosys eventlog list | tail -1 14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog Signed-off-by:
-
Joel Fernandes (Google) authored
I am one of the main engineers working on ashmem. I have been fixing bugs in the driver and have been involved in the memfd conversion discussions and sending patches about that. I also have an understanding of the binder driver and was involved with some of the development on finer grained locking. So I would like to be added to the MAINTAINERS file for android drivers for review and maintenance of ashmem and other Android drivers. Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by:
Todd Kjos <tkjos@android.com> Signed-off-by:
-
Arnd Bergmann authored
nvmem_find_cell_by_index() is only called from inside an #ifdef, so we get a build warning without CONFIG_OF: drivers/nvmem/core.c:496:1: error: 'nvmem_find_cell_by_index' defined but not used [-Werror=unused-function] Move it into the same #ifdef as the caller to avoid the warning. Fixes: e888d445 ("nvmem: resolve cells from DT at registration time") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
Remove a variable that's no longer used from lpc18xx_eeprom_remove(). Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
-
Bartosz Golaszewski authored
We check if the pointer returned by __nvmem_device_get() is not NULL while we should actually check if it is not IS_ERR(nvmem). Fix it. While we're at it: fix the next error path where we should assign an error value to cell before returning. Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> [srinivas: rebased on top of next] Signed-off-by:
-
- 11 Oct, 2018 15 commits
-
-
zhong jiang authored
It is not safe to dereference an object before a null test. It is not needed and just remove them. Ftrace can be used instead. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
-
Colin Ian King authored
The check for ret < 0 is redundant as any places prior to this point where ret is set to an error value the code will exit out of the loop to the error exit label 'err'. Remove this redundant dead code. Detected by CoverityScan, CID#1339528 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alexander Shishkin authored
Instead of a local copy, use the memcat_p() helper to merge policy node attributes. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Alexander Shishkin authored
This adds a helper to paste 2 pointer arrays together, useful for merging various types of attribute arrays. There are a few places in the kernel tree where this is open coded, and I just added one more in the STM class. The naming is inspired by memset_p() and memcat(), and partial credit for it goes to Andy Shevchenko. This patch adds the function wrapped in a type-enforcing macro and a test module. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
-
Alexander Shishkin authored
Fix whitespace in the code for better readability, no functional changes. Signed-off-by:
-
Alexander Shishkin authored
Add the SPDX header to the STM class documentation. Signed-off-by:
-
Alexander Shishkin authored
The rules and order of identification of trace sources against the "stp-policy" have changed; update the documentation to reflect that. Signed-off-by:
-
Alexander Shishkin authored
Add a document describing MIPI SyS-T protocol driver usage. Signed-off-by:
-
Alexander Shishkin authored
This adds ABI documentation for the new configfs attributes that come with the MIPI SyS-T protocol driver. Signed-off-by:
-
Alexander Shishkin authored
This adds support for CLOCKSYNC SyS-T packets, that establish correlation between the transport clock (STP timestamps) and SyS-T timestamps. These packets are sent periodically to allow the decoder to keep both time sources in sync. Signed-off-by:
-
Alexander Shishkin authored
This adds support for MIPI SyS-T protocol as specified in an open standard [1]. In addition to marking message boundaries, it also supports tagging messages with the source UUID, to provide better distinction between trace sources, including payload length and timestamp in the message's metadata. This driver adds attributes to STP policy nodes to control/configure these metadata features. [1] https://www.mipi.org/specifications/sys-tSigned-off-by:
-
Alexander Shishkin authored
Now that the default framing protocol is factored out into its own driver, switch over to using the driver for writing data. To that end, make the policy code require a valid protocol name (or absence thereof, which is equivalent to "p_basic"). Also, to make transition easier, make stm class request "p_basic" module at initialization time. Signed-off-by:
-
Alexander Shishkin authored
The STP framing pattern that the stm class implicitly applies to the data payload is, in fact, a protocol. This patch moves the relevant code out of the stm core into its own driver module. Signed-off-by:
-
Alexander Shishkin authored
Add a helper to write a sequence of bytes as STP data packets. This is used by protocol drivers to output their metadata, as well as the actual data payload. Signed-off-by:
-
Alexander Shishkin authored
At the moment, the stm class applies a certain STP framing pattern to the data as it is written to the underlying STM device. In order to allow different framing patterns (aka protocols), this patch introduces the concept of STP protocol drivers, defines data structures and APIs for the protocol drivers to use. Signed-off-by:
-
