QCA MIPS support is being converted to pure OF. As part of this we are
dropping the SOC_AR* symbols. Additionally the SERIAL_AR933X style tty
is also found on a few SoCs newer that the AR933x.

This patch changes the dependency to ATH79, thus fixing the 2 issues
described above.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Altera 16550 UART core supports FCR Rx Trigger Level setting,
but the port definition in the driver is missing the rxtrig_bytes
array specifying the trigger levels. Add the array to make the Rx
Trigger Level setting available on this type of 16550 UART.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "unthrottle_timeout" is HZ/10 but mod_timer() takes a the actual
jiffie where you want it to timeout, not an offset.

Fixes: 5909c0bf ("serial/aspeed-vuart: Implement quick throttle mechanism")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 40f70c03 ("serial: sh-sci: add locking to console write
function to avoid SMP lockup") copied the strategy to avoid locking
problems in conjuncture with the console from the UART8250
driver. Instead using directly spin_{try}lock_irqsave(),
local_irq_save() followed by spin_{try}lock() was used. While this is
correct on mainline, for -rt it is a problem. spin_{try}lock() will
check if it is running in a valid context. Since the local_irq_save()
has already been executed, the context has changed and
spin_{try}lock() will complain. The reason why spin_{try}lock()
complains is that on -rt the spin locks are turned into mutexes and
therefore can sleep. Sleeping with interrupts disabled is not valid.

BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995
in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0
CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12
Hardware name: Generic RZ/G1 (Flattened Device Tree)
Backtrace:
[<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c)
 r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0
[<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94)
[<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194)
 r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000
[<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74)
 r5:c06f4d60 r4:c06f4d60
[<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118)
 r5:c06f4d60 r4:c06f4d60
[<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124)
 r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798
 r4:c06b9914 r3:c02576e4
[<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430)
 r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798
 r4:c06d2798 r3:00000028
[<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0)
 r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027
 r4:00000003
[<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30)
 r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c
 r4:c0062fa8
[<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14)
[<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84)
[<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc)
 r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523
 r4:00000006
[<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178)
 r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c
 r4:dfbcf680
[<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248)
 r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000
 r4:df525180
[<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c)
 r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00
 r4:decac000
[<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c)
 r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the 8250_of driver only supports MEM IO type
accesses.

Some development boards (Huawei D03, specifically) require
IO space access for 8250-compatible OF driver support, so
add it.

The modification is quite simple: just set the port iotype
and associated flags depending on the device address
resource type.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I was puzzled while looking at /proc/interrupts and random things showed
up between reboots. This occurred more often but I realised it later. The
"correct" output should be:
|38:      11861  atmel-aic5   2 Level     ttyS0

but I saw sometimes
|38:       6426  atmel-aic5   2 Level     tty1

and accounted it wrongly as correct. This is use after free and the
former example randomly got the "old" pointer which pointed to the same
content. With SLAB_FREELIST_RANDOM and HARDENED I even got
|38:       7067  atmel-aic5   2 Level     E=Started User Manager for UID 0

or other nonsense.
As it turns out the tty, pointer that is accessed in atmel_startup(), is
freed() before atmel_shutdown(). It seems to happen quite often that the
tty for ttyS0 is allocated and freed while ->shutdown is not invoked. I
don't do anything special - just a systemd boot :)

Use dev_name(&pdev->dev) as the IRQ name for request_irq(). This exists
as long as the driver is loaded so no use-after-free here.

Cc: stable@vger.kernel.org
Fixes: 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close")
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This properly unmaps DMA SG on device shutdown.
Reported-by: Nandor Han <nandor.han@ge.com>
Suggested-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unrelated CTSC/CTS disabling from imx_uart_disable_dma() and
move it to imx_uart_shutdown(), which is the only user of the DMA
disabling function. This should not change the driver's behaviour,
but improves readability. After this change imx_uart_disable_dma()
does the reverse thing of imx_uart_enable_dma().
Suggested-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add early console support in Qualcomm Technologies Inc., GENI based
UART controller.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the driver returns IRQ_HANDLED when spurious interrupts happen.
This is misleading. Fix the behavior by returning IRQ_NONE for spurious
interrupts.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use iowrite32_rep to write to the hardware FIFO so that the code does
not have to worry about the system endianness.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While initiating TX, only the register reads need to be ordered. The
register write order either is achieved due to data dependency or is
not required.

Use readl to achieve the read order and remove the unnecessary barrier.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Perform static initialization of console_port since its initial state has
no run-time dependencies.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use min3 helper to calculate the minimum value of 3 variables.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Remove redundant casting while using min_t
* Remove redundant initialization of port_setup flag
* Remove redundant error checking in get_tx_fifo_size
* Remove logging redundant error code in debug messages
* Remove redundant disable_irq before free_irq
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Document reason for newline character counting in console_write
* Document reason for disabling IRQ in the system resume operation
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The best granularity of residue that DMA engine can report is in the BURST
units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE
if it relies on exact number of bytes transferred by DMA engine.

Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As stated under "20) Conditional Compilation" in coding-style.rst. We
shall rather use __maybe_unused than preprocessor macros in such cases.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no reason to initialize uartclk to BASE_BAUD * 16 for DT based
systems.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 9b96fbac ("serial: PL011: clear pending interrupts")
clears the RX and receive timeout interrupts on pl011 startup, to
avoid a screaming-interrupt scenario that can occur when the
firmware or bootloader leaves these interrupts asserted.

This has been noted as an issue when running Linux on qemu [1].

Unfortunately, the above fix seems to lead to potential
misbehaviour if the RX FIFO interrupt is asserted _non_ spuriously
on driver startup, if the RX FIFO is also already full to the
trigger level.

Clearing the RX FIFO interrupt does not change the FIFO fill level.
In this scenario, because the interrupt is now clear and because
the FIFO is already full to the trigger level, no new assertion of
the RX FIFO interrupt can occur unless the FIFO is drained back
below the trigger level.  This never occurs because the pl011
driver is waiting for an RX FIFO interrupt to tell it that there is
something to read, and does not read the FIFO at all until that
interrupt occurs.

Thus, simply clearing "spurious" interrupts on startup may be
misguided, since there is no way to be sure that the interrupts are
truly spurious, and things can go wrong if they are not.

This patch instead clears the interrupt condition by draining the
RX FIFO during UART startup, after clearing any potentially
spurious interrupt.  This should ensure that an interrupt will
definitely be asserted if the RX FIFO subsequently becomes
sufficiently full.

The drain is done at the point of enabling interrupts only.  This
means that it will occur any time the UART is newly opened through
the tty layer.  It will not apply to polled-mode use of the UART by
kgdboc: since that scenario cannot use interrupts by design, this
should not matter.  kgdboc will interact badly with "normal" use of
the UART in any case: this patch makes no attempt to paper over
such issues.

This patch does not attempt to address the case where the RX FIFO
fills faster than it can be drained: that is a pathological
hardware design problem that is beyond the scope of the driver to
work around.  As a failsafe, the number of poll iterations for
draining the FIFO is limited to twice the FIFO size.  This will
ensure that the kernel at least boots even if it is impossible to
drain the FIFO for some reason.

[1] [Qemu-devel] [Qemu-arm] [PATCH] pl011: do not put into fifo
before enabled the interruption
https://lists.gnu.org/archive/html/qemu-devel/2018-01/msg06446.htmlReported-by: Wei Xu <xuwei5@hisilicon.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Fixes: 9b96fbac ("serial: PL011: clear pending interrupts")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the tty and serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Thomas Gleixner:
 "Another set of x86 related updates:

   - Fix the long broken x32 version of the IPC user space headers which
     was noticed by Arnd Bergman in course of his ongoing y2038 work.
     GLIBC seems to have non broken private copies of these headers so
     this went unnoticed.

   - Two microcode fixlets which address some more fallout from the
     recent modifications in that area:

      - Unconditionally save the microcode patch, which was only saved
        when CPU_HOTPLUG was enabled causing failures in the late
        loading mechanism

      - Make the later loader synchronization finally work under all
        circumstances. It was exiting early and causing timeout failures
        due to a missing synchronization point.

   - Do not use mwait_play_dead() on AMD systems to prevent excessive
     power consumption as the CPU cannot go into deep power states from
     there.

   - Address an annoying sparse warning due to lost type qualifiers of
     the vmemmap and vmalloc base address constants.

   - Prevent reserving crash kernel region on Xen PV as this leads to
     the wrong perception that crash kernels actually work there which
     is not the case. Xen PV has its own crash mechanism handled by the
     hypervisor.

   - Add missing TLB cpuid values to the table to make the printout on
     certain machines correct.

   - Enumerate the new CLDEMOTE instruction

   - Fix an incorrect SPDX identifier

   - Remove stale macros"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
  x86/setup: Do not reserve a crash kernel region if booted on Xen PV
  x86/cpu/intel: Add missing TLB cpuid values
  x86/smpboot: Don't use mwait_play_dead() on AMD systems
  x86/mm: Make vmemmap and vmalloc base address constants unsigned long
  x86/vector: Remove the unused macro FPU_IRQ
  x86/vector: Remove the macro VECTOR_OFFSET_START
  x86/cpufeatures: Enumerate cldemote instruction
  x86/microcode: Do not exit early from __reload_late()
  x86/microcode/intel: Save microcode patch unconditionally
  x86/jailhouse: Fix incorrect SPDX identifier

Pull x86 pti fixes from Thomas Gleixner:
 "A set of updates for the x86/pti related code:

   - Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the
     int$80 entry code removed that quite some time ago. Make it correct
     again.

   - A set of fixes for the Global Bit work which went into 4.17 and
     caused a bunch of interesting regressions:

      - Triggering a BUG in the page attribute code due to a missing
        check for early boot stage

      - Warnings in the page attribute code about holes in the kernel
        text mapping which are caused by the freeing of the init code.
        Handle such holes gracefully.

      - Reduce the amount of kernel memory which is set global to the
        actual text and do not incidentally overlap with data.

      - Disable the global bit when RANDSTRUCT is enabled as it
        partially defeats the hardening.

      - Make the page protection setup correct for vma->page_prot
        population again. The adjustment of the protections fell through
        the crack during the Global bit rework and triggers warnings on
        machines which do not support certain features, e.g. NX"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64/compat: Preserve r8-r11 in int $0x80
  x86/pti: Filter at vma->vm_page_prot population
  x86/pti: Disallow global kernel text with RANDSTRUCT
  x86/pti: Reduce amount of kernel text allowed to be Global
  x86/pti: Fix boot warning from Global-bit setting
  x86/pti: Fix boot problems from Global-bit setting

Pull timer fixes from Thomas Gleixner:
 "Two fixes from the timer departement:

   - Fix a long standing issue in the NOHZ tick code which causes RB
     tree corruption, delayed timers and other malfunctions. The cause
     for this is code which modifies the expiry time of an enqueued
     hrtimer.

   - Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
     regression reports. Seems userspace _is_ relying on the documented
     behaviour despite our hope that it wont"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
  tick/sched: Do not mess with an enqueued hrtimer

Pull perf fixes from Thomas Gleixner:
 "The perf update contains the following bits:

  x86:
   - Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP

  perf stat:
   - Keep the '/' event modifier separator in fallback, for example when
     fallbacking from 'cpu/cpu-cycles/' to user level only, where it
     should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri
     Olsa)

   - Fix PMU events parsing rule, improving error reporting for invalid
     events (Jiri Olsa)

   - Disable write_backward and other event attributes for !group events
     in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S'
     that has leader sampling (:S) and where just the 'cycles', the
     leader event, should have the write_backward attribute set, in this
     case it all fails because the PMU where 'msr/aperf/' lives doesn't
     accepts write_backward style sampling (Jiri Olsa)

   - Only fall back group read for leader (Kan Liang)

   - Fix core PMU alias list for x86 platform (Kan Liang)

   - Print out hint for mixed PMU group error (Kan Liang)

   - Fix duplicate PMU name for interval print (Kan Liang)

  Core:
   - Set main kernel end address properly when reading kernel and module
     maps (Namhyung Kim)

  perf mem:
   - Fix incorrect entries and add missing man options (Sangwon Hong)

  s/390:
   - Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter)

   - Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390

   - Fix s390 undefined record__auxtrace_init() return value in 'perf
     record' (Thomas Richter)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1
  perf stat: Fix duplicate PMU name for interval print
  perf evsel: Only fall back group read for leader
  perf stat: Print out hint for mixed PMU group error
  perf pmu: Fix core PMU alias list for X86 platform
  perf record: Fix s390 undefined record__auxtrace_init() return value
  perf mem: Document incorrect and missing options
  perf evsel: Disable write_backward for leader sampling group events
  perf pmu: Fix pmu events parsing rule
  perf stat: Keep the / modifier separator in fallback
  perf test: Adapt test case record+probe_libc_inet_pton.sh for s390
  perf list: Remove s390 specific strcmp_cpuid_cmp function
  perf machine: Set main kernel end address properly

Pull ext4 fixes from Ted Ts'o:
 "Fix misc bugs and a regression for ext4"

* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs
  ext4: fix bitmap position validation
  ext4: set h_journal if there is a failure starting a reserved handle
  ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS

The comment claims that this helper will try not to loose bits, but for
64bit long it looses the high bits before hashing 64bit long into 32bit
int.  Use the helper hash_long() to do the right thing for 64bit long.
For 32bit long, there is no change.

All the callers of end_name_hash() either assign the result to
qstr->hash, which is u32 or return the result as an int value (e.g.
full_name_hash()).  Change the helper return type to int to conform to
its users.

[ It took me a while to apply this, because my initial reaction to it
  was - incorrectly - that it could make for slower code.

  After having looked more at it, I take back all my complaints about
  the patch, Amir was right and I was mis-reading things or just being
  stupid.

  I also don't worry too much about the possible performance impact of
  this on 64-bit, since most architectures that actually care about
  performance end up not using this very much (the dcache code is the
  most performance-critical, but the word-at-a-time case uses its own
  hashing anyway).

  So this ends up being mostly used for filesystems that do their own
  degraded hashing (usually because they want a case-insensitive
  comparison function).

  A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS,
  and then this potentially makes things more expensive on 64-bit
  architectures with slow or lacking multipliers even for the normal
  case.

  That said, realistically the only such architecture I can think of is
  PA-RISC. Nobody really cares about performance on that, it's more of a
  "look ma, I've got warts^W an odd machine" platform.

  So the patch is fine, and all my initial worries were just misplaced
  from not looking at this properly.   - Linus ]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The AFFS filesystem is still in use by m68k community (Link #2), but as
there was no code activity and no maintainer, the filesystem appeared on
the list of candidates for staging/removal (Link #1).

I volunteer to act as a maintainer of AFFS to collect any fixes that
might show up and to guard fs/affs/ against another spring cleaning.

Link: https://lkml.kernel.org/r/20180425154602.GA8546@bombadil.infradead.org
Link: https://lkml.kernel.org/r/1613268.lKBQxPXt8J@merkaba
CC: Martin Steigerwald <martin@lichtvoll.de>
CC: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:

 - two driver fixes

 - better parameter check for the core

 - Documentation updates

 - part of a tree-wide HAS_DMA cleanup

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sprd: Fix the i2c count issue
  i2c: sprd: Prevent i2c accesses after suspend is called
  i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()
  Documentation/i2c: adopt kernel commenting style in examples
  Documentation/i2c: sync docs with current state of i2c-tools
  Documentation/i2c: whitespace cleanup
  i2c: Remove depends on HAS_DMA in case of platform dependency

Pull crypto fixes from Herbert Xu:

 - crypto API regression that may cause sporadic alloc failures

 - double-free bug in drbg

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: drbg - set freed buffers to NULL
  crypto: api - fix finding algorithm currently being tested

Pull cifs fixes from Steve French:
 "A few security related fixes for SMB3, most importantly for SMB3.11
  encryption"

* tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: smbd: Avoid allocating iov on the stack
  cifs: smbd: Don't use RDMA read/write when signing is used
  SMB311: Fix reconnect
  SMB3: Fix 3.11 encryption to Windows and handle encrypted smb3 tcon
  CIFS: set *resp_buf_type to NO_BUFFER on error

Pull powerpc fixes from Michael Ellerman:
 "A bunch of fixes, mostly for existing code and going to stable.

  Our memory hot-unplug path wasn't flushing the cache before removing
  memory. That is a problem now that we are doing memory hotplug on bare
  metal.

  Three fixes for the NPU code that supports devices connected via
  NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to
  avoid soft lockups for large flushes.

  A fix for our memory error handling where we would loop infinitely,
  returning back to the bad access and hard lockup the CPU.

  Fixes for the OPAL RTC driver, which wasn't handling some error cases
  correctly.

  A fix for a hardlockup in the powernv cpufreq driver.

  And finally two fixes to our smp_send_stop(), required due to a recent
  change to use it on shutdown.

  Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh
  Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri
  G Bhat"

* tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kvm/booke: Fix altivec related build break
  powerpc: Fix deadlock with multiple calls to smp_send_stop
  cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
  powerpc: Fix smp_send_stop NMI IPI handling
  rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
  powerpc/mce: Fix a bug where mce loops on memory UE.
  powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range
  powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters
  powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy
  powerpc/powernv/memtrace: Let the arch hotunplug code flush cache
  powerpc/mm: Flush cache on memory hot(un)plug

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - PSCI selection API, a leftover from 4.16 (for stable)
   - Kick vcpu on active interrupt affinity change
   - Plug a VMID allocation race on oversubscribed systems
   - Silence debug messages
   - Update Christoffer's email address (linaro -> arm)

  x86:
   - Expose userspace-relevant bits of a newly added feature
   - Fix TLB flushing on VMX with VPID, but without EPT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
  kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
  arm/arm64: KVM: Add PSCI version selection API
  KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
  arm64: KVM: Demote SVE and LORegion warnings to debug only
  MAINTAINERS: Update e-mail address for Christoffer Dall
  KVM: arm/arm64: Close VMID generation race

Pull arm64 fixes from Will Deacon:
 "Nothing too bad, but the spectre updates to smatch identified a few
  places that may need sanitising so we've got those covered.

  Details:

   - Close some potential spectre-v1 vulnerabilities found by smatch

   - Add missing list sentinel for CPUs that don't require KPTI

   - Removal of unused 'addr' parameter for I/D cache coherency

   - Removal of redundant set_fs(KERNEL_DS) calls in ptrace

   - Fix single-stepping state machine handling in response to kernel
     traps

   - Clang support for 128-bit integers

   - Avoid instrumenting our out-of-line atomics in preparation for
     enabling LSE atomics by default in 4.18"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: avoid instrumenting atomic_ll_sc.o
  KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_mmio_read_apr()
  KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()
  arm64: fix possible spectre-v1 in ptrace_hbp_get_event()
  arm64: support __int128 with clang
  arm64: only advance singlestep for user instruction traps
  arm64/kernel: rename module_emit_adrp_veneer->module_emit_veneer_for_adrp
  arm64: ptrace: remove addr_limit manipulation
  arm64: mm: drop addr parameter from sync icache and dcache
  arm64: add sentinel to kpti_safe_list

Pull modules fix from Jessica Yu:
 "Fix display of module section addresses in sysfs, which were getting
  hashed with %pK and breaking tools like perf"

* tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Fix display of wrong module .text address

Pull ceph fixes from Ilya Dryomov:
 "A CephFS quota follow-up and fixes for two older issues in the
  messenger layer, marked for stable"

* tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client:
  libceph: validate con->state at the top of try_write()
  libceph: reschedule a tick in finish_hunting()
  libceph: un-backoff on tick when we have a authenticated session
  ceph: check if mds create snaprealm when setting quota

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 4.17-rc3

  A variety of small things that have fallen out after 4.17-rc1 was out.
  Some vboxguest fixes for systems with lots of memory, amba bus fixes,
  some MAINTAINERS updates, uio_hv_generic driver fixes, and a few other
  minor things that resolve problems that people reported.

  The amba bus fixes took twice to get right, the first time I messed up
  applying the patches in the wrong order, hence the revert and later
  addition again with the correct fix, sorry about that.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ARM: amba: Fix race condition with driver_override
  ARM: amba: Make driver_override output consistent with other buses
  Revert "ARM: amba: Fix race condition with driver_override"
  ARM: amba: Don't read past the end of sysfs "driver_override" buffer
  ARM: amba: Fix race condition with driver_override
  virt: vbox: Log an error when we fail to get the host version
  virt: vbox: Use __get_free_pages instead of kmalloc for DMA32 memory
  virt: vbox: Add vbg_req_free() helper function
  virt: vbox: Move declarations of vboxguest private functions to private header
  slimbus: Fix out-of-bounds access in slim_slicesize()
  MAINTAINERS: add dri-devel&linaro-mm for Android ION
  fpga-manager: altera-ps-spi: preserve nCONFIG state
  MAINTAINERS: update my email address
  uio_hv_generic: fix subchannel ring mmap
  uio_hv_generic: use correct channel in isr
  uio_hv_generic: make ring buffer attribute for primary channel
  uio_hv_generic: set size of ring buffer attribute
  ANDROID: binder: prevent transactions into own process.

Merge tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are some small driver core and firmware fixes for 4.17-rc3

  There's a kobject WARN() removal to make syzkaller a lot happier about
  some "normal" error paths that it keeps hitting, which should reduce
  the number of false-positives we have been getting recently.

  There's also some fimware test and documentation fixes, and the
  coredump() function signature change that needed to happen after -rc1
  before drivers started to take advantage of it.

  All of these have been in linux-next with no reported issues"

* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware: some documentation fixes
  selftests:firmware: fixes a call to a wrong function name
  kobject: don't use WARN for registration failures
  firmware: Fix firmware documentation for recent file renames
  test_firmware: fix setting old custom fw path back on exit, second try
  test_firmware: Install all scripts
  drivers: change struct device_driver::coredump() return type to void

Pull tty/serial fixes from Greg KH:
 "Here are some tty and serial driver fixes for reported issues for
  4.17-rc3.

  Nothing major, but a number of small things:

   - device tree fixes/updates for serial ports

   - earlycon fixes

   - n_gsm fixes

   - tty core change reverted to help resolve syszkaller reports

   - other serial driver small fixes

  All of these have been in linux-next with no reported issues"

* tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Use __GFP_NOFAIL for tty_ldisc_get()
  tty: serial: xuartps: Setup early console when uartclk is also passed
  tty: Don't call panic() at tty_ldisc_init()
  tty: Avoid possible error pointer dereference at tty_ldisc_restore().
  dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
  tty: serial: qcom_geni_serial: Use signed variable to get IRQ
  earlycon: Use a pointer table to fix __earlycon_table stride
  serial: sh-sci: Document r8a77470 bindings
  dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
  serial: imx: fix cached UCR2 read on software reset
  serial: imx: warn user when using unsupported configuration
  serial: mvebu-uart: Fix local flags handling on termios update
  tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
  tty: n_gsm: Fix long delays with control frame timeouts in ADM mode