- 10 Jul, 2007 40 commits
-
-
Robert P. J. Day authored
Here's a slightly cleaner way of creating the /proc structure for the pnx8850. mostly, it creates a directory with default mode 555, since the one you're creating is mode 444, which is somewhat unusual for a directory under /proc. Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Using another systems defines is a safe way to get your code broken by accident when that system is removed. Signed-off-by: -
Ralf Baechle authored
MODPOST vmlinux WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') Signed-off-by: -
Atsushi Nemoto authored
This patch is an workaround for these sparse warnings: linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Ralf Baechle authored
MODPOST vmlinux WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') Signed-off-by: -
Ralf Baechle authored
MODPOST vmlinux WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd40): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init') WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd44): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init') Signed-off-by: -
Ralf Baechle authored
MODPOST vmlinux WARNING: arch/mips/au1000/common/built-in.o(.text+0x1750): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') WARNING: arch/mips/au1000/common/built-in.o(.text+0x1754): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr') Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map MODPOST vmlinux WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms') Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Chris Dearman authored
Signed-off-by:
Chris Dearman <chris@mips.com> Signed-off-by:
-
Atsushi Nemoto authored
Export contents of struct mips_fpu_emulator_stats via debugfs. There is no way to read these statistics for now but they (at least the "emulated" count) might be sometimes useful for performance tuning on FPU-less CPUs. Signed-off-by:
-
Atsushi Nemoto authored
Currently a number of unaligned instructions is counted but not used. Add /debug/mips/unaligned_instructions file to show the value. And add /debug/mips/unaligned_action to control behavior upon an unaligned access. Possible actions are: 0: silently fixup the unaligned access. 1: send SIGBUS. 2: dump registers, process name, etc. and fixup. Signed-off-by:
-
Atsushi Nemoto authored
* Fix pci ops for secondary PCIC * Do not reserve 1MB for PCI MEM region (leave PCIBIOS_MIN_MEM zero) * Use platform_device to provide ethernet addresses for internal NICs. (background: TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way.) * Check return value of early_read_config_word() Signed-off-by:
-
Atsushi Nemoto authored
TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Ralf Baechle authored
Gets rid of some of the CONFIG_MIPS_MT_FPAFF #ifdefery. Signed-off-by: -
Atsushi Nemoto authored
TX39XX and TX49XX have "reserved" segment in CKSEG3 area. 0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on TX39XX are reserved (unmapped, uncached). Controllers on these SoCs are placed in this segment. This patch add plat_ioremap() and plat_iounmap() to override default behavior and implement these hooks for TX39/TX49. Signed-off-by:
-
Atsushi Nemoto authored
Signed-off-by:
-
Atsushi Nemoto authored
Use rtc-rs5c348 and at25 spi protocol driver and spi_txx9 spi controller driver instead of platform dependent codes. This patch also removes dependencies to old RTC interfaces such as rtc_mips_get_time, etc. Signed-off-by:
-
Atsushi Nemoto authored
GPIO 0..15 are for TX4938 PIO pins, GPIO 16..18 are for FPGA-driven chipselect signals for SPI devices. Signed-off-by:
-
Thomas Bogendoerfer authored
- use RTC_CLASS instead of GEN_RTC - get rid of ds1216 in favour of a RTC_CLASS driver - use correct console device for older RM400 - use physical addresses for 82596 device - use 128 byte L1 cache line size (this is needed because most of the SNI caches are using 128 L2 cache lines) Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Marc St-Jean authored
Patch to add default configuration for the PMC-Sierra MSP71xx devices. Signed-off-by:
Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by:
-
Marc St-Jean authored
Patch to add PCI support for the PMC-Sierra MSP71xx devices. Signed-off-by:
-
Marc St-Jean authored
Patch to add mips common support for the PMC-Sierra MSP71xx devices. Signed-off-by:
-
Marc St-Jean authored
Patch to add core platform support for the PMC-Sierra MSP71xx devices. Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Songmao Tian authored
Signed-off-by:
Fuxin Zhang <zhangfx@lemote.com> Signed-off-by:
Songmao Tian <tiansm@lemote.com> Signed-off-by:
-
Fuxin Zhang authored
Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Which will cut down the cost of RDHWR $29 which is used to obtain the TLS pointer and so far being emulated in software down to a single cycle operation. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Franck Bui-Huu authored
Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
This is to break the code of people who think they are supposed to scribble into the pci device structure - it's off limits. Signed-off-by: -
Yoichi Yuasa authored
Signed-off-by:
-
Maciej W. Rozycki authored
This is an optimised implementation of early printk() for the DECstation. After the recent conversion to a MIPS-specific generic routine using a character-by-character output the performance dropped significantly. This change reverts to the previous speed -- even at 9600 bps of the serial console the difference is visible with a naked eye; I presume for a framebuffer it is even worse (it may depend on exactly which one is used though). Additionally the change includes a fix for a problem that the old implementation had -- the format used would not actually limit the length of the string output. This new implementation uses a local buffer to deal with it -- even with this additional copying it is much faster than the generic function. Plus this driver is registered much earlier than the generic one, allowing one to see critical messages, such as one about an incorrect CPU setting used, that are produced beforehand. :-) Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
There are no I/O ports on the DECstation whatsoever in any configuration as neither the CPU nor the peripheral buses used have a concept of such. Signed-off-by:
-
